HT3069 Does this table mean that I cannot buy MLB.TV in New Zealand?

The table shown on the Apple TV of countries in which content is available says that NZ can only rent movies, not buy movies and not buy TV shows.  I had hoped to purchase MLB.TV (if my bandwidth is high enough).  Does this table mean that MLB.TV is not available in NZ? 

This response was little help to me.  The MLB logo shows up in the default menu of the Apple TV device.  That says to me that Apple and MLB are working together to offer the service, but there are no indications on the screen as to what is available in each jurisdiction.
In the end I found that I was able to buy the MLB broadcast (if that is the right word) through the menu on the Apple TV.  The very poor display of the Apple TV network test left me no clearer as to whether or not I would have sufficient bandwidth.  I decided to purchase one month of MLB to try it out and ended up paying  a bit over $30 for the month rather than $24, and it came up as a RECURRING charge!   The display of the game was reasonable (not great), and there were a few times it stalled, but generally it was all right.
I have also created a task in my Outlook to cancel the subscription before the 30 days expires.
If I decide that I want the season I'll try to find a way to buy the season through MLB at $99 rather than 12 times $30!

Similar Messages

  • HT201270 Hello, I followed the instructions on my iPhone4s by going to Sett Gen About and nothing was new even thou I was advised to update as soon as I plugged into my Mac for a backup. Does this just mean that it tells all iPhone users to check just in

    Hello All,
    I followed the instructions when I plugged in my iPhone 4s to do a backup on my Mac. I was then prompted to update carrier settings by going to Settings>General>About. I did as instructed and nothing was new, even though I was advised to update as soon as I plugged into my Mac for a backup. Does this just mean that it tells all iPhone users to check for any available updates just in case ?

    Updating carrier settings isn't the same as updating iOS. You don't get any new or different features. It just affects, ostensibly for the better, how your phone connects with your carrier's network.

  • What does this message mean, "The iPad cannot be synced.  You do not have enough access privileges for this operation?"

    I need some help syncing my iPad.  I get a message about not having enough privileges for this operation.  Any help would be appreciated.
    Thanks,

    It means you are using windows and the user agent stuff is messed up.
    Try looking at permissions on the drive iTunes library is on.

  • HT4085 So does this mean that I cannot have rotation lock off and the mute function off at the same time? In other words, can I have my screen rotate automatically as I hold my iPad in either portrait or landscape AND hear sounds from my apps at the same

    So does this mean that I cannot have rotation lock off and the mute function off at the same time? In other words, can I have my screen rotate automatically as I hold my iPad in either portrait or landscape AND hear sounds from my apps at the same time?

    In other words, can I have my screen rotate automatically as I hold my iPad in either portrait or landscape AND hear sounds from my apps at the same time?
    Yes, you can. You can configure the Side Switch (above the volume button) either as Mute switch or Rotation lock.
    Settings > General > Use Side Switch to: choose what you like the Side Switch to function as.

  • Traded in my iPhone for a different brand of phone. I had no idea that I had to sign out of iMessage before doing this. Now, my old phone is gone and my new phone cannot receive texts from people who have iphones and had me as a contact before. They try t

    Traded in my iPhone for a different brand of phone. I had no idea that I had to sign out of iMessage before doing this. Now, my old phone is gone and my new phone cannot receive texts from people who have iphones and had me as a contact before. They try to send an iMessage and I have no way to receive an iMessgae now. On some server somwhere my AppleID still tells people they should send me iMessages. What is the solution to this issue? Deleting my AppleID would work to solve this issue, but I cannot ever delete the ID? What can Apple do for this?

    If you did not erase your apps and data before getting rid of your old phone, try using Find My Phone and erasing everything remotely. See if this works.

  • While importing a CD into my iTunes library I kept getting the following error message- iTunes library cannot be saved- An unknown error occurred (-54).  What does this error mean and what can I do about it??

    While importing a CD into my iTunes library I kept getting the following error message- iTunes cannot be saved- An unknown error occurred (-54).  what does this error mean and what can I do about it??

    The CD I imported (in the above post) is now not in my iTunes library. Any help would be appreciated .

  • I have just tried to sync my iphone. Error message saying it cannot be synced has popped up quoting error code (-50). I have just removed old iphone backups from itunes but was very careful to not delete the current one. What does this code mean?

