HT3275 I'm getting Unexpected error code 6584 when trying to launch Time Machine

I have added Time Capsule to my network and after set up receive an error message 6584 when trying to launch Time Machine

You need to verify the backups.. hold the options key whilst clicking the TM icon in the top menu area. Choose verify..
Look on the right for more like this.. it is a fairly standard error.

Similar Messages

  • Unexpected Error code -43 when trying to use Time Machine

    I purchased my Macbook Pro in September. At the same time, I purchased a 500gb Seagate Free Agent Go external drive. I finally decided it was time to put it to use and got this message when I attempted to start my Time Machine - Operation Could Not Be Completed - Unexpected Error (code -43).
    Any ideas what's up with this? Thanks for any input!

    Lovin' Mac wrote:
    I just came back to say that the purchase date was in 2009. And, I am unable to open the Time Machine program at all! That is the error I get when I open the program. I am thinking about re-installing Time Machine from my disk and see if that helps.
    I don't think that's an app you can install that way.
    But you can use the Pacifist app, from http://www.charlessoft.com/
    If your Install disc isn't 10.5.8, you should then download and install the "combo" update, to apply the updated bits to it. Info and download available at: http://support.apple.com/downloads/MacOS_X_10_5_8_ComboUpdate
    Be sure to do a +Repair Permissions+ via Disk Utility (in your Applications/Utilities folder) afterwards.
    And, as far as my drive goes - The awesome Apple rep at Best Buy formatted it for me when I bought it!
    Just to be sure, check that it's correct, per #C1 in the Time Machine - Troubleshooting *User Tip,* also at the top of this forum.

  • Keep getting an error code 13010 when trying to launch iTunes

    Unable to launch iTunes. 

    IMO Adobe  left  a Program out of the typically list namely Photoshop
    Troubleshoot Update Errors
    Many update errors are caused by missing or modified files required by Photoshop, typically by a disk cleanup utility (Ex: CleanMyMac, MacKeeper, etc). Make sure you have the latest updates for your clean-up utilities or discontinue use.
    Explanations of error codes:
    U = Updater.
    44 = Install Update Error
    M1 = Automatic
    M2 = Standalone mode
    P = Patcher
    6 = Done With Errors
    7 = Installation Failed
    ISSUE: Installation failed. Error Code: U44M1P7, U44M2P7, U44M1P6
    SOLUTION: Run the installer. Reinstall Photoshop CS6 to repair/replace the missing/modified file. Select Help>Updates… to run the updater again. http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html
    ISSUE: The adobe update 13.0.1.2 errors with code U44M1I210.
    SOLUTION: Restart your system, download and install the updates manually. See “Solution 3″ here. http://helpx.adobe.com/creative-suite/kb/error-u44m1i210-installing-updates-ccm.html
    ========================================================================================== ======================================================
    To fix the update install problems I've had with CC I use the direct installer I downloaded from Download New Adobe CC Trials: Direct Links (no Assistant/Manager) | ProDesignTools  Follow the download instruction to the letter otherwise you will be denied access.  Once to have it. Install CC on top of itself.   That will back level CC to  CC version 14.0.  Then use Photoshop menu Help>Updates.  All updates should install and all the extensions and addition you made to cc will still be there.

  • I'm getting an error code 9 when trying to restore apple tv 2 thru iTunes any suggestions?

    I'm getting an error code 9 when trying to restore apple tv 2 thru iTunes any suggestions?  the error comes up when itunes tries to verify the update.  I hook the apple tv back to tv and says I need to connect to itunes.  the original problem was the power went out and the apple tv light kept blinking.  I tried restarting it but would not work.  Any Suggetstions?  Thank you.

    Try again tomorrow.  All Apple servers are undergoing a huge number of hits.  I think tomorrow or even the next day, all upgrade and activation servers will be in better shape.
    Any time millions of people want to do exactly the same thing online, there's always trouble, LOL.

  • I'm getting an error code (A12E1) when trying to install Creative Cloud for photographers. Agraphers

    I'm getting error code A12E1 when trying to install the Creative Cloud app for photographers. Can anyone help me get installed?

    Hi Redrock,
    Could you try the solutions described here:
    http://helpx.adobe.com/creative-cloud/kb/a12e1-error-downloading-creative-cloud.html
    Thanks,
    -Dave B

  • I get an error code -12 when trying to install

    I was unable to unactivate it from the previous machine as the HD crashed. Now I get SDK error code -12 when the installer boots and then is crashes. How do I get LV on my new machine?
    I am on WIN 7 Dell E6400 
    The product is LV 8.6 for NI ELVIS II

    Hopefully you were able find the answer by searching.  If not, please refer to this KnowledgeBase article.  Instead of auto running the install CD/DVD, navigate to it manually and run Setup.exe.
    Alex Person
    NI-RIO Product Support Engineer
    National Instruments

  • After a full restore from Time Machine, I get "error code -6584" when trying to go into TM.

