HT3204 how do I restore my iphone 4gs as all I have on my screen is the itunes logo and the usb connection
After I tried to download the latest operation system for my iphone 4s I got the message about my phone being in recovery mode. I went about the copying the software then the message "could not be restored reeor 3014 appeared What can I do to get my phone working again??? Please help
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
But... if the Device has been Modified... this will Not necessarily work.
Similar Messages
-
Hi how do i restore my iphone 4s back to factory settings if i dont know the restriction code as the code to unlock my phone isn't accepted?? Please help I have upgraded and want to erase all my things off this phone to sell it
Forgotten Passcode or device disabled after entering wrong passcode
-
My iPod touch is off and wont turn on because it has the itunes logo and a usb pointing to it, so when i looked it up online, it says i have to restore it but i don't want to because i don't want to lose all my pictures. What can I do?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I was trying to transfer itunes to my macpro from my iphone 4 and the phone froze up with the itunes logo and a usb cord looking like its suppose to plug into the itunes.. Now my phone wont go past that screen and i cant use the phone at all... Help if you can?
Contacts are designed to be synced to a supported application on the computer or a cloud service.
Pictures taken with the device are designed to regularly be copied off the device to a computer as would be done with any digital camera.
If you have failed to use the device as designed it may be too late to recovery anything.
Is the device regularly backed up to a computer via iTunes? If so, the most recent backup (when restored to a replacement iOS device) should contain all contacts and pictures as of when the backup was created. -
My iphone is no longer working I have black screen with a picture of the itunes logo and a USB cable. When I try to connect my iphone to itunes the device is not detected, can anyone help me? I desperatley need my phone back
I have had a 3GS for 2+ years. After upgrading to IOS 4 (now 4.3.5) I began having problems. In the past week, my screen went to the itunes logo and USB cable twice -- unprovoked -- just found it sitting there like that! I connected to itunes and it did restore from a backup but it is a major inconvenience. I am also searching for answers, but better back-up regularly!
-
I just did the update for my apple TV and it got halfway through the update the TV screen showed a itunes logo and a plug in cord and wouldnt respond. I unplugged it and plugged it into my computer to try and restore it and now I can get audio but no vide
DFU mode? How do I do that? So far the only thing I can do is hold down both buttons to power it on and nothing is on the screen and it wont reconize on my computer....
-
TS1702 cannot restore the phone on the screen just show itunes logo and USB cable
cannot restore the phone while trying to download the ios 6
the screen shows only itunes logo and USB cableplug your ipod into itunes...it may not do anything plugging it into your own itunes so you may want to try plugging it into someone elses to save the trouble. I had this same problem last week plugged it into my dads ipod and it worked (:
-
How can I restore my iphone 4s to a previous backup I can see in the backup folder?
Ok, here's a question for the restore/ backup pros.
On 1/4/14 I thought I would back up my iPhone 4s because it had been over a year (yeah, I know not a good idea to wait so long) since I had last backed it up (8/13/12, to be exact). So, when I connected it to my computer, iTunes recommended I update the iTunes software. So, I did. Somewhere in the middle of the update I noticed that my iPhone kinda "rebooted" and I saw what a friend of mine referred to as the "restore iPhone" image on it.
Then, I received an error message from iTunes saying that there was a problem with my iPhone & that I would have to restore it to factory settings. WTH!!!!
I went ahead and befored the restore. Oddly enough, I seemed to get all my data back. Heck, I even got emails & contacts that I added minutes before I tried to back it up. I thought I had dodged a bullet & then I started to notice Apps that were missing & other Apps that I had deleted long ago back on the iPhone.
Then, other anomolies surfaced, like photos missing, contacts missing, & worst of all the App that I used to store some really preceious pictures, photo vault, was also gone (and all my most precious pictures). Those pics were not in my camera roll any longer as I had moved them to this App.
Okay, I studied all I could on the net & learned where the backup files are stored on my computer and huh, it looks likes it took a back up right before (during?) the iTunes update that caused all this mess. The problem is, iTunes doesn't show this backup as one I can select when trying to restore it.
My Question is, "How can I restore my iPhone to the backup dated 1/4/14 that I can clearly see in the backup folder?"
Many thanks, psmcpheroops. typo: "I went ahead and befored the restore." should be... I went ahead and performed the restore.
-
How do you restore your iPhone without deleting all your apps?
