HT3180 Hi, I've tried to re start mt apple TV after relocating. I get the Apple logo on power up & then it searches for time & date. After a few minutes of doing this, the screen goes blank. I have no menu screen - nothing??
I have no idea what to do? I can't reset my Apple TV because I cant access settings. Mr remote is blinking three times indicating it's not paired, so I can't reset it that way!
1. Power on and Apple Logo aphears.
2. TV trys to find time and date ( not the new start up language, location etc)
3. Screen on TV is blank
4. Try remote and Apple TV just blinks three times.
WIFI Network is pefect & pairs with all my IT
Please help
Obviously, your network isn't perfect.
Assuming this is not the first time you have used your Apple TV
You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
Also try restarting the router. (Also try removing it’s power cord for at least 30 seconds)
If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
If restoring from the Apple TV doesn't help, try restoring from iTunes using a USB cable.
If this is a new Apple TV, in addition to trying the above, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123.
Similar Messages
-
Font substitution for Times New Roman? Why is Adobe doing this?
I'm using Adobe Acrobat Pro version 9.2 to read pdfs created by a number of different authors. I'm running Windows 7 64 bit OS. These are NOT pdfs I have created. Some of these pdfs display an incorrect font substitution for Times New Roman and I can't figure out why. In the File/Properties dialog the font property comes up as Times New Roman, True Type, ANSI encoding (Times New Roman has spaces between the words). This font is not embedded. Adobe Sans MM is the font that my Adobe 9.2 substitutes for it, even though I have a true type Times New Roman already installed in Windows.I have installed all updates for both Acrobat and for Windows. If I select the text touch up tool to look at the text, a box comes up saying that the original font is not available and a substitute font will be used. When I look at the drop down box for fonts in Adobe, I see among all of the various fonts available, TimesNewRoman without spaces, but no Times New Roman with spaces. Does this matter?
When I go to my Windows Control Panel Fonts screen, I see a Times New Roman truetype font available (with spaces, the same as the font the document is requesting). It says OpenType Layout, Digitally Signed, TrueTyepe Outliers. I use it all the time.
What is required to get Adobe 9 to display this font? It looks like the document is asking for the font I have available on the system and Adobe 9 Pro just isn't identifying it. These same pdfs display just fine on Adobe Acrobat Standard 7.0 on another Windows 7 64 bit OS machine. Is there a separate font library that Adobe has independent of the Windows font library and I simply don't have a complete set of fonts for my version? I don't have the option to have the authors recreate their documents. And they display just fine on an older version of Adobe on a different machine.
UPDATE: Adobe 9 required more than one update. I did the 300 mb update and the problem described above was still there. I checked again just now for updates, and there was another one. This one, whatever it was, fixed the font substitution problem. So the moral of the story is... update, then update again, and keep doing it until there are no more. Adobe doesn't say "there are xx updates available." You just have to keep on asking for them until it says 'no'.The font Radioactive is the problem. It has an incorrect internal name that conflicts with Times New Roman. Delete Radioactive and ban it from any Mac you use.
-
when i try and sync my itunes with my apple tv (1st gen) it crashes my wi-fi connection. please can anyone help on this? I do remember it saying at some point that something shared the same IP address with something else .... but i am rather clueless. Both me and my husband have macs, iphones and apple tv - but it is my itunes account that the apple tv uses if that is any help.
Here's the solution for the T-string error.
http://iweb.dailynews.webege.com/PHP_parse_error.html -
iPad--third generation shuts off antenna/hotspot after a few minutes of non-use.
Happens in 3G and LTE VZ environment.
Turning hotspot off and on getsw things working again.
Does Apple have antenna on a timer so it shuts off after a few minutes?
Does this happen on Mini and Retina as well?
FLAGSTAFFLARFixed!
Two things together have restored connectivity.
1. I changed the name under Settings > General > About > Name from My Name's iPad to iPad of My Name. I read somewhere that iOS 7.0.1 or 7.0.2 (I forget which) sometimes had issues with apostrophes here. Easy enough to test.
2. I then reset (again) the APN settings under Settings > Cellular Data > APN Settings > Personal Hotspot and reentered our provider's info (APN, Username, Password) there.
