HT3204 rebooting and trouble shooting
has anyone else had problems restoring they're phone with the trouble shootig info provided
Thanks for sharing the solution.
Regards,
Pramod
Similar Messages
-
I have been trying to open itunes that has already been installed. But, the thing is it never opens and when i do right click and trouble shoot also, it doesnt open. I dont whats wrong with itunes and my comp is 64 bit windows 7. Can somebody please help
no its 64 bit version of itunes. Can you please help me. I am not able to sync my iphone.
-
Airport Problems after update and trouble shooting
Hi There,
I have an Intel iMac and after updating airport i've been having problems with it. I'll be using the internet and all of a sudden it will just disconnect and cannot detect any network connections. Now, i've seen the other posting already about fixing this problem, and I have done what it says to fix the problem by moving the system configuration folder and the com.apple.systempreferences.plist file. After I do this, it works for a few hours but then i have the same problem again. The folder and the file is recreating and i have to follow the same steps and move them again, but then every few hours it keeps getting recreating. Is there something that i can do so i'm not constantly moving the files around and having to re-setup my network. Is there a way to reset Airport to the way it was before i installed the update?
Thanks"Is there a way to reset Airport to the way it was before i installed the update?"
Of course you can erase your hard drive and reinstall up to 10.4.7, and not go any higher. The problem is the 10.4.8 update, or some part of it. The many other updates recently posted for different apps are not part of the cause, so those updates can be installed.
"Is there something that i can do so i'm not constantly moving the files around and having to re-setup my network."
Yes, once you've followed the "restart twice" instructions involving preference file deletion, it appears that by turning off AirPort before letting it sleep, restart, or shut down, those two files will not get the same corruption recreated. Afterwards, you should be able to turn on AirPort and after a slight delay of about six to eight seconds AirPort will be able to reacquire your network.
If you forget to turn off AirPort before sleep, restart, or shutdown, then those files will again be corrupted and you'll have to go through the process all over again. I ran through it about 50 times, changing this and that, and that's all I could come up with.
Hopefully someone else out there with a different perspective will be able to figure out what else needs to be done. -
Issues and Trouble shooting steps in NWDI Track
Issue: Getting below error while saving the track in NWDI.
ERROR: SLD name-server configuration error: More than one name server configured in SLD
The message may also look as follows:
Unexpected error; inform your system administrator: < Localization failed:ResourceBundle='com.sap.cms.util.exception.CMSExceptionMessages' ,ID='SLD name-server configuration error', Arguments: [] > : Can't find resource for bundle java.util.PropertyResourceBundle, key SLD name-server configuration error. Please read SAP Note: 1118009.
Solution: As per SAP Note 1118009,
1. Log on to the SLD used by CMS with SLD administrator authorization.(The address of the SLD used by CMS is contained in CMS WebUI in the Landscape Configurator in the domain data).
2. Navigate to 'Administration -> Content Maintenance -> Subset:Landscape Description and Class: System Landscape Directory (or SAP_SystemLandscapeDirectory)
3. At least two System Landscape Directories should now be found.
4. Choose the first SLD to view the details. If the entry 'Name Server'exists under 'Roles, this SLD acts as name server.
5. Return to the overview screen and choose the next SLD. Does this SLD also act as name server?
6. Proceed until you know which SLDs act as name server.
7. Since CMS accepts only one name server, you must decide which of the specified SLD servers should act as a name server in future.
8. Once you have decided, remove the role 'Name Server' from all other SLDs. To do this, select the SLD server, and, under 'Roles' remove the role 'Name Server'. Save all of your changes.
9. At the end, only one SLD server should have the 'Name Server' role.You can now save tracks in CMS again.Thanks for sharing the solution.
Regards,
Pramod -
Unable to create file - SXMB_MONI -- Trouble shooting
I am replicating Products Data from SRM to MDM. I am using BBP_CCM_TRANSFER_CATALOG report in SRM. This is Proxy-File scenario. After executing the above report, I can seee the Message in SXMB_MONI in PI.
The message has passed through these steps.