Ok so I'm trying to remove Cydia from my iPhone 4, and I wanted to make sure it's fully removed. I managed to delete the app straight from my iPhone by force deleting the Cydia Installer package, and the icon is totally gone my iPhone. I deleted it because the jailbreak is eating up my battery. However, I don't think the jailbreak is completely removed.
Question: How do you restore your iPhone from iTunes without deleting all your apps and everything from your iPhone? Like when I click restore it says it will delete it and you will have to repurchase your apps. I have tons of apps and I don't want to spend my money for the same thing twice! I want to know how (step-by-step) to back up and restore your iPhone without it messing with any of the photos, apps, etc.
Also, will updating your firmware to 4.1 wipe out the jailbreak?
Thanks a ton.How do I know if it's on my computer?
If you bought the apps via iTunes, they will be on your computer. If you bought them with the iPhone, syncing would have transferred them. Look for them in:
~/Music/iTunes/iTunes Music/Mobile Applications
Photos taken with the iPhone are transferred via iPhoto or Image Capture when the phone is connected to the computer. Other photos on the phone must have been synched from the computer, so should still be there. -
I am using iphone 3gs. downloaded ios6 and it stuck to itune logo and an usb logo on screen.
hi
i am using iphone 3gs. today i downloaded the new ios6. after the downloading the phone switched off and now there is a sign of itune and usb cable on my screen and nothing else is happening. i dont have mac. i am using compaq 610. kindly guide me, how i can restore my iphone.
thanks
MustafaYou must have the latest version of iTunes on your PC, and you must connect the phone to your PC with a USB cable. It should then be recognized in iTunes and should restore. If it does not see: http://support.apple.com/kb/HT1808
-
I tried to update my iphone,,ran downstairs ot garden since it took 30 minutes. I cam e back with an itunes logo and plug on the front cannot use my phone or call it....apple's store in tampa is close...I will probably get in a car accident on my way to the store 1 hour and 30 minutes away after I get pulled over for speeding after I get a flat tire(;
Hello hstacy
Check out the articles below to troubleshoot issues with resolving issue with issues updating your iPhone. If you are having issues with it not being seen, pick one of the two articles that goes with the type of computer you have.
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/ts1591
Regards,
-Norm G. -
my iphone has a itunes logo and usb cable picture on the screen....what can I do to get it to work
What happens when you plug your phone into itunes
-
i have tried to restart the phone, didnt work. anyone else have this problem?
- Try manually placing the iPod in Recovery mode and then try a restore.
- Next try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If you can't turn the iPod off, let the battery fully drain. After charging fro at least an hour try again. -
My iPhone has stopped working all I have is a screen with the apple logo on it
My iPhone has stopped working. All I have is a black screen with the apple logo displayed. The phone does not respond when I press the buttons and switches,
Any thing happen if you try to connect to iTunes?
One thought - do not charge it and let the current charge fade out - then when you charge it back from scratch it should reboot into some working mode
Another - if you do not want to wait - bring it to a store -
When i plug in my iPhone to itunes so i could restore because i found it, itunes gives me error code 2009. on my iPhone, all that is displayed on the screen is the itunes logo and a usb cable saying to connect it to itunes. Help please?
Error 2000-2009 (2001, 2002, 2005, 2006, 2009, and so on)
If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue persists, it may be related to conflicting security software.
Maybe you are looking for
-
Obtain list of fields for marketing attributes against BP
Hi All, I'm working on a data extraction routine for BP data and need to be able to allow the user to select which fields will be extracted and added to the output file. I've got some standard code that so far uses a data dictionary structure to cre
-
Why can't i drag text/link to the tab bar and have it open a new tab?
Whenever i drag highlighted text, drag a URL, or drag a link to an image/video to the tab bar nothing happens. Previously FF would open this as a new tab, but i can't seem to find out what is wrong.
-
My plugin targettype Name is not working right. When I start out with a new target type, it does show the display name correctly in the various places. THen when I add an instance of that target type, the display name remains good. Then the next time
-
i exported a table from database test to other database through logical backup. while importing i am getting error ora-01950-no privileges on table space 'mchtbs' the user from which i exported the table default table space is mchtbs. i am getting my
-
Error in Adobe LiveCycle ES configuration manager
Hello,<br /><br />When running Adobe LiveCycle ES configuration manager I´m getting this error, and the configuration process stops:<br /><br />what is this component: DeployDSCs? Can I take it form the configuration?<br /><br />Thank you<br /><br />