HT3275 The backup disk image "/Volumes/V's Back-up/Name's MacBook Pro.sparsebundle" is already in use.
This keeps happening. What have I done wrong and how do I fix this?
I have an older Macbook Pro that I am curently not using and 2 iPads that share the same Wi-Fi network if that makes any difference.
This is mountain lion in all its glory. Bug zoo inc.
See the post that was immediately next to yours.
https://discussions.apple.com/thread/4825784?tstart=0
Restart the TC.
Similar Messages
-
Just received this message after losing power for a couple of days. I checked a number of discussion sites but could not find an answer.
I have the same issue every week or so. I use the advice here to fix it.
-
Has anyone encountered this message on their time capsule/machine? Time Machine couldn't complete the backup because the backup disk image"/Volumes/Patti's Time Capsule/Patti's MacBook Pro.sparsebundle" is already in use"?
If you reboot the computer it should fix the problem. Also see the first link under More Like This to the right of this page:
I am received an error on my Time Capsule which states the backup disk image "Volumes/Data/MacBook Pro. sparse bundle? is already in use. so time machine couldn't complete the backup to time capsule - any suggestion -
The backup disk image “/Volumes/Patricia Walden's Time Ca/PATRICIA’s iMac.sparsebundle” is already in use. I get this when the time machine should be doing a back up.
Please shift the focus of your eyes over to the far right of this web page and locate the heading of More Like This.
Multiple answers and solutions are available there. -
The backup disk image “/Volumes/Richard Searson's Time Caps/Richard’s iMac.sparsebundle” is already in use. It hasnt backed up for over 24 hours now and I am concerned as only in May my whole system crashed and the time machine was not able to recover any data. I do not want this to happen again. Thanks
This is our most common problem.. and you are number 2 today.
Look on the right..
More Like This
Your problem is repeated with the solution ad nauseam.
But the solution is simple.. pull out the power cord from the TC.. count to 10.. Plug in the power cord again.
This is just poor networking from Apple.
Whenever you have TM issues.. this is the place to check.
http://pondini.org/TM/Troubleshooting.html
Your issue is C12. -
How do I get the time machine to work again. It's been dong this for 3 days, over and over again.
This is stock standard issue.. report 5-10 times a day here.
Solution is good old.. "Did you turn it off and on again??"
Unplug the TC.. count to 10.. plug the TC power back in again.
This fixes 98% of problems.. and shows the advancement in Mac OS and Apple firmware.. to be just like that other OS we love to hate.
If you cannot get satisfaction.. reboot the whole network.. never a bad idea.. Everything off and start in correct order. Modem.. wait 2min.. TC.. wait 2min.. Clients.
Tell us if you still have issues or read the master wizard of all things TM/TC
http://pondini.org/TM/Troubleshooting.html
C12 -
I keep receiving this message.
Time Machine could not complete the backup.
The backup disk image "/Volumes/Time Capsule/Karla Laura Smith's MacBookPro.sparsebundle" could not be accessed (error -1).
Can anyone help me clear this annoying message up? Thanks for advance....The unplugging was of power, if you were unplugging ethernet .. that will not do anything.
The issue is explained here.
C17 http://pondini.org/TM/Troubleshooting.html
If a restart of the TC is not adequate you maybe in the 2% that has other issues.. please try a full network restart in correct order.. with everything off.. modem.. then TC.. then clients.. with 2min gap to allow modem and TC to finish boot process. -
Time could not backup message said the back up disk image "/Volumes/Data-1/......iMac.sparsebundle" is already in use.( the ..... is my name on the message)
Can anyone please help me, with what to do?
Thanks SueOk.. read C12 and C17 is also relevant in Pondini troubleshooting.
http://pondini.org/TM/Troubleshooting.html
Try the above.
No luck then you should do
A1 .. Load the widget so you know what TM is doing.
A4 .. Reset of TM.
A5.. Verify the backup.
First thing.. though.. do a full network reboot..
Turn off everything.. restart the modem.. wait 2min.
Restart the TC.. wait 2min
Restart the computer. See if it now functions.
You might have to reset or do more severe stuff.. but try with that.
I am offline for 8 hours..
Pondini or one of the others here might be able to help further. -
My time machine won't back up....The message reads : The backup disc image"/volumes/(my name)'s time capsule/(my name)'s macbook pro. sparsebundle" is already in use........I'm not using anything else that I know of.....?.......Help!
ATXMacMan wrote:
I use OS X server for maintaing Time Machine backups for several macs
Ah, that's a new wrinkle to me. I haven't tested the Server product, but there are a number of differences. As far as I can tell, the firmware update solved this for most, but not all, users of standard OSX.
