HT3258 my software is correct and it still not works
i was about to install the new software and then suddenly this message popped out and said my software is wrong mine isn't i checked like 5 times and when i searched for the needs to be updated folder i couldn't find ANY results thanks to apple now i cant get the new software HELP ME
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Similar Messages
-
I downloaded Lightroom version 5.7 in order to support tethered capture on my Nikon D750 and its still not working. Additionally when I was prompted to give my serial number for the update it was no where to be found on my Adobe profile although I purchased, and am paying monthly for my creative cloud for photography. Please help
Does your Cloud subscription properly show on your account page?
If you have more than one email, are you sure you are using the correct Adobe ID?
https://www.adobe.com/account.html for subscriptions on your Adobe page
If yes
Some general information for a Cloud subscription
Cloud programs do not use serial numbers... you log in to your paid Cloud account to download & install & activate... you MAY need to log out of the Cloud and restart your computer and log back in to the Cloud for things to work
Log out of your Cloud account... Restart your computer... Log in to your paid Cloud account
-Sign in help http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html
-http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html
-http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
-http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html
-ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp
-http://helpx.adobe.com/creative-cloud/kb/license-this-software.html
If no
This is an open forum, not Adobe support... you need Adobe staff to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us" -
When charging my Ipad mini, it turned off and its still not working, what do i do pls??
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. -
when i finally connected my mac to work network on windows environment everything related to apple including App store, Safari, software updates, iCloud and iTunes do not work using a proxy server and everything else is working very well including chrome browser…i tried everything but no clue...anybody have solution for this..???
I also forgot to note that this problem also persists with the new iBooks application. I cannot get past the 'Get Started' screen or access the iBooks Store. Again, all top bar menus are unresponsive.
DT -
When connecting my ipod nano (5th gen) I get an error messege saying that it was recognized but not propperly. I treid everything that the support site said to do but it still not working. What do I do no?
This came from another thread, but worked for me. Problem is with newest iTunes 4.62. Unistall iTunes, as well as its helper programs (Apple Application Support, Apple Mobile Divice Support, and Apple Software Update). Reboot, and reinstall iTunes. It will reinstall all the other ones and you should be able to connect your nano. Good luck.
-
TS1292 My iTunes will not work at all I've had 7 different people try it and its still not working
My iTunes will not work at all I've had 7 different people try it and its still not working
Cconnect it to your computer with the latest version of iTunes installed.
-
After successfully installing the iTunes upgrade to 10.6.1, Now I cannot open and access itunes. I have tried a complete uninstall and reinstall and it is still not working. I have looked through many support communities for answers. I added an iPad 2 almost a year ago and all was fine until my upgrade to the "cloud services" and upgrade to new version. I have been without iTunes on my PC for a month. Any suggestions on how to resolve this issue?
I too have only recently encountered this problem. I have been able to burn disks before but it keeps making all these weird sounds. It might be a hardware problem but the fact that everything else that uses a disk works I doubt it.
-
I have a 32gb iphone 5 the wifi signal is bad and the time doesnt work can someone help i did everything thats in my hands and its still not working
Do you experience the same issue on other WiFi networks?
Do any other iOS devices experience the same issue on your network?
Make sure you follow all steps provided in the article below:
iOS: Troubleshooting Wi-Fi networks and connections -
i tried everything to disable my ipod but ti still shows ipod is disable
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Forgot passcode or device disabled
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode. -
Bluetooth Mouse and keyboard STILL Not working can someone help me?
i have an apple Bluetooth Keyboard and wireles mighty mouse. Since i have installed leopard months ago it was working fine but then my mouse and keyboard stopped pairing with my Powerbook it recognises the devices but the refuse to pair i changed the batteries and installed the software that cam ith the keyboard and mouse and still nothing works.
Can someone help me pleaseAfter updating to 10.5.2 I am still experiencing problems with my Apple wireless mouse and keyboard. This is a Leopard issue ( here is just one blog on the topic
http://aralbalkan.com/1086 ) in 2005 I purchased a Mac Mini which I love and never experienced a Bluetooth problem till I installed Leopard several months ago, now at least once a week, on average 2-3 times a week, I loose connection with the keyboard or the mouse and it takes awhile to re-establish the connection. I was hoping the last upgrade would address this issue but no such luck. -
6.84, Vista and N95 - Still not working
I was kind of hoping that 6.84 would be the answer to a few problems however there are still problems with the Nokia Flagship and Microsofts Flagship OS.
