HT3131 Problem with closed Mac connected to power adapter

Dear support, as far as i understand when my mac is connected to display and closed, i can not unplug mac from power adapter - as the display will be off right away. Problem is - that i don't want my mac always be connected to power as it will harm the battery. Any Ideas?

Thanks for the answer. So that means there is no way that u can use external display in Clamshell mode without power adaptor. As far as I understood - I need to fully use my battery at least once a month, and then I can continue using power on all the time until next month, right?

Similar Messages

I need to download dell drivers to a jumpdrive connected to my iMac. Will this cause problems with my Mac?

I need to download dell drivers to a jumpdrive connected to my iMac. Will this cause problems with my Mac?

Thanks. These drivers are for the audio, etc. for a dell laptop I purchased used. ( Needed something cheap for a training video that would only run on Windows. Tried Emedia player but picture was too fuzzy.) Dell support said I should contact Apple support for instructions on how to get the drivers onto the jumpdrive. Any tips on doing that?

Hey Guys i have a problem with my mac since last month and it wont boot up it freezes in a grey apple logo and and spinning gear any body know how to fix this?

Hey Guys i have a problem with my mac since last month and it wont boot up it freezes in a grey apple logo and and spinning gear any body know how to fix this?

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into Recovery by holding down the key combination command-R at the startup chime, or from a local Time Machine backup volume (option key at startup.) Release the keys when you see a gray screen with a spinning dial. When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in the support article linked below, under “Instructions for backing up to an external hard disk via Disk Utility.”
How to back up and restore your files
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode by holding down the key combination command-T at the startup chime. Connect the two Macs with a FireWire or Thunderbolt cable. The internal drive of the machine running in target mode will mount as an external drive on the other machine. Copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
How to use and troubleshoot FireWire target disk mode
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Before reconnecting an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Step 3
Boot in safe mode.* The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
*Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Post for further instructions.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is damaged and the drive is probably malfunctioning. In that case, go to step 5.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 4
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 5
Launch Disk Utility in Recovery mode (see above for instructions.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it produces. Look for the line "Permissions repaired successfully" at the end of the output. Then reboot as usual.
Step 6
Boot into Recovery again. When the OS X Utilities screen appears, follow the prompts to reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.
Step 7
Repeat step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a backup.
Step 8
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested.

Problems with n97 apps connecting to network (Voda...

Problems with n97 apps connecting to network (Vodafone UK – 3G)
Recently a number of my apps which used to connect automatically to the internet (which ever was available – known wi-fi or 3g) have stopped doing this. They now only connect to one known wi-fi.
I’ve tried uninstalling and reinstalling each app, but this hasn’t solved the problem. I’ve checked for software updates and do not believe any have been applied or are available. All apps have been downloaded via Ovi on the phone. I still am able to access the internet by the web browser which was installed on the phone and via google maps (which also still manages GPS position, search, etc).
The apps which I notice causing a problem are:
Sainsbury’s/nectar
Tesco
Map my tracks
Snaptu
Opera Mini
Any one got any ideas???

I have the same problem since i updated my mac to 10.5.6.
Each time I have to do a diagnostic and retype the WEP password to have the internet connection.

Both xp and windows 7 have video problems with my VGA connection using TV

both xp and windows 7 have video problems with my VGA connection using TV as my monitor when it gets to starting up windows no matter what version it will not I have let my mac on all night and still says starting windows or the windows 7 logo and nothing else will happen also when I use a 3rd patty software like peraills or other it works like a charm how to fix it?

To map the drive on your computer click on Start - RUN - type "\\192.168.1.1" and click ok... When prompted for Username and Password type "admin" and click ok... Now you will be able to see the folder which you have shared on your router, right click on it and select "Map network drive" and click on finish.
Now it will map the drive on your computer and you should be able to transfer the file from your computer to the USB drive.

