HT3142 Display size is too large on yahoo mail

My display size is too large on yahoo mail page only (page I need and use most). How do I correct it, please?
Changing the display selections from system preferences is not working.

There may be a control within the application you are running Yahoo.
Which browser are you using online to access Yahoo?
In the View menu bar of the open application, there may be a choice
to change the size of the display content in the window itself, check.
Some of these use a keyboard command, should the setting go to
Full Screen, you'd need to know the default or escape combination
of keys to restore the application's window to a standard size. This
kind of inside-application setting is not reflected System Wide.
Since I don't know the browser, (as I have five, each is different)
I can't recommend a keyboard combination to re-size the open
application's view or window setting. They can be non-standard.
But that likely is where you'd have to change it back to normal.
PS: Snow Leopard is Mac OS X 10.6.8.
(Tiger is OS X 10.4.x)
Good luck!

Similar Messages

How do I split a pdf file when the file size is too large?

How do I split a pdf file when the file size is too large? Thanks!

With Adobe Acrobat. It can also optimize your document to make the size smaller.

"File size is too large"

When I imported the only 4 files in a particular folder (scans of photos) into the Organiser, the message "File size is too large" came up for two of them instead of preview images, although do appear to have been added to the Catalog as their MB size, pixel dimensions and creation date show in the Properies General tab.
I take it this must relate to pixel count and not the file size per se as the two tifs (13.2 and 13.3 MB but 1792 x 2508 and 2518 x 1798 pixels) are fine, while the two JPGs (12.9 and 30.8 MB and 9616 x 6480 and 7048 x 10376) are the ones without preview images?
I wasn't aware of this as a problem, so can anybody tell me please, have I just set too low a limit somewhere or is there a real restriction?
And is this new to PSE6 or something that's been around for a while?
Thanks, Peter

I have a 212mb psd file (a panorama). I have Elements 6.0 and 4 meg RAM, Vista.
I went through the regedit process as outlined in Adobe Technote kb402760 and upped it to 1,000,000,000. I would think that would have given enough headroom for my file size. But it didn't. I still have the generic "file size too large" on my thumbnails.
I did note that the tech note had a different location for the Software/Adobe/Elements 6.0/Organizer (HKEY_LOCAL_MACHINE\ ) from the location in my file structure. In fact, this string was listed in at least three places OTHER THAN the one indicated in the Technote. How likely is it that adding "MaxImageSize" to the Elements 6.0 register locations other than specifically indicated is the reason why the file size capacity was not increased. Why doesn't Elements show up in the location indicated by the Tech Note?
NOTE FOR ADOBE: Why isn't this a more easily accessible option in the user interface? If I have a large file that slows things down a bit on my thumbnails, that could be my choice. This artificial constraint built into the regedits that no one goes to is too much like parental controls for 5 year olds.

The window displaying bookmarks is too large (suddenly happened with the new version). I can't figure out how to make the display smaller. Zooming out does not work on the bookmark menu display.

I have version 4, just downloaded, and a Mac w. OS 10.6. 7.
The bookmarks display (when I pull down "bookmarks") is much too wide. I can't figure out how to reduce the display size. The window is not persistent so I can't even get you a screen shot.
Thanks, Sara

It seems there was a change in Firefox 4 where the width of the drop-down is now determined by the length the longest bookmark name in the folder being displayed. Previous versions of Firefox would shorten a long name like that and add an ellipsis to signify the name was truncated.
Sorry, I don't know how to change that other than to advise you to edit the name of that long bookmark name and make it less verbose. Just scroll down the list of bookmarks in that wide folder until you see the culprit, then right-click that bookmark and open Properties & edit the Name line at the top of that dialog.

Font changing size when i go to yahoo mail on my new netbook sometimes its ok other times it appears microscopic i have to close firefox then reopen and sometimes this works other times it does not work Why ?

this does not happen on any other site i visit only on yahoo mail.yahoo,s answer to the same question is we dont know reason maybe its firefox.

