HT3131 This doesn't seem to work on Apple Thunderbolt Display and 2011 Macbook Pro.

Any input would be appreciated

I've a 15" late 2011 MacBook Pro and an Apple Thunderbolt Display and I run in clamshell mode at least 90% of the time... what sort of problems are you having?
Clinton

Similar Messages

  • I used to be able to download files from the Harddrive of my Sony Handycam, but now it won't let me import them while going through "log and transfer."  I have tried to update my settings, but this doesn't seem to work.  Any help would be much appreciated

    I used to be able to download files from the Harddrive of my Sony Handycam, but now it won't let me import them while going through "log and transfer."  I have tried to update my settings, but this doesn't seem to work.  Any help would be much appreciated

    Hard Drive:  The Hard Drive is on my camera (Sony Handycam)
    Just needed some info on what is going on with your particular system.
    Knowing the exact camera model will also assist us.
    If this camera is standard AVCHD you should be able to connect with USB to Mac with FCE open and use Log and Transfer without all the fiddling around converting etc.
    What FCE does during ingest is convert files to AIC. (Apple Intermediate Codec)
    FCE cannot read the individual files in the BDMV folder, that's why all the converting is required when you use that method.
    BTW: regards formatting drives/cards/memory on cameras; it is wise to use the actual device to format rather than a computer. This is a prime cause of read/write goof ups with solid state media. This applies to still or video cameras.
    Keeping the COMPLETE card/memory structure in tact is vital for successful transfers.
    Try here for some trouble shooting tips:
    https://discussions.apple.com/message/12682263#12682263
    Al

  • Is there a way of using IE7 with Mountain Lion? There used to be this facility using Safari "Develop" with Lion, but this doesn't seem to work with ML

    Is there a way of using IE7 with Mountain Lion? There used to be this facility using Safari "Develop" with Lion, but this doesn't seem to work with ML

    Thank you for this, and to Caleb.
    I've tried using Caleb's approach (which is the same as I used with Lion), but the programme doesn't respond now that I have installed Mountain Lion.
    My problem is that I do not want to use IE7 but that a programme I need regular access to will only allow IE7 and I've been told by the developers that it is too expensive to upgrade this programme to allow it to be used by other browsers.
    So, my puzzle remains the same. I could access IE7 and use the programme using Caleb's solution with Lion. I can't do the same with Mountain Lion. I do (I think!) understand your point about the programme requiring IE7 specifically, but if it worked on Lion, why isn't it working on Mountain Lion? Or was I just lucky before?
    I'll try mende1's approach, though I doubt I'm technical enough to virtualise anything!
    Thanks again. Any further thoughts welcome.

  • 27" iMac (refurb, June 2011) not working as an external display for my MacBook Pro.

    I just got a 27" iMac (refurb, June 2011) and it's not working as an external display for my MacBook Pro (not Thunderbolt).  Any idea why?  Command+F2 does nothing.  I am connecting via Belkin Minidisplay Port-to-Minidisplay Port adapter.
    Any help is appreciated...thanks!

    Currently the ThunderBolt iMacs can only be used as an external display by other ThunderBolt Macs.
    http://docs.info.apple.com/article.html?path=Thunderbolt/10.6/en/30822.html
    Apple is very clear about that.
    2009 and 2010 27" iMac with a Mini DisplayPort can be used by other Macs with a MDP-to-MDP cable.
    Stefan

  • Why doesn't my EarPods with 3.5 mm work with my iPod touch and my MacBook Pro?

    I have an iPod touch 4g and a Macbook Pro that i bought on October of 2013. I have an EarPod 3.5mm but it won't work witht these items. Should it work? Should it not work? You can hear sounds but they are unclear or you cannot hear them at all if you listen to them.

    If you have another device that uses headphones try it with that. If they don't work get them replaced or buy some good headphones.
    You are welcome.

  • I seem to have 2 Apple IDs, one on my MacBook Pro and another on my devices.  If I switch from MobileMe to iCloud on my Mac (under the apple logo) will my devices work and sync in iCloud.  I have no idea how I go 2 IDs

    Can I get rid of one  ID?  How do I do that?

    one on my MacBook Pro
    That's not an Apple ID. That is your admin account which you can view in System Preferencs > Accounts or Users & Groups.
    If I switch from MobileMe to iCloud on my Mac (under the apple logo) will my devices work and sync in iCloud.  I have no idea how I go 2 IDs
    Just use your current Apple ID when you setup your iCloud account that you use for your devices.
    Apple - iCloud - Learn how to set up iCloud on all your devices.