The Driver for the "Nokia N95 Bluetooth Modem" still is not supported comes up with Code 10 Error. Driver is not automatically detected by windows. I manually used "Nokia Phone Bluetooth Modem" which works OK.
The other Bluetooth Services such as OBEX still do not have drivers available for them.
Still appears to be Malfunctioning really. IMO Perhaps its wise to make sure things interwork with each other rather than rushing to bring them out.
Shunts...
I will mostly be communicating with a Nokia E72 Zodium Black
Nokia E72-1 with Vr 051.018.207.04 Software
If this post helped... Add some kudos!!I mean that the system is unable to initalise and install device driver for "Bluetooth perhiperal device".
If the stack is unable to support the profiles then the phone should not request them.
Also the driver that is "Nokia N95 Bluetooth" Does not work under Vista - I suspect that its a Windows XP Driver, because it comes back with "Code 10 This device cannot start"
Come on now, Vista has been in Beta for ages and RTM for at least six months there is really no excuse for it.
Shunts...
I will mostly be communicating with a Nokia E72 Zodium Black
Nokia E72-1 with Vr 051.018.207.04 Software
If this post helped... Add some kudos!! -
4.0 EA3 -- SQL Server Drag and drop still not working
My clients love SQLD D because they can access SQL Server and Access as well as Oracle of course.
Drag and Drop of tables from the table view have not worked in a while.
appear to only see things in the Master Database. Even if you retrieve the list of databases and set you still en up only in the MASTER.
You then have to fully qualify to retrieve a table.What exactly is your question here?
-
i was changing the font on my iphone yesterday and the apple came out saying it was going to respring or restart springboard i dont really remember now it has not came on since yesterday i have turned it off and on a couple of times and it does not do nothing the apple comes up and it seems like its going to start up but it freezes what do i do to fix it i really need my phone i have a child and im by my self most of the time with my son
Is your iPhone jailbroken? If so see: http://support.apple.com/kb/HT3743
-
Smtp settings correct; outgoing email still not working
Every time I change providers, I have problems with my SMTP settings. I moved, had to change to AT&T. I got the recommended settings from AT&T, entered them for both incoming (POP) and outgoing (smtp.att.yahoo.com); port for incoming: 955; port for outgoing: 465; Connection security: SSL/TLS; authentication: no authentication & password (neither work). I called AT&T and they said everything is set correctly. I can RECEIVE messages, but can't SEND them. If I use AT&T's e-mail to send messages, it works - but T-bird still doesn't work. What am I missing?
looking at at&t site I see inbound and outbound in addressing att.net
'''att.net''' inbound.att.net / 995 outbound.att.net / 465 (POP3)
[http://www.att.com/esupport/article.jsp?sid=KB401570 This page shows settings] -
Savage4: DRI installed and enabled, still not working!
My box has Savage4-based ProSavage 8 onboard video hardware, which I am attempting to enable acceleration for. XOrg comes with 2D drivers for this hardware; however, 3D drivers are not included in XOrg or the Arch default kernel (though the kernel is compiled with DRM), so I had to install Mesa. Bingo, there's my 3D driver.
My xorg.conf seems to be configured right (it bloody well should be since I used hwd!)... But still no DRI according to glxinfo, still lame FPS from glxgears (113-144 FPS for normal-sized window), and still bloody hideous FPS from TuxRacer (~2 FPS).
Any help? I'm pretty sure I'm doing this right... Do I need to compile something into the kernel or something?
