HT3046 I have a Powerbook G4 that I have not used for a number of years.  I believe there are photos on it that I want to retrieve.  The unit will not power on and there is no evidence it is alive.  Neither the wall plug in or a new battery helped.  Sugge

My G4 will not power up.  I installed a new battery and still nothing.  Help.

Try taking out the main battery and letting the PB sit turned off but plugged into wall power for 24-48 hours. Then reinstall the main battery and try a start.
When you try to start it, do you get any sounds, like the Mac "chimes" or hear the hard drive or optical drive spin up? If you get those sounds, try holding teh SHIFT key during startup; keep holding until you see a desktop and then lt go the key. Don't try using the comptuer at this point--it won't have all needed extensions loaded. Simply try a normal start to see fi that gets a regular desktop,
Do you have the system install/restire disks that came with the computer, or retail install disk? Both are bootable. Try booting from one of those optical disks. Hold the c key to force booting from the optical drive.

Similar Messages

  • I have a mid-2009 MBP and I've been using my BOSE Companion 20 with it for about half a year now. It was fine until recently, when i want to adjust the volume using the pod on the BOSE Companion 20, it will cause like a surge in volume, spiking it up

    I have a mid-2009 MBP and I've been using my BOSE Companion 20 with it for about half a year now. It was fine until recently, when i want to adjust the volume using the pod on the BOSE Companion 20, it will cause like a surge in volume, spiking it up and down. It will not stablise itself! It's very fustrating. Anybody with the same issue?

    I have the BOSE Companion 5 speakers and have had the same problem. I've searched everywhere and gotten nowhere. My speakers are way past their warranty, so calling Bose would probably get me no where either. Only thing I can think of is that the speakers overheat which causes the spikes in the volume. I've tried unplugging them for a few minutes and then plug them back on. The problem does go away, but after about 5 minutes, same problem.

  • My Fantom backup drive is failing. I want to copy the time machine contents to a new backup drive and continue on as if nothing has happened.  Can I do this and if so how?  I have intel iMac running Mountain Lion.  Fantom Drive via Firewire 800.

    My Fantom backup drive is failing and I have to send it in for warranty repair.  Before I do that I want to copy the time machine contents to a new drive and then use it for the backup, continuing on as if nothing had gone wrong with the first drive.  Can I do this?  Is it as simple as duplicating the first drive and replacing it with the second? New drive arrives Tuesday PM and both drives have dual firewire 800 ports.  

    I have used the Disk Utility to verify the contents of the backup drive so I don't think I have any corrupt files.  The drive just takes a minute or so to spin up to speed.  If I turn it off and then back on, it beeps at me for a few seconds and then starts it's slow process of trying to spin.  I think it's a power problem not a data problem.  I have my fingers crossed that it holds on until Tuesday PM when the new drive arrives.  I'm thinking that my two options are to duplicate the bad drive or partition the new drive and put the old backups on one partition and start afresh on the second partition.  Any input?
    And thanks to both of you for the valuable information so far!

  • I have a separate apple id and my daughter bought a song using my ID rather than hers.  Now I've got this song that I don't care for and have no use for.  Is there a way to get it to her ID short of burning it on to CD and then uploading it to her phone?

    I have a separate apple id and my daughter bought a song using my ID rather than hers. She was playing on my computer and bought it, thinking it would download to her phone through the cloud. Now I've got this song that I don't care for and have no use for.  Is there a way to get it to her ID short of burning it on to CD and then uploading it to her phone?

    sure pretty simple.  make a backup of your current settings
    http://support.apple.com/kb/HT1766?viewlocale=en_US
    then restore device from old backup you need pics off of
    then import pics to computer
    http://support.apple.com/kb/HT4083
    you may need to save pics to camera roll first
    then restore the new backup and sync pics back to phone via itunes
    Peace, Clyde

  • HT1750 I tried to change the memory and now my Imac will not power on. and there are no beeps. what did I do wrong?

    I tried to change the memory and now my Imac will not power on. and there are no beeps. what did I do wrong?

    Don't know.  Could be any number of reasons.  Re-read the how to install RAM manual again for your model iMac.  Double & triple check to make sure you purchased the right RAM chips.   Make sure they are seated properly.  If you didn't hear a snap when seated, the RAM is not properly seated. 

  • I have an ipad 2 that is mounted horizontal in the wall. added the iaqualink pool control app. but the app does not have the ability to turn horizontal. is there anyway to manually turn and lock the app.??

    i have an ipad 2 that is mounted horizontal in the wall. added the iaqualink pool control app. but the app does not have the ability to turn horizontal. is there anyway to manually turn and lock the app.??

