HT3275 Airport Time Capsule - Password Retrieval
I have an Airport Time Capsule. When I went to add another computer it to be backed up, I couldn't remember the passcode I used in initially setting up the Time Capsule. How does one retrieve it?
See this user tip from forum expert Tesserax.
AirPort - Regain Access from Forgotten Passwords
You want the Base Station password for the Time Capsule, not the wireless network password
Similar Messages
-
I have a warning message on my AirPort Time Capsule and my Apple credentials won't ope
The Time Capsule has two passwords.....one is a base station or device password, used to access settings on the Time Capsule. The other is a wireless network password, used to connect to the wireless network.
If you are trying to access the settings on the Time Capsule, you need to use the base station, or device password. -
Retrieve time capsule password
I forgot my time capsule password. How can I retrieve it?
If you selected the option to have KeyChain Access remember your password, you can retrieve it as follows:
Open Macintosh HD > Applications > Utilities > KeyChain Access
Select either your Time Capsule AirPort Base Station listing or the AirPort Network Password, depending on which password you need.
Double click the entry
Enter a check mark in the Show Password box and then enter your main administrator password for the Mac
Your password will be revealed
An alternate plan to using Keychain Access would be to perform a Soft Reset. See the document below for details
http://support.apple.com/kb/HT3728?viewlocale=en_US -
Forgot password to access my Airport Time Capsule, can't restore Time Machine backup
It is stupid, I know, but after the first time I setup Time Machine in my Airport Time Capsule (6 months ago) i never had to use the password because it stayed stored in my Keychain.
Anyway, couple days ago I had to format the hard drive of my MacBook Pro and I did it thinking that I had a complete data backup stored in my Airport Time Capsule (encrypted data). It was late when I realized that I did not have the password written/stored anywhere. Nothing to do about it, just move on and start all over again.
I need to clean up my Airport Time Capsule and set it to factory default. I already accepted that I will lose all my data and it is okay. So far all I found was how to reset the wifi user/password but nothing about deleting stored data or reset to factory default without having the encrypted password. Can you please help me? Thanks in advance!The encrypted data is not related to the Time Capsule.. that is purely Time Machine.
Very sorry for you.. it is one big danger when you encrypt.
Reset to factory.
Factory reset universal
Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
Wipe the hard disk. Open the airport utility go to the disk tab. Click on erase disk.
Select just quick erase.. it just deletes the file table and is not secure but fine for your purposes. -
How can I get access to my Airport Time Capsule while I have forgotten my password
The harddisk of my iMac had crashed, lately. After te repair the iMac had to configured again, also the connection to the Airport Time Capsule.
I have my password to connect to Time Capsule forgotten. Is there a way to install the Time Capsule again with a new or without a password.AirPort Utility 6.x- If you forget your base station, AirPort Time Capsule, or network password
-
I have a new Macbook pro and can't recall the password I used with my Time capsule - How can I (ideally) retrieve or possibly change the time capsule password?
Remember security on a TC is an illusion.
Simply press the reset button for 1-2 sec.. you must not do too long .. it will then hard reset.. but soft reset will revert all passwords to default for 5min. ie TC password is now public.
Remember this the next time because anybody at all can change your passwords.
Once into the TC you can then open the view passwords if you wanted any weaker security. Click and open the TC.. and click on edit.. then go to the top menu..
Voila .. all your passwords in plain sight to any Tom Dick and Fred. -
What is the default username and password for a Airport Time Capsule 3TB
What is the default username and password for a Airport Time Capsule 3TB
There is no default user name on any of the AirPort routers, but the default password is......
public -
How do I correct the following problem?
"Time Machine couldn't complete the backup to "Robert's Airport Time Capsule".
The backup disk image "/Volumes/Data/Robert's iMac.sparsebundle" is already in use.xor. wrote:
I switched off the TM for 10 seconds and my laptop still complains about the backup image ... is in use.
Some ideas?
There is some more details here.
C12 http://pondini.org/TM/Troubleshooting.html
Tell us more if you cannot get it working. -
How to set up AirPort + Time Capsule On the Same Network but make it so only i use it?
