HT3231 how to find file after using migration

how to find files after migration has finished

If you don't have any file you need in your old account, open System Preferences > Users and Groups and delete the old user. If not, I recommend you to migrate your files of your old account to the new one using Shared folder or an USB drive

Similar Messages

I can't find my migrated files after using migration assistant

I can't find my migrated music folder despite the migration assistant saying it had been successful. After looking in system preferences > user groups I see no other account for me to access. This is my first mac, and therefore a complete novice to this system therefore any help would be gratefully appreciated. Thanks.

This is my first mac
Did you try migration from a Windows based computer?
If so, try this support article > iTunes: How to move your music to a new computer

HT4796 Finding files after using the Migration Assistant

I transferred my files from PC to Mac using the Migration Assistant and now I cannot find my files. I am a brand new Mac user. Help please!

Welcome to Apple Support Communities
Migration Assistant creates a new user with the migrated data. To access to this user, go to  > Log Out, and log in your new account, so you will find all your data. OS X will ask you which user you want to use every time you start your Mac

Don't have permission to access my files after using Migration Assistant with my PC?

The transfer took over 6 hours, so I would appreciate any help other than suggestions to just try it again! At first I couldn't find where Migration Assistant put my files, but I found them in /users/(Windows user name which is actually different than Mac username). Lion made that step a little tricky, since it doesn't seem too eager to navigate me to the root of my hard drive. The folder icons have red symbols in the lower right hand corner of them, and when I try to access them, I receive the following message: The folder “Desktop” can’t be opened because you don’t have permission to see its contents.
Any help is really appreciated!

Try holding alt or option key when starting iPhoto to choose a new Library.

Relocating music files after using migration assistant and time machine

Hello
I recently purchased an i7 MBP because my previous 15 in was stolen. Luckily I had a time machine backup of the old machine - my previous MBP was the Intel 2 Core Duo model just before the refresh to the i5/i7s
So far what I did is ran migration assistant to bring my files over
Everything seems to be fine, except when I got to iTunes much of my music is listed but I get the exclamation mark symbol next to most of the music and movies and apps
I am trying to figure out how to fix this and relocate my files
I know I could access my time machine backup by browsing other time machine disks, but I can't browse the music folder in a previous backup because I don't have the permisson to access it
Any suggestions would be greatly appreciated!!

Victor:
If you correctly transferred your music files the problem is with your iTunes Library file.
Open iTunes and quickly press the option key. A window will show to ask you to select the library file. Browse for it and it should fix the problem.

Unable to view files after using "Migration Asst".

I "migrated" my files from my old G4 to my new MacBookPro. Now I CANT VIEW my old files on my new Mac. I get a msg that says, "The folder “Pictures” can’t be opened because you don’t have permission to see its contents." The files all have a red-sign. This applies to all the files I had transferred.
What I've done so far: I tried renaming my old G4 to match my new MacPro, but it did the same thing above. Migration Asst makes it sound so easy, (and basically it was) to transfer files, but it appears to me that a new "account name" is automatically set-up for the migration. I just want ONE ACCT, and to be able to read the files that have been transferred.
What did I do wrong?
THANKS!

check this go to setting>>apps>>all>>camera>>clear data and restat your phone and watch
Do not forget to give kudosand to select the correct answer

Lost list of my wifi networks after using migration assistant / time machine

After using migration assistant / time machine to set up my new Mac I now miss the list of stored preferred Wlan/WiFi networks. So the passwords of wireless networks I. Used in the past are all gone.
Why is time machine not putting those on my new Mac as it does with many other settings?
How can I manually grab this list from my old Mac and out it on the new machine?
Will I find that time machine missed some other lists and settings as well?
Thanks for help.

I've been working through this procedure this week. It's pretty good, and when it works it appears to work quite well, but there's still some bumps in the road:
(1) Once you've migrated, Time Machine itself seems to be a little confused and future backups may fail. You might have to start again by changing to a new Time Machine disk on your new laptop. You may lose your older backups, it's not yet clear to me.
(2) You can't restore from a previous backup during the migration, only the most recent one. (You can restore from an older backup using tools on the install CD if you need to.) I suspect this won't be an issue for you.
(3) Migration Assistant once you've logged in a Migration Assistant while you're starting up a new machine seem to work slightly differently. For example, sometimes the newest copy of the applications in your Applications folder (say, iMovie) is preserved, sometimes it makes an exact restore of the old Applications folder even if it's an older version of the application.
Overall it's been a pretty good experience, and what you want to do does work, but be prepared for the possibility of some issues. I tried this back in 10.5.0 a few months ago and had a lot of problems, things seem better now under 10.5.2.
- Ert

How to find report values using report writer

hi,
Please help me.
How to find report values using report writer
Regards,
RRK.
Edited by: Alvaro Tejada Galindo on Feb 6, 2008 12:01 PM

Thanks all for the reply.
I am trying to solve a problem where report parameter value that is set at Management Console is wiped out after calling replaceConnection.
databaseController.replaceConnection(oldConnectionInfo, newConnectionInfo,
null,DBOptions._doNotVerifyDB);
We have to support changing database connection from a java utility
class. But once replaceConnection is called all existing static parameter values are lost. To fix this issue we thought of getting parameters and values before calling replaceConnection and setting it after replaceConnection.
Version is CS2008 SP3 - version 12.3.0.601
If there is any other option of fixing the original wipe out issue?
ParameterValues.getValues() didn't return value. I will try ParameterValues.getCurrentCalues() but the document says ParameterValues.getValues() is equivalent to the IParameterField.getCurrentValues() method unless it is empty, in which case it is equivalent to the IParameterField.getDefaultValues() method.
So getCurrentValues() may not work.

