HT3275 Can anybody help me. I get this message when am trying to do my backup:The backup disk image "/Volumes/Data/Anne Prybyla's iMac.sparsebundle" is already in use.
When i try to use time Machine for my backup i get this message: The backup disk image "volume/data/AnnePrybyla's imac.sparsebundle is already in use. What can i do
Look over to the right of this page under the heading of More Like This for multiple answers and solutions to this bug.
Similar Messages
-
I recently bought a new Time Capsule and the following message has started to show:-
"Time Machine could not complete the back up. The backup disk image “/Volumes/Data-1/Brian’s iMac.sparsebundle” is already in use."
Can anyone help?Pondini is the resident Time Machine expert on the forums, and he has all the answers.
Check is excellent Time Machine - Troubleshooting support document
http://pondini.org/TM/Troubleshooting.html
See # C17 in particular -
I keep getting this error when trying to backup time capsule with time machine. The backup disk image “/Volumes/Data-1/Dan’s iMac.sparsebundle” is already in use.
Make sure that no other Macs are backing up at the time.
Pull the power cable from the back of the Time Capsule
Count to ten
Plug the power cable back into the back of the Tme Capsule
Wait a few minutes, then try a backup again. -
time machine: I get the following message: The backup disk image “/Volumes/Data-1/Clemens’s iMac.sparsebundle” is already in use - what to do? Where and how do I find that file and get rid of it?
I'm on Mountain Lion and have version 6.1 of AirPort utility so there is no button to "Disconnect All Users"and the only other option of "removing and re-selecting the drive via Time Machine Prefs" doesn't work either. So this will work.
Launch Airport Utility and select the TC "Edit" button, then select the Disks tab. Deselect "Enable File Sharing" and click "Update". The TC will reboot then follow the same procedure and reselect "Enable File Sharing" and click "Update". After TC reboots again you'll be up and running. Not the neatest way to do it but saves having to unplug the TC which risks disk damage and the whole procedure takes less than a minute.The "Enable File Sharing" button seems to have replaced the "Disconnect All Users" button but with the slight disadvantage that it reboots the TC which takes up additional time. -
It did not complete the backup with this msg:
The backup disk image “/Volumes/Data-1/Steve’s iMac.sparsebundle” is already in use.
Any ideas?
Thanks.Pull the power cord from the back of the Time Capsule
Count to ten
Plug the power cord back into the back of the Time Capsule
This simple reset will fix this issue about 98% of the time. If you are in the unlucky 2%, more help from Time Machine wizard Pondini is here:
The Backup disk image ... sparsebundle ... is already in use. -
I am getting an error message when trying to back up to time machine.
C12 http://pondini.org/TM/Troubleshooting.html
But there is a huge bug in Lion latest update to do with spotlight and TM.. and it is giving people grief.
100,000 people who have viewed this thread at least agree.
https://discussions.apple.com/thread/3190305?tstart=0
And there are numerous threads in Lion area.. people are not happy chappies in Lion land. -
I have restarted my computer, but still getting the same message.
Pull the power plug from the back of the Time Capsule, or pull the AC wall plug, whichever is easier
Wait a full minute
Power up the Time Capsule
This simple reset will fix the Mountain Lion bug about 95% of the time.
If not, see #C12 in Pondini's Time Machine --- Troubleshooting.
http://pondini.org/TM/Troubleshooting.html -
My time capsule stopped backing up and the following error message popped up, The backup disk image "/Volumes/Data/iMac.sparsebundle" is already in use.
Any ideas how to troubleshoot?Have a look here...
The Backup disk image ... sparsebundle ... is already in use.
From Pondini’s excellent Information Here...
http://pondini.org/TM/Troubleshooting.htm -
The Time Machine is not completing thte backup to my Time Capsule. I am receiving a message which reads "The backup disk image "/Volumes/Data/Mac Jet's iMAC.sparsebundle" is already in use." I cannot locate the source of the problem or what steps need to be taken to get the Time Capsule operating.
Hi, see if it shows here...
