HT3176 How can the slow motion playback speed be adjusted on Apple TV (pause and clicking right/left)?

I am looking to adjust the paused slow motion playback speed of Apple TV. On one of my Apple Tv's when paused I can click right or left to view tv in frame advance (or one second advance) on a different Apple TV there does not appear to be any advance even after multiple clicks. But, it will jump 10 seconds when paused and left or right is held down as it should.
Third gen. (A1427) Apple TV Software version on both 7.0.3

Unfortunately with that speed you are not going to have a good experience with HD streaming. I would make sure everything is set to stream SD. Go into the settings - iTunes Store and you can switch there for any purchases/rentals made through them.
If you use Netflix (or other streaming sites) go into your account(s) and see if you can switch to a lower quality stream. I know Netflix has that in place.

Similar Messages

How can the info block be assigned with the view and assign view to users.

Dear Friends,
Anyone could plz tell me how can the info block be assigned with the view and assign view to users. Also how can the info block in sale summary be assigned with a view and how to assign this view for user.
Regards,
Ashima

Hi,
To define view and to make it default
Goto SAP IMG > Sales and Distribution > Sales Support (CAS) > Sales Summary > Define Reporting Views (Tcode:OVCD).
To assign default user to the view.
Goto SAP IMG > Sales and Distribution > Sales Support (CAS) > Sales Summary > Assign Default View To User (Tcode:OVCC).
To assign Elements of SAPScript "SD-SALES-SUMMARY" to information Blocks To A View use
Goto SAP IMG > Sales and Distribution > Sales Support (CAS) > Sales Summary > Assign Information Blocks To A View (Tcode:OVCB).

I was listening to an audiobook and somehow managed to speed up the reader, How can I slow the reader back down to a reasonable speed?

I was listening to an audiobook and somehow managed to make the reader talk faster. How can I slow the reader back down?

On the right side of the playing screen right below the scurbber bar is the speed setting box. It has 1/2X, 1X or 2X, the playback speeds. Tap the bax to change and cycle through the speeds.

My mac mini is running very slow all of a sudden, how can i restore it's speed?

my mac mini is running very slow all of a sudden, how can i restore it's speed?

This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve your problem.
If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
Below are instructions to run a UNIX shell script, a type of program. All it does is to gather information about the state of your computer. That information goes nowhere unless you choose to share it on this page. However, you should be cautious about running a program at the instance of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them.
Here's a summary of what you need to do: Copy a line of text from this web page into the window of another application. Wait about a minute. Then paste some other text, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in your browser, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
clear; shopt -s extglob; Fb='%s\n\t(%s)\n'; Fm='\n%s:\n\n%s\n'; Fs='\n%s: %s\n'; Fu='User %s%%\t\tSystem %s%%'; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; R () { o=; [[ r -eq 0 ]]; }; Pm () { [[ "$o" ]] && o=`sed 's/^ */ /' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pc () { o=`egrep -v '^[[:blank:]]*($|#)' "$2"`; Pm "$1"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o="${o##+( )}"; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; id | grep -qw '80(admin)'; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; system_profiler SPSoftwareDataType | sed '8!d;s/^ *//'; o=`system_profiler SPDiagnosticsDataType | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; o=`pmset -g therm | sed 's/^.*CP/CP/'`; grep -q 'No th' <<< "$o" && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; grep -q '= [^GO]' <<< "$o" || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; o=`ls /L*/L*/Dia*/*.panic | wc -l`; Ps "Panics"; o=`ls /L*/L*/Dia*/*.c* | tail`; Pm "System crash logs"; o=`ls L*/L*/Dia* | tail`; Pm "User crash logs"; o=`syslog -F bsd -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|n Cause: -|NVDA\(|pagin|SATA W|timed? ?o' | tail -n25 | awk '/:/{$4=""; $5=""; print}'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; [[ o -lt 5120 ]] && Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 90 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Pm "Total CPU usage" && s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); o=${s[2]}%; Ps "CPU usage by process $s of user ${s[1]}"; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); s[2]=${s[2]%[+-]}; o=$((s[2]>=25000?s[2]:0)); Ps "Mach ports used by process $s of user ${s[1]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|post[fg]|x)/{print $3}'`; Pm "Extrinsic system jobs"; o=`launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; for d in {/,}L*/{La,Priv,Sta}*; do o=`ls -A "$d" | egrep -v '^(\.DS_Store$|com\.apple\.)'`; Pm "$d"; done; o=`find -L /S*/L*/E* {/,}L*/{A*d,Compon,Ex,In,Keyb,Mail,P*P,Qu,Scripti,Servi,Spo}* -type d -name Contents -prune | while read d; do ID=$($PB\ :CFBundleIdentifier "$d/Info.plist") || ID="No bundle ID"; egrep -qv "^com\.apple\.[^x]|Accusys|ArcMSR|ATTO|HDPro|HighPoint|driver\.stex|hp-fax|\.hpio|JMicron|microsoft\.MDI|print|SoftRAID" <<< $ID && printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find /u*/{,*/}lib -type f -exec sh -c 'file -b "$1" | grep -qw shared && ! codesign -v "$1"' {} {} \; -print`; Pm "Unsigned shared libraries"; o=`launchctl getenv DYLD_INSERT_LIBRARIES`; Pm "Inserted libraries"; o=`find {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; Ps "DNS"; R && o=`sudo profiles -P | grep :`; Pm "Profiles"; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; Pc "hosts" <(egrep -v '(local|broadcast)host' /etc/hosts); Pc "User launchd" ~/.launchd; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed 's/\..*$//;s/-[1-9]$//'; o=`find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $ | wc -l`; Ps "Restricted user files"; cd; o=`system_profiler SPFontsDataType | egrep "Valid: N|Duplicate: Y" | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist ! -exec sh -c 'plutil -s "$1" >&-' {} {} \; -print`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in {0..1}; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} files"; done; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign ($) or a percent sign (%). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important.
If you're not logged in as an administrator, you won't be prompted for your password. The test will still run. It just won't do anything that requires administrator rights.
The test may take up to a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. There is no indication of progress until it's done. Wait for the line "[Process completed]" to appear in the Terminal window. If you don't see that line within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report your results. No harm will be done.
When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
When you post the results, you might see the message, "You have included content in your post that is not permitted." That's because the forum software falsely identifies something in the post as a violation of the terms of use. If that happens, please post the results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of Apple Support Communities ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

