HT3226 Does a Mac mini need the dust removed from the fan internally?

Mac running slow gets very warm.

It can't hurt, but should not be a necessity. If your computer is running hot then it's unlikely the fan unless it no longer is running.

Similar Messages

HT201897 Does a Mac Mini purchased in the USA require a power converter for operation in Europe or should I only purchase a different power cord for it?

Does a Mac Mini purchased in the USA require a power converter to operate outside of the USA or can I simply purchase a different power cord for it?

Depending on which European country (should their mains access plug/port shape vary) the
cord set with correct ends on it has to match. You can buy a cord that plugs into the Mini
where the factory cord goes, and the other end has one for the wall source shape. The wire
for the application should be able to support 110~240VAC.
With the cord or an accurate image in hand, you could either get a new cable to match both
realities (mini + wall supply mains local) or an adapter (US/Standard to EU/Local) for just
the head or input part of the original Apple cable. One plugs into the other, then into wall.
If you have a new Mini with a small modular plug/port on the computer end of the power wire,
it would have only two holes and no ground; the other end would have two prongs of equal
shape and size. Not a polarized plug and not a grounded three-prong. To get a replacement
power wire for the MINI to go from power source to the Mini is recommended, if you are going
to be staying in one location for awhile. A Travel Kit that offers no electrical conversion but only
the physical shape adapter kit, should a available in travel stores, airports; big box discount
stores, computer and electronic stores. This page shows the cord end of the appliance shapes.
The other end would be the mains shape for whichever country you are going to....
http://www.signalandpower.com/European-Power-Cords/
So to match the country or regional power mains type is a primary concern for obtaining the
correct replacement cord to supply the Mini with local mains power. The end which plugs into
the Mini is of a certain type (numbers for EU and elsewhere are published, see link + images)
& the end that gets plugged into the mains or utility side, needs to match the local specification.
The link to Apple, to contact for Support and Service information in prior post, should be able
to help find a source for the local replacement type cord they'd sell local people with a Mini.
Apple local sources offer replacements for this purpose; and for travelers, a second cord for
a direct use (not adapter plugs) is a better bet. For those who only need a cord in two places.
If you are traveling to Denmark, UK, Swiss or other EU countries require different adapters.
Even places where the power itself may be somewhat similar. However your MINI has an
automatic power supply that will conform to that energy standard, you only need to supply a
correct non-transforming adapter. Simply a connection to adapt one shape to another.
The general purpose travel kit that is not specialized to Apple power adapters, would have a
plastic plug/adapter with the local pins on one side, and the US/standard two slots on the other.
So, no circuitry nor any other change of electrical power inside this device would be required.
http://www.signalandpower.com/2-Prong-Plug-Adapters/
http://www.signalandpower.com/Convert-to-Europe-CEE-716-plug/
http://www.signalandpower.com/Swiss-AC-Power-Cords/
In other words, I believe my other post already covered this. On the ground on either end of the
path, adapters are common and the Mini does not use proprietary electrical components IF you
have one of the more recent shape aluminum models with the power supply built in. The older
Mini has the power brick and two wires. A US/Standard plug adapter to EU/Local would work in
either case, since all you'd do is plug the adapter plug into the local mains and the US plug into
that one... I see these kinds of discards for as little as 25¢ in thrift stores in Alaska. Or you can
buy a new one. Or you could get a complete cord with correct ends on it, for Mini + local mains.
Hopefully this helps somewhat. The only info missing is which EU country or region is involved.
Their shapes of plug are different, so the adapter end for local supply has to match their standard.
Swiss, Denmark, UK, and others offer different shapes and so on.
The Apple store in the location you are traveling should be able to supply you with a replacement
cable for a modern MINI, that has the correct local mains end, and the correct Apple mini end on
the opposite. Since the unit is automatically switching, the magic is done.
Since I supplied a means to locate any number of Apple stores, authorized service providers &
other Apple related vendors in my earlier reply: https://locate.apple.com/country you could contact
any of them along your route in the City in whichever EU country, to find a local MINI power cable.
In any event, I'm done...
Good luck and happy trails...

Does the iPhone Remote control a Mac mini in the same way as ATV?

