HT3275 The backup disk image "...Pro.sparsebundle" is already in use.
Please Help,
My Time Machine is not backing up and for 3 weeks I've ignored the popups but they happen so so often.
I really want to back up though, that is why I sold the Airport Extreme
Can anyone help
my error message always says:
The backup disk image “/Volumes/Time Capsule/Kyle’s MacBook Pro.sparsebundle” is already in use.
Thanks,
KyleMain53
Reboot the Time Capsule..
Or reboot the whole network. This is just really poor networking on the part of Mountain Lion.
It has simply lost connection to the TC drive.
C12 http://pondini.org/TM/Troubleshooting.html
Read down through the list of issues.. this is popping up 20times a day.
Similar Messages
-
TM Error: "The backup disk image "Name.sparsebundle" is already in use."
After resetting my TM I keep getting this error message for my MBP. Help!
Try removing and subsequently adding the Time Capsule disk in System Preferences > Time Machine.
If that does not work:
Open AirPort Utility - it is in your Utilites folder.
Select your Time Capsule, then the Disk tab
Deselect "Enable File Sharing" and click OK.
Quit AirPort Utility and allow the TC to reboot.
Open AirPort Utility again
Select "Enable File Sharing", click OK, and allow the TC to reboot. -
can't say much more than the above other than I can't access any previous backups and it won't backup the current information. Any solution would be appreciated. Thanks
The down and dirty solution......
Make sure that no other Macs are backing up at the time
Pull the power cord from the back of the Time Capsule
Count to ten
Plug the power cord back into the back of the Time Capsule
Wait a few minutes and try another backup.
A bit more elegant solution......
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the Time Capsule icon, then click Edit
Click the Base Station menu at the uppermost top of the screen where the Help, File, Window, etc menus appear
Click Restart
Wait a few minutes and try another backup -
I get an error message when running a back-up from my Macbook Pro: The backup disk image Macbook.sparsebundle could not be accessed (error-1) and the backup did not complete? What is the issue?
Try Here > http://pondini.org/TM/C12.html
More Info here > http://pondini.org/TM/Time_Capsule.html -
My time capsule hasn't been working for months now. Finally got around to looking into the problem. Have tried looking on forums -- most solutions point to Pondini.org. I've tried #17, which is related to my specific error with no avail (including using Airport Utility 5.6 to disconnect all users).
I have also tried moving (instead of deleting) my old sparsebundle into a temporary folder on the Time Capsule to "hide it" to attempt to create a new sparsebundle: while I have managed to get Time Machine to create a new one (albeit after many, many attempts), once it creates a new one, it doesn't seem to say that anything has been backed-up AND it cannot seem to access the "new" sparsebundle, giving me the error: "The backup disk image “XYZ.sparsebundle” could not be accessed (error -1)."
Thoughts?Try Here > http://pondini.org/TM/C12.html
More Info here > http://pondini.org/TM/Time_Capsule.html -
I can't use my time capsule(Time Mashine)... "Disk image Somthing.sparsebundle is already in use?"
Make sure that no other Macs are backing up at the time.
Pull the power cord from the back of the Time Capsule
Count to ten
Plug the power cord back into the back of the Time Capsule
Wait a few minutes and try a backup. Report on your results. -
My Time Machine has failed again with this message:
The backup disk image “/Volumes/Data/Shirley’s MacBook Pro.sparsebundle” is already in use.
How do I fix it?Pull the power cord from the back of the Time Capsule
Wait 60 seconds
Plug the power cord back in
This simple reset will fix this error 98% of the time. If you need more help, see this troubleshooting information:
The Backup disk image ... sparsebundle ... is already in use. -
What does this mean and How do I correct it? Kelly
It means that there are bugs in Lion and Mountain Lion.
