HT3275 Im getting the following error message when Time Machine is trying to backup: backup disc image/volumes/data/mycomputer.sparsebundle is already in use, how do I correct?
Im getting the following error message when Time Machine is trying to back up: backup disc image/volumes/data/my computer.sprasebundle is already in use. What does this mean? How do i correct? Thanks!
90% of the time, all you need to do is power off the Time Capsule, wait a few minutes, and power it back up.
If no luck, then go to the more sophisticated fixes in the link above.
Similar Messages
-
After reformatting my 1 Tb WD ext drive and tinkering with the "exclude these items" list, I now get the following error message from Time Machine: "Are you sure you want to back up to the same device your original data is on?" I've reformatted in Disk Utilities...not sure what I did wrong. Any help would be appreciated.
Not sure what you mean by "booted" from it.
If the Mac OS is installed on the external drive, then it's possible to start up from it, just as you do from your internal drive. Please open the Startup Disk preference pane in System Preferences, and verify that your internal drive is selected as the startup disk.
Assuming that's the case, then it may be that your TM settings have been corrupted. Turn off TM, then move or delete the file /Library/Preferences/com.apple.TimeMachine.plist. Turn TM back on, recreate your settings, and try again. -
Since updating OS to Mountain Lion from leopard, I get the following error message when trying to backup with time machine on external drive. "Could not complete backup to media share. The network backup disk does not support the required AFP features." What are AFP features and how do I get Time Machine to backup to my current external backup?
This means that your NAS does not support the required encryption. Update your NAS to the latest firmware or ditch it and buy a Time Capsule (they are the most reliable when using TM).
-
I keep getting the following error message when I try to update my itunes, "There is a problem with this windows installer package. Aprogram run as part of the set up did not finish as expected. Contact your support personnel or package vendor."
Yes, I had found a similar solution also. I'm running XP Pro, SP3. I went Control Panels/ Add-Remove programmes/apple software update/ change/ repair. Then run the 10.5 exe.
While the programme updated from version 8 of iTunes, my new iTunes is now a mess. Not all of my music was in the same folder previously but it all showed up on iTunes. Now many albums have been left out, some have only a few tracks and some have two copies of some tracks as well as having other tracks missing. I haven't begun to work on that. -
Just recently I am getting the following error message when trying to access web sites. I am using Firefox browser version 10.0.2. I get a pop up window stating "Exc in ev handl: TypeError: c.location is null" as the web site page is being displayed in browser winder. Then I have to click ok. It doesn't matter what web link/site I go to it happens. It is an issue with some plug-in?
I have advised McAfee's product team of the problem and this thread, and they're looking into it now.
-
I am getting the following error message when I try to import photos into iPhoto from my camera: "/private/var/folders/GB/GBl4wh8-ELqUVMI5dO-ryU TI/-Tmp-/iPhoto/DSCF2033.JPG". Have already tried removing and reinstalling iPhoto to no avail.
Does this happen if you try to Import to Library within iPhoto, or is it when you connect your camera (and which is set to automatically use iPhoto) that this error message occurs?
If you open Image Capture > Preferences is iPhoto selected as the choice when a camera is connected? -
I am trying to update my iTunes to 10.5.1 so that I can upgrade my 3GS phone but am getting the following error message when trying to install the itunes: Install step failed: Run pre upgrade script for apple mobile device support. Contact software manufacturer for assistance. I am on a MacBook pro running 10.5.8 OS. Has anyone seen this before and how can I get it resolved.
Thanks for your help in advance....Did you ever figure out the problem? "Contact Software Manufacturer"?? That sounds ominous... I've got the same issue and I'm pretty durn aggravated right about now....
Thanks! -
I get the following error message when trying to download ITunes on my computer running Windows XP - Error writing to file: C:\Program Files\Common Files\Apple Application Support\CFNetwork.dll
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there also links to backup and recovery advice should it be needed.
tt2 -
I get the follow error message when i try to update my Iphone on I Tunes " fireware is not capatible 2
got an anti virus that thinks it should scan email. Turn that function off.
Have a firewall, check that Thunderbird has full internet access, not some Auto rubbish that somehow fails. -
Hi,
I’m getting the following error message when ever I try to start cs6 and the program gets close.
“Adobe Photoshop CS6 has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available”
Please advise what is the problem? and How to sort this out?
OS Name
Microsoft Windows 8.1 Pro
Version
6.3.9600 Build 9600
Other OS Description
Not Available
OS Manufacturer
Microsoft Corporation
System Name
JARVIS
System Manufacturer
Dell Inc.
System Model
Inspiron N5110
System Type
x64-based PC
System SKU
To be filled by O.E.M.
