HT3153 Can the early 2006 MAC mini support a DVI to hdmi adapter for TV monitor support?

Can the early 2006 MAC Mini support a DVI to HDMI adapter for a TV Monitor?

Hi, I can't see why not...
Supports digital resolutions up to 1920x1200 and analog resolutions as high as 1920x1080.
http://www.everymac.com/systems/apple/mac_mini/specs/mac_mini_cd_1.66.html

Similar Messages

  • HT3382 I have an early 2006 Mac Mini and need to connect it to a VGA display.  What connector should I use?

    I have an early 2006 intel core solo Mac Mini (locted in India) and need to connect it to a VGA display.  I have looked at the support articles but can't figure out what adapter to use.

    There was a DVI to VGA adapter included with the early 2006 mini.  The one that I have looks like this
    You should be able to buy one, although it's not currently listed in the US Apple online store.

  • How can I control a mac mini connected to a benchmark dac 2 for the purpose of listening to 24/192 audio files?

    How can I control a mac mini connected by USB to a Benchmark DAC 2 for the purpose of listening to 24/192 music downloads?

    Hello,
    About the dac 1, but may apply to the dac 2 as well in some ways...
    Here are more details:
    1) The current version of iTunes (7.5) for OSX is very broken. Some older versions work properly, but 7.5 introduces truncation and DSP artifacts that can measure as high as –80dBFS. These levels are easily audible. There is no system configuration that will permit transparent playback from 44.1kHz sources with iTunes 7.5. Curiously, the only format that works properly in 7.5 is 24-bit/96kHz. This iTunes problem has nothing to do with USB communications, as the results are the same when using the built-in optical port on our PowerBooks. As a workaround, we suggest using the free VLC for Mac player. VLC works perfectly with all formats (provided OSX is set to match the sample rate of the files being played). We highly recommend the VLC player for OSX users, and strongly advise against using iTunes. We will attempt to identify which versions of iTunes work and which ones don't. But beware, iTunes updates itself without user intervention. One of our test computers "upgraded" itself to the dysfunctional iTunes 7.5.
    2) OSX still does not have the ability to follow sample-rate changes. We consider this a nuisance for most users and a show-stopper for users who want to play a mixed list of 44.1kHz and 96kHz material. An OSX sample-rate mismatch will invoke the very-poor-quality sample-rate conversion that is built into OSX. The iTunes 7.5 bug seems to be locking on this sample-rate conversion at all sample rates other than 96kHz. Until this is fixed, OSX is not the operating system of choice for audio playback.
    http://www.stereophile.com/content/benchmark-dac1-usb-da-processor-headphone-amp lifier-manufacturer-comment

  • Can the new Intel Mac Mini really run Win XP?

    I have had my Mac Mini for almost two years now and i love it, i love it because i switched from Windows, but now i kind of miss Windows so i was going to buy a Windows PC but then i read somewhere that the new 1.66GHz Intel Core Duo Mac Mini can run Windows XP, so i have few questions if that is true...
    1. How well will Win XP run on the new 1.66 GHz Mini with 1 Gig of RAM?
    2. Which version of XP do i need to buy and where is the best place to buy it?
    3. I know this might be a dumb question since Windows Vista is not out yet but do you think i will be able to use Vista as well?
    Vista requires 512 of RAM for the basics and 1 Gig of RAM for max performance.
    That's all i have for now, thanks in advance.
    Any help and advice would be greatly appreciated!
    Mac Mini 1.42 GHz G4   Mac OS X (10.3.9)   It's small...?

    1) If ou run it with Boot Camp (i.e. in a dual-boot environment, rather than through virtualization), it will run as well as on a PC with 1 GB of RAM, a 1.66 Ghz Core Duo processor and GMA 950 integrated graphics (quite well, but unsuitable for recent 3D games).
    2) You need a standalone (non-OEM) version of Windows XP Home or Pro with SP2 included, any retail version of Windows XP should do. There are also workarounds that allow you to install other versions of Windows (like Windows XP Media Center).
    3) The Mini should be able to run Vista (some people have already installed Beta versions of Vista on Intel Minis) but how well, I don't know.
    BTW Boot Camp is actually Beta software, and its license ends in February 2007 (or earlier if Leopard is released before then).
    If you need more information, you can also ask in the Boot Camp forum.

  • Can the Late 2012 Mac Mini Server run on Lion, instead of Mountain Lion?

    Since I plan to use this (USB 2) device http://plugable.com/products/UGA-2K-A
    on a (yet to be ordered) Late 2012 Mac Mini Server, I am wondering:
    could that box run on Lion, instead of Mountain Lion ? (the usb 2 device has some M.L. issues still)
    I would not really need the server-part (only want the box because of the 2 disk drives), maybe that influences things.
    Would there be any possibility to order it from Apple with Lion instead of Mountain Lion pre-installed ?
    Could the latest hardware in the box not-function under Lion, thereby necessitating Mountain Lion ?
    Thanks to all for thinking with me!
    Best,
    Arie

    It's simple: you cannot use a version of OS X older than the version that the Mac shipped with.  At the very least, this is because the hardware may not be supported.

