HT3155 Can we have Bilingual interface.

Some people like menus in both languages.

If you want something from Apple, best to use the channel they have set up for that:
http://www.apple.com/feedback/
I think the chances of ever getting what you want on a Apple product are very close to zero. If it is really important to you, best buy something that does have that feature.

Similar Messages

Can we have abstract interface

can we have abstract interface if so wats the significance of it?
plz give me an example

public abstract interface AbstractInterface {
}The compiler allows it, so you can have them. But as said it's redundant and discouraged.

Can we have the interface between microsoft excel and adobe illustrator

Can we have the interface between microsoft excel and adobe illustrator?

Feature Request/Bug Report Form
That aside, have you actually already explored variables or the graph tools?
Mylenium

How can I have an english interface to labview if the package is in german

Hi ,
I'm a student that makes a project in Germany using labview ... the problem is that my german is not that good , and the labview is in german so here is my question :
how can I have an english interface to labview if the package is in german (labview 7 )
Any help would be apprecieted.

The only way to really have everything in English is to install an English version of LabVIEW. You may want to talk to your local NI sales representative about the possibility of getting a different version.
Doug M
Applications Engineer
National Instruments
For those unfamiliar with NBC's The Office, my icon is NOT a picture of me

Can we have the Data store as a parameter before starting an interface?

Hi,
We have a scenario in which we need to pass the source and target file names as a
parameter and do the transformation in ODI.
Kindly advice if this is possible.
Thanks,
Leo

Hi,
To further clarify my question, the scenario is as follows:
We have three source tables, which have corresponding target tables in the target schema.
These tables have the same structure... only difference is the table names.
In this case, instead of creating three interfaces, can we create one interface, where
we can send the table names as a parameter for data-stores and invoke the interface?
Thanks,
Leo

Hello my friend just bought an iphone 5 and he is able to imessage me but I can't imessage him with my iPhone 4S, when ever I try it only sends a text message and I Checked and we both have wifi/ service and both have osi7 interface?

Hello my friend just bought an iphone 5 and he is able to imessage me but I can't imessage him with my iPhone 4S, when ever I try it only sends a text message and I Checked and we both have wifi/ service and both have osi7 interface?

I think your problem is the fact that your friend is not registered through iMessage, just text messages. I would look around and check out how to set up iMessage on iPhones.

CAn we have a Fire wire Interface cable longer than 4.5 m

Can I have a fire wire interace cable longer than 4.5m. CVS manual Specifies that better signal intergrity it is better to use less than 4.5 m. But I Found from www.1394store.com that IEEE 1394 cable is available for 10m. If I use this will this work with CVS?

You may be able to use it, but I wouldn't guarantee it. I assume the cable will work with some firewire applications, otherwise the company wouldn't be able to sell it. It may only work at the lower data rates though, so if you are sending large volumes of data it may not work.
I would suggest looking into a repeater. You can use it to connect two 4.5m cables. It is powered from the firewire cable, so it isn't much trouble. You can chain three or four cables together using repeaters before you need to use a powered hub. Some repeaters even have a cable built in on one end. My only concern with a repeater would be making sure the cable stays plugged in.
Bruce
Bruce Ammons
Ammons Engineering

In BPM sync/async Step , can you have different message schema?

Scenario:
File to XI to BPM to SOAP to RFC
In order to trigger the webservice , I use a dummy file which will be polled at a certain frequency- once in 30 minutes in Test mode - this will call the Webservice. The answer of webservice is sent to RFC Async.
so these are the Repository objects I created :
1. File Outbound Async Message Interface- Output Message (File_Request_MT)
2.File Abstract Message Interface-Output Message (File_Request_MT)
3.Async/ sync bridge Abstract interface to call the Webservice
4 Webservice Inbound Sync Message interface- with both input and output message
5.RFC Inbound Async message interface- input message (RFC_Request)
6 RFC Abstract Async Message interface-input message (RFC_Request)
BPM
a) Receive step which uses the the object 2.
b) Sync send which uses object 3
c) Send step which uses Object 5
I am using a BPM to Receive the file data/ "request " by using the File abstract message interface
Then use the the object 3 to call the webservice in BPM .
My question is on this step
Can I have for the abstract Interface(Object 3) the Request message as File_Request_MT and
response message as (RFC_Request) ?
I use a message mapping to map Input and Ouput message of Object 3 with Object 4.
Thanks for your insight

