HT3235 I just bought a Micro-DVI to video adapter to try and hook my MacBook Pro 13" I bought mid 2009 to my old TV, the adapter doesn't seem to fit any of the connections, is this the right adapter?
I just bought a Micro-DVI to video adapter to try and hook my MacBook Pro 13" that I bought in mid 2009 to my old TV (svideo), the adapter doesn't seem to fit any of the connections on my macBook pro, is right adapter?
Shootist007 wrote:
Apple doesn't offer a MDP to AV or componet connect . Only DVI and VGA. They also don't offer one to HDMI. You have to go aftermarket to get one to HDMI.
Quite right, but as the OP does not have component or composite connections not important.
To the OP, this does work, but is not the cheapest, and as it appears that Apple no longer sell an SVideo adaptor cable 3rd party it will have to be.
Similar Messages
-
I Have a new mac book pro with OS X 10.9.5 and now my CS4 is Not Working anymore. It tells me to Contact Adobe Support regarding the licence - but that Seems impossible. Any idea how to solve this?
Use the web chat and just be patient.
Mylenium -
i just update my iphone 4s to ios 7.0.4 and update my macbook pro to ios maveric. Now, my iphone 4s does not sound form the speaker and the volume button up and down also does not work.I could hear the sound through the earphone. Also the airplay disapear. Please advice how to downgrade to the previous OS
Please try going to your settings area of your display. Click on General and go to 'reset all settings'
Good luck! -
Why every time I plug my phone in using a USB cord or charger does it say "charging not supported with this accessory"? The phone will charge if I leave it plugged in long enough, but I noticed that it doesn't hold the charge like it used to. Is this the battery, or something else?
Hi CJ-
There are some chargers designed for thr original iPhone that are not compatible with the 3G and later models. Are you using the USB cable that came with the 3G? That cable, when plugged into a computer USB port, or, when plugged into the power cube / wall outlet, should charge the 3G just fine.
Due to the nature of Lithium Ion batteries, there are safeguards in place to prevent the wrong type of charger from supllying charge voltage to the batteries, and if the proper pins and resistance is not detected by the phone, the circuitry will block charging and give that message.
Therefore: If you are using a 3G compatible (oem, or otherwise valid charger), and you're seeing that "not supported" message, it could be the cable you're using, or it's the phone/circuitry detection in the phone that detects the cable / charger type.
And, if you are getting some charge, but it's not holding very long, it could be that it's a 3G, and the lifespan of the battery is near end of life. The fact that you're getting a charging not supported message is probably of more importance as to why the battery is not fully being charged. -
The iPad doesn't seem to show any videos including videos I own or you tube videos own
I Have an iPad air that has stopped displaying video whether owned by myself or brought in from you tube
There's probably about a 50, but photostream only uploaded 22. AND, they're within the last 30 days.
I did a reset on icloud and i'll try it again when I'm off work. Thanks for replying....you're the only one!
Hopefully it works! -
Sometimes it will stay at the apple screen and sometimes it just shuts back off. The battery is fully charged.
ashleymay wrote:
I'm pretty sure it's mountain lion. Neither of your links worked tho, but thanks for trying! I'm new to Macs and only really know the basics of how to use it. When I power on and hold the option key I can chose to recover my Mac. What will that do? Will I lose pictures and stuff? I just went to Mexico and all my pics are on there and I'd hate to lose them, also lots of pics of my little boy.
Hmmmm, they are both working for me. What happened when you clicked on the links? Any error messages? -
I bought PS Elements 12 and Premier as a package but the Premier does not seem to have downloaded...All I have is the "READ ME" pages and no programme
Noel elliot
What is your computer operating system, and is it 32 or 64 bit?
At this time, is Premiere Elements 12 listed in Control Panel/Programs as an installation product?
Where did you purchase this Photoshop Elements 12/Premiere Elements 12 bundle - from Adobe as an online download or from an authorized reseller offering the box packing with installation discs? From your "The download doesn't seemed to have worked", I am assuming that this was an online download from Adobe.
On your computer, you should have started with 4 installation files
Photoshop Elements 12. An .exe file and .7z file specific for Photoshop Elements 12...and file targeted appropriately for 32 or 64 bit computer.
Premiere Elements 12. An .exe file and .7z file specific for Premiere Elements 12...and file targeted appropriately for 32 or 64 bit computer.
You double click the .exe first and afterward as indicated .7z.
Each of these products will have its own serial number.
Do you now have those components. If not, then you need to start again with the download to get those files on your computer in order to start the product installation.
Please review and consider. Any questions or need further clarification, please do not hesitate to ask.
Thank you.
ATR -
My macbook pro does not print through my PC to my EPSON RX 500 after loading OS X 10.7.4. It shows on the print queue "error" However, it will print if I directly connect my laptop to this printer via the USB connection. Any ideas?
It's all about setting up what ever version of windows you have running on your pc to share the printer. If you still get stuck post in a windows forum for help.
-
I am trying to hook my MacBook Pro to a Sony Bravia TV via DVI to HDMI cable and the TV will not recognize the signal. I have used the same setup with three other TV's, each a different brand with no problem. Any ideas?
Is the TV set to take input from the HDMI connection?
On your computer, if you open the Displays preferences and do not see an Arrangement tab (or there is an Arrangement tab that shows only a single monitor) then there is something physically wrong with your connection. Try clicking Detect Displays just to see if the computer can now sense the presence of the connection. Check your connections.