I have the iphone 4s and i received a video but its in slow motion now is there any way to convert the slow motion to regular speed with my 4s

i have the iphone 4s and i received a video but its in slow motion now is there any way to convert the slow motion to regular speed with my 4s

Only your service provider can unlock the phone. Check with the provided.

Copied slow motion video from iphone 5s to my pc but play at normal speed - how play in slow motion?

Copied slow motion video from iphone 5s to my pc but now play at normal speed - how play in slow motion?

You have to email it to yourself to preserve the slow-motion effect.

How can i SLOW [not speed] scrolling speed in Windows FF?

How can i SLOW [not speed] scrolling speed in Windows FF?

I'm not very familiar with trackballs, but I'll add a comment regarding the keyboard part.
''ameame [[#answer-722079|said]]''
<blockquote>
When i press my spacebar or keyboard arrow key, [all] pages scroll too fast.</blockquote>
On my Firefox, the spacebar skips down a screenful at a time, like the PgDn key. When that repeats, it's certainly going to cover a lot of ground, and a lot faster than the down arrow key. But pressing the spacebar a few times can be efficient if you don't hold it down continuously.
The distance covered by the up and down arrow keys can be modified using a different preference:
(1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(2) In the search box above the list, type or paste '''scroll''' and pause while the list is filtered
(3) Scroll all the way down to '''toolkit.scrollbox.verticalScrollDistance''' which usually has a default value of '''3'''
* If the preference is bolded and user set to a value higher than 3, use right-click > Reset to set it back to 3 and test how that works for you (test on a normal web page, not the about:config page)
* To reduce the number of lines below 3, double-click to edit and type a smaller number and then you can test that (test on a normal web page and not the about:config page)
Does that help at all?
''Note: I assume you are not using "Caret Browsing" which moves the cursor through the text of the document when you press the up and down arrow keys. The results can be somewhat unpredictable depending on the layout of the page. If you want to test that feature, you can turn it on and off by pressing the F7 function key.''

When I try to drag and drop to combine events in iPhoto, the drag accelerates out of control when it reaches the top or bottom of the screen. How can I slow it down?

When I try to drag and drop to combine events in iPhoto, the drag accelerates out of control when it reaches the top or bottom of the screen. How can I slow it down?

