HT3231 I have a new iMac OS X version 10.8.5 and a 12 year old iMac OS X version 10.4.11.
I have a new iMac OS X version 10.8.5 and a 12 year old iMac OS X version 10.4.11.
I wish to transfer Quicken and iPhoto from the old to the new.
I tried using wired Migration Assistant and received error message.
So following directions for alternate methods I used a flash drive. It seemed to work but I received error message to the effect that the PowerPC G4 is not compatible with the new system with 2.7 GHz Intel Core.
I discissed by phone with Apple service rep who indicated that it is true that this transfer is not possible.
But this HT 3231 article seems to say that it is possible. Any suggestions?
Properly configure the flash drive:
Drive Partition and Format
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to APM then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Apply button and wait until the process has completed.
Copy the files from the old machine to the flash drive. Then plug the flash drive into the new computer. Copy the files from the flash drive.
You need to understand that the files are no likely to be compatible which means you may not be able to use them. But the above process will transfer the files properly.
Similar Messages
-
I recently bought a new iMac and am giving my old iMac to my brother. I read up on how to erase my information before handing it over to my brother but they process included having my installation disk. I do not have that disk. I need to erase my information and upgrade the computer.
"Tiger Tiger burning bright ..." (sorry for the poetic diversion ...)
You can call Apple Customer Support, give them the serial number of the unit and pay $16 per disk to get new copies. But they may not re-burn Tiger anymore.
If that is the case, you have to consider buying Tiger disks from an online store, or move up in the cat family.
Leopard disks only require PPC processors, and run $180 or so. Apple *may* have some Leopard in stock if you call them. Else you go online.
If the sysem has Intel processor, you can jump up to Snow Leopard, which is $29 in the Apple Online Store.
AppleMenu > About This Mac ... what is the memory amount and processor type? -
We have a 4 year old iMac 24 inch. The hard drive died and we had a new hard drive installed. They only installed the Snow Leopard OS on it, and there were many software programs that came with the iMac originally.. now missing. Does anyone know whether Apple will resupply these? I do have an Apple installation disc but have upgraded from the original Leopard to Snow Leopard... so the OS is not quite the same. Ideas? Thanks!
No bootable bakup/clone or Time Machine backup? No initial install discs? If no to both of those, call 1-800-MY-APPLE and request replacement discs for that machine. They're available for a nominal S&H charge.
-
I just purchased a one year old iMac. How do I create a brand new admin account?
I just purchased a one year old iMac. How do I create a brand new admin account?
The first thing to do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. You—not the original owner—must do that. How you do it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
It's unsafe, and may be unlawful, to use a computer with software installed by a previous owner.
1a. If you don't own another Mac
If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller—not from eBay or anything of the kind. If the machine is very old and has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for a MacBook Air. You should have received those media from the original owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To start up from an optical disc or a flash drive, insert it, then restart the computer and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
If the machine shipped with OS X 10.7 or later, you don't need media. It should start up in Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
Some models shipped with OS X 10.6 and received a firmware update after 10.7 was released, enabling them to use Internet Recovery. If you have one of those models, you may not be able to reinstall 10.6 even from the original discs, and Internet Recovery may not work either without the original owner's Apple ID. In that case, contact Apple Support, or take the machine to an Apple Store or another authorized service provider to have the OS installed.
1b. If you do own another Mac
If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to prepare a USB device, then start up the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can start from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
2. Partition and install OS X
If you see a lock screen when trying to start up from installation media or in Recovery mode, then a firmware password was set by the previous owner, or the machine was remotely locked via iCloud. You'll either have to contact the owner or take the machine to an Apple Store or another service provider to be unlocked. You may be asked for proof of ownership.
Launch Disk Utility and select the icon of the internal drive—not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
After partitioning, quit Disk Utility and run the OS X Installer. If you're installing a version of OS X acquired from the App Store, you will need the Apple ID and password that you used. When the installation is done, the system will automatically restart into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
Then run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the original owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed—you have to repurchase them.
3. Other issues
If the original owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're irrevocably linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.
When trying to create a new iCloud account, you might get a failure message: "Account limit reached." Apple imposes a lifetime limit of three iCloud account setups per device. Erasing the device does not reset the limit. You can still use an iCloud account that was created on another device, but you won't be able to create a new one. Contact iCloud Support for more information. The setup limit doesn't apply to Apple ID accounts used for other services, such as the iTunes and Mac App Stores, or iMessage. You can create as many of those accounts as you like. -
New Mac Mini slower than my 4 years old iMac
My Intel iMac (20" display) four years old is out of order (I think the Power Supply was gone), and I bought the new entry level Mac Mini.
When I started using it I noticed that it's much slower in several tasks than my old iMac (when restarting, when opening applications, when working with an app with another appl in the background, etc. etc.). I was concerned about this, but then I asked some friends that have Mac minis and they said that it's normal.
