HT3180 Apple TV blinks rapidly

My Apple TV started blinking rapidly in the middle of the night when the tv was off. The next day when I tried to use Apple TV, I couldn't access anything.
The screen was blank. Then finally there was a graphic of the iTunes icon with a USB connector and an arrow which I think was indicating me to connect the Apple TV box to iTunes on my computer via USB cable. The only problem is that it seem the only USB interface is like a micro USB. I thought it would apple style USB cable.Has anyone had this problem? If so how did you fix it?

That is correct, you need to use a micro usb cable and restore through iTunes
http://support.apple.com/kb/ht4367

Similar Messages

HT1551 Apple TV blinking rapidly

My apple tv unit is blinking rapidly and not responding

would you know which model it is 1, 2 or 3?
How has it been like this?
did you unplug and plug it back?

Apple TV blinking rapidly & not working

After the latest update, my Apple TV stopped working. It just blinks rapidly. Following an earlier advice thread, I plugged it into my MacBook Pro using a micro USB cord. However, iTunes does not seem to know it's connected. When I go to File-->Devices all the options are grayed out. Can anyone help? Or do I need to visit the Genius Bar (yet again)?

bad news... it's likely dead take it to Genius bar though...

HT1551 Apple TV Box light blinks rapidly and continously. What's the problem?

TThe light on my Apple TV blinks rapidly and continously and does not respond to the remote. What's the problem?

You'll need to use a micro USB cable. If you don't have one you can get one at most electronics store. If you have a gen 2 you'll need to disconnect everything from the Apple TV then hook up the cable and connect to iTunes.

MacBook Pro won't turn on after crash. Magsafe charger LED light blinking rapidly

Hi. I hope you can help me.
I have a macbook Pro 13", from september 2012, which crashed earlier today:
I was charging my iphone through USBport on my macbook (not an Apple USB-iPhone power-cable) .
My MacBook was charging through the magsafe charger (about 30% power i think).
I took the phone out to make a call, when that was done, I reconnected the phone to my mac for further charging.
My MacBook crashed instantly. I took out the USB cable, tried to turn on my mac, but nothing happened. There was no light in the magsafe LED.
The crashing has happened before, when I've been charging my phone through USB connections, but I've always been able to turn my mac back on.
This time nothing happened when I pushed the power button. It had comepletely shorted out.
BTW. Earlier today I received a "storage almost full" warning on my mac, and I was actually in the middle of cleaning that up (deleting downloads and trash files).
Typical and just my luck!
Now, a few hours later, I tried restoring SMC (shift+ctrl+alt+power), and now the charger LED is blinking rapidly (but faintly) orange.
Do you have any ideas on how to fix this? All applestores nearby are closed today, I live in Denmark.
Thank you so much in advance!
Kind regards Emilie

Try the SMC reset again:
https://support.apple.com/en-us/HT201295
Then try a NVRAM reset:
https://support.apple.com/en-us/HT204063
Then try a safe boot:
https://support.apple.com/en-us/HT201262
If no success, then you will have to take it in for service.
Ciao.

MacBook Pro won't turn on after crash. Charging LED blinking rapidly

Hi. I hope you can help me.
I have a macbook Pro 13", from september 2012, which crashed earlier today:
I was charging my iphone through USBport on my macbook (not an Apple USB-iPhone power-cable) .
My MacBook was charging through the magsafe charger (about 30% power i think).
I took the phone out to make a call, when that was done, I reconnected the phone to my mac for further charging.
My MacBook crashed instantly. I took out the USB cable, tried to turn on my mac, but nothing happened. There was no light in the magsafe LED.
The crashing has happened before, when I've been charging my phone through USB connections, but I've always been able to turn my mac back on.
This time nothing happened when I pushed the power button. It had comepletely shorted out.
BTW. Earlier today I received a "storage almost full" warning on my mac, and I was actually in the middle of cleaning that up (deleting downloads and trash files).
Typical and just my luck!
Now, a few hours later, I tried restoring SMC (shift+ctrl+alt+power), and now the charger LED is blinking rapidly (but faintly) orange.
Do you have any ideas on how to fix this? All applestores nearby are closed today, I live in Denmark.
Thank you so much in advance!
Kind regards Emilie

Try the SMC reset again:
https://support.apple.com/en-us/HT201295
Then try a NVRAM reset:
https://support.apple.com/en-us/HT204063
Then try a safe boot:
https://support.apple.com/en-us/HT201262
If no success, then you will have to take it in for service.
Ciao.