from iphoto Help
Album overview
A photo album in iPhoto is just like one you would create with printed photos: It’s a collection of photos you select from your library and arrange in the order you want.
You can create photo albums to:
Focus on a particular subject, such as your favorite nature photos
Group pictures that you want to send to a friend, post on a webpage, or burn to a CD or DVD
Gather a decade of anniversary photos
iPhoto has two kinds of photo albums:
Standard photo albums: You create these albums (B, shown below) by selecting particular photos. You can add new photos by dragging them to the album (or using the Add To button), and you can remove photos at any time. All adding and removing is done manually; iPhoto doesn’t update standard albums automatically as you import new photos.
Smart Albums: iPhoto creates these albums for you, based on criteria your specify. iPhoto then updates Smart Albums (A, shown above) for you as your library changes. For example, you could create a Smart Album containing:
Photos of specific people, such as your family members. As you import new photos, iPhoto uses Faces to detect your family members, and automatically adds new photos of them to the Smart Album (after you’ve confirmed the matches in Faces).
All the photos of your daughter taken on school field trips in third grade. Use Faces (to name your daughter) and keywords (to mark certain photos or events as “field trips”) to help specify the photos you want iPhoto to place in that Smart Album.
Only photos taken with a specific camera, or photos matching other Exchangeable Image File (EXIF) information.
You can make as many albums as you like, and you can include the same photo in several albums without making multiple copies of it.
After you create an album, such as “Australia Adventures,” it appears in your Source list below Albums.
In full-screen view, the album appears as a stack of photos below Albums.
To further organize your library, you can group several albums (along with slideshows and projects) into a folder. For example, you could create a folder containing several years of birthday albums or a collection of albums with photos of your camping trips.
To create a folder, see “Create a folder in the Source list and move items into it” in “Customize the Source list”.
Folders appear only in the Source list, not in full-screen view.
Note: A photo album is different from a photo book, which is a collection of photos you create to get professionally printed and bound. See this topic: Photo book overview.
Copyright © 2014 Apple Inc. All rights reserved.
LN

How can I slow down the music of my clip?

How can I slow down the music of my clip?

Try using the following code after each time you write to the TextArea. I am assuming you are using a TextArea component and are trying to control the position of where it is scrolled to when it refreshes with the chat data.
"ta" is the instance name of the TextArea
ta.verticalScrollPosition = ta.maxVerticalScrollPosition;

How can I slow down my movie?

Hi,
I have created a logo using several objects. And they come one by one on my stage while playing. But these objects (which all are movie clips) coming too fast. How can I slow down them?
Thanks.

kglad wrote:
add more frames to the timeline that has your logo tween.
I have added more key frames but the speed is still fast. What is the next step to slow it down, please.
Thanks.

Turn off the slow motion

hi,
I download from my gopro movie that i record last week to my iPhone.
in my iPhone i can turn off the slow motion but i cant save the movie as a regular movie ans send it to my friend.
always the movie appear as slow motion movie/
what should i do?

I think your answer is there:
http://www.wired.com/gadgetlab/2013/10/how-to-use-os-x-mavericks/#slideid-227971

How can I control my fan speed?

How can I control my fan speed on my macbook pro? I use SMC for gaming and streaming video from the internet when using my Mac OS, but I partitioned my drive and installed Windows 8 in order to play a different game (not a huge game) and the computer heats up dramatically when playing on Windows through Boot Camp to the point that it freezes every time (it never does this when playing a mac game or streaming on the normal partition Mac OS).
Any suggestions or programs to control fan speed of the mac from windows?

Get a cooling pad. That will much better than trying to constantly adjust fan speeds.
Ciao.

I would like to know when the slow motion video recording will come in 5c. in which update u will release it.

Dear sir ,
i would like to know when the slow motion video recording will come in 5c. in which update u will release it.

I'm afraid the processor in the iPhone 5c does not support that feature. Since you can't change the hardware setup inside the phone, this will probably not be introduced at all for this model.

How can i get acsess to my data if my iphone is shut and can´t open any more??how can i get acsess to the memory card, how can i get acsess to my data if my iphone is shut and can´t open any more??how can i get acsess to the memory card

how can i get acsess to my data if my iphone is shut and can´t open any more??how can i get acsess to the memory card????please help

You can't. There is no memory card. It uses flash memory that's soldered to the logic board. If you didn't back it up, your data is gone.

My old email address was hacked and I am no longer able to access it. How can i reset my icloud ID without losing all of my pictures and more inportantly contacts? I have created a new ID but i cannot seem to use it until I delete the old account

my old email address was hacked and I am no longer able to access it. How can i reset my icloud ID without losing all of my pictures and more importantly contacts? I have created a new ID but i cannot seem to use it until I delete the old account

You need to use the old ID and password to delete the iCloud account. After you delete the old account, you can sign in with the new ID in iCloud.
Have you seen this.
http://support.apple.com/kb/HT5796
iCloud
iOS 6 and later: Go to Settings > iCloud.
If you signed out before changing your Apple ID, enter your current Apple ID to sign in. The data from your iCloud account will download to your device.
If you're still signed in with your previous Apple ID:
Scroll down and tap Delete Account. Depending on what iCloud options are turned on, you'll be asked to confirm that you want to delete data from your device. To confirm, tap Delete. (If you're using iOS 7 and have Find My iPhone turned on, you'll be asked to enter the password for your previous Apple ID. Enter the password, then tap Turn Off.) The data will be deleted from your device, but not from iCloud.
Enter your current Apple ID to sign in. The data from your iCloud account will download again to your device.

HT3176 How can the slow motion playback speed be adjusted on Apple TV (pause and clicking right/left)?

Similar Messages

Maybe you are looking for