HT3275 Help? Time Machine could not complete the back up due to iMacsparsebundle is already in use??? This is the error message I am getting now with my Time Capsule as the back up device. Any suggestions?
Help? Time Machine could not complete the back up due to iMacsparsebundle is already in use??? This is the error message I am getting now with my Time Capsule as the back up device. Any suggestions?
Pull the power cord from the back of the Time Capsule
Wait a few minutes
Push the power cord back into the back of the Time Capsule
See if the Time Capsule will back up now
If not, see #C12 in this document:
http://pondini.org/TM/Troubleshooting.html
Similar Messages
-
My Time Machine is not backing up and gives me this error report:
The backup disk image "/Volumes/Data/Valarie'siMac.sparsbundle" is already in use
Time Machine could not complete backup
Can anyone help me?Look at the discussion on the following forum:
https://discussions.apple.com/thread/3882138?start=0&tstart=0
The responses given there may help. -
I recently bought a new Time Capsule and the following message has started to show:-
"Time Machine could not complete the back up. The backup disk image “/Volumes/Data-1/Brian’s iMac.sparsebundle” is already in use."
Can anyone help?Pondini is the resident Time Machine expert on the forums, and he has all the answers.
Check is excellent Time Machine - Troubleshooting support document
http://pondini.org/TM/Troubleshooting.html
See # C17 in particular -
For the past several days, I have been getting this message during backups:
Time Machine could not complete the back up. The backup disk image "Volumes/Data/bhoppy2's iMac.sparsebundle" could not be accessed (error-1). When I click on the 'help' icon on the message, it reverts to a blank page, and I cannot find anything online regarding the term 'sparsebundle.' In addition, I cannot access previous backups any longer.
Help?See C17 in Time Machine Troubleshooting by Time Machine guru Pondini:
http://pondini.org/TM/Troubleshooting.html -
My Macbook pro Early 2008 is randomly slow at starting up and when I am backing up to my time capsule I am receiving the following message 'Time machine could not complete the backup. '' ''The backup disk image ''/Volumes/name time capsule/ my name MacBook Pro (4).sparsebundle'' could not be accessed (error-1).
Problem started after deleting parrell desktop and window7 ?
Please help?Look at the more like this column on the right.. this is the most frequently asked question in this discussion area.
Reboot the TC.. restart the whole network if the simple reboot did not work.. start in order. modem.. router/TC.. clients. 2min gap.
Read C12 here. http://pondini.org/TM/Troubleshooting.html -
Time machine could not complete the back up
I've been trying to solve this by myself since I got the message on the 7th February which is when it failed & the last backup was made.
Time Machine Could Not Complete the Backup - this backup is too large for the back up disk. The backup requires 19.31 GB but only 7.71 GB are available.
Time Machine needs workspace on the back up disk, in addition to the space required to store backups. Open time Machine preferences to select a larger backup disk or make the backup smaller by excluding files.
I thought I could find out how to do it but I'm not great with computers, I just get by. Any help would be very much appreciated as I'm starting to get really worried.
ThanksThanks for that sanjampet...
sanjampet wrote:
Check thru Pondini's guide on TM, he is the resident guru on it.
You may find some help.
http://pondini.org/TM/Home.htmll
I've checked through Pondini's guide over the last few days & have done a number of things suggested to rectify the problem including repairing a corrupt HD in Disk Utility. The latest thing I have done is use "Disk Inventory X" to see what's taking up all the space on my comuter to find large files that I could exclude from back up. I decided to exclude my movies/films - but when I set TM up to exclude them, I thought it would give me the extra 11.6 GB that I apparently need to complete the back up. Not so.... after setting up exclusions, it still says the same figures on backup are needed... nothing has changed.
Has any one got any ideas? still stumped. -
My computer keeps getting a message that "Time Machine could not complete the backup. It continues, "Unable to complete backup. An error occurred creating the backup folder. I have to clear the pop up from my screen to continue using the computer. It is getting very tiresome. Any thoughts?
Hi there dean93,
You may find the troubleshooting steps in the article below helpful.
Time Machine: Troubleshooting backup issues
http://support.apple.com/kb/ht3275
-Griff W. -
I get the following message - "Time Machine could not complete the backup." "Unable to complete backup. An error occurred while creating the backup folder.""
This MAC is partioned with Windows 7 with only 50 gig devoted to Windows so my son can play Flight Simulator X on the machine.
