HT3258 Upgraded to Lion and now I can't get my monitor to work
I just upgraded to Lion and now I can't connect to my Dell monitor. I am using a MacAir. I have tried chaning the input. But that didn't work. Any suggestions?
That was a widely publicized fact, it is a good idea to always check compatibility before upgrading. Your options are to go back to SL or find another app.
Similar Messages
-
I disconnected my Ipod classic from a receiver in "user" mode and now I can't get the Ipod to work via USB in my car or receiver. HELP!!
See the following for how much you will have to pay for the exchange.
Apple - Support - iPod - Repair pricing -
i upgraded to IOS 7.0.2 on my ipad and now I can't get past the terms and conditions page to finish the setup. I click agree and then a small box appears to click agree again and I can't choose agree or disagree. I just need my ipad to work... help
Reset iPad and continue with update
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
Updated iphone 4s and now I can't get my phone to work anymore?
I have the iphone 4s and I backed it up to Itunes and then retored and updated everything and now I can only get my iphone on and it keeps asking to restore it over and over again with Itunes, I hve restarted both my Mac and my Iphone and still can't get past this part.
Help?Try to restore it in recovery mode, see:
If you can't update or restore your iOS device -
Thave undate to Lion , now I can't right or left click to correct spelling errors or make Pages learn the error and its correction for the future, please help.
ThanksSystem Preferences / Mouse / Point & Click /
Tick Box and use the drop down menu to choose the primary and secondary mouse buttons. -
I just updated my iphone 4 to the new iOS 7.0.2 and now it's stuck in a screen that has a blue music button and below that itunes and below that and arrow pointing up and below that a pic of a charging cable. Help?
If you are implying that you've never synced and backed up the device, well that is simply not smart.
User's can backup their iOS devices at any time by connecting to iTunes and selecting the backup option from the Summary tab or by backing up to iCloud.
Most people will regularly backup their devices and transfer iTunes purchases to iTunes on the computer for safekeeping.
Basically, you are stating that the device has not been used as designed and now data has been lost. Sorry, that's just too bad. But at least now you know how to prevent this in the future. -
I've just upgraded to Lion and now iTunes can't connect to the iTunes store.....??
I've repaired Keychain, re-installed iTunes and it still won't work.....
Please help.
JeremyYou can find the connection settings in Tools > Options > Advanced : Network : Connection
If you do not need to use a proxy to connect to internet then select "No Proxy"
See "Firefox connection settings":
* [[Firefox cannot load websites but other programs can]] -
printer assistance
Turn the printer off then back on. If that didn't help, open System Preferences > Print & Scan (or Print & Fax) for a prior Mac OS X then select the Print ab.
If you see the printer on the left, select it then click - (minus)
Now click + to reset the printer.
Might also help to clear the queue.
Click: Open Print Queue
Delte any files in the list then click delete. -
I upgraded to Mountain Lion and now I can't use any of my software!
What a disaster and huge mistake. Upgraded to Mountain Lion and now I can't run Autocad 2012 for Mac, any of my Adobe Creative suites software such as Photoshop, Illustrator.. and now I can't even do upgrades because Mountain Lion doesn't allow me to launch DMGs. I've lost thousands of $'s in software, not to mention time, but most importantly now I can't even work! I just tried to revert back to Snow Leopard by intalling it back in my hard drive and it won't let me. I never used Time Machine. Is there any way on earth I can revert back to my old operating software??? Please help. And if you haven't upgraded yet and are thinking about it. BEWARE - and don't do it. I've been reading that Mountain Lion isn't working with Microsoft applications either. Omy...I haven't even checked that.
and of course no one at Apple support can or will help melunaulu wrote:
It's not my Microsoft that I use much or am worried about. I can't run AutoCAD. and I can't update AutoCAD either. When I try to mount an update just to get it working, it says it can't run the DMG file. Apparantly this new platform doesn't use Rosetta - which is needed to run any of these updates or downloads. ***? and then When I try to open CS4 appliations - Adobe Photoshop, Illustrator, or InDesign - I get the message "Licensing for this product has stopped working - Error 150:30 - ***?
