HT3060 bluetooth keyboard detected by macbookpro but does not connect

blue tooth keyboard detected by macbookpro but does not connect it. bluetooth mouse works fine

Hi ..
Try this support article > Bluetooth Quick Assist

Similar Messages

Bluetooth ANYCOM FIPO Pairs with iMac but does not connect

Bluetooth ANYCOM FIPO Pairs with iMac but does not connect. Have paired and connected iMac to Bluetooth Keyboard, Mouse and a Plantronics Headset without issue. I have a Dell Latitude D620 that paired and connected with the ANYCOM FIPO so I know the device works. It is currently plugged into the iDock port in a Bose SoundDock..
Bluetooth Device Details.
Devices (Paired, Favorites, etc):
FIPO:
Name: FIPO
Address: 00-07-88-a0-12-ce
Type: Headset
Services:
Paired: Yes
Favorite: Yes
Connected: No
Apple Bluetooth Software Version: 1.9.0f8
Hardware Settings:
Computer:
Address: 00-14-
Manufacturer: Cambridge Silicon Radio
Firmware Version: 3.1965 (3.1965)
Bluetooth Power: On
Discoverable: Yes
HCI Version: 3 ($3)
HCI Revision: 1965 ($7ad)
LMP Version: 3 ($3)
LMP Subversion: 1965 ($7ad)
Device Type (Major): Computer
Device Type (Complete): Desktop Computer
Composite Class Of Device: 1057028 ($102104)
Device Class (Major): 1 ($1)
Device Class (Minor): 1 ($1)
Service Class: 129 ($81)
Requires Authentication: No

You may have to enter device code like 000 in phone so it can pair up.
Try checking the box you mentioned
Check the manual for your Bluetooth device it will tell you the code Read all of it!!!!!
Try turning on Bluetooth just as phone is put in search mood.

After recent upgrade Mozilla will open but does not connect - I have Norton Antivirus.

After recent upgrade Mozilla will open but does not connect. I have uninstall/reinstalled several times. I have NortonAntivirus.

It is possible that your security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full, unrestricted, access to install for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
*https://support.mozilla.org/kb/fix-problems-connecting-websites-after-updating
Do a malware check with several malware scanning programs on the Windows computer.
Please scan with all programs because each program detects different malware.
All these programs have free versions.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware: http://www.malwarebytes.org/mbam.php
*AdwCleaner: http://www.bleepingcomputer.com/download/adwcleaner/ http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
*SuperAntispyware: http://www.superantispyware.com/
*Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender: http://windows.microsoft.com/en-us/windows/using-defender
*Spybot Search & Destroy: http://www.safer-networking.org/en/index.html
*Kasperky Free Security Scan: http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*Anti-rootkit utility TDSSKiller: http://support.kaspersky.com/5350?el=88446
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked
*https://support.mozilla.org/kb/troubleshoot-firefox-issues-caused-malware

TS3253 Is my original iPad compatible with iHome DM12 wireless speaker. I am having trouble with pairing. The iPad sees the device but does not connect

Is my original iPad compatible with iHome iDM12 wireless speakers? I am having trouble pairing. iPad sees device but does not connect.

It should be it the iHome supports the bluetooth profiles that the iPod supports. See:
iOS: Supported Bluetooth profiles
Try resetting the iHome if it was previusly paired to another device.
Also see:
'iOS: Third-party Bluetooth headsets, headphones, and keyboards

I have a MacBook Pro. My mac can detect wifi. But will not connect. I did get connected vis TCP/IP settings but I can't connect to any wifi anywhere. Network diagnostic has a green light for wi-fi and wi-fi settings. Red light for the rest.

I have a MacBook Pro. My mac can detect wifi. But will not connect anywhere. I did get connected via TCP/IP settings but I can't connect to any wifi anywhere. Network diagnostic has a green light for wi-fi and wi-fi settings. Red light for the rest. (Network settings, ISP, Internet and server.)

