HT3258 Parallels Desktop 7 is showing it's incompatible with the Mountain Lion release. Please Help.

So I upgraded to Mountain Lion for the new features and now my virtualization software Parallels Desktop 7 (Full Retail Version), is showing that it's incompatible with "Mountain Lion", the ironic twist is that on www.Parallels.com it shows that it's compatible. So I don't know what to do. I can try to reinstall PD7, but if it's already incompatabile then there's no sense for re-installation. If anyone knows something that I haven't mentioned please let me know. Thank you.

From the Parallels website you must be running 'Parallels Desktop 7 for Mac build 15104', update is available for download, if you are I suggest an email to Parallels.
regards

Similar Messages

  • HT204269 itunes showing 'backup is corrupt or not compatible with the firmware you restored'.Please help.

    itunes showing 'backup is corrupt or not compatible with the firmware you restored'.Please help.

    Hi Ckuan,
    Thanks a lot for your advice.    
    Deleting the correupted back up means to delete the information of one month since the last back up I made is one month ago.....right? 
    This back up I made right before I restored my iphone.  During the restore however my OS was upgraded to 5.1.1. and reading the comments on the internet it seems I am not the only one whom experience this problem. 
    Can it be that if I downgrade my OS back to 5.1. the back up will not be considered as corrupted?  If so, how do I downgrade the iphone?
    Thanks in advance.

  • My computer is showing a File Folder with a ? Symbol! PLEASE HELP!!!

    My computer froze while I was doing homework so I tried to restart it and when I did, It doesn't show the apple logo but rather a File Folder with a ? Symbol! I tried reselecting the hard drive but it didn't show! I looked up how to fix this and tried it all and non of it helped me:/ I CANNOT lose my information on my harddrive cause I have very IMPORTANT work on there! I have mac OS X Lion! So I don't have a start up disk for that and the one i have is stuck in my computer right now! Apple won't help me and I need my computer soon! PLEASE HELP!!!

    Reinstalling Lion Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion: Select Reinstall Lion and click on the Continue button.
    Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.
    Five ways to eject a stuck CD or DVD from the optical drive
    Ejecting the stuck disc can usually be done in one of the following ways:
    1. Restart the computer and after the chime press and hold down the left mouse button until the disc ejects.
    2. Press the Eject button on your keyboard.
    3. Click on the Eject button in the menubar.
    4. Press COMMAND-E.
    5. If none of the above work try this: Open the Terminal application in your Utilities folder. At the prompt enter or paste the following:
         /usr/bin/drutil eject
    If this fails then try this:
    Boot the computer into Single-user Mode. At the prompt enter the same command as used above. To restart the computer enter "reboot" at the prompt without quotes.

  • PSE 7 incompatible with Logitech back button?  Please help!

    I am test PSE 7. I view all of my pictures and decide I want to see one in particular. I double-click on it to view the individual picture. How do I go back to the Organizer view without having to constantly go to the left arrow in the upper left hand corner? I use a Logitech MX 1000 laser mouse where you can assign functions to keys. The key to which I've assigned the "back" function works in every other application, including browsers. I thought this worked in prior versions. Help! Without this convenience, I'm going to have to pass on the app, but perhaps there's a setting I'm missing. Thanks!

    PSE nor the previous versions support mouse back key function, but as suggested by Dave there is a very simple way of going back to the organiser view by double clicking on the image.

  • HT1369 my i phone 4 is stuck on the lock screen and showing a power cord with the i tunes symbol

    my i phone 4 is stuck on the lock screen and showing a power cord with the i tunes symbol

        LauraAnn41,
    Help is our middle name! So let's jump into troubleshooting right away. Have you tried holding the power button and home key simultaneously for up to 30 seconds as an alternate reset? Please give that a shot and let us know how it goes.
    EvanO_VZW
    Follow us on twitter @VZWSupport

  • HT3258 Why is Parallels incompatible with the new OS? What can I do about it?

    Why is Parallels incompatible with the new OS? What can I do about it?

    Upgrade?
    https://discussions.apple.com/message/19059850#19059850

  • HT4743 I just purchased an iTunes TV show and it successfully downloaded. It is now saying that I do not have the proper version of QuickTime on this version of iTunes (10.6.3). How can a show I purchased be incompatible with the latest version of iTunes?

    I just purchased an iTunes TV show and it successfully downloaded. It is now saying that I do not have the proper version of QuickTime on this version of iTunes (10.6.3).
    How can a show I purchased be incompatible with the latest version of iTunes?
    I want a refund, but I can't even figure out how to request one through support. Super frustrated and long time Apple customer.

    After a day of trying, both iTunes and my Apple TV are telling me that the episodes of Scooby Doo I purchased are incompatible due to QuickTime. I still don't understand how I purchased something from iTunes that doesn't work with iTunes.
    the exact error I receive when I try to play an episode is the following:
    "This movie requires QuickTime, which is not supported by this version of iTunes."
    Any advice would be great!

