HT3275 I am getting the error message: The backup disk image "/Volumes/Data-1/Richard's iMac.sparsebundle" is already in use.
I have restarted my computer, but still getting the same message.
Pull the power plug from the back of the Time Capsule, or pull the AC wall plug, whichever is easier
Wait a full minute
Power up the Time Capsule
This simple reset will fix the Mountain Lion bug about 95% of the time.
If not, see #C12 in Pondini's Time Machine --- Troubleshooting.
http://pondini.org/TM/Troubleshooting.html
Similar Messages
-
I keep getting this error when trying to backup time capsule with time machine. The backup disk image “/Volumes/Data-1/Dan’s iMac.sparsebundle” is already in use.
Make sure that no other Macs are backing up at the time.
Pull the power cable from the back of the Time Capsule
Count to ten
Plug the power cable back into the back of the Tme Capsule
Wait a few minutes, then try a backup again. -
time machine: I get the following message: The backup disk image “/Volumes/Data-1/Clemens’s iMac.sparsebundle” is already in use - what to do? Where and how do I find that file and get rid of it?
I'm on Mountain Lion and have version 6.1 of AirPort utility so there is no button to "Disconnect All Users"and the only other option of "removing and re-selecting the drive via Time Machine Prefs" doesn't work either. So this will work.
Launch Airport Utility and select the TC "Edit" button, then select the Disks tab. Deselect "Enable File Sharing" and click "Update". The TC will reboot then follow the same procedure and reselect "Enable File Sharing" and click "Update". After TC reboots again you'll be up and running. Not the neatest way to do it but saves having to unplug the TC which risks disk damage and the whole procedure takes less than a minute.The "Enable File Sharing" button seems to have replaced the "Disconnect All Users" button but with the slight disadvantage that it reboots the TC which takes up additional time. -
I recently bought a new Time Capsule and the following message has started to show:-
"Time Machine could not complete the back up. The backup disk image “/Volumes/Data-1/Brian’s iMac.sparsebundle” is already in use."
Can anyone help?Pondini is the resident Time Machine expert on the forums, and he has all the answers.
Check is excellent Time Machine - Troubleshooting support document
http://pondini.org/TM/Troubleshooting.html
See # C17 in particular -
It did not complete the backup with this msg:
The backup disk image “/Volumes/Data-1/Steve’s iMac.sparsebundle” is already in use.
Any ideas?
Thanks.Pull the power cord from the back of the Time Capsule
Count to ten
Plug the power cord back into the back of the Time Capsule
This simple reset will fix this issue about 98% of the time. If you are in the unlucky 2%, more help from Time Machine wizard Pondini is here:
The Backup disk image ... sparsebundle ... is already in use. -
So my time capsule is 1 year old exactly and now I am getting this message:he backup disk image “/Volumes/Data/alicia’s MacBook Pro.sparsebundle” is already in use. what does this mean and how do I fix it? i have 1.84T left of space. I have been using this time machine successfully for exactly one year and just now am having an issue.
Thanks,This error involves a complex procedure to remedy the problem:
Pull the power cord from the back of the Time Capsule
Count to ten
Plug the power cord back into the back of the Time Capsule
Wait a few minutes and try a backup -
I am getting this message when Timemachine tries to back up.
The backup disk image “/Volumes/Data/Lucio Bernal’s iMac.sparsebundle” is already in use.
Does it have something to do with Moutain Lion that I just installed?had the same problem and this fixed it, thanks!
finepiks wrote:
This will fix your problems:
Launch Airport Utility and select the TC "Edit" button, then select the Disks tab. Deselect "Enable File Sharing" and click "Update". The TC will reboot then follow the same procedure and reselect "Enable File Sharing" and click "Update". After TC reboots again you'll be up and running. Not the neatest way to do it but saves having to unplug the TC which risks disk damage and the whole procedure takes less than a minute.
I don't take credit for this fix but found it here:http://apple.stackexchange.com/questions/45569/disconnecting-disks-from-airport- extreme -
I have two Macs that won't back up to time capsule, says The backup disk image “/Volumes/Data/Douglas Chalmers’s iMac.sparsebundle” is already in use.
Please look over to the right of this page for the heading of More Like This.
There are multiple answers and solutions there. -
My time capsule stopped backing up and the following error message popped up, The backup disk image "/Volumes/Data/iMac.sparsebundle" is already in use.
Any ideas how to troubleshoot?Have a look here...
The Backup disk image ... sparsebundle ... is already in use.
From Pondini’s excellent Information Here...
http://pondini.org/TM/Troubleshooting.htm -
When i try to use time Machine for my backup i get this message: The backup disk image "volume/data/AnnePrybyla's imac.sparsebundle is already in use. What can i do
Look over to the right of this page under the heading of More Like This for multiple answers and solutions to this bug.