Hello NotAppleSavy,
Thanks for the question. After reviewing your post, it sounds like the computer wont connect to networks. I see you have used network diagnostic. I would recommend that you read this article, there are a lot of other things you can do in this article that may be able to help you resolve or isolate the issue.
Wi-Fi: How to troubleshoot Wi-Fi connectivity
Thanks for using Apple Support Communities.
Have a nice day,
Mario

Carrier issues, Iphone 3gs: Carrier is in the carrier list but does not connect = no service

Right introduction, I live in the country signal for iphones under 02 in my area is 3-4 bars of GPRS signal. This is plenty to make and receive calls, texts and all that as use home wifi for internet simple. Everything working fine for about a year of having the phone, then did updates and started to see the "no service" almost all the time and had to place my iphone in a signal spot just to get 1-2 bars and couldn't touch it without dropping out! Basically I could not use it at all and the crap about the signal now showing true signal is rubbish as before i could make calls fine and no drops, but now due to "no service" i can't make any calls or texts or anything. I have a ipod touch when nothing HAS CHANGED other than i can think when the update to 4.0 came along! I have been living with this for almost a year. I have done every possible solution, apple stores, 02 stores, new sim cards (many), every type of phone resetting possible, manually turning off 3g and other settings to turning everything off bar just basic GPRS signal. Network resets everything possible no joy what so ever.
I have been paying for a year now for a phone that i can't use anywhere other than right next to a signal tower! Yes the phone connects to GPRS, EDGE, 3G when in town but just about. Before these problems i could get max 3G signal in my local town no issues but now struggle to get 1 bar of 3g in a town as well. The problem is I used to be able to use my phone as a phone where i needed to use the phone. Now i can't use the phone anywhere and get drop calls all the time when i do manage to get signal!!!!!!!
Now i can't even connect to 02, yet at home under a manual carrier search all UK networks appear on the list including 02, I click on 02 and it comes up with the warning "network lost see settings" So my phone CAN find signal but does not connect to 02. This has been the case for a long time now and as stated before several sim cards latter and plenty of trips to apple and changes of phone make NO difference which makes me believe this is a software issue on apple's part. I only started getting these issues when the iphone 4 came out and updated the ios. Now what can i do, i can not downgrade the ios as i never jailbreaked my phone so don't have the files stored that i should to be able downgrade. Apple are offering 0 help with this, all i want to do is smash it to bits as it no longer works as a phone. I have to use a 10 year old nokia to call and actually use my contract that I PAY FOR. I PAID FOR MY PHONE and just after the warranty runs out as well and it seems all a software problem.
I have searched all over the net to find no solutions to my problems this is a last resort before i do actually smash the thing and I love apple to bits but come on a simple software issue.
I mean isn't it silly that i can't downgrade my ios and that apple don't support this and yet my issue seems to lie in there update.
I know that the signal update reworked the algorithm to show true signal XXXXXXXXXXXXXXX um no it doesn't as now i have 0 signal as before i had no problems what so ever with dropping calls and the signal showing right so WHY WHY WHY.
Please help I am so frustrated with things and need to solve this issue. Please ask anymore questions if you want more details about anything, i need to sort this out please.
By the way i am running ios 4.3.3 yet bellow in the options this is not stated?? I have been updating hoping that it gets solved but only seems to get worse the more i update.
Thanks
James
Thanks
James

Same problems, unfortunatley I updated to 5.0 1 hour before going on holiday for three weeks and no way to restore my phone to try to remove it.At the same time, drop outs, range problems and the most annoying was my music and apps were corrupted and would not function properly :-(

I have a lenovo S410 Touch laptop -with windows 8.1 -Itunes 11.1.1 ,i am trying to connect my iphone 4s but does not connect , it shows that it wants to connect , how can you connect this?

I have a lenovo S410 Touch laptop -with windows 8.1 -Itunes 11.1.1 ,i am trying to connect my iphone 4s by USB cable but does not connect , it shows that it wants to connect , how can you connect this?

http://support.apple.com/kb/ts1538

Applet detect new particeipent but does not show any output.

hi,
I have written one applet which uses AVReceive2 as inner class.
This applet detects new particepent joined but does not take any action like showing or playing movie.
I cant understand where I am wrong.