So basically I can't use ANY of the programs I ran before. And yes I have googled desperately all day. Adobe has some suggestions - like deleting a Flex files - which I did...Defragmenting - which I did. And most importantly provides am Adobe Licensing Repair tool to fix - which I can't open because Mountain Lion won't mount the DMG in order to run it! It's a complete disaster and I don't have the money or time to purchase and or reinstall everything. I am just screwed.
No you are not, calm down, cbs20 already gave you the answer on opening dmg files, updates are available for most of your programs and I assume you have licenses for the Adobe products. AutoCad you'll have to wait for.
And please .... Start Backing Things Up, you could lose it all without one, work included. -
I just upgraded to OS X Lion and now I can't open the application Adobe ImageReady CS because PowerPC applications are no longer supported. Is there anything I can do to fix this?
There is no fix. It simply means that the software is outdated. Adobe would need to release a newer non-PPC version that supports Lion. They may have done that already, I don't know.
-
HELP!! i have a ton of videos of my boys stored in iPhoto..They played fine on my old OSX system (leopard). However, I just upgraded to snow leopard and then to mountain lion and now i can't open my videos at all anymore. HELP!!
Can you tell us about one or more of the video files - what are they? QuickTime? MP4? Something else? How did you create the video files in the first place?
I do a lot of video and when I upgraded to Snow Leopard I discovered that many of the QT videos that I had created previously (via iMovie & Final Cut) would not play correctly in QuickTime X - the bizarre behavior was that QT X acted as if my video files were only audio files! I reported this to Apple at the time but never heard anything back, and there hasn't been any change in later updates to QT X.
The solution was to (re)install QuickTime 7. But first look in your Applications > Utilities folder. When you upgrade from Leopard to Snow Leopard, the installer normally moves the old QT 7 program to your Utilities folder. If it's there, try using QT 7 to play one of your video files. If QT 7 is not there, you can download and install it from here Make sure you are running at least OS X 10.6.3 before you install QT 7. It's even better if you make sure you are running 10.6.8 which was the last release of Snow Leopard. -
I upgraded to Lion and now can't print PDF files and Acrobat reader doesn't work anymore. What can I do to get it working?
If you upgraded and were using a version of Acrobat Reader that was legacy, that is PPC compatible, then you will have to upgrade to a version compatible with Lion as Lion no longer has Rosetta to interface with the legacy software.
I know that Acrobat, full version, 10 works with Lion...use it myself. -
I upgrade to Lion and now my Mail does not open, who can help me out?!
I upgrade to Lion and now my Mail does not open, who can help me out?!
I cannot get to the mail menu bar. When I try to open mail, I get "you can't use this version of mail with this version of Mac OS X. But the help suggestions don't work either. I am trying to download an update combo v1.1 to see if that helps. Thanks
-
I upgraded to Lion and now Safari hangs up and the updater hangs up so I can't install the update. Can anyone help?
Reinstalling Lion
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alterhatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Continue button.
Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer. -
I upgraded to Lion and now my iPhoto won't open and I don't know where my pictures are
I upgraded to Lion and now i don't have Iphoto anymore. Where did all of my pictures go??
To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
If you purchased it on the App Store or have a Recent Mac you can find it in your Purchases List.
Maybe you are looking for
-
Right-clicking on links and selecting "Open Link in New Tab" opens a blank tab.
Seems like opening links in new tabs just doesn't work in any fashion. I right-clicked a link (several, actually) to open it in a new tab. It opened a blank tab. No sign of ever acknowledging the link, nothing in the URL bar. Just blank. Wonder if th
-
We have big problems using the latest preview version of OC4J (Oracle9iAS (9.0.3.0.0) Containers for J2EE (build 020725.1695)). There are two problems: v Sending a message to the queue: In this case we try to send the message using the AQJMS libr
-
Downloading files from a location
hallo how to download a file from a specific location ( url location ) can we use URL class or is there anyother class
-
i really need some help! i own 2 mac computer one is a Mac Pro. and the other is a Macbook Pro. My problem is that i use both of them for work and the the files on them are no longer in sync. now i have ask apple them selves. but all they can suggest
-
Address Book opens blank and nonfunctional
Here's what the window looks like: http://www.pbase.com/strangeghost/image/73357438 None of my addresses are viewable, though mail can still pull them in as though nothing is wrong at all. I've tried deleting the Address Book plists and relaunching t