I don't know WHY it worked, but the personal hotspot is now happily sharing (again) internet connectivity with my MacBook Pro. -
When i enter a preset the image goes blank
when i enter a preset the image goes blank
when i try any adjustment nothing happens to the imageThere are several possible causes for the Black Screen issue
1. Permissions in the Library: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair permissions.
2. Minor Database corruption: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
3. A Damaged Photo: Select one of the affected photos in the iPhoto Window and right click on it. From the resulting menu select 'Show File (or 'Show Original File' if that's available). (On iPhoto 11 this option is under the File -> Reveal in Finder.) Will the file open in Preview? If not then the file is damaged. Time to restore from your back up.
4. A corrupted iPhoto Cache: Trash the com.apple.iPhoto folder from HD/Users/Your Name/Library/ Caches...
5. A corrupted preference file: Trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
If none of these help:
As a Test:
Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there? -
When turned on our Macbook flashes a folder with a question mark in the center screen, then it shuts down after a few minutes. Doea anyone have any ideas how to boot the computer back up?
CheersThat folder with the question mark icon means that the MacBook can't find the boot directory. That can either mean it can't find the hard drive or the Operating System data on the hard drive is somehow corrupted.
Put your install DVD into the optical drive and reboot. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option key until the Install Disk shows up). That will force your MacBook to boot from the install DVD in the optical drive.
When it does start up, you'll see a panel asking you to choose your language. Just press the Return key on yourkeyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Disk Utility and click it. When it comes up is your Hard Drive in the list on the left?
If it is then click on the Mac OS partition of your hard drive in the left handlist. Then select the First Aid Tab and run Repair Disk. The Repair Disk button won't be available until you've clicked on the Mac OS partition on your hard drive. If that repairs any problems run it again until the green OK appears and then run Repair Permissions.
If your hard drive isn’t recognized in Disk Utility then your hard drive is probably dead. -
HT1595 Why does my wifi connection is lost in apple TV after a few minutes?
I have tried giving apple tv a static ip but the connection is lost after a few minutes and does not come back. I have tried re-booting the router as well as ATV!
I have this same problem, and apple said that it has to do with the router closing the ports so you have to call whoever makes your router and have them help you port forward. I did this and it helped for a couple months, then back to the same ol' same ol'.
-
my i phone screen starts blinking and showing funny and distorted images before going blank. now it's blank,how do i get it back to normal.?
Did you already try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again? You will not lose data, but a reset can cure some glitches.
If this does not work, try to set it up as new device, explained in this article:
How to back up your data and set up as a new device
Don't use the backup afterwards, to rule out a software problem. If the camera is working again, restore from the backup. -
I keep getting the screen "An error occurred loading this content" on my Netflix now for two days. I have tried everything. Any suggestions?
Welcome to the Apple Community.
What exactly is everything, have you restarted your router. -
I have a 2007 Macbookpro and it started up with gray checkered boxes and across the screen I tried to re load OSX and it work 1 day and started again is this a hard drive problem or Video? Now as it starts to load a screen comes up saying to restart over and over again
I'd suspect this known issue:
http://support.apple.com/kb/TS2377
if you have a late 2007 MBP.
The only testing you can do at home is to attach an external monitor and see if the defects repeat on the external. If so, get to an Apple store. If the computer's video chipset fails a test the Apple Store will perform, you get a free logic board replacement. Turnaround is usually one day to one week--not bad at all.
If the defects do NOT repeat on an external monitor, then the problem is not covered by the above Repair Extension Program
The issue is heat-triggered. Be certain that you control heat once you get it fixed. Don't use the computer in your lap without a lapboard; don't block the vents under the display hinge; don't us in clamshell mode, etc. -
I am trying to retrieve my photos from my I phone 4s because the screen is smashed. The pc that I use is windows not an apple computer. Can anyone give me step by step instructions how I can get my photos? Also, I don't have icloud
If the iPhone is still working and the photos are in the Camera Roll (i.e., taken on the iPhone) then, when you connect the iPhone to your PC, it should be recognized as a Camera and Windows should start AutoPlay.
