HT3275 power shot down during time machine back up

power shot down during time machine back up
and now my mac is not booting up

Ouch!
I'm assuming it was actually a restore? If so, was it a full system restore, or selected items?
What version of OSX are you running?
And, just to be sure, are you backing-up to a TIme Capsule? If not, what?

Similar Messages

I am trying to get space on an external hard drive which has some old time machine back up files that I do not need but can not eliminate, even by going into the time machine, clicking on the backup file to be eliminated and using the drop down eliminate

I am trying to get space on an external hard drive which has some old time machine back up files that I do not need but can not eliminate, even by going into the time machine, clicking on the backup file to be eliminated and using the drop down menu with the gear box symbol to eliminate

I cannot find this 300GB "Backup" in the Finder, only in the Storage info when I check "About This Mac".
You are probably using Time Machine to backup your MacBook Pro, right? Then the additional 300 GB could be local Time Machine snapshots. Time Machine will write the hourly backups to the free space on your hard disk, if the backup drive is temporarily not connected. You do not see these local backups in the Finder, and MacOS will delete them, when you make a regular backup to Time Machine, or when you need the space for other data.
See Pondini's page for more explanation: What are Local Snapshots? http://pondini.org/TM/FAQ.html
I have restarted my computer, but the information remains the same. How do I reclaim the use of the 300GB? Why is it showing up as "Backups" when it used to indicate "Photos"? Are my photos safe on the external drive?
You have tested the library on the external drive, and so your photos are save there.
The local TimeMachine snapshot probably now contains a backup of the moved library. Try, if connecting your Time Machine drive will reduce the size of your local Time Machine snapshots.

Down loaded Mavericks, will not install on my computer because it says "this hard drive is used for time machine back up".

Down loaded mavericks, it will not install on my computer because it says" this hard drive is used for time machine back up". So I used my old computer hard drive for back up and reloaded the program but it still says the first hard drive is being used.

Welcome to Apple Support Communities
Make sure you have selected your MacBook Pro's hard drive as the destination to install Mavericks. If so, you have the "Backups.backupdb" folder in the root level of your hard drive.
That's the folder used by Time Machine to store backups of your files, and the Mavericks installer understands that your internal hard disk is the Time Machine drive.
To fix this, open a Finder window, select the Go menu (on the menu bar) > Go to Folder, and type:
Then, delete "Backups.backupdb", empty the Trash and run the Mavericks installer. Finally, install OS X Mavericks

After Time Machine backs up my file vault files (after logging out), when I next log into the user account it beachballs permanently during log in.

After Time Machine backs up my file vault files (after logging out), when I next log into the user account it beachballs permanently during log in. The backup was successful, as I had to restore after this issue last time. Hard resetting doesn't resolve the issue. Is there a Time Machine setting that I should be aware of?
I have 2011 13" MBP, 10.6.8 and use an external hard drive connected via USB for my Time Machine backups.
Thanks

I was able to get it to work. Thanks for your help. It's unfortunate the two applications do not work well together. This is what I did:
1) Safe boot and logged into the affected user (since the whole issue damaged the account's system settings).
2) Turned off File Vault in System Preferences. I needed to make some space on the hard drive first since apparently the total free space on the hard drive has to equal or exceed the amount of data currently in the file vault. I deleted some files and moved others to the Admin account. This whole process took awhile.
3) Finally, just restarted and logged in. The next time machine backup seems to be a significant backup, I assume because it's backing up the user account in a different way now that File Vault is turned off.
Thanks again!

HT3275 time machine back up not completed due to backup disk image "/volumes/data/.....imac.sparsebundle" is already in use. How do I fix?

time machine back up not completed due to backup disk image "/volumes/data/.....imac.sparsebundle" is already in use. How do I fix?

Pull the power cable from the back of the Time Capsule
Wait a few minutes
Insert the power cable back in the back of the Time Capsule
This will fix the problem 90% of the time. If no luck, see #C12 in this great support document by Pondini:
http://pondini.org/TM/Troubleshooting.html

HT3275 where did my time machine back up go to on new hard drive?