Doublechecking, KAT ... is the Device Screen looking a bit like the following screenshot?
Which particular Windows OS are you using? (XP, Vista or 7?)

HT1752 iMac flat panel 2003 shows airport but does not connect

Hi,iMac flat panel 2003 shows airport but does not connect

No problems.
Let's double-check your iMac's Internet Sharing configuration:
To setup for Internet Sharing (Wired to Wireless):
Setup the Network
Cable Modem > (Ethernet cable) > \[Ethernet port] iMac > (wireless) > MacBook
Enable Software Firewall (iMac)
System Preferences > Security > Firewall
o Block all incoming connections (enabled)
Enable Internet Sharing (iMac)
System Preferences > Sharing
o Select "Internet Sharing" from the options in the left column
o Share your connection from: Built-in Ethernet
o To computers using: AirPort (checked) (Note: Uncheck all other entries in the list.)
AirPort Options... (iMac)
o Network Name: <anything you want>
o Channel: Automatic
o Enable encryption <do NOT enable at this time>
o Click OK
o Select "Internet Sharing" again
o Click "Start" to start Internet Sharing
o Click Start
Please verify these settings, and try accessing the Internet from the MacBook again. For this exercise, I suggest co-locating the MacBook with the iMac.

Landline phone calling out rings at destination but does not connect at home

When calling out to someone their phone rings and they hear us but the call does not connect on our end

Sorry to hear about your problem. Is this happening on every phone you use in the house? Cordless or Corded phones? Do you receive incoming calls fine?
Anthony_VZ
**If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan

BB recognized by computer & Desktop Manager, but does not connect?

All right, I've scoured these forums and can't figure this out. Tell me if I've missed something.
Blackberry is recognized by my computer AND by Desktop Manager, but does not fully connect so I can sync. I can see it in My Computer, and the Desktop Manager does recognize the model of smartphone when it's plugged in. Both Windows, and Desktop Manager ask me for my password when I connect the USB cord. However, it just says 'connecting' in the bottom right, and never gets past that. When the phone is initially plugged in, the screen goes to the clock (normal), and flashes the 'connection' screen (BB and computer icons connecting with a cord). It flashes that screen twice then goes back to the clock. The Desktop Manager then just keeps trying to connect, until I unplug it. Both the computer and desktop manager recognize when I've unplugged it.
Running:
Windows 7, 64bit
Desktop Manager 6.1.0.35
Blackberry Tour 9630
This is a new computer. I was running Windows XP with Desktop Manager 6.1.0.35 previously, and it worked no problem, but that is no longer an option.
The goal is to be able to sync with Outlook 2007. Need very badly to be able to do this.
Did all the simple stuff:
Oh so many Windows restarts,
Blackberry battery pull, both unplugged and plugged into computer with Desktop Manager running,
Desktop manager reinstall,
plugged into every different USB port,
tried a different cord.
Went deeper:
BB USB drivers fully up to date
Turned OFF USB power management on all my ports in device manager,
Disabled USB selective suspend setting
Deleted my intellisync folder in appdata/roaming,
Turned off Windows UAC notifications,
Tried every combination of BB memory compression on and off, or mass storage mode on and off,
There might be more I've tried but don't remember. I've been searching the net for days now.
Please let me know if there's anything else I can try. This is a serious issue for me right now, I need to be able to sync with Outlook 2007.
Thanks in advance

See:
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
or
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP

Display issue - My macbook pro 2011 detects my display but does not display an image

Hi, I am having a problem connecting my MacBook Pro (2011) to my HP 2511x display. I used the display all morning with my mbp connected and closed. When I came back, after the computer went to sleep, I cannot get any image on the display. The computer detects the display but no image appears.
I have tried-
Installing the latest firmware and software updates
restarting both the computer and monitor
trying all of the possible display arrangements and settings for resolution and refresh rates
Also I am connected using a minidisplay to DVI adaptor in the thunderbolt port.
Any and all suggestions appreciated.
thanks.