In Finder's Menu, select Go menu>Go to Folder, and go to "/volumes". (no quotes)
Volumes is where an alias to your hard drive ("/" at boot) is placed at startup, and where all the "mount points" for auxiliary drives are created for you to access them. This folder is normally hidden from view.
Drives with an extra 1 on the end have a side-effect of mounting a drive with the same name as the system already think exists. Try trashing the duplicates with a 1 or 2 if there are no real files in them, and reboot.
If it does contain data...
http://support.apple.com/kb/TS2474 -
Time Machine fails with this error: "The backup disk image “/Volumes/Data/Barbara’s MacBook Pro.sparsebundle” is already in use."
Can anyone assist me in correcting the problem causing this? Thanks.Reboot the TC.. Sometimes you need to reboot the whole network.
This is what comes of Lion and then made worse in Mountain Lion of Apple not spending enough time to fix the bugs.
Read C12 in pondini.
http://pondini.org/TM/Troubleshooting.html
C17 can be related I think. -
When my time machine tries to backup to my time capsule I get the following message"The backup disk image “/Volumes/Data/Kent’s MacBook Pro.sparsebundle” is already in use. " What do I need to do to fix this?
Restart the Time Capsule.
-
I keep getting this message: The backup disk image “/Volumes/Time Capsule/Coyner’s iMac.sparsebundle” is already in use. What should I do?
SeoulTom (Coyner)Make sure that no other Macs are backing up at the time
Pull the power cord from the back of the Time Capsule
Count to ten
Plug the power cord back into the Time Capsule
Wait a few minutes, then try a backup again
Check to make sure that you are running firmware 7.6.4 on the Time Capsule -
So my time capsule is 1 year old exactly and now I am getting this message:he backup disk image “/Volumes/Data/alicia’s MacBook Pro.sparsebundle” is already in use. what does this mean and how do I fix it? i have 1.84T left of space. I have been using this time machine successfully for exactly one year and just now am having an issue.
Thanks,This error involves a complex procedure to remedy the problem:
Pull the power cord from the back of the Time Capsule
Count to ten
Plug the power cord back into the back of the Time Capsule
Wait a few minutes and try a backup -
How do I fix this message from time machine: The backup disk image “/Volumes/Data/Jim Linnell’s Computer.sparsebundle” is already in use.
Restart the computer and your Time Machine backup system.
See also from More Like This:
what do I do about this time machine error message? The backup disk image “/Volumes/Data/Paul Brandow’s Computer.sparsebundle” is already in use.
Time Machine gives following error message;- The backup disk image “/Volumes/Data/JOE OTOOLE’s Computer.sparsebundle” is already in use. What does it mean? -
Hi folks - I didn't see my issue answered here, so I thought I would just toss it out there in case anyone had advice.
My error message is: The backup disk image “/Volumes/Data/Michael's MacBook Pro.sparsebundle” is already in use.
Thoughts?Look on the right hand side .. more like this.. I am surprised you can have missed it.. we get about 10 requests a day now to fix it.. especially since Mountain Lion has made it 10x worse.
C12 and C17
http://pondini.org/TM/Troubleshooting.html
Maybe you are looking for
-
How to restore the blue-ish tinted screen instead of the yellow-ish effect?
Is there an application or a fix to restore the color of the screen? I switch from the 1st generation iPhone to the new 3G iPhone but the Mc Donald look is absolutely horrible. Any clue to fix this ourselves as Apple does not seem to will correcting
-
bought iPhone 4, keeping iPhone 3GS for my wife, she doesn't have an email address, can we manage and back-up 2 phones in 1 iTunes acct?
-
How to add frame by frame control in MDIApp.java?
Hi, In the SimplePlayerApplet.java sample code, I can play video frame by frame. I would like to modify MDIApp.java code to do the sample. Can anybody show me how to do it ? Thanks
-
Problème de flash avec iPhone 5??
Gros soucis de flash ... En effet lors de la prise de photo en nocturne, la mise en route du flash s effectue malgré cela la photo et noir!!!
-
Mountain Lion - Cannot download additional components???
My MacPRO (2008) was running like clock work, but recently a gremlin has appeared. I have been on this forum before and so far all information has been really useful. The mac would start up and shutdown in one motion. I didn't even have enough time t