My xorg.conf:
# Auto-generated by KNOPPIX mkxf86config
Section "ServerLayout"
# PS/2 Mouse using /dev/input/mice in Kernel 2.6
# Serial Mouse not detected
Identifier "XFree86 Configured"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
# Additional fonts: Locale, Gimp, TTF...
# FontPath "/usr/X11R6/lib/X11/fonts/latin2/75dpi"
# FontPath "/usr/X11R6/lib/X11/fonts/latin2/100dpi"
# True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig! RgbPath "/usr/X11R6/lib/X11/rgb"
ModulePath "/usr/X11R6/lib/modules"
FontPath "/usr/X11R6/lib/X11/fonts/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/misc"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo"
FontPath "/usr/X11R6/lib/X11/fonts/PEX"
FontPath "/usr/X11R6/lib/X11/fonts/cyrillic"
FontPath "/usr/X11R6/lib/X11/fonts/Type1"
FontPath "/usr/share/fonts/ttf/western"
FontPath "/usr/share/fonts/ttf/decoratives"
FontPath "/usr/share/fonts/truetype"
FontPath "/usr/share/fonts/truetype/openoffice"
FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
FontPath "/usr/share/fonts/latex-ttf-fonts"
FontPath "/usr/X11R6/lib/X11/fonts/defoma/CID"
FontPath "/usr/X11R6/lib/X11/fonts/defoma/TrueType"
EndSection
Section "Module"
Load "ddc" # ddc probing of monitor
Load "GLcore"
Load "dbe"
Load "dri"
Load "extmod"
Load "glx"
Load "bitmap" # bitmap-fonts
Load "speedo"
Load "type1"
Load "freetype"
Load "record"
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail" "true"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" ""
EndSection
Section "InputDevice"
Identifier "PS/2 Mouse"
Driver "mouse"
Option "Protocol" "auto"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "Monitor"
# Warning: This may fry old Monitors
# Very conservative. May flicker.
# VertRefresh 50.0 - 62.0 # Extreme conservative. Will flicker. TFT default.
# Default modes distilled from
# "VESA and Industry Standards and Guide for Computer Display Monitor
# Timing", version 1.0, revision 0.8, adopted September 17, 1998.
# $XFree86: xc/programs/Xserver/hw/xfree86/etc/vesamodes,v 1.4 1999/11/18 16:52:17 tsi Exp $
# 640x350 @ 85Hz (VESA) hsync: 37.9kHz
### Uncomment if you don't want to default to DDC:
### Uncomment if you don't want to default to DDC:
HorizSync 31.5 - 82.0
VertRefresh 50.0 - 120.0
Identifier "Monitor0"
ModeLine "640x350" 31.5 640 672 736 832 350 382 385 445 +hsync -vsync
ModeLine "640x400" 31.5 640 672 736 832 400 401 404 445 -hsync +vsync
ModeLine "720x400" 35.5 720 756 828 936 400 401 404 446 -hsync +vsync
ModeLine "640x480" 25.2 640 656 752 800 480 490 492 525 -hsync -vsync
ModeLine "640x480" 31.5 640 664 704 832 480 489 491 520 -hsync -vsync
ModeLine "640x480" 31.5 640 656 720 840 480 481 484 500 -hsync -vsync
ModeLine "640x480" 36.0 640 696 752 832 480 481 484 509 -hsync -vsync
ModeLine "800x600" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
ModeLine "800x600" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
ModeLine "800x600" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
ModeLine "800x600" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
ModeLine "800x600" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync
ModeLine "1024x768" 44.9 1024 1032 1208 1264 768 768 776 817 +hsync +vsync interlace
ModeLine "1024x768" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
ModeLine "1024x768" 75.0 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
ModeLine "1024x768" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
ModeLine "1024x768" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
ModeLine "1152x864" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
ModeLine "1280x960" 108.0 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync
ModeLine "1280x960" 148.5 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync
ModeLine "1280x1024" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
ModeLine "1280x1024" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
ModeLine "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync
ModeLine "1600x1200" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
ModeLine "1600x1200" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
ModeLine "1600x1200" 189.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
ModeLine "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
ModeLine "1600x1200" 229.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
ModeLine "1792x1344" 204.8 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync
ModeLine "1792x1344" 261.0 1792 1888 2104 2456 1344 1345 1348 1417 -hsync +vsync
ModeLine "1856x1392" 218.3 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync
ModeLine "1856x1392" 288.0 1856 1984 2208 2560 1392 1393 1396 1500 -hsync +vsync
ModeLine "1920x1440" 234.0 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync
ModeLine "1920x1440" 297.0 1920 2064 2288 2640 1440 1441 1444 1500 -hsync +vsync
ModeLine "1800x1440" 230.0 1800 1896 2088 2392 1440 1441 1444 1490 +hsync +vsync
ModeLine "1800x1440" 250.0 1800 1896 2088 2392 1440 1441 1444 1490 +hsync +vsync
ModeLine "640x480" 43.2 640 680 744 848 480 481 484 509 -hsync +vsync
ModeLine "768x576" 35.0 768 792 872 976 576 577 580 597 -hsync +vsync
ModeLine "768x576" 42.9 768 800 880 992 576 577 580 601 -hsync +vsync
ModeLine "768x576" 45.5 768 808 888 1008 576 577 580 602 -hsync +vsync
ModeLine "768x576" 51.8 768 808 888 1008 576 577 580 605 -hsync +vsync
ModeLine "768x576" 62.6 768 816 896 1024 576 577 580 611 -hsync +vsync
ModeLine "800x600" 68.2 800 848 936 1072 600 601 604 636 -hsync +vsync
ModeLine "1024x768" 113.3 1024 1096 1208 1392 768 769 772 814 -hsync +vsync
ModeLine "1152x864" 81.6 1152 1216 1336 1520 864 865 868 895 -hsync +vsync
ModeLine "1152x864" 119.7 1152 1224 1352 1552 864 865 868 907 -hsync +vsync
ModeLine "1152x864" 143.5 1152 1232 1360 1568 864 865 868 915 -hsync +vsync
ModeLine "1280x960" 124.5 1280 1368 1504 1728 960 961 964 1001 -hsync +vsync
ModeLine "1280x960" 129.9 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync
ModeLine "1280x960" 179.0 1280 1376 1520 1760 960 961 964 1017 -hsync +vsync
ModeLine "1280x1024" 191.0 1280 1376 1520 1760 1024 1025 1028 1085 -hsync +vsync
ModeLine "1400x1050" 122.6 1400 1488 1640 1880 1050 1051 1054 1087 -hsync +vsync
ModeLine "1400x1050" 149.3 1400 1496 1648 1896 1050 1051 1054 1094 -hsync +vsync
ModeLine "1400x1050" 155.8 1400 1496 1648 1896 1050 1051 1054 1096 -hsync +vsync
ModeLine "1400x1050" 179.3 1400 1504 1656 1912 1050 1051 1054 1103 -hsync +vsync
ModeLine "1400x1050" 214.4 1400 1512 1664 1928 1050 1051 1054 1112 -hsync +vsync
ModeLine "1600x1200" 280.6 1600 1728 1904 2208 1200 1201 1204 1271 -hsync +vsync
Option "DPMS" "true"
# HorizSync 28.0 - 78.0 # Warning: This may fry very old Monitors
EndSection
Section "Device"
### Available Driver options are:-
# sw_cursor is needed for some ati and radeon cards
#Option "sw_cursor"
#Option "hw_cursor"
#Option "NoAccel"
#Option "ShowCache"
#Option "ShadowFB"
#Option "UseFBDev"
#Option "Rotate"
# The following line is auto-generated by KNOPPIX mkxf86config
# BusID "PCI:1:0:0"
Identifier "Card0"
Driver "savage"
VendorName "All"
BoardName "All"
ChipSet "Savage4"
Card "savage Savage4"
Option "DRI" "on"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 32
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "DRI"
Group "users"
Mode 0666
EndSection
Section "Extensions"
Option "Composite" "Enable"