If you do have an Arrangement tab, and it shows two screens, then click Gather Windows to bring the TV's Displays preferences on to your main screen if the TV is not yet showing an image. Set the proper resolution (probably 720p, 1080i, or 1080p). Set the refresh rate (probably 60Hz) if that preference is shown. You should see a picture at this point. I recommend turning off mirrored displays if it is enabled. -
i have a late 2011 macbook pro i want to reinstall os lion 10.7 so when i reboot hold down options key click on recovery hd then in the os x utilities screen it says reinstall mac os x is there any way i can save this download so i can burn to dvd
steve359 wrote:
Sorry ... I read but was unfortunately distracted from your original post. You have a system that came with Lion. The Lion that is on your system is only for your computer and cannot be downloaded from the app store again because you never purchased it officially through the App Store.
Try this for making an external USB/DVD copy of Recovery on an external disk. internet is still required for reinstall, though, I believe: http://support.apple.com/kb/HT4848. But at least you have a separate Recovery Partition if you ever need a fully new and empty internal disk.
Your assumption is incorrect. Although he may not be able to download it from the App store he can download it directly for the Apple servers using the recovery partition on his original drive.
All you have to do is start the install routine and then point the install to an external hard drive. Once the download is finished the computer will reboot to start the install. At that reboot disconnect the external drive so the install can not start. Boot the computer back into the OS on the internal hard drive, which is what will happen automatically once the external drive is disconnected. Then connect the external and copy the files from it that were downloaded. Right click on that downloaded package file and select Show contents. In the contents of that package is a file called InstallESD.DMG. Copy that file out of the package and burn it down to a DVD or USB thumb drive and you now have the Full Lion Installer. I have several of them laying around on different hard drives and 2 USB thumb drives which I have used to reinstall Lion on my 15" MBP.
Sorry OP I should of just typed this out in my first post. -
On iPhoto, I can no longer access the 'Classic' option which would lay out my photos on the page. It will send them as attachments only. I need the page layout for my work. Any thoughts as to why this has changed? It used to fully lay out the photos so I could add notes and detailed information before I sent them. I am thinking it is something simple that I have just missed...
The "Photos" view has been replaced by the Media Browser.
Most applications will show you the Photos icon in the Sidebar, when you need to select photos in a file chooser dialoge. Mail, Safari, the iWork apps. See Terence Devlin's User Tip: How to Access Files in iPhoto
For example, in the File > Open dialogue in Preview I am seeing this in the sidebar. -
I did everything the article suggests. And for my macbook pro it works perfectly. But all the other devices (iphone 5, 4, Macbook Air) can't connect to the network. Anybody any idea's?
Try resetting your modem. Power it down. Wait a moment, then power it up again. While it resets, do not change what is connected to it.
In another, though unrelated article, Apple recommends the following:
If you have configured your Wi-Fi base stations in the past, it may be helpful to do a factory default reset of each Wi-Fi base station that will be part of the wireless extended network before you begin.
This step really ought not be considered optional for the configuration you propose. If the problem persists after resetting your modem, reset everything else too. -
My computer wont recognize my iphone 4. when i plug it into any computer it doesnt charge. i followed the procedure on the website but the device manager still says unknown device. any ideas how to fix this??? the weird thing is it use to work until yesterday. thanks
Will it charge when connected to a wall outlet? The USB port on your computer must be 2.0
Powering Apple and third party peripherals through USB -
While playing games like NFS and CounterStrike my macbook pro it does connects to the hotspot by any device either a Windows laptop, but doesn't show or connect to the server (LAN) created by windows player. Or, any other devices doesn't connects to the LAN server that i created in the Game.
Could any one help me please.Please do not post more than about 50 lines of console logs or output from an Application crash at a time. No one can make it through those.
If you had a kernel panic, those are Full of good information and should be posted in their entirety. They are stored, and can be read back and posted using this article:
How to log a kernel panic -
"To import all songs on the CD, click Yes in the window that appears. iTunes starts importing the CD."
I am using a Dell and can't import the CD I need because the window doesn't automatically pop up. How do I fix this? Any thoughts?You could try my script ConvertFormat and see if you like the results. Would be easier than inserting the CDs and correcting the tag info again. Just be aware this is a one-way trip. Once you've thrown away some quality to shrink the files you can't get it back without going back to the source. You may better off investing in a bigger drive.
If you just want to squeeze more on the iPod you can use the built-in iTunes option to convert files to a lower bitrate as they are added to the device.
tt2
Maybe you are looking for
-
Sum Fields based on change in another field
I have data that looks like this <Records> <VBLEN>123</VBLEN> <MATNR>012356</MATNR> <ZSPR>1.02</VBLEN> </Records> <Records> <VBLEN>123</VBLEN> <MATNR>568954</MATNR> <ZSPR>2.05</ZSPR> </Records> <Records> <VBLEN>856</VBLEN> <MATNR>259865</MATNR> <ZSPR
-
Data Model and Layout Relation
I wan to delete a column from group, before deleting this column i want to know where this column is used (i.e, in which field in layout section). Can somebody tell the easiest approach to find the layout filed where this column is used
-
Java Programming Language Answers
Hi, My business is to teach Java to legacy engineers. I'd like to use a book "Java Programming Language" as one of materials. This book contains number of excellent excercises,but without answers. I found a Web page of answers which is http://java.su
-
TM Skipping some files during backup
I've posted this question over on the TC board, because at first I thought it was related to the actual hardware. However, today I did a new back up to an external WD drive via firewire. The back up when fine, as did a few subsequent backups. Then TM
-
hi, i've been trying change the layout of the displaytags after export, but didn't work. For example, i have a list of some objects that i show in the displaytags, and able the export option. But, it's necessary when i click to export to pdf or excel