HT3209 low resolution videos playback with lines from left to right

When I play HD video's (720p) they play properly and just fine, when i play lower resolution videos (480) i see lines that run across from left to right in the middle of the screen, I can't find any settings to change to prevent that from happening. I would think if it was a computer problem it would have more trouble with the HD content than the SD content.
Does anyone know how to handle this?
Dell 2.0Ghz processor with 2Gb of RAM
Issue is only noticeable on SD videos (480p)

Similar Messages

Choppy video playback with airplay from Macbook Pro

I experience very choppy video using airplay towards my Airplay unit (3rd gen).
I am using a Macbook Pro (15" retina, late 2013 version) with these specifications:
- Intel Core i7 2.7 GHz.
- 16 GB ram.
- 768 GB flash/SSD.
...and so on. I have the Mavericks OS installed (10.9.1).
When I duplicate or extend the screen of the computer to my Apple TV it is chopping EXTREMELY much. I am not talking a little bit - but it is not even watchable. I thought that it could be the router itself as the connection is (probably, correct me if I am wrong anyone) is directed from the computer - to the router - and then to the Apple TV, which could make the router like a filter in the process. And if something would prevent the signal from reaching the Apple TV with "full speed" it could prevent the actuall image.
However, when I am using the iPhone 4S and streaming video (both video found in my phone as well as streamed TV from apps such as Magine.com) the image flows completely flawless. There are not even a touch of lagging. It flows perfect, just as watching a movie directly on the TV.
The networking hardware in the phone is slower than in the Macbook Pro retina (late 2013) - both for sending and recieving data. But still... my iPhone works better than the Macbook Pro for the Apple TV. Even though that the processing, memory, graphic and networking power is probably a thousand times faster in the computer... it still performs really bad.
I have followed some discussion threads here (https://discussions.apple.com/message/22051725#22051725 and https://discussions.apple.com/thread/5734226?tstart=0 just as a couple of examples). I have accessed my router (Netgear Gigabit EVG 2000) and increased the Wireless mode to "up to 270 Mbps. I have also followed the previously linked threads and disabled the WMM (in the QoS-section). I felt that this made a little bit of a difference...
...when I am mirroring the screen and scale down the resolution to match the AirPlay screen (full-HD, 1920 x 1080) it works okay, but still chops quite a bit almost all the time. But if I extend the screen and want to watch TV at the same time as I am doing something else on the computer - then it chops so that it is not even possible to watch.
This have to be something either with the Mavericks OS or with my network settings - can anyone help me...? It would mean A LOT!

Curious why you think it would be my network when the same network is being used by the iPad 3rd Gen and iPhone 5 and they both stream without issue. As far as the other items you mentioned, all devices are up-to-date with the latest firmware/software and the latest MacBooks do not have ethernet ports. Speedtests that I have conducted also indicate that bandwidth is not the issue as the results show that the speeds received from the router are quite impressive.

Sequence Settings when using low resolution video

I am going to create a project that will consist of DV 720 x 480 and some really low resolution video from digital still image cameras.
1. If I export as DV NTSC, what is technically happening with the video that is in my Sequence that is smaller than 720 x 480? Is it being stretched to 720 x 480?
2. If my project did not include the 720 x 480 video, would it be better if I adjust the sequence settings to match the size of the low resolution video?
Thanks.

#1: If you make a 720x280 DV NTSC sequence and insert the low-res video, how it appears in the canvas will be how it appears upon export.
#2: Depends on your intended output.

If I put a low resolution video on the new ipad, is it display in a small window or in full screen?

If I put a low resolution video on the new ipad, is it display in a small window or in full screen?

How about 240P ?
Type in Very Angry Cat......................looks like crap on my iPad3.................but most 640 and up look OK

Problem with video playback with iTunes

Several problems :
Problem with video playback with iTunes -
Since about a week, When I launch a video, it takes a long time to get started, then only the sound starts with no pictures - If I press pause then play the video is played normally. Did anyone face or heard about same kind of issue .
Problem with permission disk errors
After re-installing White Tiger and After I installed the last OSX 10.6.5 update
I found the following problem
Group differs on "Applications / Utilities / AirPort Utility.app / Contents / Resources / wanArrow.png", should be 0 instead of 80.
Last but not least :
My computer seems slow - I have 60gig free on My hard drive and I test my hard drive and everything seems all good .

What was the fix for this? Everything has sucked for my itunes video playback since the last major revision release.

