HT3275 Time capsule message reads: The backup disc image "/Volumes/(my name)'s Time capsule/(My name)'s macbook pro sparsebundle" is already in use.
My time machine won't back up....The message reads : The backup disc image"/volumes/(my name)'s time capsule/(my name)'s macbook pro. sparsebundle" is already in use........I'm not using anything else that I know of.....?.......Help!
ATXMacMan wrote:
I use OS X server for maintaing Time Machine backups for several macs
Ah, that's a new wrinkle to me. I haven't tested the Server product, but there are a number of differences. As far as I can tell, the firmware update solved this for most, but not all, users of standard OSX.
Are you still on Snow Leopard server? It's quite different from later versions, I understand.
Have you tried selecting the base station, then Base Station > Restart via Aiport Utility's menubar? That still disconnects everyone, but might work by itself.
Otherwise, sorry, but I'm out of my comfort zone.
Hopefully one of the networking gurus will have an idea or two.
Similar Messages
-
What do I do when I get this Time Machine error message?
"The backup disk image “/Volumes/Mark McConnell's Time Capsu/Mark’s MacBook Pro.sparsebundle” is already in use."Unplug your Time Capsule from power. Wait 10 seconds and then power it on again. When the light goes green try backing up again.
-
I just brought a New Macbook Pro and was successful in transfering data from my old macbook. However when I try to back up to my time capsule I receive this message. "The backup disk image “/Volumes/Salvatore Totino's Time Cap/Lorraine’s MacBook Pro.spars
You may need to reset TM and start with a fresh full backup.
For the particular error see
http://pondini.org/TM/Troubleshooting.html -
Hi folks - I didn't see my issue answered here, so I thought I would just toss it out there in case anyone had advice.
My error message is: The backup disk image “/Volumes/Data/Michael's MacBook Pro.sparsebundle” is already in use.
Thoughts?Look on the right hand side .. more like this.. I am surprised you can have missed it.. we get about 10 requests a day now to fix it.. especially since Mountain Lion has made it 10x worse.
C12 and C17
http://pondini.org/TM/Troubleshooting.html -
How do I get the time machine to work again. It's been dong this for 3 days, over and over again.
This is stock standard issue.. report 5-10 times a day here.
Solution is good old.. "Did you turn it off and on again??"
Unplug the TC.. count to 10.. plug the TC power back in again.
This fixes 98% of problems.. and shows the advancement in Mac OS and Apple firmware.. to be just like that other OS we love to hate.
If you cannot get satisfaction.. reboot the whole network.. never a bad idea.. Everything off and start in correct order. Modem.. wait 2min.. TC.. wait 2min.. Clients.
Tell us if you still have issues or read the master wizard of all things TM/TC
http://pondini.org/TM/Troubleshooting.html
C12 -
The Time Machine is not completing thte backup to my Time Capsule. I am receiving a message which reads "The backup disk image "/Volumes/Data/Mac Jet's iMAC.sparsebundle" is already in use." I cannot locate the source of the problem or what steps need to be taken to get the Time Capsule operating.
Hi, see if it shows here...
In Finder's Menu, select Go menu>Go to Folder, and go to "/volumes". (no quotes)
Volumes is where an alias to your hard drive ("/" at boot) is placed at startup, and where all the "mount points" for auxiliary drives are created for you to access them. This folder is normally hidden from view.
Drives with an extra 1 on the end have a side-effect of mounting a drive with the same name as the system already think exists. Try trashing the duplicates with a 1 or 2 if there are no real files in them, and reboot.
If it does contain data...
http://support.apple.com/kb/TS2474 -
What if my error message is the following: The backup disk image “/Volumes/********'s Time Capsul/****’s MacBook Pro.sparsebundle” is already in use. (I have redacted the name of the computer with asterixes)
This is a complex procedure.
Pull the power cord from the back of the Time Capsule
Wait a minute or two
Plug the power cord back in to the back of the Time Capsule
This will fix the issue 98% of the time. If you are in the unlucky 2% category, more help is here from Pondini, the Time Machine guru:
The Backup disk image ... sparsebundle ... is already in use. -
Has anyone encountered this message on their time capsule/machine? Time Machine couldn't complete the backup because the backup disk image"/Volumes/Patti's Time Capsule/Patti's MacBook Pro.sparsebundle" is already in use"?