Raj,
Thanks for the feedback , but I have a question regarding your reply
Interface Objects
Object 1: File_Request_Abs
Object 2: Soap_Response_Abs
Object 3:Soap_Abs_Synch
Output Message:File_Request_Abs
Input Message:Soap_Response_Abs
Object 4:Rfc_Request_Abs
The question is about
a)SOAP_RESPONSE_ABS : could you please tell me why do we need an abstract interface -SOAP_RESPONSE_ABS?
I created a message type MT_SOAP_RESPONSE and used that in the BPM sync Send step as the Input message.
b)Soap_Abs_Synch- I am using message types
MT_File_request and MT_SOAP_Response From your reponse, it looks like you are suggesting to use
Abstract Interfaces as Output message and Input Message, am I correct? Could you please tell me whether this has advantages over using message types MT_file_request and MT_soap_reponse? I haven't used Abstract interfaces before as Input message and output message; infact, I wasn't even aware that it can be. Please confirm that it is possible. Thank you for increasing my knowledge !!!
These are the Objects I created
Message Type :
a) MT_Filerequest
b) MT_SOAPresponse
Message Interface
a)MI_Filerequest_out_async -
Output message
Mess. type MT_filerequst
b)MI_filerequest_async_abs-
Mess. type MT_filerequst
Used
i) used for BPM receiver step- container definition
ii) receiver determination
c)MI_webservice_sync_in - This is created from External definition
d)MI_webservice_sync_abs-
Input message - MT_soapresponse
Output message- MT_fierequest
Used:
i) used for BPM sync send step ,
ii)Interface mapping between MI_Webservice_sync_in and MI_webservice_sync_abs
iii)Container element-SOAP_response
e) MI_RFC_async_out
Input message
RFC_Request(This is imported from RFC definition)
g) MI_RFC_async_abs
Input message
RFC_Request(This is imported from RFC definition)
Mapping
Message mapping
i)Filerequest_TO_SOAPrequest
Source: MT_Filerequest
Target: SOAPrequest(Got from External definition)
ii)SOAPresponse_TO_BPM_response
Source : SOAPresponse(got from External definition)
Target : MT_SOAPresponse
Interface Mapping
i)IM_BPM_TO_SOAP
Source Interface : MI_webservice_sync_abs
Target :MI_webservice_sync_in
uses following message mapping
Request : filerequest_TO_SOAPrequest
Response:SOAPresponse_TO_BPM_response
BPM container element
i)Receiver_container TYPE MI_Filerequest_out_async
ii)SOAP Responsecontainer TYPE MI_webservice_sync_abs
iii)RFC_Request_container TYPE MI_RFC_async_abs
BPM flow
Receive---->Send Synch-->Transformation----->Send Asynch
Receive -
> receiver_container
Send Synch -
> receiver_container(Request Message), Soap_response_container(Response Message)
Transformation -
> Source(Soap_response_container), Target(RFC_request_container)
Send Asynch -
> RFC_request_container
Thanks for your help!!!