I have a WD Passport External Hard Drive for the Back Up
I have spoken with WD Tech Support and they have been fantastic but I still keep getting this message. Any thought?
MaxxReboot the TC.. it sometimes gets lost on the network.. are you still actually using 10.6.8 as the problem is more prevalent on Lion and ML it seems is no better.
You might find reset of the TC is needed. change the names to short, no spaces pure alphanumeric.
Reset the TM to the new name.. use the A4 in Pondini's great KB.
http://pondini.org/TM/Troubleshooting.html -
My Time Machine could not complete the back-up. The error message says "The backup disk image "/Volumes/DataUser's iMac.sparsebundle" could not be accessed (error-1). How can I fix this problem?
Welcome to the Apple Support Communities
See > http://pondini.org/TM/C17.html -
I get this error message when I try to back up my laptop:
' Time machine could not complete the backup. The backup disc image "/Volumes/Data/Lou Ann Buesing's Mac Book Pro. sparse bundle' is already in use. "
Anyone know how to fix it?Reboot the TC.. Sometimes you need to reboot the whole network.
This is what comes of Lion and then made worse in Mountain Lion of Apple not spending enough time to fix the bugs.
Read C12 in pondini.
http://pondini.org/TM/Troubleshooting.html
C17 can be related I think. -
I have had a problem since 5th March with Time Machine on my iMac. I have had no problem since I got the computer in October backing up to an iomega HD but now I keep getting a message that "Time Machine could not complete the backup. An error occurred while creating the backup folder". Anyone know how to correct this?
I had the same "Error creating the backup folder" error - many times over.
I went into the Disk Utility, selected the Backup Disk and ran Verify. It checked out OK. But if not, could have run Repair.
Then did a complete shutdown and restart of the iMac and then tried "Backup Now" from the Time Machine icon's menu - it worked fine. -
Have OS 10.7.5. Computer off three days and now message comes that Time Machine could not complete backup because the "/volumes/PH's timecapsulPro.sparsebundle" is already in use. Whats that about?
Two Solutions for "sparse bundle already in use" Error
Simple solution (from Bob Timmons):
1. Make sure that no other Macs are backing up the Time Capsule at the time
2. Pull the power cord from the back of the Time Capsule
3. Count to ten
4. Plug the power cord back into the back of the Time Capsule
If Simple doesn't work:
The Backup disk image ... sparsebundle ... is already in use. -
Help needed with "Time Machine could not complete the backup" because it is too large
I'm receiving "Time Machine could not complete the backup" because it is too large for the backup disk. I have a 500 GB Time Capsule 802.11n (2nd Gen) and a MacBook Pro running on 10.6.8. I just replaced my laptop's original hard drive with a new 1 TB and restored that with what was on my Time Capsule. Now, I have no backups on my Time Capsule prior to the new hard drive. When I click get info on my hard drive, it states only 296 GB of the 1 TB is used. However, the Time Machine error message states that the backup requires 315 GB but only 221 GB are available. It has deleted all of my old backups, so I would think my Time Capsule should have plenty of room to backup the 296 GB on my computer. Is my old backup from my prior hard drive stuck on the Time Capsule and instead of Time Machine trying to just update those files, it is preserving the old hard drive backup separately and trying to make a new backup of my new hard drive using the remaining space? If so, how do I fix this? Any advice greatly appreciated.
Have you read for possible solutions over in the "More Like This" thread over here?----------------------->
Research TM Knowledge Base Articles? -
"Time Machine could not complete the backup. The backup disk is not availab
I have a Seagate 750 MB external disk connected to the USB port of my Airport Extreme Base Station. It worked fine with Time Machine under Leopard but it's not working the way it was under OS X 10.6.2. I'm hopeful someone can help me solve the problem.
Let's say the name of my Airport Extreme Base Station is "Airport." If I remember correctly, under Leopard time machine would start a wireless backup not long after I turned on the Seagate drive. That no longer happens.
I've erased and re-formatted the Seagate drive with 2 GUID partitions, one for my 24" iMac and one for my 17" MacBook Pro. Both computers are about 3 years old. In order to do the re-partitioning, I had to unplug the Seagate drive from the base station and plug it into one of the iMac's USB ports. If I didn't do this, nothing other than the iMac's drive appears in the left pane of Disk Utility, although the name of my base station, i.e, "Airport" does appear in the Finder and PathFinder (a replacement for Finder that I use).
