HT2965 On the latest version of iTunes missing side bar?
Only the store with it moving screen shows up when I open iTunes! How do I get to the page with the sidebar and manually sync to my computer? Or turn on or off the choice to use iCloud?
On a Mac you can re-enable the left-hand sidebar via option-command-S (or the View > Show Sidebar menu option at the top of iTunes) - on a PC you can do it via control-S
Similar Messages
-
When trying to downlead the latest version of iTunes, I got 2 errors:
1. MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem.
Service "Apple Mobile Device" failed to start. Verify your admin ......
2. iTunes was not installed correctly. Error 7 (Windows error 126)
Please help!Do you have Windows XP Pro?
see https://discussions.apple.com/thread/5840089?tstart=0
there is a stupid checkbox you must uncheck, saying "protect my computer and data from unauthorized program activity"
You see this screen when you right-click on the ItunesSetup.exe in your Downloads folder.
downloads>ItunesSetup.exe (right-click)>yourself as admin & UNCHECK THAT BOX!> conntinue with new installation and even find your old playlists still intact!!
This is apparently a Windows XP fix alone. MSVCR80.dll is (probably) reinstalled by Itunes under a partnership aggreement with Microsoft.
Using the Microsoft "Fix It" utility at http://support.microsoft.com/mats/program_install_and_uninstall/en does NOT fix anything. Abandon All Hope Ye Who Run This Utility More Than Once -
I cannot load the latest version of Itunes on my Toshiba PC with Windows 7 Home Premium. Tried to re-install. Dead in the water. Windows error 126. Cant start becasue MSVCR80.dll is missing from my computer
You may have to follow the slightly more detailed steps in whichever of these two applies to you.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
Rebooting into safe mode may be needed to delete any folder the instructions say you should remove. You may also find this Microsoft Fixit helps to remove stubborn components. It has taken some people several attempts to completely clean iTunes and supporting software before they have been able to successfully reinstall it.
tt2
Message was edited by: turingtest2 -
I was upgrading to the latest version of itunes, and my new ipad mini was connected to my computer at the same time, try to sync for the first time. The upgrade crashed part way through, and now itunes won't load and I get an error message saying MSVCR80.dll is missing. How do I do about reinstalling this file?
Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99792) -
After I installed the latest version of ITunes I get a message saying I'm missing the SQlite3.dll file. I have even unistalled the new version and then re-installed, still same message.
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Restart the programme all should be well
In case that your OS is (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Now paste it in the folder C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Restart the programme, it should not display that message, it should be clear.
Good Luck -
I just installed the latest version of iTunes, but when I went to open iTunes I got a message saying registry settings used to for importing and burning CDs and DVDs are missing and I should reinstall iTunes. Really?
I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes -
I tried to install the latest version of iTunes on my Dell laptop but go this message: the program can't start because MSVCR 80.d11 is missing from you computer. Help!
Hi emeldafromaz,
Thanks for using Apple Support Communities. I would recommend trying a thorough reinstall of iTunes as described here:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
Cheers,
- Ari -
The latest version of iTunes does not have the option to locate duplicates. Older versions had an option in the drop down menus of iTunes to "display duplicates." Am I missing something?
I cant find it either. i miss it just knowing its not there
-
Tried loading the latest version of itunes but the download would not complete. Now when I connect my phone to a usb i get an error stating required files are missing, reinstall itunes. I tried that but the reinstall keeps timing out?
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for performance issues or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2 -
Why won't the latest version of iTunes run? I've downloaded it twice. Come to that, why isn't iTunes an option in the product list on this site? Apple did make that, didn't they?
Hey Jim Tracy!
Here is an article that will help you resolve this issue with your iTunes:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Thanks for being a part of the Apple Support Communities!
Regards,
Braden -
Since I downloaded the latest version of iTunes, my remote app on iPad and iPhone does not recognise ,or connect to, my iTunes library... Any ideas ?
Hi Pittgo76,
If you appear to missing your iTunes library after a recent update, you may find the following article helpful:
Apple Support: No content shows up in iTunes after updating
http://support.apple.com/kb/ts1967
Regards,
- Brenden -
Also, the "burn playlist to disc" command has disappeared from the File options. I downloaded the latest version of iTunes but that only restored tracks I'd bought from the iTunes store. I also tried setting up another logon.
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. Note that in iTunes 11 an "empty" library may show your past purchases with links to stream or download them.