    Yes.
    http://ipadinsight.com/ipad-basics/how-to-add-a-website-to-your-ipad-home-screen /

  • I have some dts cd's that I want to import into itunes on a windows pc and then play back on my apple tv 3 (i think its 3, about 9 months old) to listen to through my onkyo amp via hdmi as dts, when I play back I just get white noise.

    I have some dts cd's that I want to import into itunes on a windows pc and then play back on my apple tv 3 (i think its 3, about 9 months old) to listen to through my onkyo amp via hdmi as dts, when I play back I just get white noise. I have seen lots of old posts which go on about converting files but am wondering wherher at the current time with the latest versions of itunes and apple tv whether this should by now be a virtual play out of the box solution.
    I have tried connecting my atv to the amp by optical cable but that didnt produce anything better and am assuming that a hdmi cable should be able to reproduce everything an optical cable does.
    Is this something I should be able to achieve without having to recode the files?
    Tracks are imported to itunes as apple lossless, have tried setting the atv audio settings to auto and 16 bit, neither works yet I was told some time ago by an apple rep that the atv shoud be able to handle any type of audio as it just passes it to the amp to decode. I am not stupid but not that technical when it comes to audio and bitrates etc so any explaination would be appreciated.
    Thanks in advance for any help

    Willy, the procdedure you describe works perfectly for AppleTV G1. In fact, I frequently play DTS music discs ripped to my iTunes library as Apple Lossless (ALAC) and synched to the ATV. What happens is that, as far as iTunes and the ATV are concerned, a conventional stereo 16/44 audio file is being played; however my reciever detects the DTS data stream, and instead of outputting static, it decodes the 5.1 channels correctly. This process parallels the way DTS discs were designed to be played back: a conventional CD player is connceted, via digital out, to a DTS-aware reciever/pre-amp and the two channels of static are recognized as 6 channels of DTS-encoded audio.
    However this process will only work if the player (CD, ATV, PC, etc.) sends a "bit-perfect" 16 bit/44.1 khz data stream to the decoding device. In the case of ATV G2 and G3, as has been discussed elsewhere, the unit resmaples all audio - including 16/44 PCM (Redbook CD)  - to 16/48. While this is not a big deal for conventional audio CDs, MP3s, and AAC files, it mangles the fragile DTS datastream and renders it undecodable. The resulting static that you hear is just like the static you would hear if you played a DTS CD on a non-DTS capable system.
    Sadly, I'm not aware of any easy way around this. You could use a program like Foobar (and the DTS plugin) to convert your DTS CDs to 6-ch .wav or .flac file. From there you could transcode the file to AC-3 and then mux it into a video container that ATV supports. You may need add a dummy video track, for iTunes/AppleTV to be ok with the file, though I'm not sure. This may be a lot of work.
    Sorry for the bad news. I wish that the iTunes/ATV ecosystem had better multi-channel audio support.
    Steven

  • I have an external hard drive that I have been using for years.  All of a sudden my mac will not recognize the external as a "save as" device location.  But the external does show up on my desktop and I can open it to drag and drop items. Help.

    I have an external hard drive that I have been using for years.  All of a sudden my mac will not recognize the external as a "save as" device location.  But the external does show up on my desktop and I can open it to drag and drop items.  What happened and how do I get my mac to rerecognize the device?!?!?

    Hi,
    Check Finder>Preferences>Sidebar, is it checked there to show external drives?

  • Something went wrong with my apple tv and now it says that it is in retail demo mode. How can i fix it?  I have had it for more than one year without any problem

    something went wrong with my apple tv and now it says that it is in retail demo mode. How can i fix it?  I have had it for more than one year without any problem

    To turn on/off retail mode, go to settings, general, legal.
    Do not open legal, just put the cursor there.
    Then, on the remote, type this sequence : right - right - left - center.
    The AppleTV should reboot.

  • I got a new ipad2 for Christmas and I am unable to get it to accept my password for my wifi. I am using the same password that I have always used for all of my other devices. Can somebody help me????

    I got a new ipad2 for Christmas and I am unable to get it to accept my password for my wifi. I am using the same password that I have always used for all of my other devices. Can somebody help me????