I have had that happen with Comcast web mail, too. You can't hold the Ctrl key and then use the scroll wheel to do certain functions in the web mail software. That function will work in the web mail software, but you will also change the Zoom factor of the page. You have to remember to '''''reset''''' the Zoom factor immediately, Firefox will remember the Zoom factor and use that until you reset it to default.

Ics50deletelog.db size getting too large

I 've been watching this file (ics50deletelog.db) on our Sun calendar. It is currently over 1,200,000 KB - way too big for my taste. What is this file storing? Is there any way to reduce the size?
Please help

navvith wrote:
I can see that entries are being removed, but at a painfully slow pace. Is there any way to completely clear this log database? If your users are making use of the Outlook Connector I wouldn't recommend completely clearing the database.
I have a clean install of calendar server on other system with an empty delete log database. Could I simply replace the oversized one with this and restart the calendar server?If the objective is to shrink the size of the database, you could first try dumping/reloading the database e.g.
1. Stop the calendar instance
cd /opt/SUNWics5/cal/sbin
./stop-cal
2. Verify the current database, keep a record of the output for comparison
./csdb check
3. Dump the database to a txt file.
cd /opt/SUNWics5/cal/tools/unsupported/bin
export DB_HOME=/var/opt/SUNWics5/csdb/
./db_checkpoint -1
./db_archive
./db_dump -r /var/opt/SUNWics5/csdb/ics50deletelog.db > /var/tmp/ics50deletelog.db.txt
4. Reload the database to a temporary db file.
./cs_dbload /var/tmp/ics50deletelog.db < /var/tmp/ics50deletelog.db.txt
5. Keep a backup of the the old deletelog database and move the new db into place
cp -p /var/opt/SUNWics5/csdb/ics50deletelog.db /var/tmp/ics50deletelog.db.orig
cp /var/tmp/ics50deletelog.db /var/opt/SUNWics5/csdb/
6. Verify the database, compare the output with the previous ./csdb check to ensure they are the same
./csdb check
7. Restart the calendar serverI would recommend running through these steps in your test-environment first to ensure you are comfortable with this prior to trying them in production.
Regards,
Shane.

Warning: Cache size set too large?

I've recently installed a SSD to work as a dedicated cache drive, and I've directed the 3 cache settings in AE (CS6) to it.
The drive is 240GB, but I can't put the cache size over 150GB without getting a warning that it's set too high. Is this true? Am I wasting almost 100GB?

Use your drive for something else. 150GB is a huge huge cache. The CS6 disk cache is glitchy anyway. I have mine turned off most of the time.

App size not (too large within window) correct can...

When the app loads for me the contents inside are bigger than the window itself. This means I can't see the IM bit at the bottom of conversations and options page and things like that.
Anyone know how to reset the setting on the app i have tried uninstalling and re-installing. Basically as soon as it loads you can see the central loading icon jump to what it must think is center of my display but its not resulting in large portions of the app not being visible.
Thanks!

Can you click on the 'Restore Window' button and manually resize the LR window.
If that doesn't work try resetting your LR Preference file:
http://members.lightroomqueen.com/index.php/Knowledgebase/Article/View/1148/198/how-do-i-d elete-the-lightroom-preferences-file

Form Size becoming Too large

Hello,
I have a very strange problem.
I designed a fillable form using Designer7.0. I reader enabled the form using Adobe Reader Extensions Server 7.0, so that users use their Adobe reader(7.0.5) to fill in the form. The empty PDF form is around 700KB in size.
Now, When the user filled the form manually typing the data(25KB data) in the form and saved it. It saved as 60 MB file. I cannot justify this increase of the size anyways to my authorities. I am looking forward to hearing from you so that I can tell then what can be the possible reasons for this.
Also One more observation. When I imported the 25KB XML file into the empty form and save it, it is just 1.1MB in size.
Please help me understand whats going behind the scenes?
Thank you for your attention
Sam