Got a message that there is a problem with my Mac OS X Kernal. my PowerBook has crashed 4 times in the last week and happened when backing up to Seagate plus ext. hard drive.

my PowerBook G4 has crashed 4 times in the last week. I got a message that there is a problem with the Mac OS Kernal. Does anyone know what this means?

Kernel panics are usually caused by a hardware problem – frequently RAM, a USB device or a Firewire device. What external devices do you have connected? When trying to troubleshoot problems, disconnect all external devices except your monitor, keyboard and mouse. Do you experience the same problems?
To eliminate RAM being the problem, Look at this link: Testing RAM @ http://guides.macrumors.com/Testing_RAM Then download & use Memtest & Ramber.
Do you have an Apple Hardware Test disc? Running the Apple Hardware Test in Loop Mode is an excellent troubleshooting step for finding intermittent hardware problems. It is especially useful when troubleshooting intermittent kernel panics. If Loop Mode is supported by the version of the Apple Hardware Test you are using, you run the Extended Test in Loop Mode by pressing Control-L before starting the test. Looping On should appear in the right window. Then click the Extended Test button.The test will run continuously until a problem is found. If a problem is found, the test will cease to loop, indicating the problem it found. If the test fails, be sure to write down the exact message associated with the failure.In some cases, RAM problems did not show up until nearly 40 loops, so give it a good run.
May be a solution on one of these links.
http://support.apple.com/kb/TS3742 What's a "kernel panic"? (Mac OS X)
http://www.macmaps.com/kernelpanic.html Mac OS X Kernel Panic FAQ
http://www.index-site.com/kernelpanic.html Mac OS X Kernel Panic FAQ
http://www.thexlab.com/faqs/kernelpanics.html Resolving Kernel Panics
http://www.macfixit.com/article.php?story=20060911080447777 Avoiding and eliminating Kernel panics
http://macosg.com/group/viewtopic.php?t=800 12-Step Program to Isolate Freezes and/or Kernel Panics
 Cheers, Tom

Need Help Troubleshooting Problem with Shared Internet Connection

The setup:
DSL Modem/Router
Mac Running 10.4.4 connected to router directly, via ethernet cable
Mac Running 10.2.8 connected to router wirelessly, via ethernet bridge
The Mac connected by wire has no problems.
The Mac connected by radio works perfectly with web browsers and with Apple software update, but it can't connect to the AIM server and it can't connect to the GMail POP server. It can connect to those servers via dial-up however.
Any ideas on how to fix this?

Could you list the make and model numbers of your dsl modem and your wireless bridge please?

I'm having problems with my internet connection after installing OS X Lion. Is this a known problem or just a local problem?

I'm having problems with my internet connection after installing OS X Lion. Is this a known problem or just a local problem?
After +/- 10 to 15min my connection is gone.
Does anyone have a sollution?

Lots of people are having the same problem, you're not the only one, belieeeeve me.
Just Googling the problem gets you tons of people complaining about the same thing, SOMETHING is up with Lion what wasn't happening with Snow Leopard. i just bought a new Imac and it CAME with Lion, so i started experiencing this internet dropout immediately.
It's been going on for the most of a year it looks like (at least by the dates from the threads i've been reading)
So your best bet is to fiddle with the System Preferences and read what other people have used to make theirs work. i'm doing that myself right now. I already posted a similar thread last night trying to figure out why my connection kept on dropping, i got a reply which linked me to a site. i followed the instructions there, so far so good, but i'm just being cautiously optimistic.
i'm gonna call Apple today and see if they've found anything, though seeing as this is a problem right out of the box there may not be an immediate solution. Good luck hunting for a solution :3
Site:
http://osxdaily.com/2011/11/06/lion-wi-fi-problems-solution-mac/?utm_source=feed burner&utm_medium=feed&utm_campaign=Feed%3A+osxdaily+%28OS+X+Daily%29&utm_conten t=FaceBook

I have an iPad MD371Y. Since when I installed the iOS 6 I'm fading problem with the WiFi connection. The line fall everytime the device go on automatic stand by (if i do not touch it for 5 min). Can somebody be of Help?