If you reboot the computer it should fix the problem. Also see the first link under More Like This to the right of this page:
I am received an error on my Time Capsule which states the backup disk image "Volumes/Data/MacBook Pro. sparse bundle? is already in use. so time machine couldn't complete the backup to time capsule - any suggestion -
I get this error message when I try to back up my laptop:
' Time machine could not complete the backup. The backup disc image "/Volumes/Data/Lou Ann Buesing's Mac Book Pro. sparse bundle' is already in use. "
Anyone know how to fix it?Reboot the TC.. Sometimes you need to reboot the whole network.
This is what comes of Lion and then made worse in Mountain Lion of Apple not spending enough time to fix the bugs.
Read C12 in pondini.
http://pondini.org/TM/Troubleshooting.html
C17 can be related I think. -
My time machine does not back up and giving me this error message: The backup disk image “/Volumes/Data-1/Amiel’s MacBook Pro.sparsebundle” is already in use. Pls help.
Make sure that there are no other Macs backing up at the present time.
Pull the power cord from the back of the Time Capsule
Count to ten
Plug the power cord back in
This will "fix" things about 98% of the time. Post back if you are in the unlucky 2% category. -
I've received an error message Time Machine couldn't complete the backup to Time Capsule, the backup disk image /Volumes/Date/....MacBook Pro.sparsebundle" is already in use. Any suggestions as to what I can do to fix it?
I've got mine working again by deleting a partial backup that was on the Time Capsule.
I mounted the backup sparsebundle, and then browsed the content and found a filestucture named <timstamp>.inProgress. I removed that and the followed the tip to disconnect described above. That did the trick for me. -
When my time machine tries to backup to my time capsule I get the following message"The backup disk image “/Volumes/Data/Kent’s MacBook Pro.sparsebundle” is already in use. " What do I need to do to fix this?
Restart the Time Capsule.
-
The backup disk image “/Volumes/Time Capsule Disk/Earl Burroughs’s MacBook Pro.sparsebundle” is already in use. This is the message I get when it tries to back up, it had been working fine prior to this.....
The Backup disk image ... sparsebundle ... is already in use.
-
I,m getting this message, The backup disk image “/Volumes/terry bostock's Time Capsul/terry bostock’s iMac.sparsebundle” is already in use. What does this mean. I've upgraded to Mountain Lion, but it was ok till recently.
A constant bug in Mountain Lion.
Usually, simply powering off the Time Capsule, waiting a few minutes, and starting it back up will reset the network connection.
Give that a try first. -
My back ups are failing, the message I receive is "The backup disk image "/Volumes/Mamma and Pappa's Time Caps-1/Liz Giusti’s MacBook Pro.sparsebundle” is already in use. Any suggestions?
I am trying to back up my Macbook Pro to a time capsule attached to my iMac. When I first installed the Time Capsule, all backups went well.Reboot the TC.. it has got lost.. or reboot the whole network.. restart in correct order. .modem router.. TC.. clients.
It suddenly will reappear.. you might need to reboot it again in a few days. .such is apple software today.
Some more info C12. http://pondini.org/TM/Troubleshooting.html
Maybe you are looking for
-
How can I create a new ring tone for my iPhone 4?
How can I create a new ring tone for my iPhone 4? I followed the Garage Band process and ended up with the ring tone I want as a AAC audio file. It got stored in my iTunes a a song rather than a ring tone. How do I make it a ring tone vs. a song? I t
-
Windows xp printer sharing to Mac OS 10.6.7
Hello everyone? Im mac newbie. My small office network have 2 computer. 1 computer is a windows XP and another one is macbook. My network solution is wireless. I'm installing and configure canon mf4680 printer on my windows xp computer. Then sharing
-
Screen turning black on my Satellite C series
Hi all, my laptop is about 10 months old. Recently the screen appears to go off. What actually happens is it becomes so faint I can't see anything. I've connected it to an external monitor and there the screen displays, so I presume there's no proble
-
2.1 update: Improved accuracy of the 3G signal strength display
That said, 3G problem has not fixed. In many occasions, it jumps to edge or 2.5G when I am using safari. It goes back to 3G (looks full bar too) when I've done using it, provided I didn't moved around. Also, the safari crashes like hot cakes!!
-
When to use "my role" and "partner role" in BPEL?
I'm a bit confused when to set/use partner role and my role. Can anyone shed a little light, regards, Henrik