I need to know how to delete downloaded videos and movies from iTunes when the instructions on the support page does not work. I have swiped the selections from left to right on the phone and nothing happens.

Hello.
I need help deleting videos, tv shows, and movies downloaded from itunes. I have followed the instructions to delete from the macbook, I selected the videos I wanted to delete and right clicked to delete. Nothing happens. When I double click on the video it still starts playing. I also followed the instructions to delete the videos from the iphone by swiping from left to right with nothing happening. I opened the videos on the ipad and there is no edit selection like in the instructions on the support page. Can you please tell me how to permanently remove this content so it doesn't try to copy from each device when I want to back up the Iphone and Ipad to my macbook. Thank you.

Hi Shawninglewood,
Welcome to the Support Communities!
The article below may be able to help you with this.
How to delete content you've downloaded from the iTunes Store, App Store, iBooks Store, or Mac App Store
http://support.apple.com/kb/HT5772
Cheers,
- Judy

Lighter line passing from left to right

Hi! What is the term which describe the white line coming from left to right in the windows 8.1 start icon from the bottom-left corner of the screen and how I can add this effect to an image, if it's possible? Thank you!

Ok, so I experimented a bit about what you're trying to do and here's what I came up with. I think the key is to create a key (no pun intended). Think of the black text as a cut out instead of text. Then you can place a particle emitter behind the cutout and create your inner glow. Here's what I did.
Create a white rectangle to serve as your "background". Create a text object and type your text. Color it black and then group it to the white rectangle. Name it "text".
Place a luma key on the text group and have it key out darker. Because you have black text and an all white rectangle, only the text portion will key out.
Create a new group and place it BELOW the text group. Call it "fx". Hunt through the particle emitters until you find one that gives you the kind of glow you are looking for. I liked the looks of the: Afterburner, Cool, and Embryo emitters.
Adjust the colors to the particle cells to the color(s) you want to use (I recommend not making it all white because then you're text just disappears against the white rectangle). I used the Atlantic Blue preset and liked the way it looked.
Then keyframe or use a behavior to move the emitter from one side of the text to the other to give it the move you want.
Hope this helps.
Andy

I am using pages designing a flow chart, question "I seem to have an issue with the arrows that you can add text to, it appears I can not move the point of the arrows up or down they only switch from left to right.

I am using pages designing a flow chart, question "I seem to have an issue with the arrows that you can add text to, it appears I can not move the point of the arrows up or down they only switch from left to right.

Last point...who archives? On my regular email page I now have the Archive icon to the left of my Delete icon which I would prefer was to the left, first in the line as this is the icon I use mostly. With Folders, my Sent and Trash lists, who needs to archive?
I can help you only with the placement of the icon placement -- if you right-mouse click on the toolbar, then select Customize Toolbar, you can move an icon to where you want it to be.

HT1430 Having reset my iPad via the settings route, the apple logo appeared on screen and the bar below it filled from left to right, then stopped. I can do nothing more: it will switch off, but when switched on again only the apple logo and filled line a

Having resent my iPad using the Settings route, the Apple logo appeared onscreen and a line below it filled from left to right. When full, the device did nothing. I was able to switch it off and back on, only to see the same Apple logo and filled line. Even pressing the ON botton for a few seconds did nothing. The device is now inert, and I cannot access it. Please help!!!

Reset iPad and continue with Restore.
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

Hi i am working with indesign on a book in hebrew. and the page numbering that i apply. showing from left to right insted of right to left. can you please help? thank you. iris

hi
i am working with indesign on a book in hebrew. and the page numbering that i apply. showing from left to right insted of right to left.
can you please help?
thank you. iris

Hi Shawninglewood,
Welcome to the Support Communities!
The article below may be able to help you with this.
How to delete content you've downloaded from the iTunes Store, App Store, iBooks Store, or Mac App Store
http://support.apple.com/kb/HT5772
Cheers,
- Judy

Make my movie clip move from left to right with arrow buttons.

Hi hope this is a quick one..
I have all the elements set up already so just need the
logistics of how i can acheive the following:
I have an arrow at the furthest left and furthest right of my
main flash movie. I then have a movie clip in the middle which has
indidivual images on a kind of long strip. When i click the left
arrow i want the movie to begin to move from the right to the left
and visa versa. I have achieved this with the keyboard left and
right keys so what i really need is to convert this theory for the
left and right arrow buttons?
var speed:Number = 4;
object_mc.onEnterFrame = function() {
if (Key.isDown(Key.RIGHT)) {
this._x = this._x+speed;
} else if (Key.isDown(Key.LEFT)) {
this._x = this._x-speed;
Any help will be greatly appreciated??
Thanks
Ben

use the getAscii() or getCode() methods of the key class. and
you can always use the trace function to check the values to be
used in your if-statement.