Hi, I recently had hard drive fail on my late 2006 iMac. Had a new hard drive installed. Restored my computer from the most recent time machine back up from my external drive, but can't find restored data on iMac. Any ideas?
Went to the latest backup and hit 'restore' took about 2.5 hours for the data to transfer to new hard drive. I can tell it's chewing up the new hard drive space but the data/profile from my old mac is nowhere to be found on the new hard drive.

It might have created a new user and loaded under that.. new user being the old user. But if you have issues do it again, only this time pick where the backup will go.
http://pondini.org/TM/16.html
The other questions might also be relevant as a new hard disk will make the Mac appear to the TM backup as a new computer.
See 14-18 for restore info.

HT3275 Can some HELP, I keep getting this error with my Time Machine Back up, "The backup disk image "/Volumes/JKPN Safe/JKPN IMAC.sparsebundle" is already in use.

Can some one HELP me , I keep getting this error with my Time Machine Back up, "The backup disk image “/Volumes/JKPN Safe/JKPN IMAC.sparsebundle” is already in use.

See > http://pondini.org/TM/C12.html

HT3275 does time machine back up email?

Does time machine back up all the emails in your apple mail?

Yes, assuming of course, that you have not specifically excluded Mail from backups.

HD failure with neither time machine back-up or OSX install working

Hi,
I recently had the OEM HD fail on my Mac book pro resulting in the blinking folder question mark on startup. I purchased a new intel SSD to replace it and it installed it in the laptop. I then performed the command + r on boot and went through the system recovery from network. This seemed to be working fine at first and I was able to open the disk utility after load, I created a single partition on the SSD and then was able to verify successfully. I then closed this window and tried to restore from a time machine back up on an external hard drive. About 30 seconds after it started, it returned an error saying that it was unsuccessful and to restart the computer. I accepted and then it rebooted.
I power cycled the system and again tried the command + r on reboot. This time I first erased the new SSD from the disk utility and then proceeded to create the partition. This time I tried the option to load the OSX and did not plug in the external HD. It began to download from the network and looked to be working fine. However, at some point about 1.5-2 hours later it looks like the system reset itself and came up with the flashing folder with a question mark.
When I power cycled the system for a third time to check the disk again it gives a white screen and command + r does not do anything. I tried resetting the PRAM which the system responded to the option+ command+ p+r and rebooted but it still returns to this white screen. In order to check if it was the SSD that was the problem I opened the computer again and disconnected the SATA cable from the SSD. Then with the SSD disconnected at boot I was able to attempt a system recovery from network using the command + r.
Does anyone have any advice or did I just end up ruining the $200 SSD?
Thanks in advance.

Followed the directions on this page and it worked!
http://forums.macrumors.com/showthread.php?t=1102423
Part One - Turn on SSH (in the admin panel)
[1] Go to to http://mybookworld.local
[2] login: username will be admin, password will be whatever you have setup. If you can't remember it should be in your Mac OS X keychain (Utilities > Keychain Access, search for "mybookworld"). If you have not changed if from the default the password will be admin as well.
[3] Switch to advanced mode.
[4] From the System tab, pick Advanced.
[5] Enable SSH Access, and click submit.
[6] Click on the network tab and then the LAN button
[7] Make a note of the IP address
Small, maybe obvious, but nevertheless important point: For the install to work, your NAS needs to be connected to a router with internet access.
Part Two - Install netatalk2.2
[8] Open Terminal.app (Utilities > Terminal)
[9] Enter the following command (substitute in 127.0.0.1 for the actual IP address you noted down in step 7), then hit return:
Code:
ssh [email protected]
[10] When prompted, enter the ssh password (will be welc0me).
[11] You are now going to download the installer. Enter the following command, then hit return:
Code:
wget http://mybookworld.wikidot.com/local--files/netatalk2-2-on-whitelight/install_netatalk.sh -O install_netatalk.sh
[12] Once completed, you will need to run the installer. Type:
Code:
sh install_netatalk.sh
[13] You will be asked a number of question during install, answer yes to all. When asked about the "DHX2 login process", I opted to install the modified version, so I can confirm it works.
[14] Once the box has restarted, you should be able to connect to your afp shares and continue to use Time Machine.