IPhone 4: screen blinks rapidly and goes blank

For several days now my phone's screen will start blinking rapidly then go blank. First noticed this after disconnecting from my computer after a night of recharge. Now it happens at random times, but several times a day. I cannot restart the iPhone in this condition; the only thing that works (and it works every time) is a reset. So I can always get back up and running. But this need to reset several times a day seems odd. Any ideas?

Ten days or so back, the Apple store gave me a new iPhone 4 because my original one I stood in line for seven hours to get would simply go dark with no screen blinking. Now my new one is doing the rapid blink bit and sometimes eventually goes blank but at other times seems to keeps blinking until I can shut down and reboot. On a couple of occasions it appeared to be cycling through different apps that either were, or had recently been, open. The only common trigger event I have identified is unplugging the USB or headphones, but that is less than 50% reliable trigger event.
On the theory it might be related to an application, I have been scrupulous about updating all my apps and I have gotten rid of some that have not been updated since iOS 4 was released, but I could easily have missed some. Other than the apps, the only thing common to both iPhones is the SIM card?????
I have another appointment at the Genius Desk, but the first available slot when I made it Wednesday night is Wednesday of next week. I have just tried your reset all settings idea but I am not canceling next week's Genius Desk appointment yet. Hopefully I will be able to cancel because your "fix" worked.

TS1363 Iphone just shows the apple and blinks on and off.

Iphone just shows the apple and blinks on and off.

Hello grumpy48,
The article linked below details a number of useful troubleshooting steps that can help restore functionality to your iPhone.
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Cheers,
Allen

HT1349 I was updating to iOS 6 when my iphone froze up. apple is blinking but nothing is happening. any suggestions?

Any suggestions??? Phone locked up while updating to iSO 6. Apple is blinking but no update status bar

I had this problem while I had iOS 5.1.1 installed for many months. Fortunately I only have about 150 contacts and only about half of them duplicated. I found that my problem was the way thing were set up in Outlook. I removed all of the duplicates and corrected everything in Outlook contacts (ignoring the address book) and have not had the problem since, Hope this helps.

My Ipod classic 160 gb,is dead only blinks when plugged to cpu via usb cable reset apple logo blinks as well Help!!!

My Ipod classic 160gb is dead,It only responds when I plug it in to cpu via usb cable then the screen blinks.When I try to reset it the Apple logo appears but the apple logo blinks on and off to as long as i hold the buttons down,when i realease the reset buttons it just blinks back and fourth to the blank gray screen,it worked fine yesterday night this morning its tanked.is this unit completely dead or can something be done at home?
Thank you for your help
Ice

