HT3291 Does this work when listening to radio direct on apple TV? I would like to able to play the radio on apple TV & airport express at the same time.

Does this work when listening to radio direct on apple TV? I would like to able to play the radio on apple TV & airport express at the same time.

Welcome to the Apple community.
No, this doesn't work directly from the Apple TV. However if you play the radio station from your computer you can send it via airplay to both devices, thereby achieving what you require.

Similar Messages

I recently tried uninstalling iTunes and then re-installing it so that I could get the iTunes Radio option. However, this did not work. I am not sure what to do in order to be able to play iTunes radio through my iTunes.

So I really would like to be able to use the itunes radio funciton. I tried re-installing itunes two times in hopes that it would somehow lead to me being able to use the itunes radio function. Since I am posting this on the community discussion, it is safe for you to assume that I was unable to get the function to appear on my itunes. If you could help me figure out this conundrum, I would be very happy with you.

Where are you? iTunes Radio is only enabled in the US so far.
tt2

I brought a iphone 4 today and it was locked to orange network my orange sim worked n it i could revieve an make call but today i went to a shop to get it unlocked and they told me it was blocked in the uk how does this happen when i already used it?

i brought a iphone and it worked perfectly i used it for like a year but i got a new sim so i had to get it unlocked but when i did they said the phone is blocked in the uk how does this work when i had already used it??help

I'm sorry but I don't have an answer for you... But I do have a couple of questions that may help others to help you! Was it necessary for you to get a new sim? I'm guessing yes or you would not have done that. You might want to try calling Orange and asking them to unlock it, they might ask you to connect it to your PC and use ITunes with it. Tunes will then say Congrats! Your IPhone Is UNLOCKED! I did this in the US with an OLD iPhone 3 first they asked me a serial number and other info and it worked like a charm. But the thing is Orange [or Apple] must be satisfied that the phone's contract obligations have been fulfilled. I know this is complicated and a pain in the butt, but if it's a dead phone now I would give it a shot. Oh BTW I believe here in the US it's no longer against the law to unlock a phone, apparently the law was changed, not sure about this though... Good luck!

Was told a USB device would create a PDF automatically from the data contained within when plugged into my USB port. Doesn't seem to work. How does this work and how can I fix the device I received?

Acrobat is not on the USB device - only Adobe Reader needed on the PC. How does this work? How can I fix this device if at all?

You need to ask the people who sold it to you. Doesn't sound like it has anything to do with Reader.
However, you should be wary of devices that automatically try to open files when plugged in. They can also infect your computers with all kinds of viruses or malware.

I own the 4s and my BT Planttronics Pro works fine with calls but does not work to listen to music? Any ideas on how to correct this?

I own the 4s and my BT Planttronics Pro works fine with calls but does not work to listen to music?
Any ideas on how to correct this?
Thanks-Vitaleyes

I don't know what they call it, but my plantronics voyager pro, and my wifes plantronics voyager pro+ will not let you hear music through the headset. My Blueant T1 does support it and plays the music through the deadset.

Touch ID in my iPhone six does not work when it's plugged into the wall is anybody else having this problem?

i've noticed a touch ID only works with my iPhone six is not plugged into the wall was soon as I plug it in it doesn't work anymore doesn't even register fingerprint.

Charger60 wrote:
i
Touch ID in my iPhone six does not work when it's plugged into the wall is anybody else having this problem?
No. You are the only one. The way I know is that I don't have the problem, therefore no one else can have it.
Seriously, no matter what problem you have, with a half billion iPhones in use, someone else will have the same or similar problem. So knowing that doesn't help solve it in the slightest. As it's new and still in warranty I would take it to an Apple store. Make a genius bar appointment first so you won't have a long wait.

Iphone 4 the mike does not work when making a call. it does work with speaker phone and face time

Just activated new Iphone 4 and the mike does not work when making a call. it does work with speaker phone and face time. Any known fixes?