Ok so i am planning on getting the AirPort + Time Capsule in a few weeks, and i have seen many peole talk about how there is a right way and wrong way to set it up because apperently the bad way makes it run slow? Well i have two questions, one is how do i set it up the right way to use it to the full potential to use the new beamforming feature? And my second question which is kind of a problem is that I have internet already but my other brothers use it and i told them about pitching in buy it and they dont want to because they think its pointlesss, so what i want to know is if I can connect it to my existing wi-fi but at the same time like create a diffrent network so that only i can use it? (ex. have my wifi, 2WIRE123 for example, and then some how connect the ethernet cable to the airport + time caplsule and create a new network like 2WIRE124 so they would both basiaclly be using the same internet connection but separated to 2 diffrent networks?) Thank You.
so what i want to know is if I can connect it to my existing wi-fi but at the same time like create a diffrent network so that only i can use it?
Sorry, but no.
If you can connect the AirPort to the 2Wire router using a permanent wired Ethernet connection, then you can configure the AirPort to create a new wireless network with its own wireless network name and password. -
Time Capsule Airport
Hello to all, good day, sorry my english google, but it is the tool I have at the moment. I'm having trouble with my Time Capsule Airport, I made all the settings according to the manual, but there has been a connection problem with my iMac. When I finish my work I turn off the imac and then again when they return to work and care, it can not connect to Time Capsule Airport, making it impossible to remove the files and make back up by Time Machine only works when I turn off and turn on the Airport Time Capsule , but I think this may end up with the unit. What can this happening and how to solve? Thank you.
Olá a todos, bom dia, desculpe meu inglês google, mas é a ferramenta que tenho no momento. Estou tendo dificuldades com a minha Airport Time Capsule, fiz todas as configurações de acordo com o manual, mas tem existido um problema de conexão com meu iMac. Quando termino meus trabalhos desligo o imac e depois quando retorno pra trabalhar novamente e ligo, ele não se conecta a Airport Time Capsule, impossibilitando retirar os arquivos e fazer o back-up pelo Time Machine, só funciona quando desligo e ligo a Airport Time Capsule, mas acho que isso pode acabar com o aparelho. O que pode esta acontecendo e como resolver? Obrigado.This is easier to do with pictures perhaps.. since we do not share a common language and machine translation leaves a lot to be desired.
In the airport utility bring up your Time Capsule.
Simply post the screenshots here.
So here is mine.
Click on the Edit button and give us the Internet and Wireless and Network tab..
eg.
Please also make sure you are set to ipv6 in your wireless or ethernet .. whichever is used.. and do tell which.
This is wifi in your computer.
The following are important..
DO not use long names with spaces and non-alphanumeric names.
Use short names, no spaces and pure alphanumeric.
eg TC name. TCgen5
Wireless name TCwifi
Use WPA2 Personal security with 10-20 character pure alphanumeric password.
read apple instructions to help with TM and TC.. they did finally admit it has issues in Mavericks.
OS X Mavericks: Time Machine problems
Mount the TC manually in finder.
AFP://TCgen5.local
When asked for the password .. that is the disk access password and save it in the keychain.
Reset Time Machine
See A4 here. http://pondini.org/TM/Troubleshooting.html -
Time capsule has been working perfectly for months.
Suddenly I can't connect to the drive on my airport time capsule and am receiving the message: “AirPort Time Capsule” can’t be opened because the original item can’t be found.
Time machine appears to be still backing up (last backup within the last hour), but drive is not visible and I have files stored on it.
I have tried rebooting everything in order as suggested for other issues, anyone got any ideas how to see the drive again??What OS are you running??
It is very typical Yosemite issue.
1. In airport utility does the TC show up.. if so click it.. and see the summary page which will include its IP address. That is what you are after.
From my screenshot you can see the TC address is 192.168.2.57
It might well show up briefly after a reboot or in ipad / iphone version utility. Yosemite is hopeless. The airport utility hardly works.
2. In Finder use Go, Connect to server.
Type in SMB://192.168.2.57 (replace with IP you discover).