  • Mac Mini video out (dvi to HDMI) is always larger than my TV Sony KLV 32S10

    Hello, I'm outputting the video DVI to HDMI to my Sony LCD. I get video, so thats good.
    what is not good, is the extents of the video are just beyond the phsyical parts that I can actually see. what does that mean... It means the tool bars at the top of the display are never visible. It also means that the bar at the bottom , the icons are only about half visible, the top half.
    what can I do to fix that? (seemingly not yet to replace the LCD).
    I did not try a DVI to VGA adapter, or other adapters.
    thanks for any advice!

    huh, so simple...
    I first tried that, but I was left with a very fuzzy / flickery display and thought, no can't be that...
    Put the little mini to sleep and awoke to a nice fitting display.
    thanks for so obvious a solution!

  • Mac mini to S video or composite adapter for tv - nothing but horiz lines

    Have an older analog Toshiba TV. Can't use HDMI so has to be S video or component. I am not receiving a picture, just horizontal lines. Any help is appreciated.

    The component adapter won't work but the S-Video one from Apple should. Try starting in Safe mode and see if you get a usable screen on the TV under conditions of a Safe start.
    http://support.apple.com/kb/HT1455

  • Can a Core Duo (Late 2006) mac mini run 10.6?

    Can a Core Duo (late 2006) mac mini upgrade to 10.6?

    Requirements for OS X 10.6 'Snow Leopard'
    http://support.apple.com/kb/SP575
    The OS 10.6 Snow Leopard install DVD is available for $19.99 from the Apple Store:
    http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
    and in the UK:
    http://store.apple.com/uk/product/MC573/mac-os-x-106-snow-leopard
    When you have installed it, run Software Update to download and install the latest updates for Snow Leopard to bring it up to 10.6.8, or download the combo update from here:
    http://support.apple.com/kb/DL1399
    Check via Software Update whether further updates are required.

  • How can I have the same environment on two macs on is a macbook pro and the other a Mac mini

    How can I have the same environment on two macs on is a macbook pro and the other a Mac mini ?

    Forget trying to use iCloud for this - it won't do what you want.  iCloud syncs certain data like contacts and events, but it doesn't sync "environments" on computers.

  • 2006 Mac Mini running mirrored display on display and HDTV

    I have an early 2006 Mac Mini.  Got a DVI to DVI/VGA splitter as that's the input my TV has(RGB VGA/3.5 audio).  Plugged it in and if I connect it to both my monitor and my TV I get nothing on the TV.  Unplug the monitor and the TV works.  Is there a way to get them to work while both plugged in?  I'm perfectly fine with mirroring. 
    On a side note, I know the max for VGA is going to be 800x600, but it doesn't fill up remotely anywhere near the full screen.  Is there a way to stretch that so that it does that? 
    I just want this to be able to power the display so it can be used and also be able to stream things to my TV, preferably without constant switching of the splitter for the ease of other users. Anyone have any thoughts?  And no, I don't want to spend the money on the Matrox system.  Thanks for the help.

    Now what if I bought a DVI to VGA to connect from the DVI split side into my monitor via VGA, would that work?  Or will it being split into VGA and DVI already screw it up and I therefore need to just get a straight DVI to dual VGA splitter?

  • Using two displays simultaneously on an early intel mac mini

    I would like to connect my Apple display and an LCD TV to my early Intel Mac Mini using a DVI-D splitter and DVI-D cable to the DVI input on the TV. I don't know if this Mac Mini's video card has a single or a duel DVI output. I'm assuming it has to have a duel output to be able to have both displays on at the same time. Also, from what I've read previously in the discussions, I assume I'll have hook up the audio output also, assuming the video works. Thanks for any help.

    I'm pretty sure that can't work for a variety of reasons. Primarily the DVI output on the mini has a single digital output, not two. It has been shown that it can output VGA analog and DVI digital simultaneously when booted under Windows, but the OS X driver for the GMA950 does not support that same trick. So I don't think you are going to be able to do what you want unless you run Windows.
    You could try add-on hardware if you really have your mind set on this. There are USB-to-video adapters out there on the market. They are reported to work pretty well with the caveat that they can't be used for things like full screen video which requires more bandwidth than USB can supply. But for a mostly static display, like using a mail reader or a browser without too much animation, or a spreadsheet, etc., they work well enough.