In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
Alternatively, depending on exactly when and why the library went missing, there may be a more recent .tmp file in the main iTunes folder that can be copied & renamed as iTunes Library.itl to restore the library to an earlier state. Look for a recent .tmp file that is similar in size to the .itl files in the Previous iTunes Libraries folder. If it has happened repeatedly you may want the earliest such file generated since the last iTunes upgrade.
If applicable, see iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
Should you be in the unfortunate position where you are no longer able to access your original library, or a backup of it, then see Recover your iTunes library from your iPod or iOS device.
I've noticed more of these missing library posts of late and a common factor to most since I started asking is AVG Anti-Virus. It seems in some cases it might be at least part of the reason why the library file disappears. Try excluding the iTunes folder from any AV scanning process.
tt2 -
After importing the latest version of itune, I now get this message: "The I-tunes library file is locked, on a locked disk , or you do not have permission to write for this file. How do I resolve this?
check if you have read & write permissions for your music folder. in the finder, right-click on it and get info. unlock the little padlock (you may have to enter your admin password) and change the permission settings if necessary. next, click on the little gear-shaped icon and apply to enclosed items like so
the important part is to apply to enclosed items !
also, even if it seems unrelated, try the steps in this support article: iTunes: Missing folder or incorrect permissions may prevent authorization -
When trying to download the latest version of iTunes, I receive the following error "Apple Application Support was not found", any suggestions?
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if one component, such as Apple Application Support, won't install normally.
tt2 -
I am using OS 64 bit Windows Vista Home Premium and recently updated the latest version of iTunes. (I only have this CD burning software on my Laptop). Ever since updating, I received the message 'Registry settings for the iTune drivers are missing for CD burning'. The drivers for Lower and uppper filters in the registry are missingand I now have no optical drive. I have unistalled and reinstalled Itunes and manually entered the filters. Have tried everything including something called GEAR driver installer which was suggested on several technical sites. Everything was working fine in iTunes until I updated it.. It's strange I can still import music but not burn?? Friend s have told me they have ha dthe same problem when updating iTunes but resolved the problem by uninstalling/reinstalling or altering registry keys.
Today I went to use my Epson Printer and now have problems with it not working. I decided to uninstall/ install printer software and still can't get it to work either. I may be wrong but his all seems connected to me?
I have been trying for days to get telephone support and been told today you have to pay
Please can someone help me before I throw the lot out the window!!!!Many thanks b Noir
This is a copy of ONEof the keys in the registry I changed as told by Apple support today. I also have changed others as instructed by GEAR software support to manually delete GEAR drivers (that I had installed but couldn't delete some of the others they mentioned from Windows system 32. Then some bright spark at work told me I need the Gear drivers so I downloaded the software and installed again.
Sorry, just this minute went to insert image and it is giving me a message saying this sort of content is not allowed?.
The most recent key I altered is in: HKey _local _machine. System\class - 4D36E965-E325-11CEBFC1-08002BE10318. Upper Filter data: Upper filter NTIDrvr SiRem GEARAspiWDN.
The GEARsoftware info about manually deleting GEAR drive is from:
http://www.gearsoftware.com/wiki/index.php?title=DRIVERS:_Windows_-_Updating%2C_ removing%2C_64_bit_versions%2C_etc
I hope you can help
Maybe you are looking for
-
Numbered lists in text boxes automatically updating
I have seperate text boxes that are involved in numbered lists, and I want to be able to reorder the text boxes so that they automatically update the numbers within them. How do I do this?! As you can see when I move the text box containing 2.0 numbe
-
Hi, I have developed ALV Grid Report. It is working fine. But while i am coming from alv grid display to program by pressing BACK button it is showing one more screen which is empty. Again I press back button it is coming to selection screen. I don'
-
After installing the latest update of Safari I notice something odd after I rebooted but I guess my machine rebooted ok. Now it appears to have shat the bed and I can only reboot OK 1 in 20 times. Here is what happens: On a reboot, black screen, anno
-
Very urgent: regarding display of parent material
hi, i had been working on dis report and i hae to display the parent material on top and sub material in dis BOM structure report. plzz help me out as i have to submimit dis report with 1 hour as help will be definately rewarded. TABLES: MBEW,
-
Solution Manager migration to other host
Hi, we have just started a SAP SolMan migration with the SAP migration process export and import. In the source system we have SolMan 7.01 both ABAP and Java, but also an Java instance of Redwoods CPS. We now encounter allot of problems when we run t