If it is possible it will request a password.. type that in and DO NOT FORGET.. to store it in your keychain.
This will work until the TC changes IP which won't happen if it is main router.. but will happen if it is bridged.. so you need to tell me the whole network setup.
Mavericks is nearly as bad and the above instructions should be universal except I would use AFP instead of SMB. Apparently Yosemite is now totally Windows oriented. -
I have just got an Apple Airport time capsule to back up my one year old iMac......how do I do it? I have tried putting an ethernet cable into the time capsule and to my sky hub, all I get is a flashing amber light, can anyone help I am a silver surfer not used to Apple products, but love them, plus I don't understand half of the jargon....HELP please
Apple's Setup Guide for the Time Capsule is pretty simple and clear for most users, and you don't indicate at what point or step that you are getting stuck.
So, please go to page 8 in your Setup Guide to review the topic of Plugging In Your AirPort Time Capsule.
The Sky hub will likely have 4 Ethernet <--> ports on the back of the device. Pick any one that you want and connect one end of the Ethernet cable to the port that you choose.
Then, connect the other end of the Ethernet cable to the WAN (circle of dots) port as shown in the Setup Guide.
Continuing with the instructions on page 8 of the Setup Guide, power up the Time Capsule by connecting the power cord from the back of the Time Capsule to a wall AC jack.
Note that the instructions indicate that the indicator light will be solid amber during startup, and it will change to blinking amber during the setup. The light will remain blinking amber until you have configured the Time Capsule at which time the light will turn green.
Next, go to page 12 of the Setup Guide to see the information to Use your Mac or iOS device to set up your AirPort Time Capsule.
You indicated in your tag line that you were using OS X Mountain Lion (10.8.3), and since that will exceed the minimum requirement of a Mac using OS X (10.7.5) as noted in the guide, you can use your Mac to set up the Time Capsule.
Continuing with the instructions on page 12 of the Setup Guide......
1. Open AirPort Utility on your Mac. It is located as follows: Finder (the smiley face on the dock) > Applications > Utilities > AirPort Utility
2. Select your AirPort Time Capsule and click Continue. You won't be able to do this, but read further......If you do not see the AirPort Time Capsule that you want to configure, choose it from the WiFi status menu in the menu bar, at the top of the screen.
So, clicking on the WiFi icon will yield a small window that looks like this:
The example below shows an AirPort Extreme. You will see Time Capsule on your screen. Click on Time Capsule.
When you click on Time Capsule, that will get the setup wizard going. it will take a minute to analyze the network, then display a screen that looks similar to the illustration below, except that you will see a picture of a Time Capsule on your screen
3. Continuing with the Setup Guide.......Follow the onscreen prompts to create a new network
Network Name...........Type in a simple name that you want to call your network. Do not use the suggested name.
Base Station Name....Type in a simple name that you want to call the Time Capsule. Mine is TC, for example.
Password...................Type in a password that will be used for both the network and the Time Capsule. Write that down.
Verify..........................Type in the password again to Verify
Click Next
The setup wizard will configure everything for you. When you see the message of Setup Complete, click Done.
The Time Capsule is now set up and it will display a green light. -
How to connect airport time capsule through wireless internet
Just purchased an Airport Time Capsule but having trouble to connect it through my Macbook Air using wireless. Could you please help? many thanks
Make sure the MBA has ipv6 set to link-local only for wireless.
I strongly recommend using short names, no spaces and pure alphanumeric.
eg TCgen5 and TCwifi
In fact if you keep having wireless issues.. with the MBA in the same room as the TC, change the wireless name to TC24ghz and TC5ghz so you have different names for both bands and see if that doesn't help.. try to connect to this band and then the other.
Use WPA2 personal security.. password 8-20 characters mixed case and numbers.. no non-alphanumerics.
Do not hide the wireless.. that is against the code and simply leads to issues.
If you still have issues.. post back.. does the MBA work ok on other routers or wireless access points?? -
How to connect airport time capsule to BT home hub 4
I am finding it difficult to connect my new airport time capsule (ATC) to the BT home hub 4. On opening the time machine it asks me to configure the time capsule before using. Should I be using the ATC as time machine only or should I be re-routing wireless from the ATC.
