HT3275 I just brought a New Macbook Pro and was successful in transfering data from my old macbook. However when I try to back up to my time capsule I receive this message. "The backup disk image "/Volumes/Salvatore Totino's Time Cap/Lorraine's MacBook Pr
I just brought a New Macbook Pro and was successful in transfering data from my old macbook. However when I try to back up to my time capsule I receive this message. "The backup disk image “/Volumes/Salvatore Totino's Time Cap/Lorraine’s MacBook Pro.spars
You may need to reset TM and start with a fresh full backup.
For the particular error see
http://pondini.org/TM/Troubleshooting.html
Similar Messages
-
I keep getting this message: The backup disk image “/Volumes/Time Capsule/Coyner’s iMac.sparsebundle” is already in use. What should I do?
SeoulTom (Coyner)Make sure that no other Macs are backing up at the time
Pull the power cord from the back of the Time Capsule
Count to ten
Plug the power cord back into the Time Capsule
Wait a few minutes, then try a backup again
Check to make sure that you are running firmware 7.6.4 on the Time Capsule -
How do I fix this message from time machine: The backup disk image “/Volumes/Data/Jim Linnell’s Computer.sparsebundle” is already in use.
Restart the computer and your Time Machine backup system.
See also from More Like This:
what do I do about this time machine error message? The backup disk image “/Volumes/Data/Paul Brandow’s Computer.sparsebundle” is already in use.
Time Machine gives following error message;- The backup disk image “/Volumes/Data/JOE OTOOLE’s Computer.sparsebundle” is already in use. What does it mean? -
Please can someone tell me what is going on when I get this message for the Time Capsule?
Yes, this is because Lion or ML which you are using have lousy networking.
The trick is simply reboot the TC..
Or on Lion use the 5.6 utility and disconnect all users.
For ML sorry.. Apple decided you don't need that function any more!!.
http://pondini.org/TM/Troubleshooting.html
Read C12.. I think C17 is also related. -
When trying to use Time Capsule on my passport I get this message
The backup disk image “/Volumes/My Passport/EDS MAC.sparsebundle” could not be created (error 1).That should be a C9 or C17 error.. see
http://pondini.org/TM/Troubleshooting.html
Try rebooting everything.. as something has lost connection.. perhaps.
Make sure the disk is actually available in finder.. and try mounting it. -
I am trying to back up but get this message:
The backup disk image “/Volumes/Data/Dwight’s iMac.sparsebundle” is already in use.The link above is a good resource to use if the simple fix does not help.
Make sure that no other Macs are backing up the Time Capsule at the time
Pull the power cord from the back of the Time Capsule
Count to ten
Plug the power cord back into the back of the Time Capsule -
My time machine does not back up and giving me this error message: The backup disk image “/Volumes/Data-1/Amiel’s MacBook Pro.sparsebundle” is already in use. Pls help.
Make sure that there are no other Macs backing up at the present time.
Pull the power cord from the back of the Time Capsule
Count to ten
Plug the power cord back in
This will "fix" things about 98% of the time. Post back if you are in the unlucky 2% category. -
When my time machine tries to backup to my time capsule I get the following message"The backup disk image “/Volumes/Data/Kent’s MacBook Pro.sparsebundle” is already in use. " What do I need to do to fix this?
Restart the Time Capsule.
-
I am receiving the following error on my time machine, does anyone know what it means? Error message = The backup disk image “/Volumes/Data/Richard’s MacBook Pro.sparsebundle” is already in use.
Please look over the right of this page under the heading of More Like This for multiple answers and solutions for this bug.
-
Since upgrading my Macbook to Lion, the time machine backups are failing - error message: "The backup disk image “/Volumes/Jackie Scanlon's Time Caps/Jacqueline Drabczynska’s MacBook.sparsebundle” could not be accessed (error -1)." I have rebooted the TIme Capsule and it worked OK, but don't want to do that every time. Any suggestions? Thanks
Any new info on this?
I had the exact same problem and went crazy and spent a hecka lot of time trying to deal with my brand new 2TB Time Capsule and almost brand new MacBook Pro. Then I thought I fixed it...and I tried SO MANY things, I don't really know what did it...except taking out any apostrophe's in names of stuff that Apple puts in there...BUT...now it's back.
