HT3258 how to uninstall the installed incompatible  third party application?

have install the incompatible application named "asphalt 6". but it doesn't remove from my machine. do you please tell me how to uninstall that type of application?

Have you checked the developers web site for directions?
Ciao.

Similar Messages

  • You have installed a third party application called CTLoader. You need to remove it.  /Library/Application Support/Conduit  /Library/InputManagers/CTLoader  /Library/Receipts/ctloader.pkg  /Library/Receipts/ Toolbar name .pkg  /Library/Application Support

    Could some one help me out how i get to /library/application
    If have found below the solution but don't know how to get there ? I am from the netherlands so please be easy in your words so that i could understand it.
    you have installed a third party application called CTLoader. You need to remove it.  /Library/Application Support/Conduit  /Library/InputManagers/CTLoader  /Library/Receipts/ctloader.pkg  /Library/Receipts/<Toolbar name>.pkg  /Library/Application Support
    Thanks for the effort !
    Peter

    Open the Finder. From the Finder menu bar click Go > Go to Folder
    Type or copy paste the following:
    /Library/Application Support/Conduit/Library/InputManagers/CTLoader 
    Click Go then move the Conduit/Library/InputManagers/CTloader file to the Trash.
    The same for /Library/Receipts and /Library/Application Support
    Check these folders as well.
    /Library/InputManagers/CTLoader
    /Library/ScriptingAddtions (anything CTLoader realted)

  • How to pass parameter value to third party application - silver light

    Hi Experts,
    I have requirement where i have to pass 3 parameter - namely Position key, Job , Job stag
    The application is third party application - build in Microsoft silver light
    Now from my application i have to pass 3 parameter to this application (URL)
    Can any one suggest me how can i proceed to do this
    Thanks in advance,
    Regards
    Farooq

    Hi
    Check this Link
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d05953ea-2608-2d10-968a-b44e8315049c?QuickLink=index&overridelayout=true
    Thanks and Regards
    Suresh

  • How to handle the cost in third party process

    Hi experts,
    As the request, my client has some trading goods. the customer buy them from my client. but there is no stock in my client. for this transaction, my client send PO to the vendor and the vendor delivers the products to the customer directly. After my client recieve the shipping notification, they create the invoice to end customer. So i want to use the Third-Party Function.
    But i have a confuse. How dose sap process the cost of trading goods(HAWA) in standard? you know, there is no stock for the trading goods, how to get the condition value of cost(VPRS)? Is there any special setting for the trading goods master data or some parameters in other place?
    can anyone give some supports? Thank you very much.

    Hi Dave,
    You can capture vendor price in billing document as a cost.
    Check the following settings.
    1) select the determine cost field in third party item category.
    2)  Billing relevance F
    3) check the VPRS condition type in pricing procedure. It will come after total amount.
    VPRS   statistical
    Subtotal = B
    Requirement = 4
    Now create a sales order with third party material and maintain price E.g  500 USD
    system will take VPRS value from material master in sales order level. E.g 300 USD. ( In billing level only system copies vendor price as a cost )
    Do the following transactions after sales order.
    Create a purchase order ME21N  with reference to PR( take the PR number from Sales order)
    In purchase order maintain price in item conditions tab E.g 320 USD.
    Goods receipt   MIGO
    Vendor invoice  MIRO
    Now create a Billing document with reference to sales order number.
    Here system takes VPRS cost 320 USD(PO price) instead of 300 USD which we maintained in Material master.
    Regards,
    Chandra

  • How to uninstall the installed software updates

    i have installed the update without reading what is it , and now all my compyuter is in hebrew the update called "Mac OS X Update Combined"
    thanks!