Option "RENDER" "Enable"
EndSection
What glxinfo says:
name of display: :0.0
display: :0 screen: 0
direct rendering: No
server glx vendor string: SGI
server glx version string: 1.2
server glx extensions:
GLX_ARB_multisample, GLX_EXT_visual_info, GLX_EXT_visual_rating,
GLX_EXT_import_context, GLX_OML_swap_method, GLX_SGI_make_current_read,
GLX_SGIS_multisample, GLX_SGIX_fbconfig
client glx vendor string: SGI
client glx version string: 1.4
client glx extensions:
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_allocate_memory,
GLX_MESA_swap_control, GLX_MESA_swap_frame_usage, GLX_OML_swap_method,
GLX_OML_sync_control, GLX_SGI_make_current_read, GLX_SGI_swap_control,
GLX_SGI_video_sync, GLX_SGIS_multisample, GLX_SGIX_fbconfig,
GLX_SGIX_pbuffer, GLX_SGIX_visual_select_group
GLX extensions:
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_OML_swap_method,
GLX_SGI_make_current_read, GLX_SGIS_multisample, GLX_SGIX_fbconfig
OpenGL vendor string: Mesa project: www.mesa3d.org
OpenGL renderer string: Mesa GLX Indirect
OpenGL version string: 1.2 (1.5 Mesa 6.1)
OpenGL extensions:
GL_ARB_depth_texture, GL_ARB_imaging, GL_ARB_multitexture,
GL_ARB_point_parameters, GL_ARB_point_sprite, GL_ARB_shadow,
GL_ARB_shadow_ambient, GL_ARB_texture_border_clamp,
GL_ARB_texture_cube_map, GL_ARB_texture_env_add,
GL_ARB_texture_env_combine, GL_ARB_texture_env_crossbar,
GL_ARB_texture_env_dot3, GL_ARB_texture_mirrored_repeat,
GL_ARB_transpose_matrix, GL_ARB_window_pos, GL_EXT_abgr, GL_EXT_bgra,
GL_EXT_blend_color, GL_EXT_blend_func_separate, GL_EXT_blend_logic_op,
GL_EXT_blend_minmax, GL_EXT_blend_subtract, GL_EXT_clip_volume_hint,
GL_EXT_copy_texture, GL_EXT_draw_range_elements, GL_EXT_fog_coord,
GL_EXT_multi_draw_arrays, GL_EXT_packed_pixels, GL_EXT_point_parameters,
GL_EXT_polygon_offset, GL_EXT_rescale_normal, GL_EXT_secondary_color,
GL_EXT_separate_specular_color, GL_EXT_shadow_funcs,
GL_EXT_stencil_two_side, GL_EXT_stencil_wrap, GL_EXT_subtexture,
GL_EXT_texture, GL_EXT_texture3D, GL_EXT_texture_edge_clamp,
GL_EXT_texture_env_add, GL_EXT_texture_env_combine,
GL_EXT_texture_env_dot3, GL_EXT_texture_lod_bias, GL_EXT_texture_object,
GL_EXT_texture_rectangle, GL_EXT_vertex_array, GL_APPLE_packed_pixels,
GL_ATI_texture_env_combine3, GL_ATI_texture_mirror_once,
GL_ATIX_texture_env_combine3, GL_IBM_texture_mirrored_repeat,
GL_INGR_blend_func_separate, GL_MESA_pack_invert, GL_MESA_ycbcr_texture,
GL_NV_blend_square, GL_NV_point_sprite, GL_NV_texgen_reflection,
GL_NV_texture_rectangle, GL_SGIS_generate_mipmap,
GL_SGIS_texture_border_clamp, GL_SGIS_texture_edge_clamp,
GL_SGIS_texture_lod, GL_SGIX_depth_texture, GL_SGIX_shadow,
GL_SGIX_shadow_ambient, GL_SUN_multi_draw_arrays
glu version: 1.3
glu extensions:
GLU_EXT_nurbs_tessellator, GLU_EXT_object_space_tess
visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav
id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat
0x23 24 tc 0 24 0 r y . 8 8 8 0 0 16 0 0 0 0 0 0 0 None
0x24 24 tc 0 24 0 r y . 8 8 8 0 0 16 8 16 16 16 0 0 0 None
0x25 24 tc 0 32 0 r y . 8 8 8 8 0 16 8 16 16 16 16 0 0 None
0x26 24 tc 0 32 0 r . . 8 8 8 8 0 16 8 16 16 16 16 0 0 None
0x27 24 dc 0 24 0 r y . 8 8 8 0 0 16 0 0 0 0 0 0 0 None
0x28 24 dc 0 24 0 r y . 8 8 8 0 0 16 8 16 16 16 0 0 0 None
0x29 24 dc 0 32 0 r y . 8 8 8 8 0 16 8 16 16 16 16 0 0 None
0x2a 24 dc 0 32 0 r . . 8 8 8 8 0 16 8 16 16 16 16 0 0 None
0x3f 32 tc 1 0 0 c . . 0 0 0 0 0 0 0 0 0 0 0 0 0 None
What glxgears gives me:
622 frames in 5.0 seconds = 124.400 FPS
565 frames in 5.0 seconds = 113.000 FPS
565 frames in 5.0 seconds = 113.000 FPS
678 frames in 5.0 seconds = 135.600 FPS
565 frames in 5.0 seconds = 113.000 FPS
Any help?
