HT3180 Can't set date and time on apple tv

I cannot set date and time. Help!

It is having trouble connecting to the network. Make sure location is set correctly. DNS should be set to automatic (settings - general - network). If on wifi try ethernet. Reboot ATV and router.

Similar Messages

  • Can not set date and time on a new Apple TV

    can not set date and time in a new appletv

    Hello lfsalas55,
    You may need to verify that TCP port 123 on your router is open and available for use by your Apple TV.
    Apple TV: TCP and UDP ports and protocols used
    http://support.apple.com/kb/HT2463
    Cheers,
    Allen

  • How do I set date and time on apple tv?

    How do I set date and time on apple tv?

    Fixed the same problem, STEPS
    1. Reset your apple TV
    2.It will again stuck on that setting, ignore it by press menu
    3. Unplug ethernet wire
    4. Try to connect with wifi, it should be work with wifi connection as mine.
    5. Then you can switch back Ethernet wire after get fixed.
    Thanks. Lemme know dude if it's work.

  • How to set date and time on apple tv

    how to set date and time on apple tv

    Assuming this is not the first time you have used your Apple TV
        1.    You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
        2.    Also try restarting the router.
        3.    If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
    If this is a new Apple TV, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123.

  • I bought my apple tv in USA and use in Indonesia, but I can't set date and time.

    How to set date and time so I can Home sharing with apple tv .

    Call the shop in NYC and find out.

  • Can not set date and time

    i can't not set date and time i live in florida and i am visiting hawaii.Brought my apple tv and airport express , created my own network to watch my apple tv but unable to set date and time on my apple tv.Pleas help.

    Assuming this is not the first time you have used your Apple TV
    You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
    Also try restarting the router.
    If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
    If restoring from the Apple TV doesn't help, try restoring from iTunes using a USB cable.
    If this is a new Apple TV, in addition to trying the above, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123.

  • HT1595 setting date and time on apple tv

    Cannot set network date and time using apple tv

    Welcome to the Apple Community.
    Assuming this is not the first time you have used your Apple TV
    You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
    Also try restarting the router. (Also try removing it’s power cord for at least 30 seconds)
    If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
    If restoring from the Apple TV doesn't help, try restoring from iTunes using a USB cable.
    If this is a new Apple TV, in addition to trying the above, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123.

  • Can't set date and time automatically thru Airport Extreme

    We have an Airport Extreme that serves as the router for our home network. No computer using the Airport (wirelessly or via ethernet) can set it's date and time automatically. If I bypass the Airport and hook a computer directly to the ISP's modem via ethernet, date and time works fine. The Airport is up to date (v7.4.2) This has been a problem for quite a while now and it doesn't matter what OS is used (current is 10.6). I don't have any firewalls set up that I know of.
    Any help or advice would be greatly appreciated.
    dhf

    +No computer using the Airport (wirelessly or via ethernet) can set it's date and time automatically.+
    It's done with AirPort Utility, not your computer.
    Macintosh HD > Applications > Utilities > AirPort Utility
    Click Manual Setup
    Then click the Base Station tab below the icons
    There is a check box +Set Time Automatically+ and choose a region and Time Zone
    Click Update to save your changes

  • System Preferences can't set date and time and other odd behaviour

    I have a 2008 Macbook Air, which is beginning to show signs of age, but now appears to have taken on a terminal problem.  I can't set the date and time in the system preferences, even when connected to the internet - the pane just comes up as faded out and I am unable to do anything. The problem started after I accidentally allowed the battery to run down without having shut down the computer and it automatically assumed a date of 1 Jan 2001. I am unable to perform any updates on the machine until the issue is resolved, according to software update.
    Other strange things that have happened are that the trackpad no longer responds to the 'tap to click' function or 'two finger' click. In system preferences, I cannot edit energy saver, network (advanced) or account settings - attempting to do so brings up more faded panels or an error message after failure to load.
    Has anyone seen similiar behaviour on their mac or have suggestions as how I might resolve the problem?
    Thanks!

    If this is recent, what has changed since the last time D&T worked correctly?
    I see that your Question has languished for some period of time without response. You have posted your issue in Using Apple Support Communities whose topic is 'How to use this forum software's interface, features and/or how to find what you wish'. It is a relatively low traffic and inappropriate forum for your problem. I will ask our Hosts to move it to " Using iPhone " where it may get a more rapid response from your fellow users.
    ÇÇÇ

  • Can't set date and time, stuck on that screen. Also don't have ANY apps at all.