I can Ping FW inside interface but can not connect to remote resources

dear all
i configer my asa 5520 through ASDM to enable VPN Connection , i follow the cisco steps and it works fine and the anyconnect version 3.1 in Windows 8 - one day troubleshoot for this point only - can connect and have an IP address from the range , but i have something wrong in NAT may be because all guides talking about old ASDM ( NAT Exempt) but i am confeused to apply it on the new ASDM.
i can ping the inside interface from my labtop which using anyconnect , but i can not access anything else inside my network
Please anyone has a solution , please describe it using ASDM , thanks for help
This is my configuration
interface GigabitEthernet0/1
description
nameif SRV_ZONE
security-level 50
ip address 192.168.1.1 255.255.255.0
interface GigabitEthernet0/2
description
nameif TRUST_ZONE
security-level 100
ip address 172.17.200.1 255.255.255.0
interface GigabitEthernet0/3
shutdown
no nameif
no security-level
no ip address
interface Management0/0
nameif MGMT
security-level 0
ip address 10.10.10.1 255.255.255.0
dns server-group DefaultDNS
domain-name xxx.xxx.xxx
object network obj-192.168.1.11
host 192.168.1.11
object network obj-xxx.xxx.xxx.xxx
host xxx.xxx.xxx.xxx
object service obj-tcp-source-eq-25
service tcp source eq smtp
object network obj-192.168.1.12
host 192.168.1.12
object network obj-xxx.xxx.xxx.xxx
host xxx.xxx.xxx.xxx
object network obj-192.168.1.0
subnet 192.168.1.0 255.255.255.0
object service obj-tcp-eq-25
service tcp destination eq smtp
object network obj_any
subnet 0.0.0.0 0.0.0.0
object network obj-0.0.0.0
host 0.0.0.0
object network obj_any-01
subnet 0.0.0.0 0.0.0.0
object network obj-172.17.8.8
host 172.17.8.8
object network obj-172.17.0.0
subnet 172.17.0.0 255.255.0.0
object network obj_any-02
subnet 0.0.0.0 0.0.0.0
object network obj_any-03
subnet 0.0.0.0 0.0.0.0
object network obj_any-04
subnet 0.0.0.0 0.0.0.0
object network obj_any-05
subnet 0.0.0.0 0.0.0.0
object network obj_any-06
subnet 0.0.0.0 0.0.0.0
object network obj.172.17.8.115
host 172.17.8.115
object network obj.xxx.xxx.xxx.xxx
host xxx.xxx.xxx.xxx
object service http
service tcp source eq www destination eq www
object network obj.xxx.xxx.xxx.xxx
host xxx.xxx.xxx.xxx
object service https
service tcp source eq https destination eq https
object service newservice
service tcp source eq pop3 destination eq pop3
object network mail
host 172.17.8.8
description mail
object network 192.168.1.11
host 192.168.1.11
description smtp
object service smtpnew
service tcp source eq 587 destination eq 587
object network VPN_RANGE
description VPN ACCESS RANGE
object network VPN_PoOL
subnet 172.17.16.0 255.255.255.0
description vpn
object-group network DM_INLINE_NETWORK_1
network-object host 192.168.1.11
network-object host 192.168.1.12
object-group network Eighth_Floor
network-object 172.17.8.0 255.255.255.0
object-group service WEB_SERVICES
service-object tcp destination eq www
object-group network ENT_SERVERS
network-object host 192.168.1.11
network-object host 192.168.1.1
object-group network DM_INLINE_NETWORK_2
network-object 172.17.200.0 255.255.255.0
network-object 172.17.8.0 255.255.255.0
object-group service DM_INLINE_TCP_2 tcp
port-object eq www
port-object eq https
port-object eq smtp
object-group service web tcp
port-object eq www
port-object eq xxx
port-object eq ftp
port-object eq xxx
port-object eq xxx
object-group service xxx_Web_and_Email
service-object object http
service-object tcp destination eq pop3
service-object tcp destination eq smtp
object-group protocol TCPUDP
protocol-object udp
protocol-object tcp
object-group protocol DM_INLINE_PROTOCOL_1
protocol-object udp
protocol-object tcp
object-group protocol DM_INLINE_PROTOCOL_2
protocol-object ip
object-group protocol DM_INLINE_PROTOCOL_3
protocol-object ip
access-list DMZ_access_in extended permit ip 192.168.1.0 255.255.255.0 172.17.0.0 255.255.0.0
access-list DMZ_access_in extended permit ip 192.168.1.0 255.255.255.0 any
access-list justice_splitTunnelAcl standard permit 10.100.100.0 255.255.255.0