Edit: changed "Mode 0660" to back to "0666". Doesn't help a damn thing.
BTW, I'm using the stock Arch kernel (linux-2.6.10-ARCH).Hi guys, it doesn't work here either, even if I followed the instructions (tried March 15th snapshot). Dmesg gives me these errors when trying to load the DRM module:
kobject_register failed for drm (-17)
[<c031f85b>] kobject_register+0x5b/0x70
[<c01397c1>] mod_sysfs_setup+0x51/0xc0
[<c013adb0>] load_module+0xbc0/0xce0
[<c0152add>] vma_link+0xad/0xf0
[<c013af27>] sys_init_module+0x57/0x240
[<c0103279>] sysenter_past_esp+0x52/0x75
savage: disagrees about version of symbol drm_open
savage: Unknown symbol drm_open
savage: disagrees about version of symbol drm_fasync
savage: Unknown symbol drm_fasync
savage: disagrees about version of symbol drm_poll
savage: Unknown symbol drm_poll
savage: Unknown symbol drm_get_resource_len
savage: disagrees about version of symbol drm_core_get_reg_ofs
savage: Unknown symbol drm_core_get_reg_ofs
savage: Unknown symbol drm_get_dev
savage: disagrees about version of symbol drm_ioctl
savage: Unknown symbol drm_ioctl
savage: disagrees about version of symbol drm_exit
savage: Unknown symbol drm_exit
savage: disagrees about version of symbol drm_core_get_map_ofs
savage: Unknown symbol drm_core_get_map_ofs
savage: disagrees about version of symbol drm_init
savage: Unknown symbol drm_init
savage: Unknown symbol drm_get_resource_start
savage: Unknown symbol drm_cleanup_pci
savage: disagrees about version of symbol drm_mmap
savage: Unknown symbol drm_mmap
savage: Unknown symbol drm_initmap
savage: disagrees about version of symbol drm_core_reclaim_buffers
savage: Unknown symbol drm_core_reclaim_buffers
savage: disagrees about version of symbol drm_release
savage: Unknown symbol drm_release
Any ideas?
Maybe you are looking for
-
Looking for a simple database.
I am looking for a very simple data base program to organize email addresses for mailings that we do for our business. I was using numbers but with the recent upgrade it does not seem like the best option. A free program would be my preference. Any s
-
Hi All, Office 365 -Onenote 2013 I am facing this issue when ever i tried to open the existing Onenote.onepkg. Unless i give different name it will not open. What is the problem and how can i fix this? Thanx In Advance,
-
MOVED: MSI 790XT-G45 - OC Switch doesn't work
This topic has been moved to Overclockers & Modding Corner. https://forum-en.msi.com/index.php?topic=134127.0
-
How to open .msg attachments
I upgraded recently Leopard 10.5.1. Previously I was working 10.4.10 so I do not have experience with Mail from 10.5.0. In Leopard Mail 3.1 (914/915) I am receiving some mails with files xyz.msg and abc.msg (example names) attached. Those files do no
-
Quantity Mapping in Message mapping
I have the below mapping conditions... Create for every quantity related to billcode and Sponsorcode. If there is no quantity, create segment with quantity 0. How to map this? Please help how to map this clearly... Thanks in advance..