HT3231 Can you see 2 or more screens at the same time on a Macbook?

If you know how to set up your Macbook so that you can view 2 or more screens at the same time on the display, please tell me the steps I need to take to do this.  Thanks!

Hi geniew,
Welcome to the Support Communities!
The link below will give you some pointers on how to customize the Mac.
Apple - Find Out How - Mac Basics
I believe what you are asking is how to change the size of a window so that you can see two applications side by side.   For example, open the Safari application, and drag the bottom right corner of the window to resize it, then quit Safari.  When you open the application again, the window will open in the smaller size you created.
Repeat for any other applications you wish, so that you can have windows open side by side.
Alternatively, you can switch between applications quickly as mentioned above in the link.
Quickly Switch Between Applications
The Mac makes it easy to have multiple applications — Mail, Safari, iTunes, Pages, iChat, iPhoto, and others — open at the same time. So how do you quickly switch from Safari, let’s say, to Mail?
Just hold down the Command key and press the Tab key (Command-Tab). Mac OS X immediately displays a mini-Dock with icons for each of your open applications. At the left side of the mini-Dock, you’ll see the icon for your current application. Next to it (and highlighted), you’ll find the icon for the application you last used. Each time you press the Tab key (without releasing the Command key), you can cycle through your open applications.
One more tip: You can also use the Left Arrow and Right Arrow keys to navigate your open applications.
Or, use Expose to manage multiple windows:
Apple - Find Out How - Mac Basics
I hope this information helps ....
Have a great day!
- Judy

Similar Messages

  • If you buy a film from itunes, can you watch it on multiple iPads at the same time?

    if you buy a film from itunes, can you watch it on multiple iPads at the same time?

    SerZak is correct. There is a ten device limit. Yoy would still have to be signed into the correct ID in order to sync the Movie, even if you do not use Automatic Downloads, so the 10 device limit would still apply.
    Your Apple ID can have up to 10 devices and computers (combined) associated with it. Each computer must also beauthorized using the same Apple ID. Once a device or computer is associated with your Apple ID, you cannot associate that device or computer with another Apple ID for 90 days. You can view which devices or computers are currently associated, remove unused devices or computers, and see how long before they can be associated with a different Apple ID from the Account Information page in iTunes on your computer:
    http://support.apple.com/kb/ht4627

  • Can you use two duetts on logic at the same time

    can you use two duetts on logic at the same time so i can have inserts

    tracktor wrote:
    can you use two duetts on logic at the same time so i can have inserts
    Before going ahead on this you should definitely check with Apogee as I think they do not recommend using their interface(s) in an Aggregate device.
    Maybe that's changed.. not sure.
    pancenter-

  • Can you be logged into two macs at the same time?

    can you be logged into two macs at the same time?

    Basically, yes. If there's some kind of issue, please describe it a little.

  • Can you run Edirol / Focusrite firewire interfaces at the same time?

    Hey Guys,
    I have an Edirol FA-101 but i'm just about to get a Focusrite Saffire (or maybe a Motu 8pre...haven't decided yet) and was wondering if I can run the 2 interfaces at the same time for more inputs...i know i can chain 2 of the edirol ones but i'm not sure if it works with different makes.
    Thanks

    so I actually did get myself a focusrite saffire pro 26 and it's pretty cool (apart from the focusrite computer side interface that seems to have a few bugs when you control by hardware...)
    I'm probably gonna get myself an octopre or a twintrack pro to make use of at least some of the extra digital inputs but for now I have the semi redundant Edirol FA-101 in my rack, if I can get the two working together then that's great!
    I have tried what you said and it did pair them together however it made a really awful noise when trying to record, just intense digital distortion and i'm not really sure why. I'm running it all from a macbook pro with only one FW port (that has the Saffire / Edirol / FW Hard drive / Liquid Mix running from it in that order) do you think this order is more the problem?
    Dave

  • Can you use sync on multiple computers at the same time? ie have someone else logged into your firefox account for you whilst you are also logged in

    I am trying to sign up to something but there is only a short window so was going to ask a friend to sign in at the same time using my account to try to sign up (with my password being saved into my firefox account)

    Hi. Yes, you can use Sync on multiple devices at the same time. I use it to keep my bookmarks in sync across my desktop and Android versions of Firefox.