I wrote this long time ago, have a read and see whether it can be soloved
If a sad iPod icon or an exclamation point and folder icon appears on your iPod’s screen, or with sounds of clicking or HD whirring, it is usually the sign of a hard drive problem and you have the power to do something about it now. Your silver bullet of resolving your iPod issue – is to restore your iPod to factory settings.
http://docs.info.apple.com/article.html?artnum=60983
If you're having trouble, try these steps at different levels one at a time until the issue is resolved. These steps will often whip your iPod back into shape.
Make sure you do all the following “TRYs”
A. Try to wait 30 minutes while iPod is charging.
B. Try another FireWire or USB through Dock Connector cable.
C. Try another FireWire or USB port on your computer .
D. Try to disconnect all devices from your computer's FireWire and USB ports.
E. Try to download and install the latest version of iPod software and iTunes
http://www.apple.com/itunes/download/
For old and other versions of iPod updater for window you can get here
http://www.ipodwizard.net/showthread.php?t=7369
F. Try these five steps (known as the five Rs) and it would conquer most iPod issues.
http://www.apple.com/support/ipod/five_rs/
G. Try to put the iPod into Disk Mode if it fails to appear on the desktop
http://docs.info.apple.com/article.html?artnum=93651
If none of these steps address the issue, you may need to go to Intermediate level listed below in logical order. Check from the top of the lists to see if that is what keeping iPod from appearing on your computer in order for doing the Restore.
Intermediate Level
A. Try to connect your iPod with another computer with the iPod updater pre-installed.
B. Still can’t see your iPod, put it in Disk Mode and connect with a computer, instead of doing a Restore on iPod Updater. Go and format the iPod instead.
For Mac computer
1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
5. Eject your iPod and do a Reset
6. Open the iTunes 7 and click “Restore”
For Window computer
Go to folder “My Computer”
Hope you can see your iPod there and right click on the iPod
Choose “Format”. Ensure the settings are at “Default” and that “Quick Format” is not checked
Now select “Format”
Eject your iPod and do a Reset
Open the iTunes 7 and click “Restore”
In case you do not manage to do a “Format” on a window computer, try to use some 3rd party disk utility software, e.g.“HP USB Disk Storage Format Tool”.
http://discussions.apple.com/thread.jspa?threadID=501330&tstart=0
C. Windows users having trouble with their iPods should locate a Mac user. In many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
Tips
a. It does not matter whether the format is completed or not, the key is to erase (or partly) the corrupted firmware files on the Hard Drive of the iPod. After that, when the iPod re-connected with a computer, it will be recognized as an fresh external hard drive, it will show up on the iTunes 7.
b. It is not a difficult issue for a Mac user to find a window base computer, for a PC user, if they can’t find any Mac user, they can go to a nearest Apple Shop for a favor.
c. You may need to switch around the PC and Mac, try to do several attempts between “Format” and “Restore”
http://discussions.apple.com/thread.jspa?messageID=2364921&#2364921
Advance Level
A. Diagnostic mode solution
If you have tried trouble shooting your iPod to no avail after all the steps above, chances are your iPod has a hardware problem. The iPod's built-in Diagnostic Mode is a quick and easy way to determine if you have a "bad" iPod.
You need to restart your iPod before putting it into Diagnostic Mode. Check that your hold switch is off by sliding the switch away from the headphone jack. Toggle it on and off to be safe.
Press and hold the following combination of buttons simultaneously for approximately 10 seconds to reset the iPod.
iPod 1G to 3G: "Menu" and "Play/Pause"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Menu" and "Select"
The Apple logo will appear and you should feel the hard drive spinning up. Press and hold the following sequence of buttons:
iPod 1G to 3G: "REW", "FFW" and "Select"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Back" and "Select"
You will hear an audible chirp sound (3G models and higher) and the Apple logo should appear backwards. You are now in Diagnostic Mode. Navigate the list of tests using "REW" and "FFW". The scroll wheel will not function while in diagnostic mode. For further details on Diagnostic mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/
Try to do the 5in1, HDD R/W and HDD scan tests. Some successful cases have been reported after the running the few tests under the Diagnostic mode. In case it does not work in your case, and the scan tests reports show some errors then it proves your iPod has a hardware problem and it needs a repairing service.
B. Format your iPod with a start disk
I have not tried this solution myself, I heard that there were few successful cases that the users managed to get their iPod (you must put your iPod in disk mode before connecting with a computer) mounted by the computer, which was booted by a system startup disk. For Mac, you can use the Disk Utility (on the Tiger OS system disk), for PC user, you can use the window OS system disk. Try to find a way to reformat your iPod, again it does not matter which format (FAT32, NTFS or HFS+) you choose, the key is to erase the corrupted system files on the iPod. Then eject your iPod and do a Reset to switch out from Disk Mode. Reboot your computer at the normal way, connect your iPod back with it, open the iPod updater, and hopefully your iPod will appear there for the Restore.