Why? Why a computer with a new i5 Intel processor can be slower than a four years old iMac Core 2 Duo? Is it because of the slow drive (5200 rpm)? Or what is the explanation? If this is normal for the mini, I'll try to fix my old iMac as soon as possible.Don't downgrade to Lion. For what it's worth, my experience with Lion and Mountain Lion has been almost the exact opposite than what CaptH reported: I find ML to be much faster and more reliable, both on my late-2012 Mini and my mid-2007 iMac.
Your perceived speed issues are almost certainly a result of the slower-spinning hard drive in the Mini as Shootist007 pointed out earlier. Go ahead and disable Spotlight if you want to, but once the indexing is complete (which can take a few hours – or even a few days if you have a lot of data) it shouldn't be a problem unless you are continually connecting different large external drives.
Get the latest Combo Updater and install that. If you have some minor OS issue, that should solve it. Do a normal Software Update / check the Mac App Store for updates after you install the Combo Updater. Get it here:
http://support.apple.com/kb/DL1640
If you continue to be bugged by the slower speed, see if your local Apple Store will allow you to exchange it and a little extra money for an equivalent model with a Fusion Drive. Or go to Other World Computing and purchase their kit to add a second drive, and use it to add an SSD in the second drive bay:
http://eshop.macsales.com/item/OWC/DIYIMM11D2/
http://eshop.macsales.com/search/OWC.INSTANT.481.2
Also, RAM is super-duper-uber-cheap right now. If your Mini has only the stock 4gb of RAM, you might be pleasantly surprised by the improved performance by doubling that. I have 16gb in my Mini, it cost me well less than a hundred bucks, and it makes everything better including graphics performance. But if you don't do something to work around that slow 5400rpm hard drive, it will always be the bottleneck in your system. -
My four year old iMac is running much slower than when it was new. Does anyone have any suggestions on what I can do to "clean it up" and get it running like it used to?
What year, screen size, CPU speed and amount of RAM installed?
To find out info about your system,
Click on the Apple symbol in the upper left of the OS X main menu bar. A drop down menu appears.
Click About this Mac. A smaller popup window appears. This gives you basic info like what version of OS X your iMac is running, the speed of your iMac's CPU and how much RAM is installed.
Click on the button that says More Info. A larger window appears giving you a complete overview of your iMac's hardware specs.
Highlight all of this info and copy/paste all of this into another reply to this post, editing out your iMac's serial number before actually posting the reply.
This will tell us everything about your iMac so we may begin to help with your iMac issues.
How full is your Mac's hard drive?
Locate your iMac's hard drive icon on the OS X desktop. Click the icon once, then use the keyboard key combination Command-I. This will give you additonal info about your iMac's internal hard drive.
Post this info in your reply here, also.
Here are some general tips to keep your Mac's hard drive trim and slim as possible
You should never, EVER let a conputer hard drive get completely full, EVER!
With Macs and OS X, you shouldn't let the hard drive get below 15 GBs or less of free data space.
If it does, it's time for some hard drive housecleaning.
Follow some of my tips for cleaning out, deleting and archiving data from your Mac's internal hard drive.
Have you emptied your Mac's Trash icon in the Dock?
If you use iPhoto, iPhoto has its own trash that needs to be emptied, also.
If you store images in other locations other than iPhoto, then you will have to weed through these to determine what to archive and what to delete.
If you use Apple Mail app, Apple Mail also has its own trash area that needs to be emptied, too!
Delete any old or no longer needed emails and/or archive to disc, flash drives or external hard drive, older emails you want to save.
Look through your other Mailboxes and other Mail categories to see If there is other mail you can archive and/or delete.
STAY AWAY FROM DELETING ANY FILES FROM OS X SYSTEM FOLDER!
Look through your Documents folder and delete any type of old useless type files like "Read Me" type files.
Again, archive to disc, flash drives, ext. hard drives or delete any old documents you no longer use or immediately need.
Look in your Applications folder, if you have applications you haven't used in a long time, if the app doesn't have a dedicated uninstaller, then you can simply drag it into the OS X Trash icon. IF the application has an uninstaller app, then use it to completely delete the app from your Mac.
To find other large files, download an app called Omni Disk Sweeper.
Download an app called OnyX for your version of OS X.
When you install and launch it, let it do its initial automatic tests, then go to the cleaning and maintenance tabs and run the maintenance tabs that let OnyX clean out all web browser cache files, web browser histories, system cache files, delete old error log files.
Typically, iTunes and iPhoto libraries are the biggest users of HD space.
move these files/data off of your internal drive to the external hard drive and deleted off of the internal hard drive.
If you have any other large folders of personal data or projects, these should be archived or moved, also, to the optical discs, flash drives or external hard drive and then either archived to disc and/or deleted off your internal hard drive.
Good Luck! -
I'm in need for a thunderbolt display before December. My old Imac is like new (don't want to invest in a new Imac yet). Can I connect the thund-D to the old Imac via USB for the time being?
