HT3275 Sparsebundle already in use?
Hi
I get the following warning
"Time Machine couldn’t complete the backup to “JAOC Wireless”.The backup disk image “/Volumes/James & Anna Treadwell's Ti/Anna’s MacBook Air.sparsebundle” is already in use"
Can anyone tell me how to solve this?
Thanks James
The old backup never released the user properly.. so as far as the TC is concerned the user is still connected but the computer is trying to connect again and is refused as already connected. This is the most MOST common issue report here 10 times per day since Mountain Lion.. Please look at More Like This column on the right.
Simple solution is reboot the TC or the whole network, in correct order restart modem.. router /TC.. clients .. 2min gap.
Read c12 http://pondini.org/TM/Troubleshooting.html
Welcome to Mountain Lion !!
Similar Messages
-
TS1550 timemachine won't backup because sparsebundle already in use
timemachine stopped backing up because sparsebundle already in use how do i correct this?
I was having this same problem. I had turned on an old Macbook briefly and then turned it off. It must have been doing a backup at the time, because my newer Macbook Air could no longer do a backup because the sparsebundle was in use.
I followed crandyhill's suggestion above, and that solved everything. I had to open Airport Utility 5.6, click on manual setup, click on the disks tab, click on disconnect all users.
That solved the problem, and now my Air is doing regular backups again. -
Time Machine backup not completed because the "backup disk image"/Volumes/Data/MacBookAir.sparsebundle" is already in use. ??
Reboot the TC.. this is most common issue since Mountain Lion.
Look at the More Like This just on the right column. -
HT3275 getting already in use when backing up iMac to Time Machine
I'm getting the following error when trying to backup to my iMac to my Time Machine, and I think it might be related to the MacBook I purchased yesterday and connected it to the same Time Machine.
The backup disk image “/Volumes/Data-1/Martin’s iMac.sparsebundle” is already in use.
Any suggestions on how to determine the problem and resolution?
MartyA computer is holding open a connection which is stopping other computers from working.. or you have loaded the sparse bundle in finder and it is not being unmounted.
Go to the airport utility.. (5.6 if Lion) and manual setup.. disks page.. disconnect all users.. you will then be able to use the device.
I am assuming Time Machine means Time Capsule.. it is a common mistake.
There are a number of other issues that cause the problem but that is the most common.
Some more info here.
http://pondini.org/TM/C17.html -
Time machine error - backup fails due to sparsebundle already in use
Since upgrading, Time machine reports backup error:
TIme Machine Error
The backup disk image ...sparsebundle is already in use.
Any thoughts?Thanks russ. After the initial upgrade to Mt Lion, no backups have been made. Every attempt reports the sparsebundle error. I recently updated to 10.8.1 and a whole new set of problems have shown up which is having me question the wisdom of continuing to invest in Apple product.
I have decided to pack it in with regard to the timecapsule product, as it is just too unreliable, and certainly not worth the continued time and effort it has been taking to try and get it to work. I have instead gone with an online backup service, Crashplan. I have the backup service I am seeing and I am no longer frittering away valuable time on something that ought to just work.
Problem solved. -
Time Machine Stopped working "sparsebundle already in use"
I have been using time machine for years on my MBP. It worked fine on 10/1/12 and then on 10/2, I starts searching and I get this message.
"Time Machine coundn't complete the backup to TC - the backup disk image/voluems/TM MBP TC BU-1/MBP BCC 13inch.sparsebundle is already in use"
TM MBP TC BU-1 is my designation...
I need help and really would appreciate any assistance.
SkipPull the power cord from the back of the Time Capsule
Count to ten
Plug the power cord back into the back of the Time Capsule
This simple reset will fix this issue 98% of the time. If you are in the unlucky 2% category, more help is here:
The Backup disk image ... sparsebundle ... is already in use. -
HT3275 What does sparsebundle already in use mean?
I have two Macbook pros in use on this time capsule. I only get this message from one of the laptops. Any suggestions?
It means that you need to power off the entire network....all devices....in any order that you wish.
Wait a minute, then start the modem first and let it run a full minute or two by itself
Start the main router next, which may be your Time Capsule and let it run a minute
Continue starting devices one at a time about a minute apart until everything is powered back up.
Check Time Machine again from both Macs -
Error message when trying to back up from iMac to Time Machine says "sparsebundle already in use"
This is a screen shot of the error message I get. I don't know what a "sparsebundle" is much less how to find and/or fix it! Can anyone help???