If none of these steps address the issue, your iPod may need to be repaired.
Consider setting up a mail-in repair for your iPod http://depot.info.apple.com/ipod/
Or visit your local Apple Retail Store http://www.apple.com/retail/
In case your iPod is no longer covered by the warranty and you want to find a second repairing company, you can try iPodResQ or ifixit at your own risk
http://www.ipodresq.com/index.php
http://www.ifixit.com/
Just in case that you are at the following situation
Your iPod warranty is expired
You don’t want to pay any service charges
You are prepared to buy a new one
You can’t accept the re-sell value of your broken iPod
Rather than leave your iPod as paper-weight or throw it away.
You can try the following, but again, only do it as your last resort and at your own risk.
Warning !!!! – It may or may not manage to solve your problem, and with a risk that you may further damage your iPod, which end up as an expensive paper weight or you need to pay more higher repairing cost. Therefore, please re-consider again whether you want to try the next level
Last Resort Level
1. . Disconnecting the Hard Drive and battery inside the iPod – Warning !! Your iPod warranty will be waived once you open the iPod.
In Hong Kong there are some electronic shops offering an iPod service for Sad iPod, the first thing they do is to open up the iPod’s case and disconnecting the battery and the Hard Drive from the main board of the iPod. Wait for 5-10 minutes and reconnecting them back. The reason behind which I can think of is to do a fully reset of a processor of the iPod. In case you want do it itself and you believe that you are good on fixing the electronics devices and have experience to deal with small bits of electronic parts, then you can read the following of how to open the iPod case for battery and HDD replacement (with Quicktimes)
http://eshop.macsales.com/tech_center/index.cfm?page=Video/directory.html
2.Press the reset button on the Hard Drive inside the iPod – Suggestion from Kill8joy
http://discussions.apple.com/thread.jspa?messageID=2438774#2438774
Have I tried these myself? No, I am afraid to do it myself as I am squeamish about tinkering inside electronic devices, I have few experiences that either I broke the parts (which are normally tiny or fragile) or failed to put the parts back to the main case. Therefore, I agree with suggestion to have it fixed by a Pro.
2. Do a search on Google and some topics on this discussion forum about “Sad iPod”
Exclamation point and folder and nothing else
Spank your iPod
http://www.youtube.com/watch?v=3ljPhrFUaOY
http://discussions.apple.com/thread.jspa?messageID=3597173#3597173
Exclamation point and folder and nothing else
http://discussions.apple.com/thread.jspa?messageID=2831962#2831962
What should I do with my iPod? Send it or keep it?
http://discussions.apple.com/thread.jspa?threadID=469080&tstart=0
Strange error on iPod (probably death)
http://discussions.apple.com/thread.jspa?threadID=435160&start=0&tstart=0
Sad Face on iPod for no apparent reason
http://discussions.apple.com/thread.jspa?threadID=336342&start=0&tstart=0
Meeting the Sad iPod icon
http://askpang.typepad.com/relevant_history/2004/11/meeting_the_sad.html#comment -10519524
Sad faced iPod, but my computer won’t recognize it?
http://discussions.apple.com/thread.jspa?messageID=2236095#2236095
iPod Photo: unhappy icon + warranty question
http://discussions.apple.com/thread.jspa?messageID=2233746#2233746
4th Gen iPod Users - are we all having the same problem?
http://discussions.apple.com/message.jspa?messageID=2235623#2235623
Low Battery, and clicking sounds
http://discussions.apple.com/thread.jspa?messageID=2237714#2237714
Sad faced iPod, but my computer won’t recognize it
http://discussions.apple.com/thread.jspa?messageID=2242018#2242018
Sad iPod solution
http://discussions.apple.com/thread.jspa?threadID=412033&tstart=0
Re: try to restore ipod and it says "can't mount ipod"
http://discussions.apple.com/thread.jspa?threadID=443659&tstart=30
iPod making clicking noise and is frozen
http://discussions.apple.com/thread.jspa?messageID=2420150#2420150
Cant put it into disk mode
http://discussions.apple.com/thread.jspa?messageID=3786084#3786084
I think my iPod just died its final death
http://discussions.apple.com/thread.jspa?messageID=3813051
Apple logo & monochrome battery stay
http://discussions.apple.com/thread.jspa?messageID=3827167#3827167
My iPod ism’t resetting and isn’t being read by my computer
http://discussions.apple.com/thread.jspa?messageID=4489387#4489387
I am not suggesting that you should follow as well, but just read them as your reference. You are the person to make the call.
Finally, I read a fair comments from dwb, regarding of slapping the back of the iPod multiple times
Quote “This has been discussed numerous times as a 'fix'. It does work, at least for a while. In fact I remember using the same basic trick to revive Seagate and Quantam drives back in the mid to late 1980's. Why these tiny hard drives go bad I don't know - could be the actuator gets stuck in place or misaligned. Could be the platter gets stuck or the motor gets stuck. 'Stiction' was a problem for drives back in the 80's. Unfortunately the fix can cause damage to the platter so we temporarily fix one problem by creating another. But I know of two instances where a little slap onto the table revived the iPods and they are still worked a year or more later.”UnQuote