Their are some display adaptors you can get. I have an older Mac Pro with DVI but my monitor is a Thunderbolt Display. This used to be around $250. It is way cheaper now.
http://www.bhphotovideo.com/bnh/controller/home?O=&sku=810627&Q=&is=REG&A=detail s -
Just purchase new iMac and migrated. I want to strip my 2 year old iMac of personal files and photos and take to my office. Is there a simple method? Thx
The simplest way, is to erase the drive and reinstall the OS X.
Mac OS X v10.6 Snow Leopard: How to Erase and Install
Other than that, you will have to trash all your User files, delete all the photos from within iPhoto and then empty the trash. -
I have a new Mac Mini and a 7 year old Mac monitor. The connectors don't match. What to do?
I have a new Mac Mini and a 7 year old Mac monitor. The connectors dont match. What to do?
I suspect the monitor has an ADC connector
http://en.wikipedia.org/wiki/Apple_Display_Connector
If so you need one of these:
http://www.amazon.com/Apple-DVI-ADC-Display-Adapter/dp/B00011KHT2/ref=cm_cr_pr_p roduct_top
Otherwise what connector is on the monitor? -
I have a new Iphone 5, my wife has a 4S and an iPod Touch. When I sync my new 5 to the Mac, it pick up ALL of the stupid game apps that my wife uses on her two devices. How can I keep them separate?
go to itunes preferences, store, uncheck automatic downloads. also when your phone is connected you can click on apps and only check the ones you want on your phone, go down to the bottom right and click apply.
-
I have a new computer. I wish to uninstall Lightroom5 and photoshopCC on old computer and re-install on new computer. How do I do this. Also, Lightroom catalog is currently on external drive. Will Lightroom recognize it on new computer
Hello Francinera,
please have a first look here: Activation & deactivation help >>> http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html.
Please come back if necessary.
Good luck!
Hans-Günter -
i have a 2004 30gb ipod colour.....it was previously set up so i could manage the music on an old mac book pro g4.....i now have a new mac book pro, but i cannot get the music from my old ipod on to my mac......how do i do this???
See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your Mac and into iTunes.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
Once you have successfully done that you can go ahead and choose Erase and Sync when you plug your iPod in.
B-rock -
I have a one-year old iMac and Safari will NOT remember bookmarks I try to add. Any suggestions?
I have a one-year old iMac and Safari will NOT remember bookmarks I try to add. Any suggestions?
Launch the Terminal application by entering the first few letters of its name into a Spotlight search. Copy or drag -- do not type -- the line below into the Terminal window, then press return:
ls -Oel Library/Safari
Copy any lines of output that appear below what you entered and paste them into a reply to this message. -
Have a 2 year old imac and the email will not send as it is stuck on drafts file
have a 2 year old imac and the email will not send as it is stuck on the drafts file -- any ideas please?
As Stated... The iPad 2 does not offer this Feature.
iOS System Requirements > http://support.apple.com/kb/HT3574
Understanding > http://support.apple.com/kb/HT4517 -
3 year old iMac 24 running OS 10.7.4. After it has been on for a day or so, it stops going to sleep and becomes very slow. This only happens when Safari is running. Quitting Safari solves the problem. Has anyone else have the same problem? Does not happen on MacBookpro only on iMac.
Hello Albert, see how many of these you can answer...
See if the Disk is issuing any S.M.A.R.T errors in Disk Utility...
http://support.apple.com/kb/PH7029
Open Activity Monitor in Applications>Utilities, select All Processes & sort on CPU%, any indications there?
How much RAM & free space do you have also, click on the Memory & Disk Usage Tabs.
Open Console in Utilities & see if there are any clues or repeating messages when this happens.
In the Memory tab, are there a lot of Pageouts?
Maybe you are looking for
-
I just bought a new ipad and shared my documents in Pages from the old ipad to my cloud, but the only documents showing on my new pad is the ones that was not in folders. Have I lost my documents for ever?
-
Put logo in ABAP list/smallest font when sending to spool
Hi Gurus, I have a requirement. I did a ABAP list, not ALV, classic one, I also send it to spool and then convert to pdf and download to pc. Now our customer wants a logo for it, also as the report is long, when print it or downloading it to pdf, som
-
Has anyone implemented a loopback using PI 7.1 ? I have a case wherein the WSDL supplied has a 3-level external references which the Service Interface is unable to resolve. I will need to request the external team to rewrite the WSDL for PI but until
-
Overlap with payment run in SAPF110S
Scheduled F110S in background job, but the job is throwing the following error : "Log for payment run for payment on 29.07.2008, identification ABC Overlap with payment run 27.06.2008 64GT1 ... the execution of the payment program is terminated" Plea
-
Hiii I have made the changes in the inbound func modiule. The user exit is being triggered and the the internal table in that exit t_idoc_data is beinf updated i have modified it. value is there i it. i have chekd during debugging but in we02 the va