Pull the power cord from the back of the Time Capsule
Count to 10
Plug the power cord back in to the back of the Time Capsule
This simple reset will fix the issue about 98% of the time. If you are in the 2% category, you will need more "fixes"
The Backup disk image ... sparsebundle ... is already in use. -
The backup disk image “/Volumes/Data-1/Joe Sykes’ Computer.sparsebundle” is already in use.
First, restart the Mac and the Time Capsule. In most of the cases, this will solve the problem.
If it doesn't work, see > http://pondini.org/TM/C12.html -
The backup disk image “/Volumes/Data/Connie’s iMac.sparsebundle” is already in use. Time Machine has stopped backing up. I deleted the selected disc and re-selected which one to use. Not sure what else to do.
Pull the power cord from the back of the Time Capsule
Count to 10
Plug the power cord back into the Time Capsule
Count to 45 to allow the Time Capusle to fully restart
Report on your results -
I have a time capsule that I use for my apple computers. My iMac has no problems but my Mac mini keeps getting this error for backups:
The backup disk image “/Volumes/Data/JIP’s Mac mini (2).sparsebundle” is already in use.
What do I do?Please shift the focus of your eyes to the right side of this page to find the heading of More Like This. There are multiple answers and solutions there.
-
I am unable to complete a backup and I get this message The backup disk image “/Volumes/Ana M. Hernandez, DO's Time/Ana M. Hernandez, DO.sparsebundle” could not be accessed (error -1). I have tried to find help but I can't find it in the apple site. I'm not very techy at troubleshooting and don;t want to dlo anything that will worsen the problem without advice. Thank you.
Reboot the Time Capsule.. Lion has terrible networking issues with the TC and has simply forgotten where it is.
Check C17 for some other issues.. there is some other things that cause it. And you can do a disconnect all users if you have the right utility.
http://pondini.org/TM/Troubleshooting.html -
The backup disk image “/Volumes/ Time Cap iMac.sparsebundle” is already in use. What is a sparsebundle and how do I fix this?
Restart the Time Capsule as follows:
Pull the power cord from the back of the Time Capsule
Wait a minute
Plug the power cord back in to the back of the Time Capsule
This will fix this issue about 98% of the time. If you happen to be in the 2% category, there are more "fixes" here:
The Backup disk image ... sparsebundle ... is already in use. -
So for days now, I am getting this message and it is resutling in no back ups. What does it mean it is in use and how can I fix it? Thanks now in advance for any help.
See this discussion...
https://discussions.apple.com/thread/4944252?tstart=0
Also see here if necessary...
The Backup disk image ... sparsebundle ... is already in use. -
This is the error message that comes up when my computer says that the time machine couldn't complete my backup. Does anyone know what this means?
Regards,
JbyrdksSee here...
The Backup disk image ... sparsebundle ... is already in use.
From Pondini’s excellent Information Here...
http://pondini.org/TM/Troubleshooting.htm
Maybe you are looking for
-
Brand new iPod Nano 4gb. Not responding after being charged for a while.
Hi guys. I got a replacement for my Nano today. It is brand new. The guy at the Apple Centre said to fully charge it before use, then fully discharge it. I've had the iPod plugged in for a fair while now, and it doesn't seem to be getting charged. Th
-
Web AS 640 Sneak preview Installation fails
Hello All, I recieve an Error while installing WAS 640. I downloaded the file WAS installer , Extracted it and as described started the sapinst.exe Installation starts but when it reaches Second step that is "SAP System Installation" it fails with
-
I'm having problems uploading my photos in iTouch. I know I have to use iTunes, but I don't even see any options to do that. Or a PHOTO category. Help?
-
I'd like to know if ADS requires a three tier landscape in both scenarios below - In case it is used for printing pdf only. - In case it is used for interactive design document. Also, I found that ADS is integrated with SAP PI 7.1. Is it fair to have
-
One renderer and two tables problem
Hi! Here is my problem. I got one table that use a CellRenderer, and it works very fine. I've added one other table on my interface, and I want it to use the same renderer, because it has to work like the first table. The problem is that the renderin