My wife's iphone 4 also has your same no ring problem as does my iphone 5 just less often. I called her iphone 4 at home from where I work 20 miles away on my iphone 5. With her phone in 3G mode ONE call went through and 9 went to voice mail in 10 tries. This is a 10% sucess rate!! I also could listen in real time from the wired work phone and the wired home phone. She turned off 3G mode and it went to "O" mode at the top left of the screen after the ATT. In this mode it rang on the first ring tone 5 times out of 5 tries which is 100% of the time. I have learned that the calling party will hear up to 4 ring tones when placing a call on the ATT network. If the ring tone changes volume slightly before the 4th ring then and only then will the cell phone start to ring. If the ring tone does not change after the 4th ring you get voice mail. If the calling party does not leave a voice message there is never a missed call displayed on the iphone. If the calling party does leave a voice message a few minutes later the iphone dings for arriving voice mail but still no missed call indication.
This appears to be related to the time of day and the ATT tower that the receiving caller is using. Tried other towers and it works in 3G mode 10 times out of 10 tries. Apple replaced the first iphone 4 with a new phone, no improvement. ATT replaced the SIM card and no improvement. ATT so far is clue less. This has been going on every since we got the new iphones which is 4 months. The ATT web site also describes this same problem from several years ago. Has anyone got better information?
Thanks

I got a itunes gift card and when i try and buy some thing it asks me for my credit card details how does that work when i have £15 on my fone that i got on a gift card?

i got a itunes gift card and when i try and buy some thing it asks me for my credit card details how does that work when i have £15 on my fone that i got on a gift card? as i am trying to buy a song and it is starting to really cheese me of now where it keeps asking for credit card details is there a way round it with out having to use a credit card?

Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

No access with SP Designer 2010 after change to FBA and Windows at the same time - Does this work with SP 2013

Hi All,
It seems you can't use SharePoint Designer 2010 to open a site if you have both forms and Windows Auth selected.
Is there any way around this if i want to use the 2 at the same time?
How does this work with SharePoint 2013 as i would be doing some migrations?
Cheers in Advance

Hi,
As I understand, you encountered the issue after you selected both FBA and Windows Authentication at the same time.
As I test, I can open the SharePoint 2010 site using FBA and Windows Authentication by SharePoint designer 2010. When you open the site first,
you will get a dropdown menu where you can choose between the 2 authentication mechanisms.
After you choose one of them, you can open the site.
https://onedrive.live.com/redir?resid=40B702A9FB117DD!136&authkey=!ABtMg5n3OtPakCg&v=3&ithint=photo%2cPNG
When I open the SharePoint 2013 site using FBA and Windows Authentication by SharePoint designer 2013, I also get
a dropdown menu where I can choose between the 2 authentication mechanisms. I can open the site after I choose one of them.
So I think there are some other reasons to cause the issue.
Check these things below:
1. Check if you have the permission to open the site in SharePoint designer (Site Permission > Permission Level in ribbon > Click the permission you belongs to > Ensure Use Remote Interfaces is selected).
2. Check if you have enabled the SharePoint designer to open the SharePoint site. (Select the web application hosting the site collection using the FBA and windows authentication >Central Administration website > General Application
Settings > SharePoint Designer > ensure Enable SharePoint Designer
is selected).
3. Is there any error when you open the site in SharePoint Designer? If there are any errors, could you please provide it here for further research?
More references:
https://social.technet.microsoft.com/Forums/sharepoint/en-US/2a3c022c-f924-4b38-be02-5c5ac7a2927e/cannot-open-sharepoint-site-using-sharepoint-designer-2010-get-a-popup-with-4-possible-causes?forum=sharepointgeneralprevious
https://social.msdn.microsoft.com/Forums/office/en-US/19628c53-fde2-44b0-806c-64f67263c931/cant-open-sharepoint-site-with-sharepoint-designer-2010?forum=sharepointcustomizationprevious
Best regards
Sara Fan
TechNet Community Support