HT1600 I have an Apple TV 2nd Gen, iPad 2 and can't get the icon to appear when i swipe from left to right. What am I missing? I am able to get the 'Home sharing' 'user and password on my Mac.

I have an Apple TV 2nd Gen, iPad 2 and can't get the icon to appear when i swipe from left to right. What am I missing?
I am able to get the 'Home sharing' 'user and password on my Mac.
Also using IPad 2 I am able to get the ITunes to accept the user name and same password as the Mac.
However, the only way I can see the 'Home sharing; icon is in Music on the Ipad. When I tap on the Icon it asks for a password.
When I give the same password, it is rejected.
Help!!!!
Jaxxdiggs

Personally I think the iOS devices are poor at reconnecting - Airplay establishes that a link is available but when the iPhone/iPad has been away from the house and rejoins the network i think AppleTV already thinks it's connected with a different IP address and fails to recognise it has joined the network again with new credentials.
Something along those lines anyway.
I find that a combination of restarting AppleTV, router and iOS device tends to fix it, but not for everyone.
AC

How to Shift ToolBar(Search Box) From Left To Right

Hi All,
        I am trying to shift toolbar of Portal i.e Search Box from left to right.But it is not happening.How I do this?I do not want to upload PAR File also.
Please let me know.
Thanks,
Abhiram

Hi,
Follow this,
Import the PAR file into NWDS, the PAR you have downloaded is correct one, Now in the JSP folder, find ToolAreaView.JSP file, now find following lines of code in that JSP file
<DIV id="GroupElements" class="prtlToolAreaTaskCompAlign">
                    <TABLE border="0" cellspacing="0" cellpadding="0" >
                         <TR>
After this TR , add following code :
<td width="750">& nbsp;</td>
Thats it. With this your search field will be moved to right totally.
Regards,
Ameya
Edited by: Ameya Pimpalgaonkar on Apr 29, 2008 6:50 AM

Fading an Object in From Left To Right

I'm trying to simply have a "square" fade in from left to right. Kind of like a "wipe" transition. Using the Fade In/Out Behavior only allows the whole object to fade in from 0% to 100% opacity at the same time.
Anyone have any ideas on how I might accomplish this extreme quest of wizardry?
Thanks,
Ray

I'd like to add an alternative solution. Maxx's idea may give you more customization but my idea is a shade simpler: I'm not involving a true gradient, but feathering the mask instead.
Draw a mask around your object. It may need to be quite a bit larger than the object in question. You'll know that, once you start playing with.
Animate the mask's control points. I like to set the last keyframe first, where your object is completely visible. Then move the playhead to a prior point in time. Then set another mask keyframe. Now click on the upper right hand point of the mask, hold down shift, then select the bottom right hand point of the mask.
With these points selected, If you then click and drag on the line between these 2 points, the whole right mask edge should move as one. Peel this line all of the way left until your object disappears. If you push play now, the object should sort of "wipe on" from left to right.
One more thing: Mask feather. With the mask selected, the HUD should have mention of "Feather". You'll want to dial this up. But if your playhead is parked at the beginning of the animation or at the end, you're not likely to see anything. So move the playhead such that you're parked between your 2 keyframes, with the object about halfway exposed, then adjust the feather to your liking.
Again, here is where you'll need to determine if the whole mask needs to be larger because you really only want the object to be effected by this "growing right edge". You don't want to see the feathering on the other edges, probably.
Anyway, this is Just another way to skin a cat. Maybe this will help you out.

My screen displays a shadow from left to right, being darker on the left and brighter on the right. Any advice about how to change this would be appreciated.

My screen from the moment it starts any program appears to be shaded from left to right. The left hand side of the display appears to be darker than the right half of the screen. Can someone please advise what I can do to alter this. Have I pressed something I shouldn,t have? Or is there a problem with my display?
Any help would be appreciated.
Many thanks.

Does not sound too healthy! You should take it to the Genius bar in the Apple store. May need the hardware looked at...
It's most probably a backlight issue. Take some piccys of it while it isnt working now!!

HT3209 low resolution videos playback with lines from left to right

Similar Messages

Maybe you are looking for