HT3210 When I go to Java Preferences, the Java SE 6, 32-bit is installed, but when I work in Fireworks, I get the message, JRE 1.4.2 is not installed. How can I install it or what's the problem?

When I work in Fireworks, for some functions, I get the message "JRE 1.4.2 is not installed." I checked the Java Preferences and it shows "Java SE 6, 32-bit is installed" Does anybody knows what the porblem is or how I can install JRE? Thanks!

Disable the Skype extension for Firefox - both versions if you really have two versions installed.

Similar Messages

  • Imac frozen at blue screen after i went into disk utilities and cleaned my free space. I tried holding down T key as it reboots and i get a message. Start up disk full empty it how can one emptie it if you cant get past the blue screen

    Imac frozen at blue screen after i went into disk utilities and cleaned  free space.
    I tried holding down T key as it reboots
    and i get a message. Start up disk full empty it how can one emptie it if you cant get past the blue screen?
    to make matters worse we bought the IMAC of amazon uk on the 4/07/011 so what can we do?
    please remember how frustrating it is when asking for help when the helper telling you to type something on the screen when its frozen
    Tell us when you can type some instuctions to the software how do you get to the doss prompt so to speak to do this
    Thanks

    i tried all this thanks
    i can not get past blue screen and message Your disk is full it needs to be emptied Please not I cant proceed past this message.
    no matter what you tell me
    Am i right ok in thinking that
    when i went into disk utilities and chose to clean my free space i left it over one hour to do its stuff
    i came back and there was no progress bar just the box so i quit the program and when i opened  mac mail the system just froze  i forced quit mail rebooted and blue screen death
    Now when free space is being cleaned is it the same as windows dose the utility write lots of 0 on the hard drive then rebbot its self to free the space
    basicly is my hard drive full of 00000  is this why im getting this message  because the process was interupted
    I need to know if i need outside help i bought the computer on line on  amazon uk  what dose one do next

  • HT4101 When I connect my Nikon coolpix S9200 to the camera adaptor I get a message saying this device uses too much power, how can I overcome tis

    When I connect my Nikon coolpix S9200 to the camera adaptor I get a message saying this device uses too much power, how can I overcome this?

    You are probably seeing this message because the camera uses the same port to charge it. The iPad can not supply the power to charge devices from it's dock connector. Also if you use the SD card adapter you are not using up the camera's battery for transferring the photos.

  • HT204266 My $25 gift card has been used once. I have tried to use it and get a message it has been redeemed. It shows I have $23.71 left. "What is the problem?

    My $25 gift card has been used once. I hav tried to use it and get a message it has been redeemed. It shows I have $23.71 left. "What is the problem"?

    What is the problem? You only redeem it once.
    If it shows $23.71, then you still have credit.  Just buy something.
    Not sure what your issue is.

  • HT1918 i can not change the address from USA to Canada so i live in Canada now How can i do that? or if i can not change How can i delete an account and make the new account by use the same email address?

    because i can not use the Canadian card to redeem in my account from USA. should i delete an account and create the new one that should valid in Canada by using the same email address? or what should i do? (i really want to use my recent email)

    Hi Kazmania89,
    Welcome to the Support Communities!
    If you require additional assistance with this, click on the link below for guidance:
    Apple ID: Contacting Apple for help with Apple ID account security
    http://support.apple.com/kb/HT5699
    Once you are able to gain access to the old Apple ID, this article may be helpful:
    Using your Apple ID for Apple services
    http://support.apple.com/kb/HT4895
    I have purchased music, apps, or books with multiple Apple IDs. How can I get all of this content onto my iOS device?

    First, you need to copy all of your purchased content so it is on the same Mac or PC with iTunes. This computer should be the one you sync your device with. For more information on how to move your content, see these articles:
    Mac:  iTunes for Mac: How to copy purchases between computers
    PC:  iTunes for Windows: How to copy purchases between computers
    Next, authorize your computer to play content with each Apple ID in iTunes. Once your computer is authorized for all your content, it can be synced to your iPhone, iPad, or iPod touch. 
    Cheers,
    - Judy

  • After installing firefox version 31 I keep getting error messages that firefox cannot find some servers. How can this be fixed?

    I use Ebates. Now when I go to Ebates and choose a store, then the transfer to store website comes up and then an error message that firefox cannot find the listed server. I keep getting that message alot.
    On the frontier homepage there is an error message that firefox cannot find the ad server for yahoo.
    I was having problems with firefox so I did a reset firefox and then installed the new version 31.
    Seems it might be draggy or slow/sluggish. I like using Ebates. I contacted them and they said they were not having any issues at the moment. I contacted my antivirus provider and they said they could not detect anything either. Would a system restore get me back to the older version?