    Hi
    It's not the OS X update that is the problem, although it did enable Hebrew as a system language. Here are the instructions to get English (I'm assuming that's your preference?) back as the system language. You may need to follow visually as many of your icon labels will now be in Hebrew.
    Open System Preferences from the Dock (square icon with cogwheels) or from the Apple menu (4 down from the top).
    Click Languages (blue flag on the top line).
    In the list (for Hebrew, the list is on the right), locate US English or UK English, and drag it to the top of the list (above the Hebrew line). Close System Preferences. Log out (Apple menu, bottom option).
    Hope that helps
    Matt

  • How to update app installed by third party

    My colleague was using this macbook and installed x code. He has since disappeared prefering a life making wooden bowls to computer programming.
    I cannot use x code until I update it, but I cannot update it as it was installed on his apple id.
    I cannot find any way of unistalling it either, so I'm in the situation that this Macbook is of no use to anyone and might as well be a doorstop.
    Help desperately needed

    If the system is now yours you should  wipe it and re-install the OS and apps using your Apple ID, you'll be running into troubles like this repeatedly.
    If that is totally out of the question (and you should really give it strong consideration) you could delete the Xcode installed now, log into the Mac App store with your ID and install Xcode.
    That should work though I've never tried it myself.
    regards
    To uninstall Xcode just drag it to the trash from the Applications folder
    Message was edited by: Frank Caggiano

  • HT201272 How to reinstall old version of third party application?

    I was wondering if I can reinstall old version of my favorite goame app because it requires me to update my itouch's ios to 4.3 but I only have itouch 2G which has a limitation of 4.2.1 ios only

    This is only possible if the older version still exists on your computer or in a backup of it.
    (81653)

  • Third Party Application Called TuneUp Lost Ringtone Icons/Ability to Buy

    Okay, I purchased and installed a third party application that is supposed to help iTunes get album art and other things. All was going well until i did their latest, greatest update and now I cannot see any Ringtones icons in the field that shows if ringtones are available in iTunes purchased songs. I still have my "purchased ringtones, but I don't have the ability to purchase anymore on songs that are eligible.
    I've uninstalled TuneUp, reinstalled a fresh version of iTunes, but still not joy. How to I burn iTunes to the ground without losing my entire music library?

    Right that is the point. I had a whole slew of eligible songs purchased from iTunes in my library that now are not available for purchase. For example I just purchased two songs that have the icon in the iTunes store. After I purchase them the icon in the "Bell" ringtone column is not showing for the songs that should be eligible. The only recent change I've made is this third part application. So I am thinking this has messed with my library somehow.

  • Reinstalling OS 10.9  and third party applications

    After trying the many suggestions given here and still having problems with too many "applications quit unexpectedly" I have decided to reinstall 10.3.9. I would like to anticipate what I face by doing this---lost passwords, etc??? Also, how do I identify what are third party applications? Not usually a conspiracist, but five times this pm when i have tried to visit the votenader site, a crash has occured within seconds after I get to the site lol.

    Panthetic,
    Web browsers, such as Firefox and Camino compatible on 10.3.9, are still being updated by their developers to keep pace with changing web standards. Safari is being updated but not for 10.3.9 and it's version of Safari (1.3.2 is the farthest that a Panther user can update).
    Camino will feel very similar to Safari and can be customized to feel even more like it but the benefit is that it will function on sites that Safari 1.3.2 can no longer handle (Google Maps etc.).
    Personally, I would leave Safari and Firefox alone on your Mac for now as it's nice to have a backup browser if you have any problems with another that you are using (ie. Camino). If your available disk space is that low perhaps trash one but hold on to at least one spare browser.
    If you suspect a third party application of causing system problems I would look first to applications that embed themselves or intergrate more fully into the system. Applications that perhaps add a menubar icon or a system preference pane of it's own. Those would more likely cause problems with the system than a browser I should think.
    Can you not remember which apps you have downloaded as third party applications?
    "As before, how do you identify which ones are?"
    I don't have a method of determining original installed apps that came with your computer. Alot of that depends upon what model you have and what software was bundled with it originally. I'm from the school of "if I don't know for sure don't mess with it" so you don't stand the chance of messing up the system. If there are particular apps that you have questions about deleting you are probably wise to post back and ask before deleting them.
    littleshoulders
    Message was edited by: littleshoulders

  • In Mac OS X, I installed a third party toolbar to Safari which is making the program unusable. How can I uninstall it? It did not have an uninstall option.

    In Mac OS X, I installed a third party toolbar to Safari which is making the program unusable by constantly giving a dropdown box requesting a sign-in to a mail feed. It came from http://WWW.BBshare.com/Products/gtoolbar-for safari
    How can I uninstall the toolbar? It did not come with an uninstall option.