  • HT5037 This doesn't seem to work

    I've downloaded and run the installer but still can't launch iPhoto, continue to get the same prompt about the "Library Upgrader".  Antone else have this issue and managed to solve it?

    Jumped the gun, read some other posts and see I have to run the installer from the utilities folder.  This wasn't mentioned as being part of the installation process, normally after install things just work, small wonder many people were having problems.

  • HT5556 This doesn't seem to work in Australia. Anyone know how to make it work?

    Anyone know how to get the camera redemption feature to work in Australia?

    Anyone know how to get the camera redemption feature to work in Australia?

  • HT4882 This no longer seems to work since Lion was installed and still not with Mountain Lion.

    It seems this feature has stopped working only since Lion (now Mountain Lion)was installed. I wil try an old copy of an earlier OS as an external boot to check but this appears to be anOS upgrade problem.

    The Swedish site you've linked is discussing .xmodmap, which is a hidden (hidden because of that leading dot) configuration file in your login home directory that's used to customize settings for the keyboard mapping within X11.
    I'd expect the XQuartz tool to read ~/.xmodmap in your login directory as part of its initialization sequence.
    The xmodmap tool (no leading dot, and not a hidden file) is an application that's used to process the configuration file.
    When you invoke xmodmap (the tool), you either need to specify the full path /usr/X11/bin/xmodmap for it to be found and invoked, or you need to have the /usr/X11/bin/ directory added to your PATH.  Your PATH is the list of directories where OS X looks for the tools you're invoking. 
    If the xmodmap tool is not working, are there any diagnostics?  Or is XQuartz not honoring the request?  (If so, see if it will honor the setting made via the .xmodmap configuration file.)
    And if you don't get an answer here, you might try the (pretty quiet) Apple x11-users mailing list.

  • Wi-fi not working with Apple Cinema Display and Bluetooth-peripheral

    Hello everyone.
    I have a MacBook Pro (Retina, 13-inch, Late 2013), with OS X Yosemite 10.10.1. My problem is that when I use my macbook in closed-clamshell mode, the wi-fi connection becomes very slow and it regularly drops.
    My external display is a Apple Cinema Display, 22-inch, model M8149. My mouse is the Apple Magic Mouse and my keyboard is the Apple Wireless Keyboard.
    Thanks in advance for helping me.

    Good day Brett,
    I followed the suggested steps and for Wireless Diagnostics is all ok, but my connectivity problems are not solved.
    I have made two report of the analysis. The first in "normal" mode is downloadable here. The second in closed-clamshell mode is downloadable here.
    Could you tell me what is going on?
    Thank you a lot

  • Port forwarding to Apex doesn't seem to work

    Hi,
    We have an Oracle 11.1.0.7 database running on Linux in which I've upgraded Apex to 3.2
    I'm using the embedded gateway/listener (no Apache).
    Now I want to make this Apex instance available over the Internet so that a developer can work remotely. However this doesn't seem to work.
    Check the listener log file I see the following lines:
    14-APR-2009 22:38:56 * http * (ADDRESS=(PROTOCOL=tcp)(HOST=10.1.4.3)(PORT=2529)) * handoff * http * 0
    14-APR-2009 22:38:57 * service_update * D11 * 0
    14-APR-2009 22:38:59 * http * (ADDRESS=(PROTOCOL=tcp)(HOST=10.1.4.3)(PORT=2530)) * handoff * http * 0
    14-APR-2009 22:39:00 * service_update * D11 * 0
    14-APR-2009 22:39:02 * http * (ADDRESS=(PROTOCOL=tcp)(HOST=10.1.4.3)(PORT=2531)) * handoff * http * 0
    Tue Apr 14 22:39:31 2009
    14-APR-2009 22:39:31 * http * (ADDRESS=(PROTOCOL=tcp)(HOST=10.1.4.3)(PORT=2532)) * handoff * http * 0
    14-APR-2009 22:39:32 * http * (ADDRESS=(PROTOCOL=tcp)(HOST=10.1.4.3)(PORT=2533)) * handoff * http * 0
    14-APR-2009 22:39:32 * http * (ADDRESS=(PROTOCOL=tcp)(HOST=10.1.4.3)(PORT=2534)) * handoff * http * 0
    14-APR-2009 22:39:33 * service_update * D11 * 0
    Tue Apr 14 22:48:00 2009
    14-APR-2009 22:48:00 * http * (ADDRESS=(PROTOCOL=tcp)(HOST=10.1.1.51)(PORT=2715)) * handoff * http * 0
    14-APR-2009 22:48:00 * http * (ADDRESS=(PROTOCOL=tcp)(HOST=10.1.1.51)(PORT=2717)) * handoff * http * 0
    14-APR-2009 22:48:00 * http * (ADDRESS=(PROTOCOL=tcp)(HOST=10.1.1.51)(PORT=2719)) * handoff * http * 0
    Can someone explain this log file to me?
    Meanwhile, I'm off to try Apache.
    Cheers,
    Colin

