HT3180 I Have No Power or no red light, has any one else had this problem.
I have no power or no red light, has anyone else had this problem?
I have noted in several posts as have a few of the others here,, Bob Timmons being one who has tested it, that the new one was no better than the old ones. I bought a new AEBS 5th Gen to test against all my old TC's up to Gen 3.. IMHO they are all about the same.. and my old Thomson G wireless router beats them handsomely at the other end of the house. ie the range is to be frank, pathetic. I don't have a Mac laptop to test with.. so just concluded it needs the exact match to get results like anandtech article..
I would do the following.
1. Download and use 5.6 utility.. you are lucky you are still on Lion as ML no longer can use v5 utility.
http://support.apple.com/kb/DL1482
2. Set wireless names to short, no spaces, pure alphanumeric. Set a different name to 5ghz. Its range is always short.. so don't expect too much. Make sure the output is set to 100%.. and the region is correct.
3. Lock the wireless channel for 2.4ghz.. test the available channels.. in Nepal I have no idea what is allowed.. but 1, 6, 11 are the main non-overlapping channels for most of the world. Power output maybe different though and the TP-Link might be set to higher output country.. apple do not allow that. Check what country the tp-link is set to.
4. The location of the TC must be as good as possible.. The antennas are around the 3 sides but the most important is in front.. try to place the TC so the laptop is facing the front of the TC, with nothing in between.
I am pretty sure you are never going to get the output any higher than it is now.. I still use the old wireless G Thomson signal in the other end of the house. And even running 3 TC at once (when I am repairing power supplies.. makes no difference.. they are all invisible).
Either return the TC as unsuitable.. or simply use it as a backup.
The TP-Link can be used in wan bypass to provide wireless.. just turn off the TC wireless.
Similar Messages
-
Ihave just upgrade my imac to the new os x maverick and now its very slow to open everything.
Have any one else had these issuesMacKeeper is utter garbage!!!!
Before even attempting an OS X upgrade, completely remove this serious "crapware" from your system!!!!!
If you do not believe me, do a search in these support forums for MacKeeper and you can see for yourself!
Get rid of it!
See if your system speeds up after completely ridding your system of everything connected to MacKeeper.
Please, start a new thread and do not hijack a thread of another user posting!
Why are you so concerned about "cleaning out" your Mac?
How full is your Mac's hard drive?
How much RAM is installed in your Mac?
Download and install and run Etrecheck.
Copy and paste its information iinto a new posting so that we can see all the necessary details of your Mac system so we may begin to address your Mac issues.
http://www.etresoft.com/etrecheck
Good Luck! -
My brand new MacBook Pro retina display not charging the battery any more after 3 weeks...no green or red Led. Any one now about this problem? Thanks
Either the power brick is damaged, or the charging circuit is on the blink, or both. Either way, a trip to the Apple Store or the Apple Authorized Service Provider is in order, as this ain't no bargain basement toy.
In the meantime, can attempt an SMC Reset to see if it helps. -
Is anyone having this problem?? When I update the apps on my i-phone 4, it updates and re-installs apps I have deleted from the device. Is there a solution?
If your are syncing from a computer and iTunes you can go to the apps section and select which apps you want to go back onto your device when you sync it.
-
My ipod nano gen 5, will not be indentifed by the new version of iTunes. Is anyone else having this problem?
Yes - I downoaded an album to my laptop and can" "sync" the album to my nano.
-
After upgrading to iOs 5.1 the AV composite cable don't work, appear a message: the device is not compatible with iPad2, anyone else had this problem or have a solution for it?
Try a reset. Press & hold the Power and Home buttons together for 10+ seconds, ignoring the red power-off slider, until you see the Apple logo. It is safe to do, there should be no content loss. It is the same as rebooting your computer.
If that does not work, restore the iPad to the factory settings. -
i no longer have video capability on my ipad mini after downloading ios7. has anyone else had this problem?
Describe the problem. Won't show videos? Won't take videos? Or other?
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Cheers, Tom -
I have an iphone 4. Recently I have issues with certain apps closing immediately once they are opened.(ie Email). Tried re-booting entire phone and still having issues. Any one else having this issue or know a fix for it?
Delete background Apps from memory and then Reset.
To Delete background Apps, double click Home button, in the bar at bottom, hold down on an App Icon until the minus sign appears, tap all the minus signs, until all background Apps are cleared from memory. Then Reset, hold both Home and Power buttons until the iPhone begins to restart itself, ignor the 'slide to power off' let the iPhone restart itself. Usually takes about 10 seconds of holding both buttons. -
I have the latest version of Pages 5.2 but I keep getting a message saying I must download the newest version to open my file, has anyone else had this problem?