Inbound Message (Central) (Green Flag- Scheduled)
Reciever Identification
Interface Determination
Reciever Grouping (Black thick Arrow Head - Scheduled for Outbound Processing)
Message Branching According to Receiver List
Request Message Mapping
Technical Routing
Call Adapter
Response (Black Flag - Processed Successfuly)
I am not able to see the File written at outbound server and target file path mentioned in File adapter.
Can any one please help me in understanding the above sequence and trouble shoot so as to get the file.Hi Sudha
Reciever Grouping (Black thick Arrow Head - Scheduled for Outbound Processing)
Extract from one of forum post .. see if it helps
Register the queues via t.code sxmb_adm where u have an option manage ques.
Once you register the queues, they default activated.
If u want to manually unlock then u need to go to transaction SMQR,SMQ1,SMQ2 for queue management. There u have to select the queue and activated all entries.
SMQ1 u2013 qRFC Monitor for the outbound queue You use this transaction to monitor the status of the LUWs in the outbound queue and restart any hanging queues manually.
SMQ2 u2013 qRFC Monitor for the inbound queue. You use this transaction to monitor the status of the LUWs in the outbound queue.
U may schedule the report RSQOWKEX (Outbound Queues) and RSQIWKEX (Inbound Queues) to restart the queues automatically.
To Cancel the messages from MONI with the Status Scheduled for Outbound Process
Schedule the Report RSXMB_CHECK_MSG_QUEUE
SAP_BC_XMB_DELETE
Regards,
Srinivas -
I have iPhone 6, 8.3. I cannot use bluetooth at all from my device, even to connect my macbook pro. I did all the recommended trouble shooting such as reboot and reset network settings. but it does not recognise any bluetooth device. Pls help.Thank you.
See iPhone BT profile on what can be connected/paired:
iOS: Supported Bluetooth profiles - Apple Support
And BT troubleshooting:
iOS: Troubleshooting Bluetooth connections - Apple Support -
My new ipod nano is not recognized by my itunes and I have tried the trouble shooting tips
my new ipod nano is not recognized by my itunes and I have tried the trouble shooting tips
This came from another thread, but worked for me. Problem is with newest iTunes 4.62 and Windows 8.1. Unistall iTunes, as well as its helper programs (Apple Application Support, Apple Mobile Divice Support, and Apple Software Update). Reboot, and reinstall iTunes. It will reinstall all the other ones and you should be able to connect your nano. Good luck.
-
I uploded the new itunes software and now my ipod touch is not getting reconized in my itunes. I went through all the trouble shooting support from apple. But I do have a avast antivirus on my computer i wonder if that is what is holding it up
Could be since it (security software) is listed as #5 in the following:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows -
Ever since I uploaded i0s7 I haven't been able to receive I messages or face time. I have took it to the apple store and they couldn't figure it out. I have also followed the trouble shooting from I tunes and still can't get it working
Hi,
Strikes -
Go into compositionReady and have 3 variables you will be able to set them like this
strike1 = 0;
strike2 = 0;
strike3 = 0;
So on the wrong item click have
if(strike1 == 0) {
PLAY STRIKE1 ANIMATION
strike1 = 1;
else if(strike2 == 0) {
PLAY STRIKE2 ANIMATION
strike2 = 1;
else if(strike3 == 0) {
PLAY STRIKE2 ANIMATION
strike3 = 1;
So this will make it so when the wrong item is clicked each strike will be played in order.
Random Scrolling -
You should look into the Math.Random function to make things random in edge.
This is an example of the Random function. It will generate a random number up to 100.
var random = Math.floor (Math.random () * 100);
Lose Screen Score -
So we can create another variable in compositionReady for the lose score.
score = 0;
Now when the user gains a point to add to the score you could do this code on the click
score++;
which would add 1 to the score, However you can add however much you like to the score doing "score + 2" and so on.
To edit a text with the score at the end which I'm assuming you will want to do you will use .html
so $("Text").html("You score is " + score);
I hope this helps! -
I can not dowload the new updated software for my Ipod touch 4G. When i do I get an error message that says Network connection has timed out. I have done the trouble shooting steps. Downloaded the latest version of Itunes, and checked network connection
Disabling the computer's antivirus and firewall during the download and update usually resolves the timeout error.