My Macbook Pro will not boot up. How can I get to the time machine back up?

When I turn on my Macbook Pro, it gets to the gray screen with the Apple logo and the spinning beach ball and stays there. I use Time Machine with a Seagate external harddrive to back up my files. I at first thought recovery meant using Seagates's Replica software, so I followed the instructions, inserting the recovery CD and booting up to the C drive. The Seagate tecnical support person informed me that I was in error and that because I was using Time Machine, the Replica recovery CD would not be useful to me. Now I have two problems. I can't boot up, and I can't get the Replica CD out of the C drive. So I have several questions. How do I remove the CD? There doesn't appear to be a place to use the old paper clip method. Once I've removed the CD, how do I reinstall the OS? I don't seem to have a hard copy of Mavericks that should have come with this laptop.

historyrocks wrote:
How do I remove the CD?
Restart, hold the mouse button down as it boots, it should be ejected.
historyrocks wrote:
Once I've removed the CD, how do I reinstall the OS? I don't seem to have a hard copy of Mavericks that should have come with this laptop.
Lets take this step by step…
Once the disk is ejected see if 10.9 can boot normally.
If that fails let us know what happened.
Power off & disconnect your Time Machine disk and any other external disks just for now (so we know it is safe & not causing this issue).
Reboot & hold alt - it will take you into the 'boot picker' it will list all available boot disks. Make a note of how many disks appear and what the names are - let us know here.
You could try picking the 'recovery partition' if available. That should eventually show you a screen where you can select Disk Utility in the list of options…
In Disk Utility select the 'boot disk' – this is usually the item above 'Macintosh HD' (or whatever your boot disk is called).
Select the 'First Aid' tab
Repair any disk damage that is reported via 'verify'. Then select the 'Macintosh HD' & repair the permissions too.
Recovery mode explained…
http://support.apple.com/kb/HT4718
If you have no recovery partition you can use 'Internet recovery mode' (Command+Option+R at startup) - this downloads enough to repair & install 10.9. Try to use an ethernet connection for the internet - it can be many times faster & more stable than wifi.
Once that completes reboot, hold alt & select your main boot disk (maybe Macintosh HD) if it is available.
The recovery partition can also be used to download & install 10.9.3. However you should probably see what state the Mac's boot disk is in. It's possible that erasing & reinstalling is the only option. If you go down this route you can restore the Time Machine backup, but it's better to see if it can be fixed first.

Is it possible to change the read/write permissions on a time machine back-up of iTunes? I need to restore it, but old version is locked....

Is it possible to change the read/write permissions on a time machine back-up of iTunes? I'm needing to restore it as my phone deleted half our playlists during sync & am not seeing a way to unlock the permissions. I have the current version unlocked, but can't seem to get the backed-up version. When I click on restore I get a pop-up that says iTunes can't be deleted as it is part of the OS. I'm not even trying to delete, just restore the old version. Any suggestions?