Are you still on Snow Leopard server? It's quite different from later versions, I understand.
Have you tried selecting the base station, then Base Station > Restart via Aiport Utility's menubar? That still disconnects everyone, but might work by itself.
Otherwise, sorry, but I'm out of my comfort zone.
Hopefully one of the networking gurus will have an idea or two. -
HT3275 The backup disk image "/Volumes/Data-1/Joe Sykes' Computer.sparsebundle" is already in use.
The backup disk image “/Volumes/Data-1/Joe Sykes’ Computer.sparsebundle” is already in use.
First, restart the Mac and the Time Capsule. In most of the cases, this will solve the problem.
If it doesn't work, see > http://pondini.org/TM/C12.html -
HT3275 The backup disk image "/Volumes/Data/iMac.sparsebundle" is already in use.
The backup disk image “/Volumes/Data/Connie’s iMac.sparsebundle” is already in use. Time Machine has stopped backing up. I deleted the selected disc and re-selected which one to use. Not sure what else to do.
Pull the power cord from the back of the Time Capsule
Count to 10
Plug the power cord back into the Time Capsule
Count to 45 to allow the Time Capusle to fully restart
Report on your results -
HT3275 The backup disk image "/Volumes/Data/JIP's Mac mini (2).sparsebundle" is already in use.
I have a time capsule that I use for my apple computers. My iMac has no problems but my Mac mini keeps getting this error for backups:
The backup disk image “/Volumes/Data/JIP’s Mac mini (2).sparsebundle” is already in use.
What do I do?Please shift the focus of your eyes to the right side of this page to find the heading of More Like This. There are multiple answers and solutions there.
-
I am unable to complete a backup and I get this message The backup disk image “/Volumes/Ana M. Hernandez, DO's Time/Ana M. Hernandez, DO.sparsebundle” could not be accessed (error -1). I have tried to find help but I can't find it in the apple site. I'm not very techy at troubleshooting and don;t want to dlo anything that will worsen the problem without advice. Thank you.
Reboot the Time Capsule.. Lion has terrible networking issues with the TC and has simply forgotten where it is.
Check C17 for some other issues.. there is some other things that cause it. And you can do a disconnect all users if you have the right utility.
http://pondini.org/TM/Troubleshooting.html -
The backup disk image “/Volumes/ Time Cap iMac.sparsebundle” is already in use. What is a sparsebundle and how do I fix this?
Restart the Time Capsule as follows:
Pull the power cord from the back of the Time Capsule
Wait a minute
Plug the power cord back in to the back of the Time Capsule
This will fix this issue about 98% of the time. If you happen to be in the 2% category, there are more "fixes" here:
The Backup disk image ... sparsebundle ... is already in use. -
HT3275 The backup disk image "/Volumes/Data/MacBook Pro.sparsebundle" is already in use.
My Time Machine has failed again with this message:
The backup disk image “/Volumes/Data/Shirley’s MacBook Pro.sparsebundle” is already in use.
How do I fix it?Pull the power cord from the back of the Time Capsule
Wait 60 seconds
Plug the power cord back in
This simple reset will fix this error 98% of the time. If you need more help, see this troubleshooting information:
The Backup disk image ... sparsebundle ... is already in use.
Maybe you are looking for
-
Loss transparency in an animated GIF image when resizing
Hi Friends, I have to write a program to resize GIF, JPEG , and PNG images. I wrote and it works but when i resize a GIF file it loses its transparency and give a black color for transparent area. I used a GifDecoder found at www.fmsware.com/stuff/Gi
-
HI, my file 2 Idoc scenario looks fine and the file sender adapter is working (shown in adapter monitoring). But there is no IDoc output. q1: Are there any possibilitiy to monitor this ? There are no messages in the message monitoring. q2: my file co
-
Hello! My mom wants to give me her old Power mac G4 (Quicksilver) desktop if I buy a monitor for it. I'm hoping to buy the matching monitor that pairs up with the system. The reason I want to buy the original monitor is to be safe and sure it wo
-
How to search in 2d array in different direction
the method will take a string argument and convert them into char and try to find them in a 2d array. It is more like a word puzzle(wordSearcher).Here's what i've done so far... public void find(String word) for(int a = 0; a < word.length(); a++) { c
-
How to import data from excel or csv files to Oracle table
hello everybody, I am new here and new in Oracle. I would like to know the steps how to import data from excel or csv files to Oracle table. Let say I already have table inside the Oracle. Then my user give me the sets of data inside the Excel Worksh