    You can try these steps in case of issues with web pages:
    You can reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
    *Hold down the Shift key and left-click the Reload button
    *Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
    *Press "Command + Shift + R" (Mac)
    Clear the cache and remove cookies only from websites that cause problems.
    "Clear the Cache":
    *Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
    *Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
    *Do NOT click the Reset button on the Safe Mode start window
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • HT1222 Just bought a ipad mini with retina. On my settings page its showing ios7.0.4 software update. "Estimating time remainin..." but doesn't seem to complete update. This message has been showing since last evening. How can I end or complete this opera

    I just bought an ipad mini with retina display. On my settings page it shows an update occurring for ios.7.0.4 with the message "Estimating time remaining..."
    This update and message appeared last evening but doesn't seem to complete. It also says "downloading", but nothing is happening.
    How can I complete the download or eliminate it?

    If it's slow on startup it would be extensions loading or LaunchDaemons starting up. 
    You should have a look in:
    /Library/LaunchDaemons
    /Library/Extensions
    You can count out anything in your home folder and it shouldn't put anything in /System as that's reserved for Apple. 

  • I have Windows 8 on my computer. I have Itunes 10 installed, but I cannot download Itunes 11. An error message says that Itunes has an invalid signature. Can anyone help?

    My computer has Windows 8. I keep getting an error message when I try to download Itunes 11----Invalid signature. Can anyone help?

    That suggests that the installer is getting damaged during the download.
    I'd first try downloading an installer from the Apple website using a different web browser:
    http://www.apple.com/itunes/download/
    If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?

  • I use Adobe lightroom to export images to Facebook - I am now getting error message related to this process address not understood- how to correct?

    I am using Win & Home edition / Mozilla Firefox on my HP laptop. On Oct 8 I used Lightroom to export images to Facebook. Now when I try to repeat this, authentication fails as The address wasn't understood
    Firefox doesn't know how to open this address, because one of the following protocols (lightroom) isn't associated with any program or is not allowed in this context.
    The export process was working, but isn't now. I have ben having problems with Firefox - I wasn't able to retain the settings for opening with my own Homepage (kept going back to Firefox default. So I have done a reset. Seems that this has somehow disrupted the authentication process. Can you help please.

    I just dropped into the forums to see if other people were getting the DVD burning verification error (Error code 0x80020063). I've been holding off on the Tiger to Leopard upgrade until very recently. All of my must-have apps were anecdotally stable and I was under the impression that 10.5 was too. Apparently reliable DVD burning is Tiger only, at least on my systems.
    We've been burning Taiyo Yuden DVD's almost daily with Tiger with incredibly low failure rates. After what seemed to be a smooth upgrade of a Mac Pro tower & 2 MacBook Pro laptops (one is a Core Duo and the other is a Core 2 Duo) I've spent the entire afternoon troubleshooting until I ended up here. Some searching on the board leads me to conclude that this will be a bigger headache than I imagined.
    I've done all the obvious stuff (varied the burn speed, moved the files to a different drive, reset PRAM & SMC, used a different account, deleted finder.plist, tried repairing the system with DU on the Leopard install disc and then I tried burning on different computers with different media). What I'm finding is that over 50% of my DVD's are throwing the error code during verification across 3 different models all running Leopard 10.5.2. CD burning seems to work as before (but we don't use this as much so ?). I saw that some people had posted that closing the finder window helped, but that didn't improve my overall failure rate. The DVD's appear (indentical byte size and item numbers) to be burned correctly and usable, but I need to be sure so I can't trust them.
    We need reliable DVD burning for our business and this is a real problem. I was going to trudge over to the Apple store, but it doesn't sound like there's a real fix yet.

  • Player skins - How can we best share them, what is the preferred method?

    MXML provides a format for interchangeability but am I right in assuming we need Flex to author/modify UI Look and Feel? Can we use Flash with MXML or Fireworks and import to OSMF, what is best practice please?

    Many thanks,
         In answer to your question, I would like to see true (2.5D (including a basic Z dimension feature for stacking elements)) multi-layer layouts exported straight from fireworks, this would allow the positions of elements to be shifted/tweaked after the initial player startup without the 'flattening' and de-objectifying the elements that simple 'cake cutter' bitmap exports will have.
         It will also allow fancy branding and a future for possible animation of elements such as visual skewing or zooming to suit different screen dimensions, this would give a "1 set of player gui elements" fits all screens/handsets feature and allow for 'inplay screen flips' for handheld users without loading 2 layouts.
         Rich media presentations, as opposed to simple video, will need everchanging player layouts and branding while playing the mixed media.
    HTH

  • I have an update for itunes raido 11.1.0 but cannot update error 3072 appears. don't care about itunes raido. how can I avoid it and what about the error that appears

    I have an update for itunes raido, but there is an error 3072 message and it wont update. Can I not update itunes raido 11.1.0? Don't want it. using Mac OSX 10.8.5

