HT3209 i rented an HD movie and im not able to see it .

help !!!!

Time Capsule cannot read an NTFS drive.. you need to format the drive Fat32 or HFS+.
You do not need the drive formatted to windows NTFS for windows to read it.. this is network access via SMB protocol.. the drive internally is formatted HFS+ and can be read fine by the windows computer.

Similar Messages

  • Apple TV and iTunes not able to see each other

    I think I have found a bug in either iTunes or Apple TV. My network configuration is a bit complicated so I will describe it first.
    Cable modem into my house hitting a Linksys WRT330N router at a central box in my laundry room. From there my house is hard wired to different rooms of the house. One goes to my office where I have a Apple Extreme N airport, connected to my PowerMac and my iTunes library. Again out of the central point in the laundry room again hard wired I have a wire going to my living room, where I have another Apple Extreme N airport, this is where my Apple TV is hard wired too. I have all the latest firmware and software installed on all my devices. Also both Airport Extreme's are setup using bridge mode and letting the Linksys serve the IP addresses for my network.
    Now to the problem. I can not explain when or why but my Apple TV and iTunes are not able to see each other after about 48 hours. I have tried all kinds of troubleshooting steps including changing my connection from being hard wired to wireless connecting directly to the Airport Extreme my iTunes computer is connected too. I know my network connection is good as I can see trailers and pull up video's from uTube.
    The only way to get them to see each other again is to do a factory reset of my Apple TV. After I do this they can both see each other again. But again after about 48 hours they lose the ability to see each other. I have taken these steps twice now to fix the problem
    I just finished reseting my Apple TV and am going to watch it to see when it stops working the next time.
    All of these problems started the other day when I introduced a new Apple Extreme N router in my my network. The airport Extreme seem to be working fine with my PS3 and XBox 360 that is also connected to it. So I don't think it's the router that is causing the problem.
    If I had to guess I would say something in the Apple TV is locking up. Although I have tried power cycling the Apple TV which does not fix the problem. I'm going through 3 routers to get between the Apple TV and the iTunes library somehow it appears the Apple TV is losing it way.
    I welcome any help as I don't want to have to keep factory resetting my Apple TV to keep it working.

    Fascinating just reading about your setup. I have a WRT350N and have noticed that it will drop its speed, sometimes down to 1Mbps. It seems to do so at about the same time every day, but usually comes back to speed in about 5 minutes. In my experience, the Apple TV will disconnect if the speed falls this low. Try monitoring the Linksys with Netstumbler, Vistumbler, or just in the Windows Network utility.
    Check the "lease obtained" and "lease expired" times for your router to see if that is when the network fails. I've just finished reading an angry thread over at the Linksys forum about the WRT330N where someone mentioned that the router wasn't renewing its lease.
    "I cannot set it run off automatic DHCP from the WRT330N, the router will not assign it an IP every time the lease expires, causing me to have to manually set an IP on the Print server. That's annoying. Having the router drop IP's to individual machines after 12-48 hours...very annoying."
    http://forums.linksys.com/linksys/board/message?board.id=Wireless_Routers&thread .id=67412
    If that is the problem, then I would consider setting up a Static IP address for your Apple TV. You can do that through the user interface -> Settings -> Network -> Configure ... (Quite intuitive as you only have change IP address and the subsequent details remain the same.)
    My router assigns IP Addresses in the ranges of 192.168.1.100 ->149. The idea here is to choose an address outside of that range but is not greater than 192.168.1.253 (and should not end in the number 1). You shouldn't have to change the linksys router as long as 50 clients are assigned in that range. You'll have to figure that out by accessing your router webpage at browser address 192.168.1.1 -> the default password is "admin" (without the quotes).
    Good luck.

  • Wf and Wi not able to see for ESS

    Hi Gurus,
    Am having an issue that wf and WI is not able to see .
    The scenario is user filled the leave time sheet thru portal and i cant able to see the status of that as am not able to  see the workflow and workitem.
    When i run a transaction for that user i see the date created and no workflow is listed .
    could u guide me where can i find it and how.
    Thanks in advance.
    Plato

    ws 12300111 is the WF v r using.
    But this is for a particular user.
    What he has filled thru EP say on dates 10 ,12 is not reflected as workflow and WI.
    Thanks

  • Not able to see the history period and data

    Hello
    I have 2 time planning bucket periods - history of 24 months and future 14 months.
    have assigned both in the data view.
    i have loaded the data from infocube to planning area and i got the successful message.
    during the transfer i have used the key figure assignment feature and used my key figure which is zhistory.
    i have not used 9AVHISTORY.
    my issue is i am not able to see the history periods and hence not able to see the data in history.