  • Kanex MIni DisplayPort+USB Audio to HDMI Adapter --NO SOUND

    Hi,
    I just purchased a Kanex Mini DisplayPort+USB Audio to HDMI Adapter for my new Samsung flat screen so I could watch netflix movies. The guy at Tekserve (NYC based authorized dealer) said it's really cool b/c it's audio and video all in one. Two cables are attached to a small box on one side and on the other side of the box is for the HDMI cable which goes to the TV (most of you prpbably already know this) .
    The two attached cables fit into the the USB (audio) + mini display port. The video works great, but no sound. I called Apple for tech support and we tried a few things like changing the sound output to USB, but no luck.
    I can call Tekserve on Monday, but would love to figure this out before then for the week-end.
    Thanks everyone for your help.
    Mary

    There are actually 2 different Mini Display port to HDMI adapters from Kanex. One supports 2 channel audio through the USB audio out cable, which is the one you have Mary. The other one with the extra audio plug cable supports 5.1 digital audio.
    http://kanexlive.com/products/item.aspx?id=3323
    http://kanexlive.com/products/item.aspx?id=3495
    I don't have either of these adapters but I would think that you "should" be able to go into your System Preferences under Sound. If the USB plug from the adapter is plugged into your MacBook, then it should show up in the output window in the Sound preferences which you would then choose instead of outputting the sound to the built-in MacBook speakers.
    At the bottom of the product description page of the adapter that you have (the USB 2.0 version), it says this:
    +Sound Output setting on Macs must be changed to "USB Sound Device/USB Type" to have the adapter operating correctly.+*
    Let us know if you get it working properly. I'm considering getting one also.
    Sorry.... I just re-read your initial post and it sounds like you already DID try switching the sound output to USB with no luck. The only other thing I can think of is the adapter might be bad and maybe exchange it for another one from where you purchased it. Or you could maybe exchange it for the 5.1 digital audio out version. Although it sounds like your sound is going directly into the tv via HDMI and not a surround sound receiver.
    Kanex does have tech support and contact links on their web page. Maybe you should email them directly about your problem. Unfortunately I'm sure you'll have to wait til sometime during the work week to get a reply back.

  • Can i use 2gb memory in one slot in my 2006 Mac mini as the 2 slots of 1gb only reports only 1gb memory, both memory work ok in the one slot

    Can I use 2gb memory in one slot in my 2006 Mac mini as the 2 slots of 1gb only reports as 1gb memory, both memory work ok in the one slot as I have swapped them over

    To my knowledge 1GB modules are the max. size for the 2006 Mini.
    2GB modules are not recognized/useable.
    Sorry
    Stefan

  • Can't download/install on upgraded 2006 Mac Mini

    I have a c 2006 Mac Mini which I have recently upgraded with a Core 2 Duo processor and 2 GB of RAM. The Mini currently runs OS X v. 10.6.8. I bought a copy of OS X 10.7 Lion from the App Store. Even though my Mac now meets the minimum requirements for Lion, the App Store says my Mac is incompatible and won't download the Lion software.
    Interestingly, the error messages I get from the App Store from my attempts to purchase/download 10.7 and 10.8 are different:
    When I tried to buy and download 10.8 Mountain Lion, I get "We could not complete your purchase. OS X Mountain Lion is not compatible with this computer.". When I tried to buy and download 10.7 Lion instead, I get "This version of Mac OS X 10.7 cannot be installed on this computer.".
    Is there any way I can force this install to start?

    If you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then go to https://appleid.apple.com/ and click 'Manage your Apple ID' on the right-hand side of that page and log into your account. Then click on 'Password and Security' on the left-hand side of that page and on the right-hand side you should see an option to send security question reset info to your rescue email address.
    If you don't have a rescue email address (you won't be able to add one until you can answer 2 of your questions) then you won't get the reset option - you will need to contact iTunes Support or Apple to get the questions reset
    e.g. you can try contacting iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Account Management , and then 'Forgotten Apple ID security questions'
    or try ringing Apple in your country and ask to talk to the Accounts Security Team : http://support.apple.com/kb/HE57
    When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down this page to add a rescue email address for potential future use : http://support.apple.com/kb/HT5312

  • Can I use my late 2006 mac mini as an external drive for my late 2012 mac mini?

    I have a (late 2006) Mac mini that I would like to use as an external drive for my (late 2012) Mac mini.  Is this possible and can anyone suggest what cables would be needed.  I am aware that the ports are very different i.e firewire and thunderbolt.  Thanks in advance!

    - You can boo the old Mac in Targe Disk Mode and connect the two via FireWire (FW) You will need a FW 400 to FW 800 cable or a FW 800 or FW 400 cable and appropriate adopters
    How to use and troubleshoot FireWire target disk mode - Apple Support
    - Use the old Mac normally and setup Disk Sharing and access the old Mac via the network. The old Mac's disk will show up  under Devices on the new Mac. One you set up the old Mac yo do not need mouse or keyboard or monitor. You can also setup Screen sharing and actually use the old Mac from the new Mac.
    - Remove the HD from the old Mac and place it in an external USB enclosure of dock and connect it to the new Mac

Maybe you are looking for