HT4623 i was updating my iphone 4 through settings but in the middle my phone switched offf n now what i can see is the apple logo blinking n i cant connect it to itunes can any1 help me?

i was updating my iphone 4 through settings but in the middle my phone switched offf n now what i can see is the apple logo blinking n i cant connect it to itunes can any1 help me?

If you have a backup of your information on your computer, I would suggest putting your phone into recovery mode, by holding down the home key and keeping it held down while you connect it by usb into your computer with itunes running. Keep the home button held down until it indicates recovery mode, and proceed with the restore.

Pls my macbook air is not booting up,when i switch it on the apple logo blinks with a question mark in it.what do i do?, pls my macbook air is not booting up,when i switch it on the apple logo blinks with a question mark in it.what do i do?

pls my macbook air is not booting up,when i switch it on the apple logo blinks with a question mark in it.what do i do?, pls my macbook air is not booting up,when i switch it on the apple logo blinks with a question mark in it.what do i do?

See here > http://support.apple.com/kb/TS2570

HT4623 help! I didn't use my ipad for about a month then now it would not turn on, just a balck screen with apple logo blinking in the middle, please help

Help me. I did not use my ipad for about a month.Now that I turned it on after trying to charge it for many hours, it just would not turn on, just a black screen with sometimes an apple logo blinking, brought it to repair shops, said they could not fix it, please help

The terms of service of the Apple Support Communities prevent us from helping anyone with a jailbroken phone.
You're on your own. Good luck.

My Apple TV downloaded as update and since then I can not access the menu. Now the only thing I get is the Apple symbol on my TV screen and the led light on the Apple TV blinks. Apple TV

the only thing I get is the Apple symbol on my TV screen and the led light on the Apple TV blinks.
Apple TV

Welcome to the Apple community.
If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Source list, and then click Restore.

HT4528 My Iphone 4s is plugged in charging after it has fully died. Instead of the apple appearing and staying constant on the screen...the apple is blinking. What does this mean and how do I get the phone to charge/turn back on.

My Iphone 4s is plugged in charging after it has fully died. Instead of the apple appearing and staying constant on the screen...the apple is blinking. What does this mean and how do I get the phone to charge/turn back on.

- Try:
iOS: Not responding or does not turn on
- Next try letting the battery fully drain. After charging for a least an hour try again
- Last, make an appointment at the Genius Bar of an Apple store, it appears you have a hardware problem.

HT3180 Apple TV blinks rapidly

Similar Messages

Maybe you are looking for