Make sure the MBA has ipv6 set to link-local only for wireless.
I strongly recommend using short names, no spaces and pure alphanumeric.
eg TCgen5 and TCwifi
In fact if you keep having wireless issues.. with the MBA in the same room as the TC, change the wireless name to TC24ghz and TC5ghz so you have different names for both bands and see if that doesn't help.. try to connect to this band and then the other.
Use WPA2 personal security.. password 8-20 characters mixed case and numbers.. no non-alphanumerics.
Do not hide the wireless.. that is against the code and simply leads to issues.
If you still have issues.. post back.. does the MBA work ok on other routers or wireless access points?? -
How to add Airport Time Capsule to an existing AT&T U-Verse Network?
Hello, and please bear with me as I am not very tech savvy I just purchased a 2TB Airport Time Capsule (5th Gen) because I'd like to backup my Macbook Pro wirelessly. I've tried customer service with my ISP without luck, AT&T U-Verse. I currently connect through a 3801HGV 2wire dsl modem/router and think I'm stuck using it since numerous other devices are hooked up through it and I'd rather not re-setup them up.
I'm having issues connecting the TC to my existing network. When I use the Airport Utility (tried both while TC is hardwired to my computer, and to the router/modem) it doesn't detect my 2wire network, another network I assume is my neighbor's.
From reading through other posts with similar issues it sounds like I can't use the Airport TC to extend my existing network, say if the U-Verse router was upstairs, Airport TC was downstairs is that correct? Do I have to hardwire the TC to the router/modem? I've found some screen captures of the Airport Utility but I cannot find them. I noticed that they were pre-Maverick screenshots so perhaps the menus have changed?Do I have to hardwire the TC to the router/modem?
Yes.
Connect an Ethernet cable from a LAN <-> port on the Uverse gateway to the WAN "O" port on the Time Capsule.
Power up the TIme Capsule (TC) and let it run few minutes, then hold in the reset button on the back of the device for 10 seconds and release. Allow a full minute for the TC to restart, at which time it will be slowly blinking amber.
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the Other Wi-Fi Devices tab at the upper left corner of the screen
Click on the Time Capsule now and AirPort Setup will open up automatically and take a minute to analze the network.
Click on Other Options at the lower left of the window
Click the button next to Create a new network
Enter a name for the network and a name for the TC and a password and click Next
Skip the step about cycling power on the modem
Wait while AirPort Setup sets up the TC, then click Done
Now click on the TC icon in AirPort Utility
Click Edit in the small window that appears
Click the Network tab at the top of the next window
Change the setting for Router Mode to Off (Bridge Mode)
Click Update at the lower right of the screen, then click Continue and wait for the TC to restart again
You should now have a green light on the TC
You can use either the Uverse wireless network or the TC wireless. If you want the best wireless performance, use the TC network.
Maybe you are looking for
-
After deleting everything, I've also tried to reload 3.6.12 fresh and I get a totally different nss3.dll entry point cannot be found error.
-
No excise duty in MIRO after stimulating
Dear all I have created PO mantaing all excise duty,after GR done with capture and post the excise.when Iam doing w.r.t PO,taxes are calculating correctly but when u click simlate no excise part is coming only Vendor debit and GR/IR .- GL Account. re
-
AppleTV and Infocus 7205 Projector Issue
I have an Infocus 7205 connected via DVI>hdmi to my theater system reciever. AppleTV 2 set up screen is distorted and jumpy/unreadable. I set up the ATV on a different monitor (LCD) and all worked well. Re-connected to my theater/projector and same p
-
Drag and Drop Attachment from Outlook to LABVIEW
Hi, I try to write a very simple program, which manages files. With the path control of LABVIEW we fortunately can Drag and Drop files from e.g. explorer, whose path I can use after dropping. The problem is, that I would like to do this directly with
-
I have populated a combo box with contents from LDAP. I wanted to show a hidden text box when a particular option is selected from the combo box. Awaiting responses...... Thanks in Advance, Ranjith