HT3275 Sparsebundle is already in use
I am getting a message from the Time Capsule which says that the Sparsebundle is already in use so the backup cannot be completed. I have no idea what this means and can anyone provide me with a solution to this problem?
Look at More Like This .. on the right.. this is the most common error reported in this discussion area.. 5-6 times min per day..
Reboot the TC.. the dumb TC and the even dumber Mountain Lion have divorced.. you need to remarry them.
Reboot, = pull out the power.. count to 10.. plug the power back in.
You might need to reboot the network.. restart in order.. Modem.. TC.. clients ...=2min gap.
See C12 for more info.
http://pondini.org/TM/Troubleshooting.html
Similar Messages
-
I am getting the message that "the backup disk image '/volumes//data/ ---'s MacBook pro.sparsebundle" is already in use. ---"s is my administrator designation. I don't know what this means or what I should do. My husband and I both use the same time machine with our MacBooks. It is our router for our home network although for the most part our computers are separate. We share an email site, and some files. I am concerned that we are not backed up securely
Most common message in history of the TC.. something has failed to unmount.. Lion and esp. Mountain Lion are affected.
Simple way.. reboot the TC to lose the connections..
Might take a network reboot.
That means restart the whole network from off.. start in order, modem.. router/TC.. clients. 2min gap between them.
But from 5.6 utility you can disconnnect all users.
Read C12 here. http://pondini.org/TM/Troubleshooting.html -
My time machine does not back up and giving me this error message: The backup disk image “/Volumes/Data-1/Amiel’s MacBook Pro.sparsebundle” is already in use. Pls help.
Make sure that there are no other Macs backing up at the present time.
Pull the power cord from the back of the Time Capsule
Count to ten
Plug the power cord back in
This will "fix" things about 98% of the time. Post back if you are in the unlucky 2% category. -
Time Machine did not back up:
Time Machine Error; ("The backup disk image "/Volumes/Data/My MacBook Pro.sparsebundle" is already in use.")
How do I correct this issue?
Thanks!You need to be careful Bob.. people might take this literally.
Bob Timmons wrote:
How do I correct this issue?
Call the exterminator to get rid of the bugs in Lion and Mountain Lion.
https://discussions.apple.com/thread/5222487?tstart=0 -
I'm getting the following error message from my Time Machine for two days now:
"The backup disk image “/Volumes/Backup Files/Burke iMac.sparsebundle” is already in use."
I haven't changed anyting lately and can't find the problem...Try just rebooting the TC.. or restart of the whole network, in correct order.. modem.. router/TC.. clients.
Read C12 here.
http://pondini.org/TM/Troubleshooting.html
Look at the more like this on the right. it is a very common problem.. especially since ML we have this question 5 times every day. -
The backup disk image “/Volumes/Data-1/Joe Sykes’ Computer.sparsebundle” is already in use.
First, restart the Mac and the Time Capsule. In most of the cases, this will solve the problem.
If it doesn't work, see > http://pondini.org/TM/C12.html -
My back up is no longer working. The errors that come up are "The backup disk image “/Volumes/Data/apple’s iMac.sparsebundle” is already in use." Does anyone know what this means?
It means that there are bugs in the operating system.
Pull the power cord from the back of the Time Capsule
Count to ten
Plug the power cord back into the back of the Time Capsule
Report back if you need further assistance -
The backup disk image “/Volumes/Data/Connie’s iMac.sparsebundle” is already in use. Time Machine has stopped backing up. I deleted the selected disc and re-selected which one to use. Not sure what else to do.
Pull the power cord from the back of the Time Capsule
Count to 10
Plug the power cord back into the Time Capsule
Count to 45 to allow the Time Capusle to fully restart
Report on your results -
I have a time capsule that I use for my apple computers. My iMac has no problems but my Mac mini keeps getting this error for backups:
The backup disk image “/Volumes/Data/JIP’s Mac mini (2).sparsebundle” is already in use.
What do I do?Please shift the focus of your eyes to the right side of this page to find the heading of More Like This. There are multiple answers and solutions there.
-
HT3275 I get the error: MacBook Pro.sparsebundle" is already in use.
