HT3180 Uploaded new software update and all I have is a little black box with an incessant flashing white light. I have pushed menu + downarrow on the remote, unplugged for 10 seconds and stiill no change when I plug it in again ! !

Uploaded new software update and all I have is a little black box with an incessant flashing white light. I have pushed menu + downarrow on the remote, unplugged for 10 seconds and stiill no change when I plug it in again ! !

Welcome to the Apple Community.
If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Devices list, and then click Restore.
(You may already have a micro USB cable if you have a camera or other digital device)

Similar Messages

  • My iPad downloaded ios 8 and all I get is an unresponsive black screen with the logo. And when I reset it it goes to the page where it says hello in a bunch of languages then I try to configure it and my screen once again goes black. HELP!

    My iPad downloaded ios 8 and all I get is an unresponsive black screen with the logo. And when I reset it it goes to the page where it says hello in a bunch of languages then I try to configure it and my screen once again goes black. HELP!

    Hello Lesliegrande,
    Thanks for using Apple Support Communities.
    Please follow the troubleshooting in the article below to help resolve this issue where you are unable to update your iOS device.
    If you can't update or restore your iPhone, iPad, or iPod touch
    Take care,
    Alex H.

  • I want to watch a video from a site and all I see is a little blue box

    Why is it that when I'm on a site that has some video to watch (i.e. news)...all I see is a little-biddy blue box with a question mark on it where the video should be? I tap and tap but no video...what is that little blue box with a question mark on it...is my video being blocked.
    And while I'm on it...sometimes I'm on a site and I tap the "link" but it doesn't open the link up...just kinda refreshes the page and goes back to where I was...like it didn't open up at all...no extra page, no nut'n.
    Just curious,
    Thanks

    Seems like I do wait for the page to fully load but sometimes these sites have "auto-refresh" on and that may bug it up a bit...but I do remember zooming in and tapping with a good tap and all it does is refresh the page I was already on. Not a biggy since I can eventually check it on my desktop later, but was curious if I was the only one having this problem. Thanks so much.

  • HELP My font list doesn't appear in FCP X.  All I see is a big black box with no fonts.

    When I go to change my font on a title in FCP X - all I get is a big translucent black box with no listing of my fonts.  As I move my mouse within the empty black box, the fonts do appear to change in the title, but I can't see the fonts's names etc.  Is anyone experiencing this problem???  ANy way to fix this????

    Have you tried trashing your preferences?
    Unexplained faults like this can often be fixed by clearing out FCP X's preferences (for some reason, they get knotted up from time to time).
    Download Digital Rebellion's Preference Manager (free, simple to use, and perfectly safe, both to download and use).
    http://www.digitalrebellion.com/prefman/
    With Preference Manager, you can backup the Prefs when FCP X (or any of the Apple Professional Applications) are working normally. Then when either of the applications are acting strangely, Trash the Preferences, then Restore from your backups (just a mouse-click).
    If you trash the prefs and don't restore them, you will need to manually restore all your FCP X settings again, so it's a great idea to backup Preferences from time to time when FCP X is working well, then your backups are up to date.
    Doesn't fix every problem, but it fixes a lot.
    Andy

  • How to tell the PO is for re-approve after price change when release PO

    Hi,
    When doing PO approval (release) with transaction code ME28, we want to know whether the PO is a newly created PO for approval or it is for Re-approve due to changes (on price, quantity etc). We want to be able to differential the Re-approve PO in ME28 screen without drill down to the PO changes history screen. Is that possible?
    best rgds

    hi
    from ME28  goto  environmentdisplay documentit will take u to po
    in Po from menuenvironmentheader changes
    here u can see release history
    Vishal...