-
I can't log into my iTunes account on my iPhone 5s. I logged out a few days ago to trouble shoot because I was trying to redeem some iTunes cards but when i pressed redeem nothing happened. I then tried to log back in immediately afterwards. I was unable to do so. After clicking "sign in" at the bottom of the apps main page, it brought up another menu where I clicked "Choose existing Apple ID". After pressing this the menu disappeared and nothing happened. I tried this multiple times and received the same result each time. I tried the other available option of creating a new AP ID to log in with and that one worked perfectly fine. I am clueless as to why the log in for me is either not able to load or just completely blocking me from getting back into my iTunes account on my phone. Not only can I not listen to the music I currently have, but I cannot log in to purchase the new music that I wanted to with my unused iTunes gift cards
I have the same problem too and tried alot of things like time zone , restarting or changing DNS of wifi connection to 8.8.8.8 still nothing happens .. !!
iPhone 5s, iOS 8.3 -
When I try and launch Firefox, I get this error message >A copy of Firefox is already open. Only one copy of Firefox can be open at a time." and have tried all of the trouble shooting tips, can you help? I thought if I were to completely uninstall and re install it might help, but I cannot seem to find instructions to do this....
See [[Firefox is already running but is not responding]], the image shown in that article is the Windows equivalent of the error message that you are receiving, but the information relates to the Mac.
-
About a month ago my wifi switch greyed out. I went through all the trouble shooting and ended up going to the Genius Bar and got a new iPhone 4S. Now the switch greyed out on the new one.. help!
I've had my new one for less than 3 weeks. What gives? I'm loosing faith in appleno body?
-
I have reinstalled Itunes 10.4 .1 10. windows says drivers are not installed. I have followed all trouble shooting advice, fixes and updates for windows 7
I have reinstalled Itunes 10.4 .1 10. windows says drivers are not installed. I have followed all trouble shooting advice, fixes and updates for windows 7
-
Have done all trouble shooting tech a through Apples and still have not resolved issues on Windows and itunes not detecting my Ipod nano 5th generation device. Tried restoring the device manually using disk mode and still not being detected by the computer. Device is our of warenty as when service repair charges are $125.00 dolars more than I paid for this device. There must be some way to restore the entire device to factor settings without having to be connected to itunes and Windows. I wish I could connect but again device is not being read. I have another Ipod that is 8GB instaed of 16GB and it works fine. The sad thing about this situation is that my 9year old daughter worked hard doing delivering fliers for a long time to save her money to buy this 16 GB 5th generation Nano. Otherwise the Ipod works well but will not syncronize songs as it is not being detected. Maybe this is a result of corrupt files that got onto my daughters Ipod somehow and thus causing it not the be detwected through the USB connection thus as a result not be understoud as a working device through Windows and itunes. If anyone can help me out there including itune techs that would be well appreciated, but for now my daughter is not able to add new or delete any songs on her ipod as well pictures, and everything. Thanks
Try changing the cord. I could NOT get my computer to recognize my iPod 5th Gen until I read somewhere that different apple devices use different cords. I was inadvertently using my iPad cord and that caused my computer to not recognize my ipod.
Maybe you are looking for
-
Problem Regarding Changes in field in Table VBAK
Hi All, I am facing problem with data extraction for data source 2LIS_11_VAHDR. There is a field Request Delivery Date -VDATU, which was not picking data as the settings in Sales Order Creation were not set. Now the changes have been made while creat
-
Manifest Class-Path: attribute setting
Hi there, Though the classpath entry is made it is not reacting as expected...Need help in understanding the classpath attribute behaviour on web Logic Server 7.0... how do I make a jar file inside a war file(w
-
My iPhone says "o death" where the date should be on the lock screen, why is it doing this and how do I get the date back?
-
Problem installing cs5.5 - exit code 6
Hi everyone, I'm trying to install cs5.5 web premium (upgrade) on windows xp sp3 but have some trouble. Every program of the suite install right but not acrobat. At the end of installation I receive the error below. I try to solve reinstalling and fo
-
Flash Player 10.2.152.32 / Firefox 3.6.15 / XP Pro SP3
I have just installed (after uninstalling earlier version). I get sound but no picture on some sites (e.g. YouTube) and nothing at all on others BBC. Is this a known issue and is there a fix? I've tried several re-installs without sucess. Running out