    I took our iMac in, at the direction of Apple, to have the hard drive replaced. When we got it back, I restored from Time Machine (on Time Capsule). One file on the desktop, a spreadsheet file, has reverted to a version five months old, with the loss of considerable data, so I don't know which files I can now trust. Also, when I try to go into Time Machine, I get "error code -6584" and am unable to access my backups
    This is potentially very very bad. What can I do?

    Solved:
    sudo chflags 0 /Volumes/"FCP Time Machine BU"
    sudo chown 0:80 /Volumes/"FCP Time Machine BU"
    sudo chmod 775 /Volumes/"FCP Time Machine BU"
    sudo chmod -N /Volumes/"FCP Time Machine BU"

  • I keep getting an error code U44M1P7 when trying to update camera raw

    Can anyone help? I keep getting an error code when trying to update my camera raw, and 3 other updates. I am using a mac.

    IMO Adobe  left  a Program out of the typically list namely Photoshop
    Troubleshoot Update Errors
    Many update errors are caused by missing or modified files required by Photoshop, typically by a disk cleanup utility (Ex: CleanMyMac, MacKeeper, etc). Make sure you have the latest updates for your clean-up utilities or discontinue use.
    Explanations of error codes:
    U = Updater.
    44 = Install Update Error
    M1 = Automatic
    M2 = Standalone mode
    P = Patcher
    6 = Done With Errors
    7 = Installation Failed
    ISSUE: Installation failed. Error Code: U44M1P7, U44M2P7, U44M1P6
    SOLUTION: Run the installer. Reinstall Photoshop CS6 to repair/replace the missing/modified file. Select Help>Updates… to run the updater again. http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html
    ISSUE: The adobe update 13.0.1.2 errors with code U44M1I210.
    SOLUTION: Restart your system, download and install the updates manually. See “Solution 3″ here. http://helpx.adobe.com/creative-suite/kb/error-u44m1i210-installing-updates-ccm.html
    ========================================================================================== ======================================================
    To fix the update install problems I've had with CC I use the direct installer I downloaded from Download New Adobe CC Trials: Direct Links (no Assistant/Manager) | ProDesignTools  Follow the download instruction to the letter otherwise you will be denied access.  Once to have it. Install CC on top of itself.   That will back level CC to  CC version 14.0.  Then use Photoshop menu Help>Updates.  All updates should install and all the extensions and addition you made to cc will still be there.

  • HT1338 I am getting and error code -39 when trying to download a movie on iTunes.  what does this mean?

    while trying to download a movie from the itunes store I am getting an error code -39.  I was able to download the itunes extra but not the movie.  What does the error code mean?

    Read here.
    http://support.apple.com/kb/TS1279

  • I get an error Code 85 when trying to download upgrade?

    When installing the update I get the Error Code 85? I am logged in and everything else is up to date.

    Hopefully you were able find the answer by searching.  If not, please refer to this KnowledgeBase article.  Instead of auto running the install CD/DVD, navigate to it manually and run Setup.exe.
    Alex Person
    NI-RIO Product Support Engineer
    National Instruments

  • I keep getting an error code 306 when trying to a reset for my iphone 4

    Every time I try to complete a backup and reset for my iPhone 4, I keep getting an error code 306. I have followed all of the suggestions given through the apple support websites, but nothing works. I am also having trouble downloading a recent purchase from the iTunes store to my computer. Again, I followed all of the suggestions listed on the website.

    IMO Adobe  left  a Program out of the typically list namely Photoshop
    Troubleshoot Update Errors
    Many update errors are caused by missing or modified files required by Photoshop, typically by a disk cleanup utility (Ex: CleanMyMac, MacKeeper, etc). Make sure you have the latest updates for your clean-up utilities or discontinue use.
    Explanations of error codes:
    U = Updater.
    44 = Install Update Error
    M1 = Automatic
    M2 = Standalone mode
    P = Patcher
    6 = Done With Errors
    7 = Installation Failed
    ISSUE: Installation failed. Error Code: U44M1P7, U44M2P7, U44M1P6
    SOLUTION: Run the installer. Reinstall Photoshop CS6 to repair/replace the missing/modified file. Select Help>Updates… to run the updater again. http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html
    ISSUE: The adobe update 13.0.1.2 errors with code U44M1I210.
    SOLUTION: Restart your system, download and install the updates manually. See “Solution 3″ here. http://helpx.adobe.com/creative-suite/kb/error-u44m1i210-installing-updates-ccm.html
    ========================================================================================== ======================================================
    To fix the update install problems I've had with CC I use the direct installer I downloaded from Download New Adobe CC Trials: Direct Links (no Assistant/Manager) | ProDesignTools  Follow the download instruction to the letter otherwise you will be denied access.  Once to have it. Install CC on top of itself.   That will back level CC to  CC version 14.0.  Then use Photoshop menu Help>Updates.  All updates should install and all the extensions and addition you made to cc will still be there.