Hmmm, ok I'll give it a shot. I've always had the iTunes sync w/ my phone set up to only load selected playlists to the phone b/c there's a lot more in iTunes than I have room or desire for on my phone. A few months back I started having trouble w/ trying to sync everything & subsequently adding more to the phone than it could hold. The quickest thing at the time was to unclick the sync music option in iTunes so I could still backup the phone to the computer & not have a problem.
When I asked about it during one-to-one session shortly after, they advised me to delete the music off my phone & then re-sync it to the computer, run a backup of the phone & redownload the music to the phone. When I tried this it ended up deleting all my playlists (but not my husband's) from iTunes. Irritating, but I've been rebuilding the playlists since. I had also unclicked sync music again & an Apple person told me the most likely best fix was to delete & reload iTunes completely.
A few days ago I realized I hadn't backed up the phone to the computer in over a month so after deleting & reinstalling iTunes, & w/o changing anything (sync music was STILL unchecked) I ran a backup & my phone went from having 4 GB free space to being 2 GB over capacity due to iTunes trying to download the entire music library to the phone. I made a one-to-one appt again & it was suggested AGAIN that I delete all the music off my phone & then resync it to the computer & redownload the music. We did this (though a few random songs that had previously been purchased somehow remained on the phone), I got home, connected the phone & instead of the music that shows as 'on my device' disappearing from iTunes it just sat there, so, as the guy had told me I MIGHT have to do, I threw all those songs showing in iTunes as being on my phone, in the trash so that it was completely clear.
At this point I checked sync music, made sure the options were 'selected playlists only', checked the ones from my own list that I wanted (I usually have one playlist of comedians from my husband's folder that I also have on the phone, but didn't check it at this point). It uploaded all my stuff just fine, but for whatever reason when it saw that I wasn't uploading that comedy playlist any longer, it not only didn't upload it but proceeded to delete my husband's entire folder of playlists from iTunes. -_- I got on the phone w/ an Apple support person right away but he wasn't able to tell me anything .. basically said we'll have to rebuild everything. I asked about the possibility of using time machine, he said he's not qualified to answer that, so that's when I started looking around online & found, among others, the link I referenced a couple replies ago.
I hope this all makes sense. It's been a long-term issue so I'm trying to go from memory as I figured to begin w/ that I had just made a mistake somewhere, so didn't try to document anything. Now w/ it having happened a 2nd time, I'm not sure if it was 'user error' or something else.......

Western Digital My Book World EditionI have bought a WD My Book World Edition to use for back-up of my iMac, but when I try and log onto the drive with Apple time Machine (back-up software) or connect in any other way i get the message 'There was a proble

I have bought a WD My Book World Edition to use for back-up of my iMac, but when I try and log onto the drive with Apple time Machine (back-up software) or connect in any other way I get the message 'There was a problem connecting to the server "MybookWorld.local" The version of the server you are trying to connect to is not supported. Please contact your system administrator to resolve the problem'
It is a brand new iMac and running Lion OSX
Any ideas on how to solve would be gratefully received?

Followed the directions on this page and it worked!
http://forums.macrumors.com/showthread.php?t=1102423
Part One - Turn on SSH (in the admin panel)
[1] Go to to http://mybookworld.local
[2] login: username will be admin, password will be whatever you have setup. If you can't remember it should be in your Mac OS X keychain (Utilities > Keychain Access, search for "mybookworld"). If you have not changed if from the default the password will be admin as well.
[3] Switch to advanced mode.
[4] From the System tab, pick Advanced.
[5] Enable SSH Access, and click submit.
[6] Click on the network tab and then the LAN button
[7] Make a note of the IP address
Small, maybe obvious, but nevertheless important point: For the install to work, your NAS needs to be connected to a router with internet access.
Part Two - Install netatalk2.2
[8] Open Terminal.app (Utilities > Terminal)
[9] Enter the following command (substitute in 127.0.0.1 for the actual IP address you noted down in step 7), then hit return:
Code:
ssh [email protected]
[10] When prompted, enter the ssh password (will be welc0me).
[11] You are now going to download the installer. Enter the following command, then hit return:
Code:
wget http://mybookworld.wikidot.com/local--files/netatalk2-2-on-whitelight/install_netatalk.sh -O install_netatalk.sh
[12] Once completed, you will need to run the installer. Type:
Code:
sh install_netatalk.sh
[13] You will be asked a number of question during install, answer yes to all. When asked about the "DHX2 login process", I opted to install the modified version, so I can confirm it works.
[14] Once the box has restarted, you should be able to connect to your afp shares and continue to use Time Machine.