See this http://windows.microsoft.com/en-us/windows/get-pictures-camera-computer#1TC=wind ows-7 -
I have no need to keep huge, old Messages conversations, so I recently set the Message History to delete messages after 30 days. Since doing this, however, I have noticed that the Messages app has become fairly buggy. Sometimes I'll open the app and it will look like there's no conversations, and the app prompts me to send a new message. Sometimes, I'll open the app to reply to an incoming message and my response will hang at 90% sent and then when I go back to the conversation list, it displays my outgoing, as-yet-unsent response as a new message, complete with little blue new message marker. The only way I have found to temporarily resolve these issues is to restart the phone. What's going on here?
Hi,
According to your description, I understand that you need to apply a rule to delete messages older than 30 days for all mailboxes in your environment. Is it right? If I misunderstand, please point it out.
As all above suggestions, we can use retention tags and retention policies in Exchange 2013 to achieve it. To apply it, we can try the following steps:
1. Login to Exchange Admin Center(EAC) in Exchange 2013 as an administrator.
2. Click compliance management > retention tags.
3. Click New Tag > applied automatically to entire mailbox(default).
4. Edit the Name, Retention action and Retention period(30 days), then
Save it.
5. Click Retention Policies tab > New.
6. Edit Name and add the Retention tags you created a moment ago. And
Save it.
7. Navigate to Recipients > Mailboxes.
8. In the list view, use the Shift or Ctrl keys to select multiple mailboxes.
9. In the details pane, click More options.
10. Under Retention Policy, click Update.
11. In Bulk Assign Retention Policy, select the retention policy you created to apply to the mailboxes, and then click
Save.
Hope it helps.
Thanks,
Winnie Liang
TechNet Community Support -
My Late 2009 Model 10,1 running 10.8.5 frequently acts as though I have pushed the F11 button, but I haven't. The cables are not loose. Gently touching the mouse will get the screen back, but often it immediately goes back to the F11 mode. Is this a hardware or software issue? How can it be fixed?
I called Apple. The problem was caused by settings in Mission Control. After changing all 4 of the Hot Keys (if that's the proper term) shown in the bottom half of the Mission Control window in System Preferences to "-" by clicking on the drop down menus, the problem went away. Apple's help was excellent!
-
When I am trying to import pictures from my iphone to PC, I get the message'No new pictures of videos were found on this device'. There are lots of pictures which i can see on the iphone. I have a 4S. Is there a way to get around that?
It sounds like you are using an application to import. You can do it manually.
Start > Computer (on the right) > scroll to the bottom and you will see your iPhone under Portable Devices > Open it and you will see a Drive, open that and there will be a DCIM folder. That is where your photos will be (There may be other folders each holding photos). -
My computer will not start up. It powers up, I get the gray screen with the apple, then the loading progress bar starts loading to about 25% the the screen goes black. what can I try to get my computer up and running?
Carolyn Samit wrote:
iMac, Mac OS X (10.7.1)
Use Command + R for Lion Recovery
Try restarting, when you hear the startup tone hold down the Option key. Then choose the Recovery Partition.
Maybe you are looking for
-
Tutorial: Virtual Numpad on laptops that don't have one built-in
Hi all! After getting so much good help from the people on Arch forums, I thought it was time to give back. You remember how on older laptops, you would hit numLock and a portion of your keyboard would become a numpad? (specifically, the 789uiojklm k
-
I have realised over time I have created multiple accounts. I have bought music on my Iphone and am not able to locate the account that I made most of my purchases on. I have bank statements on the purchases but don't know how to contact someone in
-
Can't get Express to join established Extreme network
My Extreme base works fine connected via ethernet to an eMac without an AirPort card. My roaming MacBook finds the network, and everything is just swell. Both computers are running 10.4.10. THE PROBLEM OCCURS when I try to set up a wireless delivery
-
Flex 2.0 reliability in a stressed environment
Greetings, I am totally new to Flex 2.0 but am really amazed by the possibilities it offers for developpers but I wonder about its stability, or reliability, under heavy load. I recently had to start looking for Flex 2.0 for a POS (point-of-sale) app
-
Sending emails in mail does not work
I have a problem with Apple Mail i can receive Emails but i can't send emails it says: cannot send message using smtp.live.com server. the server works on my iPhone. so is there a diffrent server for Mail on the Mac? it is a hotmail account POP3 serv