  • Switched on my imac 24inch intel based and all I get on screen is a folder with question mark flashing,I had backup on external hard drive but when I try to reinstall it can not find my mac hard drive

    Hi when I started my intel based imac this morning all I am getting is a folder with question mark in the middle flashing,I have external hard drive with backup,but when run disc utilities it does not show my mac hard drive.hope someone can help.(it's running mountain lion, well it was)

    Try starting up your Mac while holding down the Option key. That should prompt the Startup Manager window where you can select the startup disk then click Restart.
    The question mark folder indicates your Mac cannot find a system folder to boot from.
    A flashing question mark appears when you start your Mac

  • I have a Text control string box with some initial text. I would like to highlight old text with click of mouse and type in new data from keyboard

    I have a text control string box with some initial text (says: Please enter Name). I would like the operator to click on the text control box and have it automatically highlight so that when new data is typed in the old erases (all at once) and the new data is now in the text box.
    I tried using the "Text.Selection" property node and when I run it and put the mouse inside the text box the initial text is highlighted and if I press "delete" on the keyboard or if I start to type in new data the initial data does delete but once I start to type new characters they erase each other. For example if I want to type in “Willi
    am” I type the “W” and then the “I” but the “I” erases the “W” and now I am only left with an “I” in the text box and so on. I appreciate any help

    It seems you are continuously setting the property node over and over again. This should only happen once if you mouse over it.
    Create a property node for your text control with the following three items:
    (1) KeyFocus (wire a "true" constant to it)
    (2) Text.SelStart (Wire a "zero" constant to it)
    (3) Text.SelEnd (Wire a constant containing the string length of the text).
    Put this property node inside an event structure, triggered by "Mouse enter" on the string control.
    (see if the attached example works for you)
    LabVIEW Champion . Do more with less code and in less time .
    Attachments:
    Enter_Name.vi ‏23 KB

  • HT1296 i have just updated to the newest version of ipod softare, the ipod intalled new software but now all the music and videos on it will not play

    i have just updated to the newest version of ipod softare, the ipod intalled new software but now all the music and videos on it will not play, how do i fix this

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync all music and videos and resync
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.

  • Hi there, Wondering if you might know?  I don't have enough space to update the new software on iPad.  So my facetime isn't working anymore, this is prob why. Seems I have to delete like all the games/apps we have to do so.  Will I lose the progress data/

    Hi there,
    Wondering if you might know?  I don't have enough space to update the new software on iPad.  So my facetime isn't working anymore, this is prob why. Seems I have to delete like all the games/apps we have to do so.  Will I lose the progress data/levels in the games? But how do I back up the games data?
    Please help.  Scared to delete them to update and then not have the space to restore them and if I get them again will the levels/progress be gone?
    Thanks Rachel

    Connect your device to iTunes and do the update through iTunes. Using a computer takes much less space on your device than doing the update on your device.

  • Install RAC 11gR2 and Apply Patches with OUI New Software Updates Option

    Has anyone tried the installation with the New Software Updates Option?
    I will install 11gR2 RAC Grid and I plan to do the following steps:
    1) Install Oracle Grid Infrastructure Patchset 11.2.0.2
    2) Do all the configuration with OUI
    3) Create ASM disks
    4) Install Oracle Database 11.2.0.2 Software Only
    5) Apply Oracle Recommended Patches 11.2.0.2.2 (12311357) and 12431716. (ref. MOS doc [ID 756671.1])
    6) Create RAC Database (advanced option) with DBCA
    With these steps:
    Grid and ASM disks would be configured without the recommended patches, but the database will be created with the patches applied.
    I would not like to do a "Software only" install of GI and then apply the patches because later I would have to manually do all the configuration steps.
    If I use the OUI Software Updates Option to apply the patches, will OUI do all the patching and then let me configure GRID with OUI ?
    Quote from Oracle® Grid Infrastructure Installation Guide 11g Release 2 (11.2) for Linux - Part Number E17212-11:
    " Use the Software Updates feature to dynamically download and apply software updates as part of the Oracle Database installation. You can also download the updates separately using the downloadUpdates option and later apply them during the installation by providing the location where the updates are present."
    I could not find more detailed information about this feature on documentation and MOS .
    Thanks