    Hi there,
    I have just tried to sync my iphone.
    Worryingly an error message saying it cannot be synced has popped up quoting error code (-50)
    I have just removed old iphone backups from itunes but was very careful to not delete the current one
    What does this code mean?

    http://support.apple.com/kb/TS1583

  • TS4062 I cannot get a WiFi signal, which means that I cannot access all of the other features on my ipod. Is there anyway I can access all of the other features without Siri or WiFi?

    I cannot get a WiFi signal, which means that I cannot access all of the other features on my ipod. Is there anyway I can access all of the other features without Siri or WiFi?

    Hi. The two user tips both describe a sequence of steps that should get your library from the point where it threatens to wipe data from your device to where it is syncing normally, while recovering as much information as possible. It may still be necessary to wipe and reload the device but this should only take place once all the data that can be recovered has been recovered.
    Doing step 1 of 8 and then complaining things aren't the way you want them to be yet strikes me as premature...
    Since you appear to have all your media content, and we are discussing an iPod classic, not an iOS device, the main worries are already taken care of. What's left is ratings, playcounts, playlist membership and checked status. Since your device holds only part of your library at best you could only recover the missing data for the content that is on the device using third party tools.
    Recreating the previous checked/unchecked status of every track in your library from where you are now may not be that easy. Syncing with selected playlists has many advantages, one of which would have been that you would have a named playlist that could have been retrieved by 3rd party software if you had used this method.
    You haven't explained what caused your problem in the first place, but if you have a Previous iTunes Libraries folder holding old copies of your iTunes database (generated with each iTunes update) then it would be possible to restore the most recent of these and then update the library with any changes in your media folder.
    BTW Apple doesn't offer free support for this kind of issue with iTunes.
    tt2

  • What does this message mean Charging is not supported with this device?

    What does this message mean Charging is not supported with this device?

    You've gotten 2 good answers already, but there's a key assumption in both that you got the message when connecting the iPhone to some other device. If this is the case you can get an adapter in the Apple online store that will allow charging from older devices.
    If, however, this message appears when you are not connected to anything the problem is dirt or moisture in the dock connector at the bottom of the phone. Clean it with a dry toothbrush or air blast.

  • What does this message mean? : "The file name "DSC_0088.jpg" is offline or missing." ?

    What does this message mean? : "The file name "DSC_0088.jpg" is offline or missing."   I am in the process of importing photos from iPhoto (don't really know what I'm doing....) and when I look at one of the imported photos that message pops up.  I know what "DSC_0088.jpg" is.  I don't know what it means that the file is "missing".

    CASpyr,
    Thank you so much for your reply.  I have a couple of bigger issues that I am dealing with: too many photos on my laptop: 40,000! (Of course I have to throw away many of them, but that is time consuming). I have a MacBook Pro and have primarily used IPhoto. I have recently purchased 2 external drives and have transferred my photos to those, but I need a basic education about how photos are stored, copied, etc.  I have recently been told that iPhoto only shows and deals with jpegs, not RAW.  About 1/3 of my photos are RAW, so I purchased Lightroom, so I could do more with those RAW photos.  I have been told by my local Mac store that I need to delete most of my photos from iPhoto, because it's causing problems.  I am reluctant to do so until I am sure that all of the keywords, descriptions and editing I have done to these photos is not lost when deleted from iPhoto. I just watched a tutorial about importing to Lightroom and got out of it that I needed to copy photos from iPhoto to a file on my desktop and then copy to Lightroom.  I did that, it seemed to work.  Then (because of my storage/memory issues) I deleted the photos (just a few as an experiment) from that desktop file.  I'm guessing that is why Lightroom doesn't recognize the the photos.  It seems that (learned from another tutorial) that one uses "Add" , Lightroom is only connecting to the source of the photo, not  actually copying it to the program.  Sounds like I need to use the "Move" feature instead.  My ultimate goal is to store the photos on the 2 external drives and eliminate most of them from my lapop.  So my basic questions have to do with what data (metadata??) is copied from iPhoto to an external drive (RAW???) and what isn't copied. Basic understanding issues,obviously….  I hope this isn't too much to ask.  If you can recommend a book or resource that can explain those basic issues to me I'd appreciate it.  I just got back from a trip and I can't download my new photos until I manage the rest!
    Thanks,
    Nancy

  • What does this message mean baring in mind we don't know who 'Lareib' is?: ''Lareibs phone' is now using (my number) for iMessage'

    What does this message mean baring in mind we don't know who 'Lareib' is?: ''Lareibs phone' is now using (my number) for iMessage'

    How would we users in this forum also know who Lareib is?
    It means what is stated, that person is now using your number for imessage.