-
I am getting an error message when trying to back up to time machine.
C12 http://pondini.org/TM/Troubleshooting.html
But there is a huge bug in Lion latest update to do with spotlight and TM.. and it is giving people grief.
100,000 people who have viewed this thread at least agree.
https://discussions.apple.com/thread/3190305?tstart=0
And there are numerous threads in Lion area.. people are not happy chappies in Lion land. -
The Time Machine is not completing thte backup to my Time Capsule. I am receiving a message which reads "The backup disk image "/Volumes/Data/Mac Jet's iMAC.sparsebundle" is already in use." I cannot locate the source of the problem or what steps need to be taken to get the Time Capsule operating.
Hi, see if it shows here...
In Finder's Menu, select Go menu>Go to Folder, and go to "/volumes". (no quotes)
Volumes is where an alias to your hard drive ("/" at boot) is placed at startup, and where all the "mount points" for auxiliary drives are created for you to access them. This folder is normally hidden from view.
Drives with an extra 1 on the end have a side-effect of mounting a drive with the same name as the system already think exists. Try trashing the duplicates with a 1 or 2 if there are no real files in them, and reboot.
If it does contain data...
http://support.apple.com/kb/TS2474 -
Hi folks - I didn't see my issue answered here, so I thought I would just toss it out there in case anyone had advice.
My error message is: The backup disk image “/Volumes/Data/Michael's MacBook Pro.sparsebundle” is already in use.
Thoughts?Look on the right hand side .. more like this.. I am surprised you can have missed it.. we get about 10 requests a day now to fix it.. especially since Mountain Lion has made it 10x worse.
C12 and C17
http://pondini.org/TM/Troubleshooting.html -
Time Machine fails with this error: "The backup disk image “/Volumes/Data/Barbara’s MacBook Pro.sparsebundle” is already in use."
Can anyone assist me in correcting the problem causing this? Thanks.Reboot the TC.. Sometimes you need to reboot the whole network.
This is what comes of Lion and then made worse in Mountain Lion of Apple not spending enough time to fix the bugs.
Read C12 in pondini.
http://pondini.org/TM/Troubleshooting.html
C17 can be related I think. -
"The backup disk image “/Volumes/Data/Neil-MacBook Pro (171).sparsebundle” is already in use"
OS X 10.8.1 (12B19)
" error message just started
Mountain Lion
OS X 10.8.1 (12B19)
MacBookPro 2.53 Corei5
All software update installed
Time Capsule : 1TB, 599 of 998GB used
What causes it?
How do you fix it?
How do you stop it happening again?
Any ideas pleaseThanks for fast response.
I already tried C12, no luck. I did read C17, but that did not help either.
I agree that Apple should really spend a bit more time on ensuring this common problem is resolved more quickly
But where to do you sent this request to? Doesn't seem easy to find a person to send it to.
I dumped by corporate wIn-pc environment that I was forced to use for the past ...forever. Have been delighted with the Mac experience..... for 24 months..but these type of un-resolved matters with terse error messages reminds me of the bad old days.
I had the problem 2 weeks ago and solved it by "clicking about" after reading the forum Can't remember what i did though. V. V. V. frustrating when the Mac is a business tool. I don't want to be a mechanic, I want to be a driver.
Thanks again for your help
Maybe you are looking for
-
Infrared Remote not working unless held very close to AppleTV
I'm not sure if there is a problem with the remote or AppleTV. The remote only works if held approx. 8 inches away from the AppleTV. The remote works fine with the computer and will control the Mac from the other side of the room. I was expecting the
-
For loop stop in sub vi from main vi?
Hi! I want to control from my main vi a sub vi consisting of a stepped sine function generator. This sub vi has a for loop. The problem is that I want to have the option of terminating the loop in the sub vi from the main vi. I tryed using global var
-
How would I display my mac on a tv?
I've been wanting to display my mac on a tv for awhile now, but I don't really know how. I'm guessing that I would use a cable with the mini display port and a hdmi on it. Is there anything else that I need to know? If you know anything abo
-
Wait for event step..
hi all, I have a wait for event step in my owrkflow and it is working fine. My problem us i am not able to trigger this event using program can anyone please let me know what i am doing wrong. following is the code i am using to trigger the event DAT
-
Error in Inbound Idoc trigering Workflow Scenario
I am getting below Error while I am posting Z Inbound IDOC in production system. Please tell me what is getting wrong and how to correct. Work item 000000000000 cannot be read Message no. WL803 Diagnosis The work item with the specified ID can either