access-list xxx-VPN_splitTunnelAcl remark vpn
access-list xxx-VPN_splitTunnelAcl standard permit 172.17.16.0 255.255.255.0
access-list xxx-VPN_splitTunnelAcl standard permit any
access-list cap extended permit tcp any host xxx.xxx.xxx.xxx eq smtp log
access-list cap1 extended permit tcp host 192.168.1.11 any eq smtp
access-list SRV_ZONE_nat_outbound extended permit tcp 192.168.1.0 255.255.255.0 any eq smtp
access-list SRV_ZONE_nat_outbound extended permit ip host 192.168.1.11 any
access-list TRUST_ZONE_access_in extended permit ip host 172.17.88.108 any
access-list TRUST_ZONE_access_in extended permit object-group DM_INLINE_PROTOCOL_2 10.10.3.0 255.255.255.0 any
access-list TRUST_ZONE_access_in extended permit object-group DM_INLINE_PROTOCOL_3 10.10.50.0 255.255.255.0 any
access-list TRUST_ZONE_access_in extended permit ip 172.17.8.0 255.255.255.0 any
access-list TRUST_ZONE_access_in extended permit ip 172.17.200.0 255.255.255.0 any
access-list TRUST_ZONE_access_in extended permit ip 172.17.0.0 255.255.0.0 host 192.168.1.12
access-list TRUST_ZONE_cryptomap extended permit ip xxx.xxx.xxx.xxx 255.255.255.248 any
access-list outside_access_in extended permit tcp any host 192.168.1.11 eq smtp
access-list outside_access_in extended permit tcp any host 172.17.8.8 eq www
access-list outside_access_in extended permit tcp any host 192.168.1.12 object-group web
access-list outside_access_in extended permit tcp any host 172.17.8.8 eq pop3
access-list outside_access_in extended permit ip 172.17.16.0 255.255.255.0 any inactive
access-list vpn remark vpn
access-list vpn standard permit 172.17.16.0 255.255.255.0
pager lines 24
logging enable
logging trap informational
logging asdm informational
logging host TRUST_ZONE 172.17.8.100
mtu INT_ZONE 1500
mtu SRV_ZONE 1500
mtu TRUST_ZONE 1500
mtu MGMT 1500
ip local pool VPN_POOL 172.17.16.100-172.17.16.254 mask 255.255.255.0
ip verify reverse-path interface INT_ZONE
ip verify reverse-path interface SRV_ZONE
no failover
icmp unreachable rate-limit 1 burst-size 1
icmp permit any SRV_ZONE
icmp permit any TRUST_ZONE
asdm image disk0:/asdm-635.bin
no asdm history enable
arp timeout 14400
nat (SRV_ZONE,INT_ZONE) source static obj-192.168.1.11 obj-xxx.xxx.xxx.xxx service any obj-tcp-source-eq-25
nat (SRV_ZONE,INT_ZONE) source static obj-192.168.1.12 obj-xxx.xxx.xxx.xxx
nat (SRV_ZONE,INT_ZONE) source dynamic obj-192.168.1.0 interface service obj-tcp-eq-25 obj-tcp-eq-25
nat (INT_ZONE,SRV_ZONE) source static any any destination static 192.168.1.11 obj-172.17.8.8 service obj-tcp-source-eq-25 obj-tcp-source-eq-25
nat (TRUST_ZONE,INT_ZONE) source static VPN_PoOL VPN_PoOL destination static VPN_PoOL VPN_PoOL
object network obj_any
nat (SRV_ZONE,INT_ZONE) dynamic obj-0.0.0.0
object network obj_any-01
nat (SRV_ZONE,MGMT) dynamic obj-0.0.0.0
object network obj-172.17.8.8
nat (TRUST_ZONE,INT_ZONE) static xxx.xxx.xxx.xxx service tcp www www
object network obj-172.17.0.0
nat (TRUST_ZONE,SRV_ZONE) static 172.17.0.0
object network obj_any-02
nat (TRUST_ZONE,INT_ZONE) dynamic interface
object network obj_any-03
nat (TRUST_ZONE,SRV_ZONE) dynamic interface
object network obj_any-04
nat (TRUST_ZONE,INT_ZONE) dynamic obj-0.0.0.0
object network obj_any-05
nat (TRUST_ZONE,SRV_ZONE) dynamic obj-0.0.0.0
object network obj_any-06
nat (TRUST_ZONE,MGMT) dynamic obj-0.0.0.0
object network obj.172.17.8.115
nat (TRUST_ZONE,INT_ZONE) static obj.xxx.xxx.xxx.xxx service tcp www www
object network mail
nat (TRUST_ZONE,INT_ZONE) static obj-xxx.xxx.xxx.xxx service tcp pop3 pop3
nat (TRUST_ZONE,INT_ZONE) after-auto source static obj-172.17.8.8 obj-xxx.xxx.xxx.xxx service https https
access-group outside_access_in in interface INT_ZONE
access-group DMZ_access_in in interface SRV_ZONE
access-group TRUST_ZONE_access_in in interface TRUST_ZONE
route INT_ZONE 0.0.0.0 0.0.0.0 xxx.xxx.xxx.xxx 1
route TRUST_ZONE 10.10.0.0 255.255.0.0 172.17.200.254 1
route TRUST_ZONE 10.11.0.0 255.255.0.0 172.17.200.254 1
route TRUST_ZONE 10.12.0.0 255.255.0.0 172.17.200.254 1
