HT3275 I need help. Keep getting error message he backup disk image "/Volumes/Data/MacBook Pro.sparsebundle" is already in use.
I keep recieving he following error he backup disk image “/Volumes/Data/ MacBook Pro.sparsebundle” is already in use. for time machine backup. Any suggestions
It is standard for Lion and Mountain Lion.
Reboot the TC to fix it.
If you actually run Lion then you can install 5.6 utility and just go to the disk page and click disconnect all users.. this is usually enough to fix it.. on the previous backup TM hasn't dismounted the sparsebundle correctly and so cannot mount it again.
See C12. http://pondini.org/TM/Troubleshooting.html
Similar Messages
-
I constantly get the following error message: The backup disk image "/volumes/data/jameskehoe.sparsebundle" is already in use. This Time Machine/Time Capsul worked perfectly before I left on a four month trip. Upon returning to my domicle it will not backup and I get the mentioned error message. My wife's Mac Book Pro continues to backup normally but she did not accompany me on this trip so her computer has always remained in contact with the Time Machine. My computer is a MacBook running 10.7.5
Any help solving this problem and letting me once again backup my computer would be greatly appreciated.This question is asked several times every day.. it is a bug.
Look at the more like this column to the right..
Solution is pretty simple..
With the TC hard disk not running.. you can feel the vibration ..
pull out the power cord.. count to 10.. plug in the power cord.
If you still have the problem report back.. mostly 98% of cases that will fix it. -
HT3275 The backup disk image "/Volumes/Data/MacBook Pro.sparsebundle" is already in use.
My Time Machine has failed again with this message:
The backup disk image “/Volumes/Data/Shirley’s MacBook Pro.sparsebundle” is already in use.
How do I fix it?Pull the power cord from the back of the Time Capsule
Wait 60 seconds
Plug the power cord back in
This simple reset will fix this error 98% of the time. If you need more help, see this troubleshooting information:
The Backup disk image ... sparsebundle ... is already in use. -
The Green Light is on, on my time capsule and airport but it will not back up all i get is the following message below please help.
The backup disk image “/Volumes/Data/iMac-D49A20D0AE94.sparsebundle” is already in use.Welcome to Apple Support Communities
First, restart your iMac and your Time Capsule. In most of the cases, this should solve the problem.
If it doesn't work, read > http://pondini.org/TM/C12.html -
HT3275 The backup disk image "/Volumes/Data/MacBook Air.sparsebundle" is already in use.
I got this message when I wanted to back up on my Time Capsule. What can I do to solve the problem?
Thanks.Pull the power cord from the back of the TC
Wait a minute
Plug the power cord back into the back of the TC
Report on your results -
My Time Machine is not backing up and gives me this error report:
The backup disk image "/Volumes/Data/Valarie'siMac.sparsbundle" is already in use
Time Machine could not complete backup
Can anyone help me?Look at the discussion on the following forum:
https://discussions.apple.com/thread/3882138?start=0&tstart=0
The responses given there may help. -
We are Mountain Lion using Time Machine to backup to Time Capsule. When the backup tries to run, an error appears after a couple of minutes saying "The disk you inserted was not readable by this computer." Then an error shows up saying "Time Machine couldn't complete the backup to "Time Capsule.The backup disk image /Volumes/Data/MacBook Pro.sparsebundle could not be created (error 60)"
I low level reformatted the Time Capsule and that didn't fix it. I then tried using Time Machine on another computer to back up to that same Time Capsule and it worked- so I'm doubting it's the Time Capsule.
I've noticed that when Time Machine runs, that a folder called Data at /Volumes/ appears while Time Machine is trying to back up. I think it's making the sparsebundle to transfer to the Time Capsule.
However, after a couple of minutes- it comes back saying that the disk is unreadable.
I think it's something wrong with either creating the sparsebundle or opening the disk image that seems to be a part of the Time Machine backup process on the local drive.
I am able to create a disk image with Disk Utilitiy without any problem on that system. I've repaired the disk and disk permissions with Disk Utility and replaced the directory with Disk Warrior. I've trashed what preference files I could find and restarted. I've completely removed the backup destination from the computer and added it back again.
Help!
Thanks,
Neilneillhowell wrote:
I've noticed that when Time Machine runs, that a folder called Data at /Volumes/ appears while Time Machine is trying to back up. I think it's making the sparsebundle to transfer to the Time Capsule.
Yes, exactly. It makes one sparse bundle per Mac.
It's possible the TC's disk is too full for a new sparse bundle, or there may be some other problem.