    Hi Rob,
    No, this is from internal LAN connections. I haven't been able to detect anything in the log files when attempting to connect from the internet.
    I'll increase the logging level & post some findings on this later (I'm at a client site right now).
    Cheers,
    Colin

  • I'm using iphoto9.1.3 but now it doesn't seem to work, whenever I try to open it, it just shows loading, but never loads. Can anybody help me with this ?

    I'm using iphoto9.1.3 but now it doesn't seem to work, whenever I try to open it, it just shows loading, but never loads. Can anybody help me with this ?    

    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
    Regards
    TD

  • TS5183 My Iphone has a problem with the microphone it doesn't seem to work! so there for i can't use Siri anymore..:-( this has been playing up for some time now.

    My Iphone has a problem with the microphone it doesn't seem to work! so there for i can't use Siri anymore.. this has been playing up for some time now. But as my wife & I had a baby 7 Months ago I have not found the time to pop in to the apple store until today (8/12/13) and they told me that they couldn't help as it's out of it's warranty by 57 days
    Can antone help me? is there something i can do, apart from buying a new iphone!

    Have you got Siri turned on in settings/general/restrictions?

  • After copying a movie to the harddisk of my MacBook I wanted to also copy it to my iPad, but for this you first have to copy it to the library in iTunes, but this doesn't seem to be working. So how can I get this movie to the library ? And to the iPad ?

    After copying a movie to the harddisk of my MacBook I wanted to also copy it to my iPad, but for this you first have to copy it to the library in iTunes, but this doesn't seem to be working. So how can I get this movie to the library ? And to the iPad ?

    How is it not working?  And how are you doing it?  Drag the movie onto the iTunes icon on the Dock...  what happens?

  • Can negative B&W image be converted to positive, done this on elements previously by inverting but doesn't seem to work same way in lightroom ?

    Can negative B&W image be converted to positive, done this on elements previously by inverting but doesn't seem to work same way in lightroom ?

    You should be able to invert in Lightroom. But choose the point curve rather than the region curve. If the negative is film you might get better results from scanning.

Maybe you are looking for

  • How to print vertical lines in smartform?

    Hello friends, Is it possible to draw vertical (continuous) lines in the main-area in a smartform? The line should start from the header and end when it reaches the footer. the line should look like it divides the main window.

  • Outputting an int variable in an applet?

    Hey all i will keep this short, i am modifying an applet for a university project and am trying to output an integer variable to screen, i tried using g.drawString but i apparently can only use it to output "text in the double quotes" and if i try pu

  • Flatten Annotations in PDF File

    Hello, Is there a way to flatten the annotations in a pdf file to guarantee they will print with the document when the user receives it. thanks barbara

  • Image from database loaded at run time.

    Post Author: Adam20002 CA Forum: .NET I am using Crystal Reports 11. I have a report with an image in it that i want to change dynamically from my ASP.Net page. I am doing this at the moment by passing an image path in as a parameter and setting the

  • How to get secondary tile background color on WP 8.1?

    Currently, all secondary tiles are returning background color #7FFFFFFF regardless of color