  • SOURCE_PACKAGE is INCOMPATIBLE with the FORMAL PARAMETER DATA_PACKAGE

    Hello Experts,
    Infocube A is getting updated from shopping carts DSO. I have added 3 new fields in SC DSO then cube transformations got inactive.  I do not want 3 new fields in cube. we have report on DSO. Below is syntax error when  checking transformations.
    Error: In PERFORM or CALL FUNCTION "ROUTINE_9998", the actual parameter "SOURCE_PACKAGE" is incompatible with the formal parameter "DATA_PACKAGE".
    3 New fields are available in tys_SC_1 but not available in tys_SC_1_full. I tried to insert 3 fields in tys_SC_1_full but still it is showing same syntax error.  And more TYPE is availalbe tys_TG_1_full.  This type does not have 3 fields.
    Please  advice.
    Thanks in advance.
    Regards
    Venkata.

    Hello Rathy,
    I have resolved issue by addinng fields to data package. Issue is becasue of 4 fields in source and I have added only 3 fields in data package. Added one more field to data package and no syntax errors when checked.
    Thanks for the input and points assigned.
    Regards
    Venkata Agraharam.

  • Compile error in hidden module: Essbaselogon. This error commonly occurs when code is incompatible with the version, Platform, or architecture of this application

    Hi,
    I am getting below wrror while accesing the Ecel:
    compile error in hidden module: Essbaselogon. This error commonly occurs when code is incompatible with the version, Platform, or architecture of this application

    IIRC essbase is a financial reporting add-in (Hyperion, or something similar?).
    This message is telling you that the add-in is not compatible with your current software. You should check with the vendor who provided the essbase add-in. Tell them what version of windows and Excel (and maybe Hyperion) you are using, and get a compatible
    version from them...
    If you do not need or run essbase/hyperion/etc then you should just remove/disable the add-in. If it doesn't show in your add-in menu, then you may have to do a repair installation or re-install Excel

  • YouTube will not work on safari for me on the ipad. Is there anyway to fix this? I can go anywhere else on the internet fine and it works on google chrome, but on safari it shows a blank screen with the bar on top after it loads.

    YouTube will not work on safari for me on the ipad. Is there anyway to fix this? I can go anywhere else on the internet fine and it works on google chrome, but on safari it shows a blank screen with the bar on top after it loads, if it's even loading at all.
    I do not know if it's relevant or not, but I got a message on my ipad while on safari saying that my iPhone has a virus. I looked it up and it seems it might have just been an ad from the website I was on, but it happened around the same time YouTube stopped working.

    You will find that using the YouTube app will provide a better viewing experience for YouTube videos.

  • Subroutine-the actual parameter is incompatible with the formal parameter

    Hi,
    I have the following code that is outputting an error message during activation:
    DATA: I_RESBB TYPE TABLE OF RESBB,
          WA_RESBB TYPE RESBB.
    PERFORM OBTAIN_RESBB_DATA
    USING I_RESBB.
    *&      Form  OBTAIN_RESBB_DATA
    *       text
    *      -->P_I_RESBB  text
    FORM OBTAIN_RESBB_DATA  USING    VALUE(P_I_RESBB) TYPE RESBB.
    ENDFORM.                    " OBTAIN_RESBB_DATA
    However, I am getting the following messages during activation:
    In PERFORM or CALL FUNCTION "OBTAIN_RESBB_DATA", the actual parameter
    "I_RESBB" is incompatible with the formal parameter "P_I_RESBB".
    What am I doing wrong? I have checked through many different threads & sites but can't find a solution.
    Thanks,
    John

    John, since you seem quite familiar with the ABAP help and obsolete statements I'm now surprised what you were initially asking for.. .
    Anyhow, below a sample coding with the table being passed as a USING parameter. Avoid using VALUE on the parameter (i.e. pass by value) unless you need a copy of the parameter. Otherwise this leads to a performance overhead (requirement to copy the parameter), especially for large internal tables.
    TYPES T_RESBB_TAB TYPE STANDARD TABLE OF RESBB WITH NON-UNIQUE DEFAULT KEY.
    DATA I_RESBB TYPE T_RESBB_TAB.
    PERFORM OBTAIN_RESBB_DATA USING I_RESBB.
    FORM OBTAIN_RESBB_DATA  USING I_RESBB TYPE T_RESBB_TAB.
      FIELD-SYMBOLS: <RESBB> TYPE LINE OF T_RESBB_TAB.
      LOOP AT I_RESBB ASSIGNING <RESBB>.
        " Additional coding for evaluating/updating the table
      ENDLOOP.
    ENDFORM.
    Cheers, harald
    P.S.: Update of my posting: Just read your one comment. Looks like your only problem was attempting to define the table type in the parameters section of the form routine. This doesn't work. If you don't have a type you could use a generic type (i.e. simply just say <i>using i_resbb type table</i>), but in general I would stick to strong typing unless you have a generic routine that must handle different table types. So simply refer to a table type from dictionary or that you defined in your program.