Processor
Intel(R) Core(TM) i5-2450M CPU @ 2.50GHz, 2501 Mhz, 2 Core(s), 4 Logical Processor(s)
BIOS Version/Date
Dell Inc. A11, 8/3/2012
SMBIOS Version
2.6
Embedded Controller Version
1.01
BIOS Mode
Legacy
BaseBoard Manufacturer
Dell Inc.
BaseBoard Model
Not Available
BaseBoard Name
Base Board
Platform Role
Mobile
Secure Boot State
Unsupported
PCR7 Configuration
Binding Not Possible
Windows Directory
C:\Windows
System Directory
C:\Windows\system32
Boot Device
\Device\HarddiskVolume2
Locale
United States
Hardware Abstraction Layer
Version = "6.3.9600.17196"
User Name
Jarvis\JARVIS\Abhishek
Time Zone
India Standard Time
Installed Physical Memory (RAM)
4.00 GB
Total Physical Memory
3.16 GB
Available Physical Memory
1.21 GB
Total Virtual Memory
3.72 GB
Available Virtual Memory
1.55 GB
Page File Space
576 MB
Page File
C:\pagefile.sys
Hyper-V - VM Monitor Mode Extensions
Yes
Hyper-V - Second Level Address Translation Extensions
Yes
Hyper-V - Virtualization Enabled in Firmware
Yes
Hyper-V - Data Execution Protection
Yes
Display adapters:
and NVIDIA GeForce GT 525M.Without the actual crash logs nobody can say, but chances are that your graphics hardware is to blame, so update the driver...
Mylenium -
I get the following error message when trying to instal in copy: “Creative Cloud Installer” can’t be opened because the identity of the developer cannot be confirmed.
Mac Unidentified Developer Issue
Here's how to open apps that apple should not be blocking:
http://www.imore.com/how-open-apps-unidentified-developer-os-x-mountain-lion -
hi just got a gift of an ipod touch model MD720LLA with operating system iOS7.1.2
I get the following error message when trying to sync "could not be synced because the sync session failed to finish"
what could be the problem
have also uninstalled and re installed itunes
thanks
<Re-Titled By Host>Mac Unidentified Developer Issue
Here's how to open apps that apple should not be blocking:
http://www.imore.com/how-open-apps-unidentified-developer-os-x-mountain-lion -
I get the following error message when I connect a usb ethernet adapter to my new MacBook Pro: Unsupported - You cannot use an Apple USB Modem with this computer. I live where we only have dial-up and the Apple Store said this is what I need. In addition, when I connect the phone to the connecter it falls out, it will not click in.
Why are you using a usb ethernet adaptor? Just plug the modem into the usb port.
-
I have tried to add a hotmail account to Thunderbird because my Internet provider will stop e-mail support in the near future. I was able to add a hotmail account to Thunderbird, but I get the following error message when I try to receive e-mail in this hotmail account: "Configuration could not be verified – is the user name or password wrong?" (The hotmail website receives the e-mail.) User name and password is certainly correct. I have a 8.1 OS. Thank you.
got an anti virus that thinks it should scan email. Turn that function off.
Have a firewall, check that Thunderbird has full internet access, not some Auto rubbish that somehow fails. -
I get the following error message when trying to restore settings on my iphone:settings could be restored due to an unexpected error occurred (3014). anyone will be able to help please? thanks
Did you ever figure out the problem? "Contact Software Manufacturer"?? That sounds ominous... I've got the same issue and I'm pretty durn aggravated right about now....
Thanks!
Maybe you are looking for
-
All Images in Folder Changed to No Preview
At my company we have different work stations with our files stored on a XServe. Sometimes when a new folder is created onto the XServe and images are dropped into this folder, all of the images are changed to No Preview. Example, a photoshop image i
-
Hi all, My Acrobat 8 documents are only opening in 2-page view even when I select single page-continuous view. It displays my two-page documents bizarely. Any clues? Thanks a lot for your responses.
-
XI certification - 5 years expereince in ABAP
HI, I have 5 years of expereince in SAP ABAP? I am interested to learn either XI or BI and want to do certification as well? Can i directly attend the certification exam if i go through online materials ? I do not want to attend any classes for the
-
Just need to know how to move contents of a folder PLEASE :)
Hi all Need to know something?. I want to move the contents of a folder to another. I am using this code to move a file to another but how do I move the whole contents to another. public void moveBack() { try { selectedFileName = (String) O
-
hello ,, i have this problem many times why i don't know and i dont have jealbreak " Cydia " ok the messageis is : Error Message "This is not a Test User account - Please create a new account in the Sandbox Environment" how to solve this problem any