    Hi
    The data get loaded and its also available in the planning area, as you defined the time bucket profile according it  i.e.24 month in past and 14 month in future. Its only while definition of data view you have not defined these flags you were unable to view this data.
    Hence as I mentioned data has correctly loaded in the planning area just not getting viewed.
    I hope this answers your question.
    Thanks
    Amol

  • HT1657 i rented a movie and its not on my mac book pro and it took my money

    i rented a movie and its not on my mav book pro and it took my movie

    Same questions as when you posted the same basic question before.
    urchased movie and its not on my mac book

  • HT1657 I rented a few movies and downloaded them to my computer.  Before they had been viewed, I updated my iTunes software and the movies were no longer in my library.  How can I access the movies as I have already paid for them?

    I rented a few movies and downloaded them to my computer.  Before they had been viewed, I updated my iTunes software and the movies were no longer in my library.  How can I access the movies as I have already paid for them?

    Try here >  iTunes Store: Transferring purchases from your iOS device or iPod to a computer
    iCloud doesn't support movies...
    iCloud backs up your:
    Purchased music, TV shows, apps, and books
    Photos and video in the Camera Roll
    Device settings
    App data
    Home screen and app organization
    Messages (iMessage, SMS, and MMS)
    Ringtones
    From here >  Apple - iCloud - Store and back up your content in iCloud.

  • HI. I have itunes 10.6.1.7. When I goto movies i am not able to add and when I click on add file to library and select the file and add its not getting added. When i goto Library it says  that movies I add are in library.Which I cant add

    HI. I have itunes 10.6.1.7. When I goto movies i am not able to add and when I click on add file to library and select the file and add its not getting added. When i goto Library it says "feature films and home movies you add to itunes appear in movies in your iTunes library. To play a movie, just double click it". And below are two options for Downloading movies from store and rent movies. Please help.

    I get the exactly the same problem with win 7, i rang apple support who suggested i try another machine/or create another account on my machine???? why should i, stupid ipad 3rd gen is now sitting here un syncable, apple support ....tut tut very poor support, its a shame im out of the 7 day period otherwise this ipad would be going straight back, older versions of itunes worked fine, some one must know a fix for this??

  • Can I move all my photo that I can see on iPhoto from my Mac hardrive and put them on an external hard drive and still be able to see them as thumbnails in iPhoto? Thanks! The reason, I need to know if I can do this is b/c I am running out of HD space!sp

    can I move all my photo that I can see on iPhoto from my Mac hardrive and put them on an external hard drive and still be able to see them as thumbnails in iPhoto? Thanks! The reason, I need to know if I can do this is b/c I am running out of HD space!sp

    Make sure the drive is formatted Mac OS Extended (Journaled)
    1. Quit iPhoto
    2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
    3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
    4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
    Regards
    TD

  • HT1933 Downloaded a movie and its not showing up in purchased

    I downloaded a movie and its not showing up in the purchased file

    It should be in your Library under Movies

  • Purchased movie and its not on my mac book

    i purchased a movie and its not on my mac book and it took my money

    Did you purchase it on your Macbook?
    Did you see it downloading?
    Where did you look for it?
    Have you tried Store>Check for Available downloads?
    Any info?

  • TS1702 i downloaded advance cinema app from tha app store, but everytime i click on a movie, it takes me to the IMDB website and im not able to watch the movie. The app promises 4000 free movies, but not able to watch any new movies...

    i downloaded advance cinema app from tha app store, but everytime i click on a movie, it takes me to the IMDB website and im not able to watch the movie. The app promises 4000 free movies, but not able to watch any new movies...

    I have found the issue. I have not found an answer to the prob. I have put in a case with customer service. If it doesn't work right, I need my money back!!!

  • I hve lost my MSVCR80.dll and am not able to download itunes again

    I have lost my MSVCR80.dll and am not able to open or download itunes. What are my options? I removed itunes thinking that i would start over and i am still encountering the same error message.         