  • Can you run 7 and 6.5 at the same time?

    Since one of the key features I use is missing in version 7 (duration of a selection) I'm wondering if I can somehow run 6.5 along with V7 and, if so, how this would be done.
    Thanks!
    Rusty

    I use both (6.5.2 and 7.0.3) on my Mac mini.
    You can only have one "install" of QT on the machine but you can use the QuickTime Player from both versions at the same time.
    Version 6.5.2 will run "on top" of the version 7 "framework". You'll have all of the "old" menus when you use it. But you'll also have access to the new H.264 video codec.
    Find a copy of QuickTime Player (maybe a back up or a different machine) and place it on your Desktop.

  • How can I Resize Two or More Shapes At The Same Time?

    I've got text over a rectangle over another rectangle. When I change my text, the size of the boxes needs to change and it's a drag ot have to do each one separately and constantly realign. Is there a way I can resize both of them at the same time tokeep the proportions the same?
    Or is there a way I can enter #s to resize, so I could just enter the same #s for each shape?
    Thanks,
    Amanda

    Here's an example of what Wyodor is referring to: text in shapes within another shape.. It goes one step further and adds the first shape+text into another shape but the concept is the same.
    OT

  • Can you have 3G and 4G toggles at the same time

    I have searched google/apple but can't find a mention anywhere that the 4G(LTE) toggle is possible to have as well as a 3G toggle.
    I have heard mention that the one usually replaces the other depending on the carrier plist (carrier update)
    i.e would adding "Enable3GSwitch" to the plist file show both toggles?
    In my current plist I can only see that the 4G toggle seems to be renamed from LTE i.e.
    DataIndicatorOverideForLTE is set to 4G.
    Obvioulsy find out if its possible to have both is needed before I rant and rave at Vodafone here in the UK.
    Thanks and Regards
    Jason.
    Message was edited by: Elfstones65

    Thanks Deggie very dissapointing think we need to get Apple to fix that somehow. I have used my phone a quite a bit today but not overly more than I used my 4s 100% drain of batter in 12 hours

  • Can you run Boot Camp and Fusion at the same time?

    Hi,
    I had boot camp installed on my mac pro and loved it. I decided to get greedy and install Fusion using the boot camp partition. The Fusion install went ok but then Microsoft started to get fussy. Every time I would do something on Fusion it would ask me to "Re-activate Windows" when I logged into boot camp. Maybe if I saw Fusion fully working I wouldn't want to run boot camp any more but I think I want to have the option to run either. Right now I only have 1 gig real memory on my mac pro and Fusion seems a little slow compared to native boot camp. Can I run both boot camp and fusion without having to buy two native copies of Windows XP pro? I don't want a "sensible" answer, I want an answer that takes into account how Microsoft treats this re-activation situation.
    I guess Leopard might make this all obsolete, but until then .....
    ... Flash Gordon

    You need to make sure to install VMware Tools into your virtual machine (while booted into Windows via Fusion). Once you do this you shouldn't have to continually activate Windows when going back and forth from Boot Camp to Fusion. I've seen this discussed over on the VMware Fusion discussion boards, so you may want to look there for more details.
    Also, if Windows starts telling you it's been activated too many times, you can call Microsoft and they'll give you an alternate activation key. The phone number is listed on the Windows error screen. I had to do it and they were very accommodating. I just told them I was running Windows in a virtual machine, and there were almost no questions asked.
    You don't need to buy 2 copies of Windows to run both Boot Camp and VMFusion.

  • How can I rotate two or more photos at the same time

    That´s what I do: I select various images and then apply a rotation, but only image rotates.
    I have tried too applying it to one image and "lift and stamp" to the rest,but this doesn´t work.
    Please, how can I do it?

