HT3180 I turned on my apple tv and there before me on the screen was a picture of the apple tv with the micro usb and power lead in with the usb side pointing to the blue itunes logo! I think its telling me that it needs some kind of update ! help
I have tried reseting it through itunes ! But it does not recognise the apple tv and the itunes hasnt got any apple tv tabs? help
It is telling you to restore by connecting to iTunes. Did you follow the steps exactly?
Unplug all cables, then connect micro usb. Make sure to connect directly to the computer and not a leyboard port or USB hub.
http://support.apple.com/kb/HT4367?viewlocale=en_US&locale=en_US
Similar Messages
-
am trying to redeem an itunes gift card but its telling me that the ipod is from another state and that i can't redeem the card????
The iPod is from another state? Can you give us anymore details?
Be sure you are using the correct code > iTunes Store: Invalid, inactive, or illegible codes -
I tried to create a US account, but i need a credit card with an american address and i dont have one. This has only been happening in the last week or so. I am still clicking the app store button on my ipad. Help please.
Is the iTunes app on your computer opening in the Canadian iTunes Store? Go to the bottom of the iTunes Store page and check the circular flag icon in the right corner. If it is not the Canadian flag click it and change the country. Then log into your Canadian iTunes account and sync your iPad.
Hopefully it is now using the Canadian iTunes Store. -
im trying to unlock a friends ipad for her because her step daughter doesnt want to give the password to her how do i go about in restoring it without using the password in order for me to do the process
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
my camera has not been working for a while and i don't know how to reinstall it i have tried shutting it down and restarting it but nothing works
Hi Das0766.
You appear to be running Tiger and this is quite the wrong column to pose your questions. Your system is not intel based.
Try posting in Tiger where you are more likely to meet up with people who know about your OS. -
i was doing the software update to my iphone 4s and my phone died. i pluged it in and when it turned on after the white apple the screen showes the blue itunes logo over the word itunes over an image of a charger. i tried reseting my phone. i cant figure out how to get past this point
See Here > http://support.apple.com/kb/HT1808
-
I tried to update my iPod 4th generation while it was charging and when I came back to check on it the screen was red and it wouldnt go off, and my ipod wasnt charging like it was supposed to. I found out how to get the color of the screen off but my ipod always has the low battery thing and when I charge it sometimes the screen turns blue or the apple logo comes up bright and then it gets dim and stays there. My ipod wont turn on, and I really want it to work again. Help me please! Also, I noticed my ipod battery hasnt been lasting long as it should efore this happened.
Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. -
Hi there,
Can someone please help. My IPhoneS stopped working right after I did the latest update which was yesterday. Now, the phone does not work at all. When turned on, the screen shows a picture of USB cable pointing to the ITunes logo. I have tried just about everything, and cannot get it working. It's like it is frozon. My ITunes does not recognize my device. Cannot dial out either. I desperately need to get it working. Can someone please help me.
Thanking you in advance for your help. :-)The update did not do anything.
AT&T cannot and will not do anything, they do not provide support for iPhones, Apple does.
The issue is not with the iPhone or iOS if you've reset network settings and tried forgetting the Wi-Fi Network, it is specific to the network.
Check the settings on the router, try disabling the security settings first... that will clarify the issue is not with the device but rather the Network. -
After adding the latest update to my 5c iphone, the screen was black, with the itune logo in the center, a white arrow below it point to the logo, and below that, what seemed to be a white lock, but it had a long white line reaching the bottom of the screen. I can't get the phone to start. The white apple appears and then I get the same logo, arrow, etc. What can I do to fix this? Thanks for any assistance.
i m also put passcode in my iphone...but i dont know that how i know that my passcode is crack by someone???and same as police is not interested to find out it..
i want ma iphone backkk........... -
i didn't close my mac air down properly and when i tried to use it, the screen was frozen. I turned it off and restarted it, and the grey screen with the apple logo appear and the circle just keeps spinning. Can you advise?
Try resetting the SMC
Intel-based Macs: Resetting the System Management Controller (SMC) -
When I started my Mac the screen was white with the Apple logo and power motion icon running. I attempted to turn off Mac then a message stating "Debugger called: <Button SCI>. Also "Waiting for remote debugger connection." What is my next step?
Hi , and a warm welcome to the forums!
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
If 10.7.0 or later...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
And sorry to report that OSX is more Widows like than ever, but….
If that doesn't help Reinstall the OS. -
i turned my ipod off while it was udating the software (oops) now all it shows on the screen is a picture of the cord with an arrow pointing up to itunes. please help.
What happens when your connect the iOS device to your computer and restore via iTunes.
Try DFU mode and then restore if necessary.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software -
I do have an iphone4s with me and whats happening now is that it is stuck in the "itunes logo". What i did is that i try restoring the phone with itunes but it didnt go through. The process was not successful. An error appeared and it stops the restore. PLEASE HELP
I did restore my phone last week, it went well. Today, i turned my phone off and turn it back on, now it is stuck in itunes logo and i was thinking that it needs a restore again. Once i tried restoring it, it finishes the "Extracting iPhone Software" part, but after that the error appears. PLEASE HELP ME
-
i bought a ipod touch 4th generation with cracked screen and i finally got it to turn on itunes and the ipod was making charging noises but the screen was just white i tryed updating it to ios 5.1.1 bit did nothink so i was wondering how to fix this white screen i tryed a hard reboot ( whitch i heard might work ) but did nothink if there is no sulution to fixing this is it worth buying a new screen ? thaanks
Try here:
iOS: Not responding or does not turn on
If yu can't turn it off, then let the battery fully drain. After charging for at least an hour try again.
If still not successful that indicates a hardware problem and service is required. -
TS1369 iphone showing blue itunes logo with usb cable
after copying recent purchases from iphone 4s and
updating itunes software
iphone not showing in devices in itunes but
it does showing in Windows 7.
Iphone shows blue itunes logo with usb cable.Hi there gdavis433,
You may find the troubleshooting steps in the article below helpful.
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
-Griff W.
Maybe you are looking for
-
How to add a new column in a SWITCHER PAGE
Hi, I am working on iexpense and i have to add two new fields (column) in expense line GRID in iexpense Allocation page. for that i modified the VO and added my attributes and by personalization wanted to add a new column to that ...but its not happe
-
I can't stack photos (previously in version sets) imported via "Upgrade PSE Catalog". Why not?
I am currently using LR 3.6 on a Windows 7 OS/ HP laptop. Previously, I organized my photos using PSE 9 Organizer. When I switched to LR 3, I selected the option to upgrade my PSE Catalog to bring my photos into LR. LR imported all the photos and
-
Il y a une bande grise avec marqué Album qui se place sur mon album photo. Je ne suis plus capable d'ouvrir mes photos. Comment enlever cette bande grise?
-
Super 10.50 - a J2EE toolkit supporting Weblogic 10
Acelet has released Super 10.50, supporting Weblogic 10, with Easy EJB, Easy JMS, Easy JMX, Easy Webservice and more: at http://www.acelet.com Thanks.
-
What is best way to start up to secure processes with encrypted passwords
Please redirect me if this should be in another Java forum ... I want to have 2 Java applications running on a secure server. Both contain a password in memory that needs to be kept highly secure. Also, I want each application to be able to restart t