You have 2 versions of Pages on your Mac.
Pages 5.2 is in your Applications folder.
Pages '09/'08 is in your Applications/iWork folder.
You are alternately opening the wrong versions.
Pages '09/'08 can not open Pages 5 files and you will get the warning that you need a newer version.
Pages 5.01 can not open Pages 5.2 files and you will get the warning that you need a newer version.
Pages 5.2 can open Pages '09 files but may damage/alter them. It can not open Pages '08 files at all.
Once opened and saved in Pages 5 the Pages '09 files can not be opened in Pages '09.
Once opened and saved in Pages 5.2 files can not be opened in Pages 5.
Anything that is saved to iCloud is also converted to Pages 5 files.
All Pages files no matter what version and incompatibility have the same extension .pages.
Pages 5 files are now only compatible with themselves on a very restricted set of hardware, software and Operating Systems and will not transfer correctly on any other server software than iCloud.
Apple has removed over 95 features from Pages 5 and added many bugs:
http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
Archive/trash Pages 5, after exporting all Pages 5 files to Pages '09 or Word .docx, and rate/review it in the App Store, then get back to work.
Peter -
When I try to sync my iPod touch it comes up with a message saying "iTunes was unable to load data class information from Sync Services. Reconnect or try again later". I have reconnected and tried again later numerous times and it hasn't worked! Has anybody else had this problem and knows how to fix it??? Help me!
Try here:
iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert
If not successful see the previous discussion on the right side of this page with the green checkmark. -
Hi,
my phone is in recovery mode and wont restore. instead i receive the error message 1604. i have used alternative usb cables and am at a loss. has anyone else had this problem?Hi there hstear93,
You may find the information in the article below helpful.
iOS: Not responding or does not turn on
http://support.apple.com/kb/ts3281
-Griff W. -
I updated the software on my 2009 MBP to Mountain Lion. Since then, my iPhoto has been unable to open my photo library. I have updated iPhoto, and still no luck. Any ideas for fixing this problem?
Welcome to the Apple Support Communities
Do you see any message when you open iPhoto? Try to open iPhoto holding Option key and select the library -
Hi guys. After updating to 7.0.6 my iphone 5s is no longer showing in itunes. Strangley it is recognised by my PC (windows 8) when I click on my computer. I have tried reinstalling itunes and making sure the drivers are up to date, but this has made no difference. Has anyone else had this problem or does anyone have any advice? Thanks
Device not detected in iTunes for Windows
-
I just updated to iTunes 11. This version will not allow me to change info on any songs. Have always use "command i" with previous versions. Anyone else experiencing this problem? A solution?
Hey! I had the same problem you did just today when I was trying to get my second iPhone to sync. What you need to do with music or anything extra that you doing you have to creat a second playlist or picture or anything that you would like to use, so that you can add to the second device that you are going to be using. I am not sure if that will help but it helped me out a lot!! Good luck!
-
I am trying to download library books onto my Nook reader and keep receiving the message that the book isn't authorized to download. Have not downloaded a book in several months but haven't had this problem in the past. Help?
same problem for me. I am using abe edition 3 as I don't think 4 can be used with kobo. Book has been downloaded to kobo but it can't be read as it is not authorised.Help please
Maybe you are looking for
-
Hi Forum, can someone tell me what could cause this error while installing GW 2014.1 (not HP1) on WIN 8: "Failed extract file "DLL.ini" from the binary table" Thanks, Pascal
-
Best practice for setting an environment variable used during NW AS startup
We have installed some code which is running in both the ABAP and JAVA environment, and some functionality of this code is determined by the setting of operating system environment variables. We have therefore changed the .sapenv_<host>.csh and .sape
-
MC74 : how transfer SOP to PIR for a specific mrp area
Dear guru , i want to transfer Planning Data of a SOP Version for a single material to Demand Management. The copy to Demand is run directly into the plant of the SOP Version. I manage MRP Area. How can I transfer directly SOP to PIR for a specific m
-
Error in Merge the Masthead and the Tool Area
Hi experts, I create a new par component with this tutorial: How to Merge the Masthead and the Tool Area in SAP Enterprise Portal --> http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/f058ef9c-b211-2a10-4fad-8b88d5a1fe74 but i have a problem, w
-
I am using Muse to do all of my editing and updating on my site which is being hosted on BC. I have started creating my emails in DW and I need to know how to upload the entire file with the images to the BC site for my newsletter campaigns. How do I