After using "migration assistant" from my old iMac to my new iMac, some tools stick while using Photoshop CS 6 Extended. My current operation system is 10.10 Yosemite. I was wondering if UN installing then RE installing CS 6 might solve the problem. If th

After using "migration assistant" from my old iMac to my new iMac, some tools stick while using Photoshop CS 6 Extended. My current operation system is 10.10 Yosemite. I was wondering if UN installing then RE installing CS 6 might solve the problem. If this is recommended, I would need complete instructions on doing this. I have there serial number for the product.

using migration assistant is problematic.
at this point yes, you should uninstall everything migrated, clean and then reinstall properly using the installation files.
cleaner: Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
installation files:
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 |12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.7| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.
window using the Lightroom 3 link to see those 'Important Instructions'.

How to find Software version using a copy of software without installing

How to find Software version using a copy of software without installing

How to find Software version using a copy of software without installing
See answer given by Ahmed
Right click on setup file and select properties and then details tab.
http://social.msdn.microsoft.com/forums/sqlserver/en-US/c5424ffa-ce98-4899-ac0d-97cbcac10029/how-to-get-versionbuild-from-sql-install-media
You can also open Mediainfo.xml to see information from Installation file
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles

How to find Port numbers used by RMI application

Hi, hope u all find me a solution, how to find port numbers used in the RMI application, that is port number which the RMI application communicates between RMIserver and RMIclient. ur answers would b highly appreciated

Currently RMI transport layer does not directly expose any public methods to get the listening ports of the exported RMI objects, but the application can always export RMI server objects at certain designated ports instead of relying on the RMI runtime by specifying them to UnicastRemoteObjcect at the time of exporting.
RMI transport layer try to optimize the number of listeing sockets by exporting all RMI server objects on a single port if no explicit ports were chosen. If the application is really interested in knowing the listeing ports, it can always specify the client and server socket factories to be used for creating Socket and ServerSocket to the RMI runtime at the time of exporting. When a RMI server object is exported, but the listening socket is not yet created, RMI transport layer invokes the createServerSocket(host, port) of server socket factory by passing the host and port details. If no explicit port is specified, underlying socket implementation choses anonymous port. At this point of time application can log these listeing ports to some log file.
Similarly when the stub to the remote object is de-serialized in the client address space, it does also contain the client socket factory along with the end point details (host, port and server object ID). RMI runtime in the client address space needs to establish connection with the remote server object, it try to get the socket from client socket factory by invoking createSocket() on the client socket factory. Now the application can call getLocalPort() on the socket before returning it to the RMI transport layer.
There is a undocumented class RMIStat to dump RMI runtime state information. It provides a lot of static methods to dump RMI state information like object table, transports, threads etc. You can download the source code of this utility from RMI archives, but remember this is not a comman-line utility, you must invoke these static methods as part of the application code.
-- Srinath Mandalapu

Why is there no data on my new MacBook Pro after using Migration Assistant?

Last night I launched Migration Assistent between my MacBook to my MacBook Pro. It said it would take 12 hours so I left it over night. When it finished this morning it said that some files were not able to be transferred. But there is absolutely nothing on my new MacBook Pro. Why is that?
My TimeMachine backup disk has a cable that won't work with the new MacBook Pro so what other choice do I have to transfer data?

epicsnow wrote:
Last night I launched Migration Assistent between my MacBook to my MacBook Pro. It said it would take 12 hours so I left it over night. When it finished this morning it said that some files were not able to be transferred. But there is absolutely nothing on my new MacBook Pro. Why is that?
See Problems after using Migration Assistant

How to find process chain using background job in sm37

How to find process chain using background job in sm37

Better is to select the job.
Select (Define) Step (s) or F6.
Select the line and Menu Goto>Variant.
The variant contains the name of the CHAIN and its VARIANT.
Success
We faced an old job and via job monitoring we were informed about a cancelled job every 'interval'.
We noticed that the related chain was deleted but still the job was scheduled each interval again and was cancelled because an event was missing
We could not find the scheduled job via SM37.
Via view V_OP, view over tbtco abd tbtcp, we find the related entry.
We delete these entries via function BP_JOB_DELETE....
Edited by: Jack Otten on Jul 9, 2010 2:50 PM

How to find files and subdirectories in a directory

can anyone tell me how to find files and subdirectories in a directory .

Here's a code snippet,
http://javaalmanac.com/egs/java.io/TraverseTree.html

What do i need to do to find myiphone I have the app in my computer, but I don't know how to find it or use it.

How do I use the find my phone app to find my phone?
what do i need to do? I have the app in my computer, but I don't know how to find it or use it.

To use Find my iPhone on a PC or Mac, open http://www.icloud.com, login with your Apple ID and choose Find my iPhone. There isn't an app for Mac or PC

HT3231 how to find file after using migration

Similar Messages

Maybe you are looking for