Hello Aminetti,
It sounds like your computer goes to sleep, and will not wake up, so you must manually restart your computer. I recommend the troubleshooting in the following article:
OS X: When your Mac doesn't sleep or wake
http://support.apple.com/kb/TS5357
Reset SMC
Reset NVRAM/PRAM
Test with external devices disconnected
Try Safe Mode
Try another user account
Thank you for using Apple Support Communities.
All the best,
Sterling

On ipad to hp 6500A printer, message says contacting printer, but does not connect.

New 6500A prints wirelessly ok from vista laptop and desktop. also prints from ipad printbureau app. but when printing direct from ipad email or pic, I get message that it is "contacting printer", but will not go any further to connect

I have the HP Envy--but it's at my studio and I'm at home so I'm going off memory here, and my understanding of networking is,shall we say, limited. But, as the HP Envy is an AirPrint printer, you don't need Print and Share or any of the other wireless printing apps (although I have Print and Share).
I have a WiFi iPad 2. After Setting up the Envy, I just joined a local wireless network using the Envy touchscreen and then joined that same network on my iPad. Then, when I choose Print in, for example, Pages, the Envy appears after the Select Printer option.
All I can suggest is to make sure the Envy has a connection to the same wireless network as your iPad. (in my case I have to select a local network which does not have Internet access as my Envy isn't registered on the university-wide network.)
(I did complete the initial setup of the Envy on my laptop (MacBook Pro) (and which requires a USB cable for setup) and that gave me printing and scanning options from my MacBook. I don't see how that would have any bearing on the AirPrint function from the iPad.)
(I do think that the Envy printer is an amazingly useful little printer, especially with the ability to scan to a flash drive or SD card.)

Ie 8 - tab shows connecting but does not connect

IE 8...have reset ie properties, rebooted, un-installed and re-installed.   Am able to connect from safe mode w/ networking.   Have tried to download firefox from google chrome, but I get....you are not connected to the internet...hit
OK or cancel.  What other options to get ie working?

My Norton 360 also seems to disappear after I open it and there is no icon in the navigation area.
That sounds like a program which is opening off-screen, possibly on another monitor. Look at the Taskbar icon involved and see if it has a thumbnail. If so, hovering over it would show its Preview and clicking on it would switch to it.
Then you could right-click on the thumbnail to see its window's state, e.g. typically Restore grey and the rest all operational.  Move would allow you to move it. Since you would not have any obvious way of attaching it to your mouse pointer
you would start by using an arrow key. In fact, one or two keystrokes would be enough to engage your pointer and change its icon to a move pointer icon. Then just drag the window to where you want it.
Oh, you mentioned "the navigation area". Are you implying you never see a window for that feature, e.g. it is always hidden? What about Task Manager does it know what state the thing is in? How are you supposed to configure or
check on it otherwise?
FWIW I would definitely be suspicious of Norton as the cause of the blockage. Unfortunately others have found that trying to disable it in order to avoid its interference is not enough, so then it has to be removed and in some cases apparently the
uninstall is faulty and a cleanup program must be obtained from Norton to be rid of it completely.
Robert Aldwinckle

Ipod Touch Charges but does Not connect.

Hello,
I do not know much about computers and even less on how to fix any issues but here is my problem
When I connect my Ipod Touch, it will charge but will not show up in my computer. I have a Dell Laptop Windows 7.
here is what I have tried
Uninstalled Itunes and then Reinstalled it. (I deleted Everything related to iTunes)
Rest iPod by holding the Power and Home button. I even Turned it off and then On.
I went into my Computer under Services and Stopped then started my Apple Mobile Device and made sure it was on Automatic Start Up Type.
Plugged it in my Sister's Laptop and it installed the linked to her iTunes no problem.
ANy ideas?

Did you do everything here:
iOS: Device not recognized in iTunes for Windows
Including
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
New cable and different USB port?
Runs this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests

HT3060 bluetooth keyboard detected by macbookpro but does not connect

Similar Messages

Maybe you are looking for