  • What does this message mean: "power pc applications are no longer supported"?

    What does this message mean: you can not start because power pc applications are no longer supported?

    Here is a post that I assembled for another who needed to continue to run his PowerPC applications in Lion/Mt. Lion:
    Unfortunately you got caught up in the minor miracle of Rosetta.  Originally licensed by Apple when it migrated from the PowerPC CPU platform that it had used from the mid-1990's until the Intel CPU platform in 2006, Rosetta allowed Mac users to continue to use their library of PPC software transparently in emulation.
    However, Apple's license to continue to use this technology expired with new releases of OS X commencing with Lion (and now Mountain Lion).  While educational efforts have been made over the last 6 years, the fact is that Rosetta was SO successful that many users were caught unaware UNTIL they upgraded to Lion or Mountain Lion.
    Workarounds:
    1. If your Mac will support it, restore OS X Snow Leopard;
    2.  If your Mac will support it, partition your hard drive or add an external hard drive and install Snow Leopard into it and use the "dual-boot" method to choose between your PowerPC software or Lion/Mt. Lion;
    3.  Upgrade your software to Intel compatible versions, or find alternative software that will open your data files;
    3.  Install Snow Leopard (with Rosetta) into Parallels:
                                  [click on image to enlarge]
    Full Snow Leopard installation instructions here:
    http://forums.macrumors.com/showthread.php?t=1365439
    NOTE: STEP ONE of the instructions must currently be completed on a Snow Leopard or Lion Mac and the resulting modified Snow Leopard.cdr install file can then be moved over to your Mountain Lion Mac for completion of the remaining steps.
    NOTE 2:  Computer games with complex, 3D or fast motion graphics make not work well or at all in virtualization.

  • What does this error2 mean and how do I fix it?

    What does this error mean and how do I fix it?  I am trying to reinstall CS4 on my Windows 8.1 machine. 
    Adobe Flash Player 10 ActiveX
    Error:
    Error 2.
    Here is the initial error: http://s29.postimg.org/wqy2ju8iv/Untitled.png
    Here is a screenshot when I click the "More Information" button: http://s27.postimg.org/bugb7rx7n/Untitled2.png
    And here is the screenshot when I click the "Get Support" button: http://s4.postimg.org/c2ynvhmvx/Untitled3.png
    I'm stumped.

    Hi there I've just installed CS4 Pro on Windows 7 64bit and got exactly the same result as you. Did you manage to find anything out, because the thing that bothered me was the limited functionality (what ever that is). Is it just a case of Windows 7 having a newer version of ActiveX already installed?

  • HT201514 What does this message mean and how do I correct it?

    What does this message mean?
    "The backup disk image “/Volumes/Nicholas' Time C-1/nicholas--MacBook Pro.sparsebundle” is already in use"
    How do i correct it?

    What does this message mean?
    It means that there are bugs in Mountain Lion.
    How do i correct it?
    Make sure that no other Macs are backing up at the current time
    Pull the power cord from the back of the Time Capsule
    Wait 10 seconds
    Plug the power cord back into the back of the Time Capsule
    This simple reset will fix this issue 98% of the time. If you happen to be in the unlucky 2% category, post back and we'll provide more information.

  • What does this error means "Could not create Entity EJB"

    This error occurs when i tried to run my entitybean example, so may i know what does this error means? How can i resolve it?
    I am connecting to an Oracle8 DB, but it seems tat i have problem connecting to it and retrieving record from the database. Can anyone help me how to establish a connection to my Oracle DB??
    Need help urgently. thanx.!

    have you tried simple jdbc connection?
    Driver drv = Class.forName("oracle.jdbc.driver.OracleDriver");
    Connection conn = DriverManager.getConnection(oracle:jdbc:thin:@myhost:1521:instance, "usrname", "password");
    If this works you're able to connect! so check that your oracel datasource is well specified in your deploiement descriptor and that your bean references this datasource.
    hope it helps

Maybe you are looking for