My ATV1 has packed in.
Rather than having my MBP switched on just to listen to music through a new ATV to my hifi I am thinking of using a Mac Mini in the same way as ATV1.
Does the iPhone Remote work with the Mini the same way as it does with the ATV or do you need to use a mouse and switch on the screen?

If intending to use the Mini s a home theater system,
you may want to consider getting Rowmote or Rowmote Pro
app for the iPhone and the companion app for the Mac.
Not only will you get Apple Remote functionality, but
you will also get trackpad and keyboard functionality
as well. This will make it even easier to navigate the
Mini on the TV.

I have a Symphonic 32' HDTV (Dolby Digital Plus). can someone help me figure out how to configure it optimally with my Mac Mini? the display and sound is off. Do I need drivers/software? I'm new to macs.

I have a Symphonic 32' HDTV (Dolby Digital Plus). can someone help me figure out how to configure it optimally with my Mac Mini? the display and sound is off. Do I need drivers/software? I'm new to macs.

Hello, since nobdy else has replied...
Long shot, but...
Open Audio Midi Setup in Applications>Utilities, see the input & output options & KHz setting there.

Do the Mac minis support using AirPlay and all of its functions? I thought I saw a comment yesterday that suggested the Mac mini (particularly the late 2012 models) does not support AirPlay. Thank you.

Do the Mac minis support using AirPlay and all of its functions? I thought I saw a comment yesterday that suggested the Mac mini (particularly the late 2012 models) does not support AirPlay. Thank you.

Hello,
AirPlay Mirroring
Requires a second-generation Apple TV or later. Supports the following Mac models:
iMac (Mid 2011 or newer)
Mac mini (Mid 2011 or newer)
MacBook Air (Mid 2011 or newer)
MacBook Pro (Early 2011 or newer)
http://support.apple.com/kb/HT5444

I have acrobat pro on my lap top and recently installed acrobat pro on my Mac Mini, but the text recognition function is not working, does anyone have any advice on how to remedy this problem?

I have acrobat pro on my lap top and recently installed acrobat pro on my Mac Mini, but the text recognition function is not working, does anyone have any advice on how to remedy this problem?

On my laptop when I open up a pdf file and do a search for a particular
text phrase it prompts me to run a character analysis. Whereas on my mac
mini, when I try to engage the same process it just says it couldn't find
the phrase and doesn't even try and run a character analysis. I tried
clicking on the tool bar and the recognize text tab but nothing there seems
to do anything.
In trying to figure out the issue on my own I noticed one thing. I run a
small law firm in St. Louis and I scan in all my files to which are
subsequently emailed to my outlook account where I will save them as pdf's
to their respective folders. On my laptop when I open up an email from my
scanner I see the image of a acrobat document next to the attachment
paperclip symbol. However, when I open up the same email on my mac mini I
notice instead of an acrobat file image it shows a Preview file image (the
program used to open up pdf's before I installed acrobat).
Hope this helps!
Sincerely,
Jonathan McAllister

Why does my mac mini's mouse show a pinwheel every time I hover over the date area? Also, sometimes the date shows up incorrectly.

Why does my mac mini's mouse show a pinwheel every time I hover over the date area? Also, sometimes the date/time shows up incorrectly. It started happening after I updated to OS X Mountain Lion.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Click the Clear Display icon in the toolbar. Try the action that you're having trouble with again. Post any messages that appear in the Console window – the text, please, not a screenshot.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into a message.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

I want to link my Mac Mini through my independent hifi system, which forms part of my home tv system which is the monitor I am using with the Mac Mini. The hdmi cable I am using comes from the receiver of the tv. I cannot get sound from the Mac Mini. Do

I cannot link my new MacMini with my TV's sound system. It's a Pioneer screen & receiver with an independent Pioneer Amp. The Mac Mini does not pick up the sound through the hdmi cable, so how do I get sound going through the MacMini so I can appreciate the music and films I want to hear. Do I need another piece of Apple kit? I have seen 'Express' on Apples web site. Surely I dont have to pay for this as well?
I used to have an Apple TV box which had a seperate audio connection from my Pioneer Amp and it worked great.
Help will be appreciated

The Mac Mini is going to be used for an Internet connection on the Pioneer Plasma/receiver so I can also play stored films from a seperate hard drive. The receiver has an HDMI connection which I have connected the Mac Mini too. the picture is fine, but there is no sound. I have checked the 'sound' settings on the Mac Mini and it registers the Pioneer PDP receiver is connected but states it has no audible connection?