    Hi there
    I had the same trouble today, I kept entering the sky password but would not accept, my iMac and iPod work ok but just could not get my iPod to work. But I found the fault, the password is case sensitive and mine on sky is in caps, the up arrows on the keypad put the caps on,but after each letter you must put the caps back or it wil revert to lower case, I hope this may help you

  • I have a 10.8.5 and need iphoto 9.whatever to order photo books but can't upgrade iphoto or the os unless I get a new computer is there a work around?

    I have a 10.8.5 and need iphoto 9.whatever to order photo books but can't upgrade iphoto or the os unless I get a new computer is there a work around?
    Thanks John
    <Email Edited By Host>

    Mac OS X does not offer a Clean install option.    If by clean install you mean erasing the system, that is not recommended unless:
    1. You bought a used/refurbished Mac and there is software on it without any accompanying discs, and it is older than July 20, 2011 in model release:
    https://discussions.apple.com/docs/DOC-6413
    Or if it is at or newer, then erase it if it has applications installed that would not have been prebundled with it and you have no CDs for those applications.
    You don't want someone else's software keys, or accounts, or to be running unlicensed software.  At and newer Macs offer a built-in internet restore for their software with a command-R boot that lets you erase the system with Disk Utility, and then install from the internet the latest operating system.
    2. You have a hardware issue and want to eliminate possible software issues as the cause when troubleshooting a problem all at once.
    Issues affecting a new install have to be isolated before you attempt it.   Unless you know it is software or hardware, erasing may only mask other problems.

  • ICloud got deleted off my MacBook Pro. Is there any way to get it back? I have an iphone now and actually have a use for it.

    iCloud got deleted off my MacBook Pro. Is there any way to get it back? I have an iphone now and actually have a use for it.

    Your signature says you have 10.6.8 - is this correct? (It it isn't please amend it to prevent confusion).
    Assuming Snow Leopard, iCloud has not been deleted - it was never there. The minimum requirement for iCloud is Lion 10.7.2 (Mountain Lion preferred): the iCloud Preference Pane does not appear on earlier systems - the MobileMe pane appears on Lion and earlier but is non non-functional - you cannot now open or access a MobileMe account.
    You can set Snow Leopard up to access the email on an existing iCloud account which has been set up on a compliant device, and you may be able to sync iCal using an unsupported (and possibly unreliable) hack, but no other facilities will work. You cannot open an iCloud account on Snow Leopard.
    This page outlines the limited use you can make of an existing iCloud account with Snow Leopard:
    http://www.wilmut.webspace.virginmedia.com/notes/icloudSL.html
    To make full use of iCloud you will have to upgrade your Mac to Lion or Mountain Lion, provided it meets the requirements.
    The requirements for Lion are:
    Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
    2GB of memory
    OS X v10.6.6 or later (v10.6.8 recommended)
    7GB of available space
    To purchase it you will have to ring Apple at the number given at the bottom left of this page.
    The requirements for Mountain Lion are listed here:
    http://www.apple.com/osx/specs/
    It is available from the Mac App Store (in Applications). (If you are currently pre-Snow Leopard you will have to upgrade to that to access the Mac App Store: it's available in the online Apple Store.)
    You should be aware that PPC programs (such as AppleWorks) will not run on Lion or above; and some other applications may not be compatible - there is a useful compatibility checklist at http://roaringapps.com/apps:table

  • My iPod touch will not power up and is not recognized by my comptuer anymore

    Good afternoon, my ipod touch (4th Gen) will not power up and is not recognized by my computer anymore. I have attempted to restore but that did not work. I have also charged for several hours. Any suggestions? Thanks!

    I have already tried that as well and unfortunately it did not work.

  • Why isn't remember me working on sites that I have been using for years on my iPad but fine on my iPhone?

    Why isn't remember me working on sites that I have been using for years on my iPad but fine on my iPhone?
    Both have recently been updated with IOS7

    Does the iOS device connect to other networks?
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • I have an old Ipod 5th gen that I have been using for downloading music from my library.  Upon purchasing an Ipod touch and registering it in Itunes, I can no longer sync tunes to my old ipod.  How can I get that option back on my old ipod?

    I have an old Ipod 5th gen that I have been using for downloading music from my library.  Upon purchasing an Ipod touch and registering it in Itunes, I can no longer sync tunes to my old ipod.  How can I get that option back on my old ipod?

    - iTunes purchases by maybe
    iTunes Store: Transferring purchases from your iOS device or iPod to a computer
    - For other music you need a third-party program like one of those discussed here:
    newer copy
    BTW, this is the iPod touch forum.

Maybe you are looking for