Brand new Mac, had to erase drive through disk utility as time machine back up failed. Now disk utility only has the option to install Mountain Lion which my Mac won't allow. Anyone any ideas as my Mac won't load anything up but disc utility!

Brand new Mac, had to erase drive through disk utility as time machine back up failed on initial setup, USB cable popped out Now can only access disk utility as won't load to log in screen. The only has the option in disc utility is to re-install Mountain Lion which my Mac won't allow or loading another time machine back up but after an hour of it processing, that didn't resolve the issue either! The time machine back up is the latest back up of my Mac Book Pro which was using OS X Maverix. I'm guessing I'm going to have to take my Mac to the store but that would be a hassle so does anyone have any ideas?

Follow this guide using another Mac.
Insert your newly created Mavericks USB into you Mac, press the power button and then hold down 'option,' until it gives you an option to boot from the USB. You will then be able to erase the internal disk with Disk Utility and reinstall Mavericks straight after.
After that you should be able to use Migration Assistant to restore your applications and user data.

FW800 GTech drive as Time Machine Back up - Leave on all the time?

My GTech Q FW800 external drive is my time machine back up - Can I leave this on all the time and boot up and power down my iMac or do I need to "Unmount" it all the time?
Thanks,

You do not need to unmount the backup drive at all unless you wish to disconnect it

Finder Freezing when time machine back up files

I've an 24 aluminium iMac. The finder often freeze (once a day at least) and I noticed that this is often when Time Machine is backing up files.
It's impossible to relaunch the finder and sometimes other mac apps are freezing (preferences etc..). On the dock I can still see that the finder and the apps are active but in fact there are frozen and it is not possible to force quit.
Then if I shut down the computer through the apple menu it doesn't work and the only solution is to shut down manually my iMac with the back button.
Be that as it may it is less frequent since the iMac last software update (graphic card) before everything on the screen was freezing.

I have a 1tb and 540 tb Ultramax Harddrive to support my Mac Pro G5. I originally bought the 650 when the G5 was running Tiger and it worked without fault on a 800 firewire. I partly purchased this model of drive as they advertised its extendibility. When time machine was announced I purchased a second 1tb version and installed the two drives running daisy chained by 800 firewire and they worked fine. Maybe 2 weeks after installing Leopard which had caused me problems because of the application enhancer i was not ready to use time machine so declined to switch it on.
After a few weeks and after the 650 had dismounted itself i started to find after waking from sleep the mac was frozen. There was no way out other than switch it off on the front switch. I later discovered that on powering down the 650 ultramax I could recover my processes but at the danger of corrupting the drive by not removing it properly. As I tried to work out an exit strategy to save data on the 650 I got a system warning to say the Ultramax was beyond repair and was available only to recover files. Eventually it started hanging after a few seconds so i had no choice but to lose data and reformat the drive. That failed and having already contacted Iomega support for advice with little support they eventually agreed the drive had become damaged and agreed to replace the unit.
With the new unit I expected the problem would be gone.. but it was a matter of hours before the symptoms re-emerged, not as bad as before they seemed to allow other apps to continue to run and work it just disabled the finder so i could open an application from recent apps but not through a finder window and if i asked it to open or save a file it would lock the application so much not even a three fingered quit would solve the problem it would close the app in the finder but in the close app window it would remain listed as not responding.. the only way to recover use of the mac was to power off the ultramax almost on loosing power all hanging functions would re-emerge sometimes i needed to switch the mac off.
I decided to risk setting time machine on and although it worked it hung on the first back up and ever since I have woken up the mac as i run a very eco friendly power management policy I would find the hang accompanied by time machine backing up.
I am sure time machine is part culprit in this problem although i cant work out why only the 650 suffers I have tried taking it off firewire and moving to usb and it still does the same....
Any ideas or pointers to an answer of any sort would be welcome

HT3275 power shot down during time machine back up

Similar Messages

Maybe you are looking for