HT3204 i cannot access my iphone what i need to do?

i cannot access my iphone,wt i need to do?

See Here  >  http://support.apple.com/kb/HT1808
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
But... if the Device has been Modified... this will Not necessarily work.
Note:
You have not stated which iPhone you have and which iOS it is running.

Similar Messages

  • I have broken my screen and cannot access my iphone. I have an icloud account which I have used to back up my phone previously but nothing is showing on the website. How can I backup my data?

    I have broken my screen and cannot access my iphone. I have an icloud account which I have used to back up my phone previously but nothing is showing on the website in contacts etc. As I can enter my pin I cannot connect it to a laptop. Is there anyway of backinh up my data, pictures etc?

    No there isn't. If you check iCloud, you are not showing any backups at all? Did you have the phone set to sync contacts in iCloud, or were you just backing up to iCloud? If you were just backing up, then you should be able to access the backup, but if you were not syncing, then you probably cannot see the contacts in iCloud. You would have to wait until you restore from the backup to see them. You will probably have to go onto the iCloud website to erase and remove the device from Find My iPhone if you want to clear it off.

  • ITunes has stopped working.  Can play songs, but cannot access store.  What do I do?

    iTunes has stopped working.  Can play songs, but cannot access store.  What do I do?

    Hello there, Ellen317.
    The following Knowledge Base article provides some great in-depth steps for troubleshooting your issue. Start with the section titled Troubleshoot issues in Windows:
    Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro

  • HT4623 i have installed the beta version of 6.1 a month ago and now i cannot open my iphone 5 it needs regestration and when i try to register it says that it couldnt complete and i need to register in the developer what can i do now to reopen my device?

    I have installed the beta version of 6.1 a month ago and now i cannot open my iphone 5 it needs regestration and when i try to register it says that it couldnt complete and i need to register in the developer what can i do now to reopen my device?

    Probably wasn't a good idea to install beta software on a device when you're not a developer.
    Apple clearly states that beta software is not to be installed on production devices.
    Not really much you can do except wait for iOS 6.1 to be officially released and then install it.

  • I created a website using MobilMe and now I cannot access it. What do I do to recover it?

    I built a website using Apple software and now that MobileMe does not exist I cannot access it. What can I do to retrieve it?

    You cannot retrieve the actual html pages from MobileMe as all contents have been deleted. However ifyou are using iWeb they would have done you little good as iWeb cannot open html pages.
    iWeb keeps its data in a file called 'Domain' which by default lives in (user)/Library/Application Support/iWeb and when you open iWeb it should open the file automatically and show your site, which you can then publish to another server.
    If you have moved the Domain file to a different location you will need to find it and open it in iWeb or move it back to the default location.
    If you cannot locate the file you will have to recreate your site from scratch.
    The method of publishing to another hosting service depends on which version of iWeb you have: please see this page -
    http://rfwilmut.net/missing2

  • Cannot access my iphone

    I logged into iCloud then to the Find My iPhone app. As I am planning to sell my iPhone, I thought it should be deleted from iCloud so I went ahead and deleted it. Now I cannot access my iPhone cause it is reported stolen. Please advise! Thanks.

    You may be right. Basically the sim got locked as I reported it stolen. I will get a new sim and see how it goes. Thanks for the effort luuklp & KiltedTim.

  • Cannot access 2g iPhone

    I recently bought an iPhone 2g off ebay planning to use it as an ipod/camera.
    I read that I could use a de-activated sim card to turn the phone on. I bought one and installed it. The no sim card message go's away, but I am still stuck at the emergency call screen and cannot access my iPhone.
    Do I have any options?
    Thanks, Scott

    http://support.apple.com/kb/HT3406

  • I dropped my iphone 4 and it did the brick thing now i have it in recovery mode but it keeps saying unknown error cannot recover the iphone what could be wrong?

    i dropped my iphone 4 and it did the brick thing now i have it in recovery mode but it keeps saying unknown error cannot recover the iphone what could be wrong?

    It's broke?

  • Hi, i want to sinc my iphone with my new pc, i want to transfer music , but the old one musiz will be deseaper from my iphone, what i need to do, thanks

    hi, i want to sinc my iphone with my new pc, i want to transfer music , but the old one musiz will be deseaper from my iphone, what i need to do, thanks

    See Recover your iTunes library from your iPod or iOS device.
    tt2

  • HT1688 forgot passcode cannot access my iphone

    forgot passcode cannot access my iphone

    Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
    A
    1. iOS- Forgotten passcode or device disabled after entering wrong passcode
    2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    3. Restoring iPod touch after forgotten passcode
    4. What to Do If You've Forgotten Your iPhone's Passcode
    5. iOS- Understanding passcodes
    6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    7. iOS - Unable to update or restore
    Forgotten Restrictions Passcode Help
                iPad,iPod,iPod Touch Recovery Mode
    You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
    You can restore from a backup if you have one from BEFORE you set the restrictions passcode.
    Also, see iTunes- Restoring iOS software.