    See post by Kappy
    Error 3072

  • Downloaded 4.o firefox, my mac even tho it is osx,is not compatible,replaced the older version with new...now new won't run, old is gone.. want my older version back,bookmarks,etc...how can i restore ,or at least download the 3.6 i had before?

    have tried to recover files from hard drive,folders..etc...figuring the older version must be somewhere on my computer....but i haven't been able to locate it,or successfully download my old version

    Firefox 4 requires at least OS X 10.5 and an Intel Mac.
    * http://www.mozilla.com/firefox/4.0/system-requirements/
    You can look at:
    * http://www.floodgap.com/software/tenfourfox/
    Firefox 3.6.x can be found here:
    * http://www.mozilla.com/en-US/firefox/all-older.html

  • I have firefox 10.0.2 installed but everytime I open up firefox I get a message that says I am not currently using this version and I need to update to the latest version and why won't firefox support printing mac coupons

    my firefox info shows that I am using 10.0.2 but I keep getting a repeated message when I open it saying I'm not using the most recent version.
    Even tho the mac coupon printer says firefox supports this install it doesn't allow me to print it.

    Hi cleopt,
    You may see that message below the Google search box on www.google.com/firefox which is the old Firefox default home page. That page is no longer being maintained by Google.
    You should try changing your home page to:
    about:home
    If you don't know how to change the home page, you should take a look at the Knowledge Base article [[How to set the home page]].
    Hopefully this helps

  • Getting a message "Paper is too short to auto duplex" How can I correct this setting?

    Help section says to fix this problem on the front of the printer but there is nothing related to paper size there.

    turn the printer off. take out the paper and then reload the paper.  turn the printer back on.  fixed!

  • How can I install Photoshop CD version on to my laptop, but I don't have a CD imput

    I bought the hard-copy, CD version of Photoshop CS6 and I want to install it on to my laptop, however I have no CD input/player on/in my laptop. How can I install this? Is there anyway online?
    I have a Windows 8 HP laptop
    Please help!

    Yes. Just download the installer, no CD needed.
    http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html
    Go down the list and when you find Photoshop, click on it to show both Mac and PC installers in the language you need.
    Gene

  • How can I run 2 Dreamweaver windows at the same time?

    How can I run 2 Dreamweaver windows at the same time on my
    PC?
    basically I have 2 monitors and I want to edit CSS on one
    monitor and have the html page open on the other so I can quickly
    look from one to another with in a split second instead of taking
    that extra time to switch back and forth using the tabs at the top,
    I know I should probably invest into a mac so i can work out side
    of the Dreamweaver application window and I will in the future but
    is there any way i can do this on my windows XP pro PC?
    Thank you
    Maurice

    Open the CSS in DW, and use F10 to open the Code Inspector.
    Place the
    latter as needed.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "Random_Yggdrasil" <[email protected]> wrote
    in message
    news:gi2htb$j4j$[email protected]..
    > How can I run 2 Dreamweaver windows at the same time on
    my PC?
    > basically I have 2 monitors and I want to edit CSS on
    one monitor and have
    > the
    > html page open on the other so I can quickly look from
    one to another with
    > in a
    > split second instead of taking that extra time to switch
    back and forth
    > using
    > the tabs at the top, I know I should probably invest
    into a mac so i can
    > work
    > out side of the Dreamweaver application window and I
    will in the future
    > but is
    > there any way i can do this on my windows XP pro PC?
    >
    > Thank you
    > Maurice
    >
    >
    >

Maybe you are looking for

  • What programs are loaded onto the MacBook.

    I am looking at getting a MacBook sometime this upcoming weekend, and I was wondering what programs are loaded onto it?? And which ones are good for just basic usage (documents and internet)for now? I plan to get photoshop at a later date for photo e

  • Unable to install Moutain lion from Recovery Parition

    Hi Folks, Well running into some issues with my iMac. (27" i5, 1TB drive) Problem started when my two year old forced 2 CD's into the DVD bay. DVD was not happy and was making this horrible grinding noise. Went to Apple store which is 3 Hours away, t

  • X12 00502-204 validate instance failure when EDI file is in readable format in Visual Studio

    Hi, I have a n X12 00502- 940 edifile, when all data are on the same line, Visual studio validates ST*204*7629~B2**XXXX**159771**PP~.......N4G*L*43920*900**E*864~SE*33*7629~ when I try to make the file in a readable format, each segment on line by hi

  • How to Debug  ABAP/4 routine in Dynamic Selection?

    Problem:         I am not able to debug the ABAP/4 routine in data dynamic selection. Analysis:         I typed /H on  transaction command prompt. I entered to ABAP/4 debug mode. Then I am not  able to debug my routine. Give me solution for this prob

  • SAP Solman MMC is not opening

    Dear all, i have tried to open SAP Solman MMC, i got the below error . MMC cannot open the file c: \Documnets and  setting\user\Windows\sapmmc.msc. this may be because the file does not exit, is not an MMC console , or created by a later version of M