route TRUST_ZONE 10.13.0.0 255.255.0.0 172.17.200.254 1
route TRUST_ZONE 172.17.0.0 255.255.0.0 172.17.200.254 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-record DfltAccessPolicy
aaa authentication enable console LOCAL
aaa authentication http console LOCAL
aaa authentication ssh console LOCAL
aaa authentication serial console LOCAL
http server enable
http 172.17.8.0 255.255.255.0 TRUST_ZONE
http 172.17.8.155 255.255.255.255 TRUST_ZONE
http 172.17.8.45 255.255.255.255 TRUST_ZONE
http 10.10.10.2 255.255.255.255 MGMT
http 192.168.1.12 255.255.255.255 SRV_ZONE
http 0.0.0.0 0.0.0.0 INT_ZONE
http 172.17.200.0 255.255.255.0 TRUST_ZONE
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto dynamic-map pol 1 match address TRUST_ZONE_cryptomap
crypto dynamic-map pol 1 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto map INT_ZONE_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map TRUST_ZONE_map0 1 ipsec-isakmp dynamic pol
crypto map TRUST_ZONE_map0 interface TRUST_ZONE
crypto map INT_ZONE_map0 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map INT_ZONE_map0 interface INT_ZONE
crypto ca trustpoint ASDM_TrustPoint0
enrollment self
fqdn SEC-xxx-FW1
subject-name CN=SEC-xxx-FW1
no client-types
proxy-ldc-issuer
crl configure
crypto ca trustpoint ASDM_TrustPoint1
enrollment self
subject-name CN=SEC-xxx-FW1
keypair sslvpnkeypair
crl configure
crypto ca certificate chain ASDM_TrustPoint0
certificate 31
    57f4e52e 6b851966 77515d62 c209a0df 1c32ce94 bb90cbce 497cfd04 6745ea85
    efb75f85 2ae1ad35 344d94ab 915e01ab d3292626 ac697a52 b4ed6632 d3ed2332 ae
quit
crypto ca certificate chain ASDM_TrustPoint1
certificate e6054352
    c64f3661 30f14c3d 06b5f039 9f14560d 3b154fd1 42782268 7531689e 8e547d91
    85e88415 e326f653 74733a6c a3f5c935 f7e83f56 f6
quit
crypto isakmp enable INT_ZONE
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
crypto isakmp policy 65535
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
telnet timeout 5
ssh 0.0.0.0 0.0.0.0 INT_ZONE
ssh 172.17.8.0 255.255.255.0 TRUST_ZONE
ssh 10.10.10.2 255.255.255.255 MGMT
ssh timeout 5
console timeout 0
management-access TRUST_ZONE
vpn load-balancing
interface lbpublic INT_ZONE
interface lbprivate INT_ZONE
priority-queue INT_ZONE
tx-ring-limit 256
threat-detection basic-threat
threat-detection scanning-threat
threat-detection statistics host number-of-rate 3
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
ssl trust-point ASDM_TrustPoint1 INT_ZONE
webvpn
enable INT_ZONE
svc image disk0:/anyconnect-win-2.1.0148-k9.pkg 1
svc enable
tunnel-group-list enable
group-policy xxx-VPN internal
group-policy xxx-VPN attributes
dns-server value xx.xx.xx.xx xx.xx.xx.xx
vpn-tunnel-protocol IPSec
split-tunnel-policy tunnelspecified
split-tunnel-network-list value xxx-VPN_splitTunnelAcl
group-policy DfltGrpPolicy attributes
vpn-tunnel-protocol webvpn
group-policy GPNEW internal
group-policy GPNEW attributes
dns-server value 172.17.8.41
vpn-tunnel-protocol IPSec l2tp-ipsec svc webvpn
default-domain value xxx.xxx.xxx
address-pools value VPN_POOL
username VPNAM password xxx encrypted
username VPNAM attributes
service-type remote-access
vpn-group-policy xxx-VPN
tunnel-group xxx-VPN type remote-access
tunnel-group xxx-VPN general-attributes
dhcp-server 172.17.8.41
tunnel-group xxx-VPN ipsec-attributes
pre-shared-key *****
tunnel-group pol type ipsec-l2l
tunnel-group pol ipsec-attributes
pre-shared-key *****
trust-point ASDM_TrustPoint0
tunnel-group SSLClientProfile type remote-access
tunnel-group SSLClientProfile general-attributes
address-pool VPN_POOL
default-group-policy GPNEW
tunnel-group SSLClientProfile webvpn-attributes
group-alias SSLVPNClient enable
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect netbios
inspect rsh
inspect rtsp
inspect skinny
inspect sqlnet
inspect sunrpc
inspect tftp
inspect sip
inspect xdmcp
inspect ip-options
inspect pptp
service-policy global_policy global
prompt hostname context
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:78a941e3f509dec8f3570c60061eedaa
: end