  • Cannot access Apple ID, and therefore cannot access reset iPhone

    Okay, so I went to update my iPhone 4S to the latest software update (7.02 from 7.0 I believe). The new update downloaded, installed and as my computer went to restore my backup it asked to plug in my iPhone to my computer (which it already was). I left it for a long while and nothing happened so i disconnected it and reconnected - upon which it did a factory reset - which i was fine with because I have a back-up.
    However, upon reset iTunes tells me that my phone is linked my apple ID account and displays the email address to which it is linked. I try every possible password to no avail. I then go to reset my password but Apple never send an email through to the email address in question,despite a number of attempts. I then decide to create a new Apple ID - and entered the email address for which iTunes said my phone was linked to...and it says that the address isn't in use...
    I am completely stuck for what to do as i cannot currently access my iPhone.

    This feature has been introduced to make stolen phones useless to those that have stolen them.
    However it can also arise when the user has changed their Apple ID details with Apple and not made the same changes to their iCloud account/Find My Phone on their device before upgrading to iOS 7, or if you restore from a previous back up made before you changed your details.
    The only solution is to change your Apple ID back to its previous state with Apple at My Apple ID, verify the changes, enter the password as requested on your device and then turn off "find my phone".
    You should then change your Apple ID back to its current state, verify it once again, delete the iCloud account from your device and then log back in using your current Apple ID. Finally, turn "find my phone" back on once again.
    This article provides more information about Activation Lock.

  • Cannot access my Iphone 3gs after upgrading to 5.01

    Hi,
    I bought an unlocked Iphone 16BG 3Gs from eBay. I used it for a week
    TillI connected my Iphone to ITunes and they notify me I needed to upgrade my
    Software and I accept.
    That was the mistake I made as it upgraded to 5.01 and I cannot access
    myphone. When I put on my phone I am getting the activation screen. I try completing the activation but with no success. When I connect my phone to USB and start Itunes I am getting error message
    "There is no Sim card installed in the Iphone your are attempting to
    activate"
    I tired the following with no success.
    Itried downgrading from 5.01 to 4.33 by downloading firmware from google.  Holding shift button and clicking restore onITunes, selecting the firmware but I am getting error message" Iphone“Iphone” could not be restored. An unknown error occurred (3194)
    I also tried using RedSn0w program and Tiny Umbrella and no luck at all.
    Please help.
    Thanksyou,
    Charles.

    Is the SIM that is installed from the carrier the device is locked to?
    Was the device hacked or jailbroken?  Possibly to unlock the device?

  • Aironet 1300 cannot access by iphone

    I use the aironet 1300. In windows perform it can detected the sid and applied the ip but when i use apple iphone it just detected the sid but cannot apply ip. so how can i do.

    Hello,
    i'm a french user of behance, on i've got the same problem as Sarah; i can connect on my account on internet but with my iphone it
    doesn't work. I delete then reinstall the app and restart the phone, but it is the same. I recieve popup from beahnce on the phone as if i'm connected, but i cannot
    access on the app....
    Thank you very much for your answer

  • Cannot access to iPhone behance apps

    i'm a french user of behance, on i've got a problem on the iphone app; i can connect on my account on internet but with my iphone it
    doesn't work. I delete then reinstall the app and restart the phone, but it is the same. It is as i'm still connected because I recieve popup from beahnce on the phone, but i cannot
    access on the app to my account....
    When i try to log and enter connection, it reload the page "connect or subscribe" again and again and again...
    Thank you very much for your answer

    So that we can provide the best support, can you send us a ticket here? We'll get back to you within a few hours with one-on-one help: Behance Support & Forum : Submit a request for assistance

  • I have downloaded both photoshop and in InDesign, but I cannot access them. What do I do?

    I have downloaded both apps and the cloud does not give me an option to launch or use the applications. When I click on the name of either app, it brings me online where it says 'download now'. When I click on this, it brings me back to the cloud (where it says I have already downloaded it). It brings me back and forth and I cannot access either app in order to use it.

    The applications aren't in the cloud, they are on your hard drive.
    If you've downloaded the apps, they will be installed where applications are always stored on your computer. You didn't tell us what operating system you're using. If you are using a Macintosh, they will be installed into you Applications folder. Just launch them from there.

Maybe you are looking for

  • Customer payment history record error

    Hi I have a query related to the customer payment history record. Actually in customer master data I have not click in payment history record check box field, thats why system not calculated customer payment history in report S_ALR_87012177 and table

  • When do we use Oracle LDAP ?

    Version: 11.2.0.3 on RHEL 5.8 I have used tnsnames.ora file and easyConnect to connect to the DB. Recently , I came across Oracle LDAP which uses $ORACLE_HOME/network/admin/ldap.ora . What kind of applications use Oracle LDAP to connect to a DB ? Why

  • Microsoft Utility Rate Service - not available in your market

    We are planning to use Microsoft utility Rate Service for one of our clients but the link says "Not available in your market." 

  • Re:Form Settings

    Hi All, In my .srf form i have 3 matrix.i have to set the form settings option for all the three matrix.i.e. i have to make the visibility of the columns as per the need in the form settings.Iam getting one matrix row and table format. How should i a

  • Parsing Get-WinEvent "Microsoft-Windows-TerminalServices-LocalSessionManager/Operational"

    i'm trying to get the logon,logoff,connect, disconnect info from the above log.  Here is what i have so far: Get-WinEvent -logname "Microsoft-Windows-TerminalServices-LocalSessionManager/Operational" | where {($_.Id -eq "21" -OR $_.Id -eq "24" -OR $_