I have my Macbook Pro and my iMac trying to back up to the same Time capsule.
The first back ups worked. However, on bothe machines I get the same error messgae: "sparsebundle is already in use".
Thoughts?babaapple wrote:
I have the same problem! Amazing, $299 for the TC, $20 for the upgrade and I cannot get backups!!! There is no solution?
Can anybody help?
Did you reboot the TC??
What about the whole network... turn everything off and reboot from modem.. router.. TC (might be one and the same).. clients...
Reboot not sleep the Mac.. it has to restart the network.
If you still have issues, give more info.. wireless or ethernet.. how the TC is connected.. bridged or router etc.
Is this a new setup or did you upgrade to ML and the whole thing went flop. If so reset TM.. see A4 in pondini troubleshooting.. ML or any upgrade install is a bad way to go.. !! -
Help !
The last few days my time capsule reports an error The backup disk image “/Volumes/Data-1/MacBook Pro.sparsebundle” is already in use.
To make things worse I seem to be loosing my screen so need to make a back up ASAPMake sure that no other Macs are backing up at the time.
Pull the power cord from the back of the Time Capsule
Count to ten
Plug the power cord back into the back of the Time Capsule
This will fix the issue about 98% of the time. If you are in the unlucky 2% category, please post back for more assistance -
My Macbook running Mountain Lion has not been able to back up for several weeks. The error box says that ".sparsebundle is already in use". what is this and how do I get past this?
Welcome to the Apple Support Communities
See > http://pondini.org/TM/C12.html -
The Green Light is on, on my time capsule and airport but it will not back up all i get is the following message below please help.
The backup disk image “/Volumes/Data/iMac-D49A20D0AE94.sparsebundle” is already in use.Welcome to Apple Support Communities
First, restart your iMac and your Time Capsule. In most of the cases, this should solve the problem.
If it doesn't work, read > http://pondini.org/TM/C12.html -
The backup disk image “/Volumes/ Time Cap iMac.sparsebundle” is already in use. What is a sparsebundle and how do I fix this?
Restart the Time Capsule as follows:
Pull the power cord from the back of the Time Capsule
Wait a minute
Plug the power cord back in to the back of the Time Capsule
This will fix this issue about 98% of the time. If you happen to be in the 2% category, there are more "fixes" here:
The Backup disk image ... sparsebundle ... is already in use. -
Please Help,
My Time Machine is not backing up and for 3 weeks I've ignored the popups but they happen so so often.
I really want to back up though, that is why I sold the Airport Extreme
Can anyone help
my error message always says:
The backup disk image “/Volumes/Time Capsule/Kyle’s MacBook Pro.sparsebundle” is already in use.
Thanks,
KyleMain53Reboot the Time Capsule..
Or reboot the whole network. This is just really poor networking on the part of Mountain Lion.
It has simply lost connection to the TC drive.
C12 http://pondini.org/TM/Troubleshooting.html
Read down through the list of issues.. this is popping up 20times a day.
Maybe you are looking for
-
Photoshop CC 2014 Crashes Randomly when using the Text Tool...
Since the most recent Photoshop update, CC 2014 has been extremely buggy and completely unstable on my Mac Pro, which is inexcusable from a paid service . The most common crash for me occurs when I try to use the "text tool" or attempt to edit text
-
Hey there guys. I was looking around the forums seeing if there was anything that someone posted simliar to my assignment. While there were SOME similar things, I think mines a bit more specific. Let me just state here that I don't want anyone to jus
-
Problem with onBlur="window.focus()"
Hi, inside the body tag of a popup widow i have used onBlur="window.focus()" and it is working fine i.e. when i tried to click on parent window the focus transfers back to popup window but i tried this by clicking like hundred times it fails i.e. the
-
Hi, I have finally got my MacBook set up with a DisplayPort and hooked up to an external monitor on the desk, Im using my old windows KB and Mouse for now to run it as a desktop. I have the MB on a small shelf on the desk in front of me and the exter
-
Screen size on YouView menu.
Hi Guys, Im wondering if anyone can help. I have the BT YouView Plus box (details at the bottom of this message). When I first got it, this problem was here. Then after a few weeks "something" happened, and it was fixed, then after a reset to factory