    Instructions for manually uninstaling third party add ons >  Unsupported third-party add-ons may cause Safari to unexpectedly quit or have performance issues

  • How can I set up printing to queues on a Windows 2008 server directly from the iPad apps and not from third-party applications without using AppleTalk or Bonjour?

    We have a Windows 2003/2008 server-based network with a dedicated print server which we would like to be able to print to over Wi-Fi.  How can I set up the printers on the iPad without downloading a third party application such as Print Central or Print N Share?  I want to just click the arrow and "Print" then choose the printer, which doesnt show up.  I want to be able to use the existing TCP/IP-based network that we have to reach these queues, not having to install Bonjour or AppleTalk to reach them.
    Thanks,
    KMQ7

    This would really be the "Holy Grail"   right now.  I think this a feature that every large organization requires. AirPrint works on a small scale, but is not really an enterprise class application.  In addition it uses the Bonjour discovery process which is difficult in a large LAN WAN environment.  For those that would remind me, I am aware of the enhancement link 

  • Ubuntu 10 (Linux) & Firefox 3.6 ~ How to uninstall the Adobe Flash Player plug-in & ActiveX control

    Ubuntu 10.045 (Linux) and Firefox 3.6.3  ~  How to uninstall the Adobe  Flash Player plug-in & ActiveX control
    In general Adobe needs to offer Ubuntu (Linux) support.  I don't use Windows anymore and will go with whatever company provides me the Plug In's I need to function.  In this case at the current time, I can't use Adobe flash Player to view You Tube video's.  I followed the link that helps a user fix the problem:
    Solve a Problem: The video won't play:
    http://www.google.com/support/youtube/bin/answer.py?answer=56115
    I then saw that you suggested that I first needed to uninstall any older versions of the Flash Player and then install the latest version of the Flash player.  I clicked on the link find out how to uninstall it here:
    How to uninstall the Adobe Flash Player plug-in and ActiveX control
    http://kb2.adobe.com/cps/141/tn_14157.html
    They didn't offer any help with Ubuntu 10.045 (Linux).  Please offer the instructions and automatic (non-terminal) uninstaller.  Also, I want an automatic installer for Ubuntu 10 (Linux) & Firefox 3.6 that is easy like like you have for Windows and like Sun's Java has for Linux.
    Message was edited by: u2rcrazy  ~   Edited Title

    You should go to this site to see what versions of Flash Player and Shockwave Player you have installed.
    http://www.adobe.com/shockwave/welcome/
    The versions you are listing (10.0 r12, 10.0 r2) appear to be Shockwave Plauer versions, not Flash Player.
    If you want to uninstall Flash Player, there should be an uninstaller in the install directory.  I do not know where that is on Linux.

  • Satellite A305-S6825: How to uninstall the Norton 360

    Just purchased the A305-S6825 and wonder how I might be able to uninstall the Norton 360 (in it's entirety) that was installed when I purchased the unit.
    Can anyone help?

    Hi
    You can uninstall the installed applications in control panel.
    Open Programs and Features clicking on the Start button.
    Then click Control Panel, click Programs, and then click Programs and Features.
    Then select a program, and then click uninstall.
    Furthermore you could use a free application called CCLeaner to clean the registry and Norton tracks.
    Cheers

  • How to uninstall the command line tools?

    I installed the command line tools in Xcode 4.5 from the preferences : downloads : command line tools.
    If i want to uninstall this component, what should I do？
    PS:
    I saw an answer in the Apple Support Communities about how to uninstall the Xcode 4.3 and later versions.
    This is the original: " If You want to uninstall completely XCode go to launchpad and push Xcode icon for two
    seconds, so click on the upper left checkbox.".
    I don't know what means "push Xcode icon for two seconds, so click on the upper left checkbox".

    There is no easy way to uninstall the command line tools. The following article has a script to uninstall them:
    You Don’t Need The Xcode “Command Line Tools”
    Read the comments in the article. I have not tested the script, but this is the first result when searching Google for "xcode 4.5 uninstall command line tools".

  • How to uninstall the app

    How to uninstall the build which have functionality of uninstall protection. In options application delete button is disable on that application.

    And the name of the app?
    You could be more helpful by providing more information, hard help in a guessing game.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

Maybe you are looking for