    You have got a good answer from Claire, but if you are using a keyboard with a standard Spanish layout, you have to use SHIFT + [ to rotate to the right.
    You can also use ´ and ` (to the right of the letter P) to rotate the image. This is the location of the [ and ] on the US layout.
    If you use a Spanish ISO Layout on your keyboard, then you have to use ´ or ` since the [ is replaced by the º in the layout.
    You can also use the buttons for rotation in the Control Bar at the bottom of the window
    Regards
    paul k
      Mac OS X (10.4.8)  

  • Can you play two different MIDI instruments at the same time in Garageband?

    Hi all,
    I searched for a while but failed to find an answer so far: can Garageband allow you to play two tracks with two different midi instruments? When I plug my two keyboards, the 2 MIDI sources are recognized, but can only play notes on one track, not two different tracks! Is this a known limitation?
    If Garageband can't play 2 midi instruments on 2 different tracks, I guess that leaves me with Logic Express...
    Thanks a lot for any reply!
    Alex

    Correct. GB doesn't differentiate between midi channels, that's why you can't split them to two tracks (and GB only offers one recording channel for midi at a time).

  • Can you have SATA and PATA drives at the same time?

    Right now I have 2 PATA drives hooked up to the board. Is it possible to hook up a SATA drive that will be a non-boot drive for just storage purposes?

    You can havepata disks + Sata, with sata as boot or not, you just need to update the Hard disk boot order in advanced bios settings.
    luck

  • Can you run different processors in G5 at the same time

    Hey, I have a G5 dual processors, one 1.8 top and 2.0 bottom.
    Can I run them together in a G5?
    Both work properly.
    Thanks

    Well, I found out, in one way it works, but ultimately doesn't.
    With a 1.8 in the top and 2.0 in the bottom, the computer boot up to the startup hard drive but the fans amped up, I assume to avoid overheating.

  • How do i drag media to the menu screens in premiere elements 13? I can't see my audio files and the menu screens at the same time. In prior versions it was easy

    How do i drag media to the menu screens in premiere elements 13? I can't see my audio files and the menu screens at the same time. In prior versions it was easy?
    It is very cumbersome to "re browse" for audio files/pics/movie clips to add to menu screens. Certainly there is a way to view the media and menu screen at the same time so I can drag and drop?

    Jayhawk
    I think I know exactly what you are seeking and believe it cannot be done in Premiere Elements 11, 12, and 13 as it can be done in versions earlier than 11 where the Disc Layout and Project Media are viewed side by side.
    Premiere Elements 13 uses a Movie Menu customization workspace which is not allowing viewing of Project Assets in the Expert workspace at the same time.
    ATR

Maybe you are looking for

  • Help me in Doing my Final Year Project

    Dear All, I am studying BSc in Computer Science in American International University Bangladesh (AIUB), Bangladesh. I want to work with Java Card. Actually I want to complete my final year project in Java Smart Card. I want to develop a Smart Card fo

  • Can't install KB2528507

    Today I (auto) installed the latest of TVSU and found 3 MS KB items.  Two of those items installed properly (each requiring a reboot).  The third, KB2528507 failed to install.  I was given an opportunity to do a manual install and it too failed (not

  • Report RPLHZPT2 in CZ

    Hello togehter, my colleagues from CZ have problems with the standard report RPLHZPT2. I already created a OSS but I didn't know for what this report is used! Can someone explain me for which process this report is used in CZ? THX Thomas

  • Adobe air printing without asking print dialogue box

    hii is it possible create an air application for  printing a text file on the fly without asking print dialogue box... if so please suggest a way to do.. thankss saritha

  • Menu widget (horizontal) space between buttons

    How do I get spaces between navigation buttons on the horizontal menu widget? In the basic Katie video, she does this as a "pre-set". Then in the advanced video it shows up in the images with no discussion. Thanks for helping.