    Hi,
    You can download Latest Updates And Patches Using using option -downloadUpdates
    ./runInstaller -downloadUpdatesYou can use this note:
    *How To Download The Latest Updates And Patches Using 11.2.0.2 OUI [ID 1295074.1]*
    Don't miss it ..
    *Error: INS-20704 While Installing 11.2.0.2 with "Use pre-downloaded software updates" Option [ID 1265270.1]*
    Note : Please make sure that user downloading the patches updates have the proper/correct permission to download the patch updates from MOS ( My Oracle Support).
    Do not use the /tmp/oraInstall* directories for the download location. Unpublished bug 9975999
    Documentation explaining ...
    4.5.1 Running Oracle Universal Installer
    Downloading Updates Before Installation
    http://download.oracle.com/docs/cd/E11882_01/install.112/e16763/inst_task.htm#BABJGGJH
    Regards,
    Levi Pereira

  • HT1688 I tried to update my iPhone 5 this morning with the new software update and now it won't turn on. When I plug into my itunes account, it says my phone is in recovery mode. Was working perfectly prior to the attempt to update. How do I fix this?

    I tried to update my iPhone 5 this morning with the new software update. Now my phone won't turn on. When I plug into iTunes, it says that my phone is in recovery mode and that it needs to be restored to factory settings. Is there a way to fix this without losing my settings? Why would this happen on a software update?

    Zach Doody wrote:
    itunes says i cannot update the phone as it is in recovery mode.
    That is not what it says. Read the message again. It's telling you it has detected an iPhone in recovery mode and it must be restored.
    Restore it. You don't have a choice at this point.

  • I installed new software updates, and now when I try to open up pages it tells me "Pages cannot be opened because of a problem." does anyone know what I can do?

    I installed new software updates, and now when I try to open up pages it tells me "Pages cannot be opened because of a problem." does anyone know what I can do?

    1)Copy this below from --{code} to --{code}
    --{code}
    set p2l to "" & (path to library folder from user domain)
    set the_cache to p2l & "Caches:com.apple.iWork.fonts"
    tell application "System Events"
              set maybe to exists disk item the_cache
              if maybe then delete disk item the_cache
    end tell
    if maybe then
              display dialog "I deleted the file :" & return & the_cache
    else
              display dialog "The file :" & return & the_cache & return & "was unavailable !"
    end if
    --{code}
    2) Than open Applescript Editor in your applications and paste it
    3) Than select "Compile"
    4) Than select "Run"

  • I just downloaded a new software update to my ipod touch and now my ipod is frozen with a screen picture of music round blue symbol and an arrow displaying a cable connection. I received a message saying that the download was not successful.

    I just downloaded a new software update to my ipod touch and now the ipod and screen are frozen. I received a message that the download was not successful and now my screen is showing the blue round itunes symbol with an arrow pointing to the symbol and shows a cable below it. I have tried the restart of pushing the two buttons together and waiting 10 seconds for the apple symbol which appears and then go backs to the same stuck symbol. My computer is not recognizing the ipod either and will not connect. What needs to be done?  Thanks.

    Try manually placin the iPod in Recovery Mode and restore via iTunes.
    Next try DFU mode and restore
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • Sir you have replied for my question, and i updated my software and all those things, yet it is showing unable to connect network, but i can use internet by sim, is it the problem related with hardware? can you tell me a solution for it?

    sir you have replied for my question, and i updated my software and all those things, yet it is showing unable to connect network, but i can use internet by sim, is it the problem related with hardware? can you tell me a solution for it?

    you seem to be referring to an ongoing issue
    click here to respsond -> sir help me to enable my network connection, my iphone 4s is not connecting with any wireless connection, what i should do for enabling network connection?
    CCC

  • How do you close apps you hve looked at with the new software update?? You used to have to double click the home button and the apps would come up to delete bu that doesn't happen anymore.

    How do you close apps you hve looked at with the new software update?? You used to have to double click the home button and the apps would come up to delete bu that doesn't happen anymore.

    The apps in the multitaskbar should appear like pages on the whole display. To close them, just swipe from the bottom to the top. you can select single apps for closing, when you swipe them like you would swipe your homescreens.

Maybe you are looking for