First, restart the iMac and your Time Capsule. In most of cases, this should solve the problem.
If it doesn't work, read > http://pondini.org/TM/C12.html
This is caused by a bug in Lion and Mountain Lion. This could also mean that you have another Mac and you are using the backup file of your iMac with that computer -
My back up to time machine is not occuring and I am getting the message: sparsebundle already in use. Any Clues?
This is the most common error on Mountain Lion.. at least 5 and up to 10 times a day.. I wish we had a proper method of referencing these errors.
Simply reboot the TC.
Read C12 here.
http://pondini.org/TM/Troubleshooting.html -
I received this error message when trying to use my time capsule. Macbook Air.sparsebundle already is use. What does this mean?
First, restart the MacBook Air and the Time Capsule. In most of the cases, this solves the problem.
If not, see > http://pondini.org/TM/C12.html -
Time Capsule "Is already in Use" error
My Time Machine app keeps coming back with the message "the backup on Time Capsule is already in use" and does not do new backups. I'm operating Maverick's and using Time Capsule to back up both a laptop and MacMini. I can get it to back up again only by unplugging the Time Capsule and plugging it back in.
What do I do?Time Machine: sparsebundle Already in Use or Cannot be Accessed
-
I am getting the message that "the backup disk image '/volumes//data/ ---'s MacBook pro.sparsebundle" is already in use. ---"s is my administrator designation. I don't know what this means or what I should do. My husband and I both use the same time machine with our MacBooks. It is our router for our home network although for the most part our computers are separate. We share an email site, and some files. I am concerned that we are not backed up securely
Most common message in history of the TC.. something has failed to unmount.. Lion and esp. Mountain Lion are affected.
Simple way.. reboot the TC to lose the connections..
Might take a network reboot.
That means restart the whole network from off.. start in order, modem.. router/TC.. clients. 2min gap between them.
But from 5.6 utility you can disconnnect all users.
Read C12 here. http://pondini.org/TM/Troubleshooting.html -
My time machine does not back up and giving me this error message: The backup disk image “/Volumes/Data-1/Amiel’s MacBook Pro.sparsebundle” is already in use. Pls help.
Make sure that there are no other Macs backing up at the present time.
Pull the power cord from the back of the Time Capsule
Count to ten
Plug the power cord back in
This will "fix" things about 98% of the time. Post back if you are in the unlucky 2% category. -
Time Machine did not back up:
Time Machine Error; ("The backup disk image "/Volumes/Data/My MacBook Pro.sparsebundle" is already in use.")
How do I correct this issue?
Thanks!You need to be careful Bob.. people might take this literally.
Bob Timmons wrote:
How do I correct this issue?
Call the exterminator to get rid of the bugs in Lion and Mountain Lion.
https://discussions.apple.com/thread/5222487?tstart=0 -
I'm getting the following error message from my Time Machine for two days now:
"The backup disk image “/Volumes/Backup Files/Burke iMac.sparsebundle” is already in use."
I haven't changed anyting lately and can't find the problem...Try just rebooting the TC.. or restart of the whole network, in correct order.. modem.. router/TC.. clients.
Read C12 here.
http://pondini.org/TM/Troubleshooting.html
Look at the more like this on the right. it is a very common problem.. especially since ML we have this question 5 times every day.
Maybe you are looking for
-
3 libraries/devices, one apple id, sync help?
My iPod touch was connected to an itunes library on a desktop computer which crashed several years ago, my iPhone's library was synced with my dell laptop's itunes which also crashed, but when I replaced the hard drive I my new iTunes was just some o
-
How to connect to a specific database in SQL server
Hi, How can I connect to a specific database in SQL server? I used the following statement. But my table is inserted to the 'master' database in the SQL server. How can I insert my tables to the specific database tahta I have created before? Connecti
-
My ipod touch fourth generation cannot connect to my pc for me to back it up because i havent typed in the passcode i am unable to type it in because of my "white screen" is there any possible way i could do this without a passcode?
-
Need Report based on "CUSTOM DATA field @ Shop Order Maintenance"
Need the REPORT based on CUSTOM DATA field. Requirement - I am having the CUSTOM data at Shop Order Maintenance that is called as XXX, I need some report in SAP ME which can display the SFC related to particular Shop order based on XXX Number.
-
Using File Share creates another .motn file.
Whenever I use the share feature under File to save out a H.264 file it also creates a Motion project file in the directory with the render. Is there a reason for this? I end up with tons of these duplicate files I have to clean up.