Via the Finder, locate the existing sparse bundle (see the pink box in Time Machine - Frequently Asked Question #17 if you're not sure how to do that). See how large it is (plus how large anything else that may be there). If the total is very near the size of the TC, that may be the problem.
If not, a clue may be lurking in your logs. Use the widget in #A1 of Time Machine - Troubleshooting to display the backup messages from your logs. Locate the backup in question (probably the first one displayed), then copy and post all the messages here. -
This is the error message that comes up when my computer says that the time machine couldn't complete my backup. Does anyone know what this means?
Regards,
JbyrdksSee here...
The Backup disk image ... sparsebundle ... is already in use.
From Pondini’s excellent Information Here...
http://pondini.org/TM/Troubleshooting.htm -
I keep getting the message "The backup disk image “/Volumes/Donald Baker's Time Capsul/Donald Baker’s iMac.sparsebundle” could not be accessed (error -1). does anyone know what this means? My time capsule refuses to back up.
Time Capsule and Time Machine master guru Pondini has all the answers.
Check # C17 in his excellent support document Time Machine -- Troubleshooting.
http://Pondini.org/TM/Troubleshooting.html -
My time machine does not back up and giving me this error message: The backup disk image “/Volumes/Data-1/Amiel’s MacBook Pro.sparsebundle” is already in use. Pls help.
Make sure that there are no other Macs backing up at the present time.
Pull the power cord from the back of the Time Capsule
Count to ten
Plug the power cord back in
This will "fix" things about 98% of the time. Post back if you are in the unlucky 2% category. -
When I try to backup I get the error message.The backup disk image"/Volumes/Data/iMac.sparsebundle" could not be accessed(error-1) Any Ideas? it was working fine and i can't think of any changes I made to the system to affect this?
Start with the best resource available..... Time Machine --- Troubleshooting from Pondini, the wizard of all things Time Machine.
" . . . sparse bundle could not be accessed (error -1)" -
My time machine is not able to complete a backup, giving me this error message: the backup disk image “/Volumes/Data/Linda’s iMac.sparsebundle” is already in use. How do I fix this?
Stock standard issue.. asked 5-10 times per day here.. look at "more like this" on the right.
Simply reboot the TC ie pull out the power. .count to 10.. plug the power back in.
Maybe need to restart the network.. in order modem.. router .. TC.. clients. 2min gap.
See C12 http://pondini.org/TM/Troubleshooting.html -
I keep getting this message: The backup disk image “/Volumes/Time Capsule/Coyner’s iMac.sparsebundle” is already in use. What should I do?
SeoulTom (Coyner)Make sure that no other Macs are backing up at the time
Pull the power cord from the back of the Time Capsule
Count to ten
Plug the power cord back into the Time Capsule
Wait a few minutes, then try a backup again
Check to make sure that you are running firmware 7.6.4 on the Time Capsule -
So my time capsule is 1 year old exactly and now I am getting this message:he backup disk image “/Volumes/Data/alicia’s MacBook Pro.sparsebundle” is already in use. what does this mean and how do I fix it? i have 1.84T left of space. I have been using this time machine successfully for exactly one year and just now am having an issue.
Thanks,This error involves a complex procedure to remedy the problem:
Pull the power cord from the back of the Time Capsule
Count to ten
Plug the power cord back into the back of the Time Capsule
Wait a few minutes and try a backup -
I am receiving the following error on my time machine, does anyone know what it means? Error message = The backup disk image “/Volumes/Data/Richard’s MacBook Pro.sparsebundle” is already in use.
Please look over the right of this page under the heading of More Like This for multiple answers and solutions for this bug.
Maybe you are looking for
-
What is the best way to host an interactive PDF in a website?
I am making an interactive fashion magazine with DPS and I need it to be put into a website, but haven't found a simple solution yet. I am not very well versed with HTML, so something without too much of that would be good. What type of website would
-
How to alter the page header in mode_show_help?
How can I change the page header on the page that gets opened by calling mode_show_help? I'd like to have the help pages maintain the consistancy of the look of the portal. thanks, adam
-
Alternative ways to load Flash website
Hello, I have created a fully Flash website and as I continue to add images to my swf file obviously it is taking longer to load the site. I think I have created a pretty slick and straight forward preloader, but as I continue to add images to my sit
-
Rules file lodas only every 2nd row from .txt source
I have prepared a nice rules file, now deployed on the live server. when I copy it over to my dev it stops working because it loads only every SECOND row from my .txt source. Any ideas why that might happen? (I have no rejects specified)
-
IMovie to DV image breakup problems.
When I download a finished iMovie back to tape, I get a vertical pixe lated band on the left side of image and video noise over the entire image. This band is highly broken up into pixels making the video unwatchable. I am working in widescreen mode.