  • I get a error code 1150 when trying to sync my ipod touch

    when syncing my ipod touch, i get an error code 1150

    See:
    iTunes Error 1150 while syncing music...: Apple Support Communities

  • Why do I get an error code 5002 when trying to redeem an iTunes gift card?

    I have an iTunes gift card and everytime I enter the redemption code I get an error code 5002.  Sure would like to be able to redeem my card.

    This alert is often the result of an issue with verifying your billing.
    Quit iTunes.
    Open iTunes.
    Test the issue.
    If it persists, sign in to store.apple.com using your iTunes account
    Click on Change account information
    Modify or remove your credit card information.
    Click Continue.
    Test the issue.

  • I get the error code -2146827284 when trying to run an Ecxel macro from LabVIEW.

    I am trying to insert data in an Excel workbook and then run a macro which I recorded in Excel to produce a plot.
    This worked great on a laptop running W2K + LV7 and Office 2000.
    I am now trying to do the same thing on a WinXP + LV7 + Excel 2002 and I get this error.
    The complete message is:
    "Error -2146827284 occurred at Exception occured in Microsoft Excel, Programmatic access to Visual Basic Project is not trusted
    . Help Path is C:\Program Files\Microsoft Office\Office10\1033\xlmain10.chm and context 0 in Excel Import Module.vi->LV report test1.vi
    This error code is undefined. No one has provided a description for this code, or you might have wired a number that is not an
    error code to the error code input."
    Can anyone shed some light on this. Running a macro is the obvious and easy way to get this work done.
    See the attached VI. It includes the macro and some sample data to run it on.
    Attachments:
    LV_report_test1.vi ‏46 KB

    Hi,
    I have attached a link to a document that discusses the error you are getting:
    Error -2146827284 When Importing a Macro to Office 2002/XP
    I hope this helps.
    Sincerely,
    Feroz
    National Instruments

  • I am getting an error code 54 when trying to sync

    I am getting an erroe code 54 can someone help me whith what the code means

    == Error -54 ==
    From an OS9 reference, error -54 is a software lock on a file or a permissions error. (Some of the old codes still apply to OSX although there is no formal list of OSX error codes.)
    First, try simply restarting your computer.
    iTunes Library cannot be saved (Error -54) - https://discussions.apple.com/thread/1912814
    Unknown error (-54) while syncing ipod - https://discussions.apple.com/thread/1082953 - problem was locked files
    Why does iTunes keep showing a -54 error when I sync my iPad? - https://discussions.apple.com/thread/3727114
    Error -54 possibly related to Touch Copy - https://discussions.apple.com/thread/3727114 - cleared by deleting preferences on iPad.

Maybe you are looking for

  • Outer Join logic

    The following code is an example of how to perform an outer join, in this case with ReportQuery (thanks Doug):         ExpressionBuilder eb = new ExpressionBuilder();         ReportQuery rq = new ReportQuery(Employee.class, eb);         rq.addAttribu

  • Standard Report layouts in Crystal 2008 for SBO 2007A

    It has been 2 years since SBO adopted Crystal Reports to become part of the standard product, I refer back to the initial links which promised links to Standard Reports, however 2 years later these links appear to be exactly the same, no updates. htt

  • Bdoc error : Plant IT01 is not assigned to any location

    Hi Experts, I have downloaded the Plants from r/3 to CRM [7.0] using object DNL_PLANT through /nr3as. I have checked the entries in /nCRM_LOCMAP, all plants are downloaded to CRM except IT01 & MS01. While downloading MATERIAL from r/3 to CRM, i am ge

  • IPod and scraches, how to fix them?

    I have a 5G (Video) iPod. I was SOO careful with it waiting to pick out the perfect case that would suit me and the way I use my iPod, but one day when I went to pick a case out I brought the iPod with me to the store in my pocket. After making my pu

  • Could anyone help me: Urgent!!!!!!!

    One of our user has this issue: Long back she has issued a check to vendor and it was not encashed till now.She wants to stop payment for that check and reissue it.Could anyone suggest how to do it.I will assign you points.Thanks in advance.