thanks god
i solve the problem
the problem is in NAT
i creat an object with the ip address host from VPN pool and name it vpn
then i do the nat from inside to that host as the following picture...
trust zone is the inside zone
vpn is the outside vpn host...
thanks and hope it helps anyone else...

TS2972 can i have two apple id's on the one mac system?

I have an iphone 4s and my husband just got the new iphone 5. I have created him a new apple id. is it possible for us both to use the same itunes library i we have different id's?
thanks

iOS does not support multiple users like a desktop OS does.
You can use a web interface to your respective email accounts
to keep things separate; but there is no provision for otherwise
separating photos, media, etc.
If you wish, you can contact Apple to let them know of your desire:
www.apple.com/feedback

I am uploading receipts using the PURCHASE_ORDER_RECEIPT EIP. When I upload serialized assets each one is processed as a separate receipt (receiver_id). How can I have these all aggregated on the same receipt?

I am uploading receipts using the PURCHASE_ORDER_RECEIPT EIP. When I upload serialized assets each one is processed as a separate receipt (receiver_id). How can I have these all aggregated on the same receipt?
Is there a parameter I should be using in the XML or is there a setting in Peoplesoft that will accomplish this?
Jim

sundy.liu wrote:
Unfortunately however, even with the TCP tweaks enabled, I still only get a little over 1 Gb/s through the two aggregated Gig ports. It seems as though the aggregation is only using one port, though MRTG graphs of the two switch ports do in fact show that they are both being utilized equally, essentially splitting the 1 Gb/s speed between
the two ports.
Problem with the server? switch? Aggregation software? All the above? At any rate, I seem to be missing something.. Any help regarding this issue would be greatly appreciated!If you're only running a single stream, that's all you'll see. Teaming/aggregating doesn't make one stream go faster.
If you ran two streams simultaneously, then you should see a difference between a single 1G interface and an aggregate of two 1G interfaces.
Darren

HT5622 Can I have two apple id's on the same iPad. Example me and my spouse want to share the iPad but have different id's

Can I have two apple id's on the same iPad. Example me and my spouse want to share the iPad but have different id's

iOS does not support multiple users like a desktop OS does.
You can use a web interface to your respective email accounts
to keep things separate; but there is no provision for otherwise
separating photos, media, etc.
If you wish, you can contact Apple to let them know of your desire:
www.apple.com/feedback

Can we have a POLL for UI element Enhancements proposal as in WDJ Forum

Dear Moderator
Can we have a POLL where we can suggest UI element/Functionality enhancements in WDA like the one we have in Web Dynpro Java Forum.
This can be useful for next releases of Web Dynpro ABAP.
Thanks
Abhimanyu