I have an iPad MD371Y. Since when I installed the iOS 6 I'm fading problem with the WiFi connection. The line fall everytime the device go on automatic stand by (if i do not touch it for 5 min). Can somebody be of Help?

iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting
http://www.apple.com/support/ipad/wifi/
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Problem with my internet connection with Mail and others

Hi
I seem to have a problem with my internet connection that is through Ethernet. I have just downloaded the update to iLife 9 and the down load speed went from zero to 1.1BB/s but most of the time it downloads at speeds around 8KB/s also Mail some times returns mail sent but there seems to be no problem sending out only that things go faster out than in. My internet speed from my ISP is 500KB/s so as you can see I was at first happy that I was getting speeds in of 1.1MB/s. I have done a diagnostic test through network also fully run Norton and finally run utilities with no problems showing. My ISP is willing to come and have a look at my internet but I some how think it's my computer, any ideas?
Thanks

The first thing I would do is completely disable Norton AntiVirus; there are no viruses for Mac OS X, so it can't protect you from something that doesn't exist. It can, however, severely slow down your system. Do that and then restart Mail and see if the problem continues.
You should also try creating a new User account and test Mail there to see if you experience the same problem; if so, then the issue is systemwide. If not, it's something specific to your regular user account.
As for your download speed, it's not 1.1MB/s; it's 1.1Mb/s. Upload speed is slower than download speed for both Cable and DSL service. I doubt the problem is your modem/router, but you should try shutting down your Mac and the modem for a few minutes. If your modem/router has a reset button, use it, then restart it and your Mac and see if the problem continues.

My new macbook air and new thunderbolt monitor will not work together. the keyboard will not engage and the monitor screen keeps going black. is it a problem with the monitor, connection, laptop?

my new macbook air and new thunderbolt monitor will not work together. the keyboard will not engage and the monitor screen keeps going black. is it a problem with the monitor, connection, laptop?

A new Mac comes with 90 days of free tech support from AppleCare.
AppleCare: 1-800-275-2273
Call AppleCare. They will help you.
Best.

Time Machine - Problem with establishing a connection to the server

Using LionMac OS X Version 10.7 and when attempting to setup Time Machine to make backupto my ReadyNas Duo, the setup fails and I receive the following message(translated from Danish):
“There wasa problem with establishing a connection to the server ”SERVERNAME”.
The versionof the server that you attempt to establish connection to, is not supported.Contact the system administrator to solve the problem.”
Any ideasfor a solution?

Please follow these instructions:
Lion: Connecting to legacy (pre-Lion) AFP services - and Mac OS X (server):
https://discussions.apple.com/thread/3258472

TS1398 I have problems with my wifi connection after update the ios6 any advice

I have problems with my wifi connection after update the ios6 any advice

iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting
http://www.apple.com/support/ipad/wifi/
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Since i upgrade to Yosemite i have problems with my Mac.

Since i upgrade to Yosemite i have problems with my Mac. Its brand new and i miss Maverics.
Yosemite is slow. The screen goes black and restart suddenly. Reports errors all the time.
How can i solve the problem and goes back to Maverics?
Please help...

Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
    b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
4. Reinstall Yosemite: Reboot from the Recovery HD. Select Reinstall OS X from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.
5. Reinstall Yosemite from Scratch:
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
How to Clean Install OS X Yosemite
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.

Hello, I have a problem with my mac book pro after running the battery dead on a game. The display has shrunk leaving two black margins on either side. What to do ?

Hello, I have a problem with my mac book pro after running the battery dead on a game. The display has shrunk leaving two black margins on either side. What to do ?

Go to System Preferences>Displays and set the resolution to "Best for this computer" (or something to that effect).
Clinton

HT3131 Problem with closed Mac connected to power adapter

Similar Messages

Maybe you are looking for