    Whats up Apple? My Apple TV is only a few months old. Can't set the date and time and now have ZERO apps. All that shows is the "Computer" and "Settings" after staring at that spinning wheel for an hour and finally clicking menu.

    Assuming this is not the first time you have used your Apple TV
    You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
    Also try restarting the router.
    If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
    If restoring from the Apple TV doesn't help, try restoring from iTunes using a USB cable.
    If this is a new Apple TV, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123.

  • I lose my internet connection on my ATV2 with the last update the network works but the ATV´2 can´t set Date and Time

    Since friday I update my ATV 2 trough my Mac on that day, the device show me that it is connect to the network, all my anothers devices are working well with my wifi connection, I made some test, enter to my router config as another forums talkking about of the same trouble with the ATV, I´m so fustated than after made everythig that is possible to do I can´t fix the trouble, I can´t don´t back to the previus ATV version, when I try to enter to the Home Sharing or Itunes store the message are that I not conected to the internet and I have to setup date and time, I check the data and time on my dlink router and everything are ok there, ANY IDEA I´M TIRED to try to fix it all the day, reading blog making resets and everything possible, maybe I jump some stage.
    By the way the Aiplay is working on my network.
    Best Regards

    Ok thanks again
    Yes I try Ethernet cable from the ATV to the router
    I check the signal using the istumbler and the internet speed that I have on my anothere devices likes iphone, Ipad and my MacBook Pro the levelo istrubler screen is high.
    This is something that I doesn´t ry how I can configurate the port 123 on my router that is a DLINK, I set the time on my router tool page 192.168.0.1 and unchek the firewall as recomended on anothers old post.

  • HT3180 setting date and time - my apple tv get stuck and says it needs to set the network date and time.  Does anyone know how to do this?

    My apple tv gets stuck and says it need to set the date and time on the network.  Does anyone know how to do this?

    I was able to get my Apple TV working again by downgrading the firmware following the instructions in this message:
    https://discussions.apple.com/message/20008613#20008613
    In case that message disappears, here's my translation:
    1. Connect your Apple TV to your computer via USB. Don't plug in the power cable.
    2. Download the older 5.0.2 firmware from Apple here:
    5.0.2 (Apple TV 2): AppleTV2,1_5.0.2_9B830_Restore.ipsw
    5.0.2 (Apple TV 3): AppleTV3,1_5.0.2_9B830_Restore.ipsw
    3. Open iTunes and select the Apple TV. Hold down the option key and press the restore button at the same time.
    4. In the dialog that opens select the firmware that you downloaded.
    5. The restore process will take a few minutes. Once it's done plug your Apple TV back into your TV. If the date and time message persists just press the menu button to skip it. This got mine working again.

  • Is there a way to force time can only be set to "Set date and time automatically"?

    I am using OS X 10.9 .5 , and here is what I want to do.
    When you click "Open Date & Time Preference", you will find an option that states "Set date and time automatically". And of course you can chose not to do that, and adjust the time.
    But can you remove that option? So your OS X is forced to chose the mode "Set date and time automatically" no matter what you do? (aka you can't adjust the time by yourself now.)
    Is that possible? Is there an app that can achieve this goal or can you do that at Terminal?
    Thanks in advance.

    There's a similar setting in iPhoto preferences (in iLife '08 versions and later), or in Image Capture preferences (if you're using iLife '06 or earlier). Check those settings as well.

  • After a power outage Apple TV can't find date and time - just keeps spinning on that screen. Tried powering off Apple TV, the computer, and the router. Tried to restart Apple TV. Tried to restore Apple TV, but it got stuck again setting time/date.

    After a power outage Apple TV can't find date and time - just keeps spinning on that screen. Tried powering off Apple TV, the computer, and the router. Tried to restart Apple TV. Tried to restore Apple TV, but it got stuck again setting time/date.

    Welcome to the Apple Community.
    Along with the things you have tried, some have had success setting the location to the US.

  • Just updated to new iOS 6 on iPhone 3G. Get 'can't connect to iTunes' message. Tried the setting date and time trick but still no success. Any suggestions for 3G iPhone?

    Just updated to new iOS 6 on iPhone 3G. Get 'can't connect to iTunes' message. Tried the setting date and time trick but still no success. Any suggestions for 3G iPhone?

    also must mention i have never had trouble that i couldn't fix on itunes but all of this has started since i have been using icloud for basic backups hope this helps solve problem

Maybe you are looking for