I recently purchased a Mac mini with the Yosemite operating system, but I cannot find a driver that works for a canon MP 450 all in one printer.

I need a driver for a Canon MP 450 all in one printer to be used with a Mac mini with the Yosemite operating system.
Canon does not have a driver. Third party providers drivers do not work with "Yosemite."
Any suggestions?

Canon does seem to have a driver.... http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mp_s eries/pixma_mp450#DriversAndSoftware

Does 2012 mac mini get very hot when using logic pro

does 2012 mac mini get very hot when using logic pro

Are you saying that your machine does or is it an enquiry before buying ? I use a 2011 server model - well, it does get hot over a period of time, but I've very rarely heard the fan kick in, its a surprise when it does. As far as I know the casing has been specifically designed to conduct heat, rather than having any fancy grilles and so on, being so small in size. I haven't found it to be cause for concern, if that's any help.
Slidersson is in need of more cold showers.

Will 1.86ghz Intel Core Duo Mac Mini run the IPhone SDK?

I kinda asked this as a follow up in another thread. But I really should have asked it in a separate thread here.
Will a 1.86ghz Intel Core Duo Mac Mini run the IPhone SDK?
Additionally, it comes with 10.4 and IPhone needs 10.5.4 or better. Can I download and upgrade to 10.5.4 free from Apple or will I have to purchase the upgrade?
Jerry

The hardware is more than sufficient. You will have to buy 10.5 (Apple does not have upgrade pricing).

Why does my Mac Mini running on Mavericks so slow to start and load apps?

Why does my Mac Mini running on Mavericks take so long to start and load apps?

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports 'com.autodesk.AutoCad com.evenflow.dropbox com.google.GoogleDrive' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n\t(%s)\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/d;/(etc|Preferences)\//s/^\.\/[^/]+//p;' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| ","||kMDItem'${p[35]}'=");sub("^.."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / /{$0="'"${p[28]}"'"};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'Beac|caug|dead[^bl]|FAIL|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,[lps]*.conf,pam.d,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}* .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A1 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D23 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with "Model Identifier." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

How do i connect my new mac mini to the thunderbolt display

how do i connect my new mac mini to the thunderbolt displa, It arrives tomorrow?

It has a built-in Thunderbolt cable, see here: http://www.apple.com/displays/specs.html
So assuming your mini has a thunderbolt port (you said it's new so I assume it does), you'd just plug the display's thunderbolt cable into the mini's Thunderbolt port.

HT1554 Apparently, I don't know my "com.apple.smig keychain" password. And I'm in the middle of setting up my new Mac mini. I transferred data from my MacBook and what I thought was the password isn't working! Help!!

Apparently, I don't know my "com.apple.smig keychain" password. And I'm in the middle of setting up my new Mac mini. I transferred data from my MacBook and what I thought was the password isn't working! Help!!

Hello,
See if this helps...
Mac OS X 10.4 Help, I forgot a password in my Keychain
http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh1960.html
Mac OS X 10.4: Keychain Access asks for keychain "login" after changing login password...
http://support.apple.com/kb/HT1631
Resetting your keychain in Mac OS X...
If Keychain First Aid finds an issue that it cannot repair, or if you do not know your keychain password, you may need to reset your keychain.
http://support.apple.com/kb/TS1544

Does a Mac Mini connect to a G5

I have been working with the iPad, and I have a G5 Mac ..does a Mac mini connect to a G5

Which iPad/iOS on the iPad?
What OSX version on the G5?
An iPad 1 (only goes to iOS 5.1.1) will sync to a fully updated G5. That means OSX 10.5.8.
A later model, fully updated iPad will not sync since they require iTunes 11.1 and that requires OSX 10.6.8 or later which requires a Mac with an Intel processor.

HT3226 Does a Mac mini need the dust removed from the fan internally?

Similar Messages

Maybe you are looking for