Some more.
6) Currently if we have Cell Variants, they have to be bound to context for the key values of corresponding cell editor.
If the key value doesnt match to any of the cell editor keys, application dumps saying invalid key. Instead of dumping, can there be a default editor, incase the key doesnt match?
7) ALV loosing the lead selection, when the view layout has sort order.
     - I understand that this is required up on certain context changes like rebinding complete data. However most of the times, we want to re-select the previous lead selection before ALV Refresh had reset it.
     As this happens inside Modify view of ALV, unless otherwise we use explicit Refresh, there is no other option.
     Is it possible for ALV to throw an event if the ALV services like Sort has lead to any context changes like Lost of Lead selection?
8) Search helps:
This requirement came from many users. Users would like to have custom search helps with in DDIC Search Help.
This can be any popup for performing search not just another DDIC search help. I am not sure but I think this is possible with Screen programming but not in WD.
Also more control is required to handle to F4 or Simulate F4, i.e. for example, to throw the same DDIC Search help if the user hits Enter.
The major functionality that users will miss, if they other search helps like OVS or Custom Search help, is the Personal Value List (PVL). Can we have some WD interface methods, that will help to enable/disable PVL with these custom search helps
9) Mandatory attributes check:
The current WD utilities mandatory attribute check method, does not return all the mandatory attributes for that View and context.
Also it works on lead selected data. Assuming there are hundreds of elements in context (for an ALV/Table), and the detail view has some mandatory attributes, this check has to be done every time for each and every lead selection.
Also, most of the times, the child node data changes based on parent node data. In these situations we will need all the mandatory attributes upfront and required checks has to be executed.
It will help a lot if the mandatory attributesto are passed back by the WD Utilities method once it calculates.
Thanks,
Anand
Edited by: Anand Nidamanuru on Dec 11, 2009 10:10 AM

Can I have more than one version of Reader on the same machine?

I'm running Reader 8 because I like the user interface better than the more recent versions. I'd like to also install the latest version only for some integrated tools that require it for use with AIR. Can I have both installed? I don't see any options when I try to download and install the latest versions (like where to install the software. Ideally I'd like Reader 8 to be my default application to open .pdf documents.
Thanks in advance,
Gabor

C F,
Thanks for the reply. In the meantime I have found that my integrated tools (Xilinx Document Navigator) allow me to open documents externally using any version / brand of reader. It's not quite as nice as seeing the documents in the tool's own windows, but it's a good enough option for me given the relative infrequency I use this tool. If I decide to try to integrate the Document Navigator with Adobe Reader, I might get away with using Reader 10. Is there an app note on installing more than one version, or is this so "not recommended" that I'm on my own if I want to try it?
Regards,
Gabor

How can I have the side bar in iTunes 12??

I just installed iTunes 12 that was claimed to provide "a more pleasant interface for navigation"!?!?
Personally, I do not find the new view format pleasant at all. I expected to be allowed to go back to the lateral bar visualization, finding it as a view option. It was quite upsetting finding out that the option disappeared from the menue. Did you have the brilliant idea to remove it, or did you simply hide it somewhere else? (I am definitely too old to play "hide and seek" with visualization options and I really do not have the time either)
Probably, kids like big figures that do not require any reading skill, unfortunately I do not.
I conclusion, how can I have the side bar visible again in iTunes 12???
Thank you
P.S. Playlists is similar to lateral bar, but not the same, as it is not ONE allowing to navigate music, movies, podacast, but one for each.

The functionality of the sidebar has changed indeed. But what's the problem? Category's of the library have been separated from playlists and moved to one of the top bars. I think it's an improvement for people using iTunes as a media-management tool. In the old version the playlists were at the bottom of the sidebar and if you had all options activated you had to scroll down to find your playlists.
You don't have to do that anymore. Your music library is now aside with the playlists. If you want to activate another categorie you can use the icons in the topbar and still keep the overview on your playlists.
People who use iTunes for syncing iDevices seem less happy with this new presentation. It seems a minor adjustment to me, but others seems to think otherwise.

HT3155 Can we have Bilingual interface.

Similar Messages

Maybe you are looking for