Grrr... -
So my time capsule is 1 year old exactly and now I am getting this message:he backup disk image “/Volumes/Data/alicia’s MacBook Pro.sparsebundle” is already in use. what does this mean and how do I fix it? i have 1.84T left of space. I have been using this time machine successfully for exactly one year and just now am having an issue.
Thanks,This error involves a complex procedure to remedy the problem:
Pull the power cord from the back of the Time Capsule
Count to ten
Plug the power cord back into the back of the Time Capsule
Wait a few minutes and try a backup -
Hi, I have backed up 2 IMACs and one Mac Book Pro but for some reason, the 3rd IMAC come up with this problem: The backup disk image “/Volumes/Data/Anthony’s iMac.sparsebundle” could not be accessed (error -1). Why? The computer system is up to date and I have had no issue with the other computers, just this one.
Many thanks
AnthonyTry this Discussion...
https://discussions.apple.com/message/18783684#18783684 -
I constantly get the following error message: The backup disk image "/volumes/data/jameskehoe.sparsebundle" is already in use. This Time Machine/Time Capsul worked perfectly before I left on a four month trip. Upon returning to my domicle it will not backup and I get the mentioned error message. My wife's Mac Book Pro continues to backup normally but she did not accompany me on this trip so her computer has always remained in contact with the Time Machine. My computer is a MacBook running 10.7.5
Any help solving this problem and letting me once again backup my computer would be greatly appreciated.This question is asked several times every day.. it is a bug.
Look at the more like this column to the right..
Solution is pretty simple..
With the TC hard disk not running.. you can feel the vibration ..
pull out the power cord.. count to 10.. plug in the power cord.
If you still have the problem report back.. mostly 98% of cases that will fix it. -
how to fix this error message The backup disk image “/Volumes/AirPort Disk/FARES DEL VALLE’s iMac.sparsebundle” could not be accessed (error -1).
The troubleshooting C17 is the specific article.
http://pondini.org/TM/Troubleshooting.html
This is generally a Lion error.. and you will need 5.6 utility to get access to the disk area.
So download the real utility. Run it instead of v6 toy version.
http://support.apple.com/kb/DL1482
Go to the manual setup, disk page and click on disconnect all users.. that will unmount all users connected to the disk and allow it to start working. But there are a number of other issues that are possible cause. Pondini lists some of them. -
When I try to backup I get the error message.The backup disk image"/Volumes/Data/iMac.sparsebundle" could not be accessed(error-1) Any Ideas? it was working fine and i can't think of any changes I made to the system to affect this?
Start with the best resource available..... Time Machine --- Troubleshooting from Pondini, the wizard of all things Time Machine.
" . . . sparse bundle could not be accessed (error -1)"
Maybe you are looking for
-
Mac Pro Kernel Panic while booted on install disk
I have a Mac Pro with 1 year and 2 weeks on the clock. No Apple Care. Started getting intermittent Kernel Panics about 2 weeks ago, which are becoming a real problem now. Happening every time I use the machine. I’m running 10.6.4 and just have the or
-
Text Mandatory only for Certain Materials in Sales Order
Is there anyway so that I can make certain item text mandatory only for certain materials? I tried creating new item category group and new item category. And then create new Text procedure making this text mandatory and assigning to this new item ca
-
Error in reciever file adapter , where i am getting file name dynamically
hi all, error in reciever file adapter , where i am getting file name dynamically, please help me in this isssue , i am trying for a long time MP: Exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: Exception in XML Parser (for
-
Selection dynamic Mapping Runtime Constant with a qualifier
Hello all, i want to access a Mapping Runtime Constant out of a message mapping specified with a qualifier. In the Integration Directory i specified in the identifier tab the following Value Pairs: Agency Scheme Name http://Sap
-
Firefox stops working after a short time of running, I keep getting a Net Error message
I am very frustrated with Firefox! I can load firefox fine in the morning, but after a short time it quits working & I get a Net Error message. I notice it most on Facebook! When I click like, it won't do nothing but sut there working, if open in a n