Hi,
I had a similar problem with a pdf created in LCD. If you ever open a pdf form in LCD and see a message about it being Reader Enabled and that you have to overwrite it, you likely have the same problem I had... My file went from less than 300 kb to more than 16 Mb... and back to around 300 kb with the following solution...
For a reason not very clear, once a file has been applied the Reader Enabled feature inside Acrobat, if we open it again inside LCD it kind of keeps a memory and every time we save it adds to it.
What I had to do is open the pdf file in Acrobat, reapply the Reader Enabled feature (LCD asked me to remove it when I opened it inside of it) and then do a File --> Save a copy. It removes the right and all the “memory” of the file and brings it back to a small file (about 300kb in my case, instead of the more than 15Mo it was then)!
So, now, every time that I need to edit a file, I first do a Save a copy in Acrobat (only available if the pdf has been Reader Enabled) and open it in LCD. No more problems…

Tried to send too large a message - mail now not working

Hi,
We have a problem. We tried to send a message containing a number of high res. pictures from our .mac account. Clearly this was far too big to send. The message has not appeared in the sent box but is not shown in an outbox. We now keep getting an error message:
"Mail has undone actions on some messages so that you can redo the actions while online. Mail has saved other messages in mailbox “Drafts (Mac Account)” in “On My Mac” so that you can complete the actions while online.
Additional information: The connection to the server “mail.mac.com” on port 993 timed out."
Every time we get this message a copy of the email we tried to send appears in a drafts folder in 'on my mac'
We are not receiving emails onto the computer now although I have checked on my mobile me account and they are coming through fine to that - they are just not being downloaded to our computer.
How do I stop mail trying to send this email and where can i find it to do it. I considered deleting the account and re setting it up but we have loads of emails in our inbox and sent box that we don't want to lose.
Can anyone help?
Thank you

Greetings,
Don't even think about deleting accounts; it won't solve the problem and it will create a bigger problem for you.
If the mail is in your Drafts folder as the error message said, first you should look in Home/Library/Mail/<the name of your mobileme account>/Drafts.mbox/Messages and delete the message from there if you see it. Also check your online MobileMe account to see if there's a copy there and delete it, too.
Then try restarting Mail to see if your mail will start downloading to your Mac again.

HT1338 How do I change my display settings to normal size.....everything is far too large ? Icons, font size, etc....

Everything displayed is farr too large....I have somehow changed my settings.....e-mails, icons, etc....everything is aplified in size....any ideas ?

Try System Preferences > Displays
Try a different resolution.

Font size too large on itunes summary page . Half the words are cut off.

How to change font size on the itunes summary page? Currently font size is too large resulting in sentences being cut off.

Did you increase the minimum font size?
If you increased the minimum font size then try a lower setting (default is ''none'') as a too high value can cause issues like you described.
Tools > Options > Content : Fonts & Colors: Advanced > Minimum Font Size
Tools > Options > Content : Fonts & Colors: Advanced > "Allow pages to choose their own fonts, instead of my selections above"

Help! VerifyError: stack size too large??

I seem to have a class file with which the class file verifier has a complaint:
D:\test\out>java Probe
Exception in thread "main" java.lang.VerifyError: (class: Probe, method: main signature: ([Ljava/lang/String;)V) Stack size too large
Can anybody point me towards documentation about what the algorithm is or should be to calculate the correct stack size. Or documentation on the message?
I assume the meaning of the message is that the operand stack size is larger than used by the code for the static method main. However, I haven't a clue as to the algorithm I should verify the size against.
Thanks for any help suggestions

Thanks for the suggestion. I am running a modified Class file and have read the jvm spec. I was hoping somebody would have a suggestion as to what the error message actually means...
For example does this mean that the declared size of the operand stack is greater than that required by the code? Or perhaps that the declared size is too large for the code?
The actual method is quite small (on the order of 500 instructions).
I know that the jvm has a requirment that the operand stack have the same size along all control paths (loops, gotos, etc) to a specific instruction. I don't know what error the verifyer would give if this was the problem.
Is there any documentation anywhere the verifier's error messages?
Thanks for any help you can give.