  • I've upgraded to OS 10.8.2 and my Bowers and Wilkins MM-1 Speakers were working fine until today, and now they won't play any sound at all, even though iTunes shows the audio is playing. I've tried both the headphone jack and the USB port. Please help!

    I've upgraded to OS 10.8.2 and my Bowers and Wilkins MM-1 Speakers were working fine until today, and now they won't play any sound at all, even though iTunes shows the audio is playing. I've tried both the headphone jack and the USB port. Please help! I don't want to have to be stuck using my internal speakers!
    Thank you,
    Chris

    Michael,
    Thanks. I haven't mixed down the audio or checked the number of tracks in Prefs. Good points.
    As far as a mixdown goes, I'll definitely give it a try, though I wonder whether or not the tracks will be recognized during mix down recording - given that you can't hear either of those segments in playback. Just have to try.
    Re the preferred number of allowed tracks - I'll go check as soon as I send this off, but I'm not sure that applies in this case, since the two Channels containing the segments that are pinked out are not in additional tracks. I should have mentioned that other audio clips and segments on the same Channels in the SAME tracks ARE heard in playback. As are two additional track in the 2nd Sequence. It's only when the two sequences are joined that the pink tinted segments can't be heard. Within the sequence the same audio cuts playback as they should. Thanks again &
    Best regards,
    David

  • Cannot get progress to show in app store download of Mountain Lion

    Having to re-download Mountain Lion on my mid 2009 MBP from overseas. The ML app shows "downloading" in dock with progress bar under it (and just a hint of blue for hours now), but in the App Store on the Purchases tab it just shows the Mountain Lion app with a gray "Download" button. I want to see the progress of the download since I'm overseas and it could take a couple days. If I click on the "Download" button it goes clear for a minute but goes back to the gray "Download". I've tried closing and re-opening App Store, restarting the computer and I've also tried doing it all in Safe Mode. No difference. I can't be sure something is actually happening without a progress meter. Any ideas out there?

    There may be no apparent "progress bar" in the App Store. It may be a bug associated with this particular download. Unfortunately I am not in a position to determine if this is related to you being overseas or not.
    To determine if it is actually downloading use Launchpad. You should see a fairly obvious new icon with an associated progress bar. Make sure you check every Launchpad page by swiping left / right.
    The downloaded file will also be in your Applications folder. When it finishes, it looks like this (Mavericks icons are shown; Mountain Lion is similar):
    Check your Downloads folder. Before it finishes downloading, it will have a "progress bar" at the bottom. While it is downloading it looks like this:
    If it's paused, click the icon to restart it.
    Once it completes the icon will appear in Applications and Launchpad, it's just easier to find in Launchpad.
    Launchpad equivalents:
    When it's finished it looks like this:
    If it really is not downloading read Mac App Store: How to resume interrupted downloads
    Open the Mac App Store.
    From the Store menu, choose Sign In.
    Enter your Apple ID and password.
    Click Purchases to get to your Purchases Page.
    Click the Resume button next to the app name.
    If that doesn't work, "sign out" of the App Store, and sign back in again.
    If that doesn't work, try restarting your Mac.
    If that doesn't work, write back.

  • I really need someone to help me. I have been trying to figure out how to select a PDF document to convert to a Word doc. When I go to select a PDF file, all that shows up is the WORD docs. does not show ANY of my PDF files... Please help me figure out wh

    I really need someone to help me. I have been trying to figure out how to select a PDF document to convert to a Word doc. When I go to select a PDF file, all that shows up is the WORD docs. does not show ANY of my PDF files... Please help me figure out what is going on? We have it set on auto renewal so I know its not that we haven't renewed this subscription, because we pay automatically.

    Hi olivias,
    It sounds like there may be some confusion on your system about what application should be associated with PDF files. You can reset filename associations by following the steps in these articles (depending on your operating system):
    How to change the default application for a file type | Macworld
    http://windows.microsoft.com/en-us/windows/change-default-programs#1TC=windows-7
    Please let us know if you have additional questions.
    Best,
    Sara

  • I down loaded about 100 cds to my library and I can no longer view the downloaded artwork it's shows a black picture or blank. How can I get the artwork back? Please help! Thank you

    I downloaded about 100 cds to my library and I can no longer view the downloaded artwork it's shows a black picture or blank. How can I get the artwork back? Please help! Thank you.

    Hi- apparently I also had a similar moment of madness and thought that 'freeride games' would be fun. Well, so much for that! It added a ton of things to my tool bar, I would like to uninstall it, any suggestions for this one?
    thanks :)

Maybe you are looking for