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • Not able to see ikm oracle incremental update and ikm oracle slowly changing dimensions under PHYSCIAL tab in odi 12c

    not able to see ikm oracle incremental update and ikm oracle slowly changing dimensions under PHYSCIAL tab in odi 12c
    But i'm able to see other IKM's please help me, how can i see them

    Nope, It has not been altered.
    COMPONENT NAME: LKM Oracle to Oracle (datapump)
    COMPONENT VERSION: 11.1.2.3
    AUTHOR: Oracle
    COMPATIBILITY: ODI 11.1.2 and above
    Description:
    - Loading Knowledge Module
    - Loads data from an Oracle Server to an Oracle Server using external tables in the datapump format.
    - This module is recommended when developing interfaces between two Oracle servers when DBLINK is not an option.
    - An External table definition is created on the source and target servers.
    - When using this module on a journalized source table, the Journaling table is first updated to flag the records consumed and then cleaned from these records at the end of the interface.

  • Not able to see the crystal reports XI version in the IE 7 and IE 8

    Hi Team,
    I am using web based application developed in VB,ASP,SQL SERVER,Crystal Reports(XI). I am able to see the Crystal Reports in IE 6. But i am not able to see the reports in IE 7 and IE 8. While clicking on the reports button it is showing the  red X image top left cornor.
    I am using CrystalActiveX viewer11 version for viewing the reports.
    In IE 6,if the client using fiirst time for vieiwing the reports,it will ask the Activexviewer control prompt and says ok,it will display the reports.
    Thanks and Regards
    Eshwar

    Thanks your advise.But we are using following crystal reports (XI) version and we don't have CRXI with R1 and R2.
    CurrentVersion:11.0.0.895 ( CR Developer and Product Type:Full)
    Crystal Reportviewer11 configured in the IIS which is version (5.0). and configured the virtual folder to C:\Program Files\Common Files\Business Objects\3.0\crystalreportviewers11\.
    Our web application code also configured in the IIS at same level.
    When the user wants to see the reports through the application,it will ask the Plugin of Crystal Report Viewer and user will download this plugin and it will save in the IE plug ins.It will ask only first time viewing the reports for the next onwards it will not ask or prompt of the Activex control.
    So please suggest me, is there any upgrade version of this Crystal Reportviewer11 needs to be installed or any browser setting need to be configured for IE 7 and IE 8.
    waiting for your reply.
    Regards
    Eshwar

  • I'm using Iphone 5 .After updating it with the latest software i.e iOS 7.0.6 I'm not able to see the wats app and imsg on my notification until and unless i activate the "Show on Lock Screen" which was not same as in the earlier software version.Help plz

    I'm using Iphone 5 .After updating it with the latest software i.e iOS 7.0.6 I'm not able to see the wats app and imsg on my notification center when my phone is locked until and unless i activate the "Show on Lock Screen" under each application. which was not same as in the earlier software version.I dnt want my messages or watsapp msges to be displayed on home screen when locked but should be displayed on the notification center on lock condition.
    Please suggest a solution or @Apple please get a software release which can remove this bug .

    We aren't Apple, just users like you. Have you tried a reset? Hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss)

Maybe you are looking for

  • Editing Contrast / Brightness inside InDesign

    In Quark you can go and edit any image by right clicking an image going to Picture Effects then Adjusments followed by "Brightness/Contrast" . I was wondering if it is possible to edit images on the fly like that in InDesign and if so how? Messing wi

  • Row-Wise GROUP init block isn't creating the variable

    Hi, I have an Init Block to set the GROUP variable using row-wise initialization. When I log into Answers with a user, and then check the session variables from Admin Tool, I don't see the GROUP variable anywhere. It seems like the init block is not

  • Problem with using iPhoto and Preview

    I needed to resize a picture in iphoto. I opened it in Preview and resized it. At the top of the Preview window, where the file name is, I wanted to rename it so it would be easier to find. It let me do that. I closed the picture. When I went to open

  • HT201412 hi can you help with my sons ipod?

    hi can you help my sons ipod was working ok friday and was charging but my little son had hold of it and since then it wont come on or charge i have tryed to reset it but that hasnt helped it just has the empty battery sign on the front when you try

  • No me llegan notificaciones del correo

    Tengo configurado el correo en mail con varias cuentas, una de gmail y otra de ono y cuando recibo un correo no me avisa el centro de notificaciones, ni tan siquiera teniendo abierto el mail. ¿Aqué puede deberse esto?. Gracias