In fact, Time Machine works under 10.6.2. as long as the Seagate drive is plugged into the iMac's USB port. As soon as I plug the Seagate drive into the USB port of the base station, Time Machine no longer works. The backup is "delayed." When I click on "Back Up Now" a few seconds go by and I get the following dialog box: "Time Machine could not complete the backup. The backup disk is not available."
In my Airport Extreme Base Station setup (Airport Utility version 5.4.2), the "Disks" pane sees both partitions on the Seagate drive. File sharing is enabled on the "File sharing" pane and "Secure Shared Disks:" is set to "With a disk password." "Airport Disks Guest Access:" is not allowed, nor is "Share disks over WAN."
When the Seagate drive is plugged into the base station and I click on "Airport" in the Finder or PathFinder, I'm prompted for the password I mentioned above because the shared disks are secured with a password. Once the password is typed, both partitions on the Seagate drive appear in Finder and PathFinder. When I try a Time Machine backup at this point, I get the same error I described above, i.e., "Time Machine could not complete the backup. The backup disk is not available."
One last thing, I did an "Archive and Install" when I upgraded to Snow Leopard since I thought the changes were relatively minor as compared with past OS X upgrades. Normally, I do a clean install but didn't feel like it this time. I also tried deleting the file /Library/Preferences/com.apple.TimeMachine.plist to no avail and restarted my iMac to no avail.
At this point I'm completely stumped. As I said, Time Machine works as long as the Seagate drive is plugged directly into one of the iMac's USB ports as opposed to the base station's USB port. But doesn't this defeat the purpose of having wireless backup? Once again, the wireless backup worked fine under 10.5.8.
I hope my message is clear and a solution would be most welcome.
Thank you,
RichardI'm having the same problem. If my TimeMachine drive is not connected, I'll get the "Time machine could not complete the backup" "The backup disk is not available" warning a couple times a day. This is extremely problematic if I'm giving a presentation. I have tried changing my TimeMachine drive, removing that drive, repairing permissions, and have not been able to solve the problem.
Please help! -
Time Machine could not complete the backup.
The backup disk image "/Volumes/Data/Name's iMacsparsebundle" could not be accessed (error -1 )I checked the pondini fixes and ended up doing the following - in case this could help someone else with OSX Lion and Time Capsule... http://pondini.org/TM/Troubleshooting.html
First, I downloaded and used Airport Utility 5.6 instead of 6.1 - BTW, I had to attempt download and installation THREE times before the program actually installed. Be persistant.
Pondini #5: It's possible some names (of all things!) may be a problem. See item C9. I had to re-name my Mac, Time Capsule, network, etc... to remove all apostrophes and spaces.
Pondini #7: If you have WD SmartWare installed on Lion, it's not compatible, per RoaringApps, and there are reports it can cause this problem as well. Use Western Digital's uninstaller, or delete the app from /Applications and the files com.wdc.WDDMservice.plist and com.wdc.WDSmartWareServer.plist from /Library/LaunchDaemons. There may also be a file in Library/Application Support.
I then had to shut down computer, unplug Time Capsule, unplug modem; plug everything in again, then reboot computer; then had to go to Apple- System Preferences- Network- and reselect my Time Capsule to connect to WiFi again.
Then opened Time Machine preferences again and attempted back up - it worked!
Maybe you are looking for
-
what command to i use to count the number of rows in a table and to do this will i use the statement while (resultset.next()) {
-
"Insufficient Store Credit" message.
Okay, so I am trying to download an app in the Itunes store that cost's $9.99, however every time I try to download it, Itunes says that I have insuffient store credit, even though I have $10.33, anybody know whats going on here?
-
What versions of Adobe Acrobat work with Lion
I would like to purchase Adobe Acrobat Standard for may Mac with Lion installed. It's not clear from the Adobe web site which versions of Acrobat are compatibile with Mac and Lion. I would appreciate any advice. Thanks, Rick
-
hi experts, after some processing of my alv, for records that are flagged, i will need to diable the checkbox. LOOP AT gt_rec_item INTO ls_alv WHERE locked_flag = 'X'. l_tabix = sy-tabix. REFRESH lt_celltab. ls_celltab-fieldname = '
-
How to see old successfully delivered messages in Adapter Engine
We are unable to see the messages that were successfully delivered by Adapter Engine more than a day.Ho do we see old successfully delivered messages by Adapter Engine.We are only able to see the messages that were 1 day old.We are using PI 7.1. We