OS10.3.1 a disaster! Among other things, the dsplay is too large for screen

I do not like OS 10.3 ! After my Z10 was updated to 10.3.1.1779 about a month ago, I access it because the password entry keyboard displayed for about 1/10 sec leaving a black screen.
After a device reset the device the keyboard remained visible but did not respond to touches (actually it did respond randomly to some). Finally another reset gave me a usable keyboard.
But the device always opens with an icon display about 20% too large for my screen and requires several shrink attempts before the proper size displays. Each attempt simply bounces back to the oversize state.
Unfortunately, this also happens with every app (including "Settings") opened. Yesterday, I couldn't return to the main of Settings because the sub-page wouldn't shrink to expose the "<' button - a close and re-open was the only way to get back to the main page.
Other points I hate about the OS: I've noticed my active wallpaper (not custom but from 10.2) is not listed in the the new 10.3 wallpaper list and since I don't know where its stored I can't try one of the newer ones without giving up on the present wallpaper.
The date displayed on the home screen is too faint to be read with my wallpaper. I know there are some people who think black on black is cool; they obviously have great eyesight. The new 10.3 compass is now totally useless and the new clock is not much better but is at least still usable by a change to a digital display.
I recently tried to check the time on a sunny afternoon and gave up because I couldn't make out the white lines on the black background. I find the stupidity of black on black unfathomable and in over 40 years of software development I have never seen something as wasteful of engineering time as products with poor user interfaces (i.e. black on black). Why can't these apps offer the user the ability to change the colour?
The calculator has also regressed. Again all black (cool!), though that's not the issue here. For the longest time I thought it no longer supported scientific operations until I accidentally got a lucky swipe to bring it into view.
However, the requirement of a half-dozen swipe attempts for each display change reduces this app to a space waster or only to be only useful for simple operations and units conversion. I'm going to try a reload of the OS but unfortunately that won't improve the apps.
Is this standard procedure that Blackberry destroys all (blackberry) apps of the previous version with new ones at each update and offers no way to get back or protect against such changes?

Hi All,
I have already checked below configuration T-Code Value :
T-Code : OBA0 :
Tolerance for Groups of G/L Accounts in Local Curre :
Debit posting : 0 TWD, Percentage 0 %
Credit posting : 0 TWD, Percentage 0 %
T-Code : OBA4 :
Upper limits for posting procedures :
Amount per document : 9,999,999,999,999
Amount per open item account item : 999,999,999,999
cash discount per line item : 1%
Permitted payment differences :
Revenue : Amount 100, Percent 1%, Cash discnt adj. to : 100
Expense : Amount 100, Percent 1%, Cash discnt adj. to : 100
I don't understand when AR open item amount is USD 100.3, and incoming payment 101.12, The system can auto clearing by current configuration, but change the AR open item amount to USD 0.3 and change incoming payment amount to 1.12, The system alert error message "The difference is too large for clearing". The same system configuration and the same "Not assigned" value in choosing open item screen, but produce different results!
How should i change the configuration?
Best regards,
Eric
Edited by: Eric Yang on Sep 12, 2008 2:12 AM

Texts are too large on the screen (which appers wi...

the font size is too large in the screen i get for texting (the fonts appear on the screen when i open the key board)
all the other font sizes can be changed but this font size couldnt change..
i have used 5800 and it had a nice font size there..
please help..

mgwaltney,
The most likely reason for this would be that the display resolution has been changed. You should first make sure that it is set correctly (at the maximum, "native" resolution if an LCD) in System Preferences>Displays.
If the resolution has not been changed or set below the native resolution, then there's not much you can do beyond re-sizing windows as they appear. It shouldn't take too long to get everything back to normal.
Scott

HT3142 Display size is too large on yahoo mail

Similar Messages

Maybe you are looking for