Reply to all using ItemReply does not work when specifying messageid

Hello everyone,
I am trying to use the ItemReply token to perform a "Reply to All"
action on a mail item with a known message identifier and include the
original message text in the response. According to the documentation,
the call should be:
ItemReply(7;1;"message-id")
Still, when I execute this token, apparently only a normal reply action
is performed because only the original sender is listed as recipient.
(The message text is properly included)
However, when I manually select the message in the GroupWise client
first and then execute the same call without specifying the message id,
all recipients of the original mail are listed in "To:" as expected:
ItemReply(7;1)
Could it be that the "ReplyTo" parameter is ignored or does not work
when a message id is specified as parameter? (Setting "IncludeText" to 0
does not change anything)
Thanks in advance and best regards,
Peter Hofer

Worth bumping this message. I find the exact same behaviour as mentioned 5 years ago. Using both GW8 and GW2012.
According documentation, when MessageId is not specified it defaults to the command ItemReplyOpenItem(). I assume that the reason "Reply To all" works without a MessageID is because of that. Someone needs to give a look to ItemReply().

HTMLResources, does this work in the adobe content viewer on the iPad

HTMLResources, does this work in the adobe content viewer. I have created my HTMLResources folder with the pdf and zipped it. It how ever does not download anything when I press the button in the content viewer.

Hi Bob, I just did my test again. What I didn't do in the first place was zip the contents, not the folder. It worked, thank you very much. My next question is can these pdfs be saved into ibooks? Can we download content such as forms that can be filled in and then eamiled back via the ipad mail program?

Dbx does not work when debugging g++ exes.

Hi,
We are just getting started building our application on redhat el5 with sunstudio 12.
We are compiling and linking our app with gcc 4.1 as we need to be able to link against some 3rd party libraries build on rhel4 that we do not have source for.
We now can compile and link fine but dbx does not work when it is fed the executable.
We get the error
dbx: warning: Bad transition in runtime linker interface. CONSISTENT->CONSISTENT[
and dbx freezes.
Note : This is built with -m32 on a 64bit kernel. Also we have not yet rebuilt all the opensource libs used on gcc 4.1 as we have a large number of them.
Any ideas ?
The complete output of running dbx :
Output from dbx :
debug /ps_rels/Dev/linux_rhel5/exe/sx
Reading sx
Reading ld-linux.so.2
Reading libz.so.1
Reading libxerces-c.so.27
Reading libxalan-c.so.110
Reading libxalanMsg.so.110
Reading libsde.so
Reading libsg.so
Reading libpe.so
Reading libsqlite.so.0
Reading libsqlite3.so.0
Reading libgeos.so.2
Reading libpng12.so.0
Reading libX11.so.6
Reading libXm.so.4
Reading libXt.so.6
Reading libXi.so.6
Reading libXext.so.6
Reading libXrender.so.1
Reading libfreetype.so.6
Reading libexpat.so.0
Reading libfontconfig.so.1
Reading libcairo.so.2
Reading libglib-2.0.so.0
Reading libgmodule-2.0.so.0
Reading libgobject-2.0.so.0
Reading libgthread-2.0.so.0
Reading libpango-1.0.so.0
Reading libpangocairo-1.0.so.0
Reading libpangoft2-1.0.so.0
Reading libatk-1.0.so.0
Reading libgtk-x11-2.0.so.0
Reading libgdk-x11-2.0.so.0
Reading libgdk_pixbuf-2.0.so.0
Reading libtiff.so.3
Reading librt.so.1
Reading libwx_gtk2_xrc-2.8.so.0
Reading libwx_gtk2_qa-2.8.so.0
Reading libwx_gtk2_html-2.8.so.0
Reading libwx_gtk2_adv-2.8.so.0
Reading libwx_gtk2_core-2.8.so.0
Reading libwx_base_xml-2.8.so.0
Reading libwx_base_net-2.8.so.0
Reading libwx_base-2.8.so.0
Reading libboost_thread-gcc-mt-1_33_1.so.1.33.1
Reading libboost_filesystem-gcc-mt-1_33_1.so.1.33.1
Reading libncurses.so.5
Reading libnsl.so.1
Reading libdl.so.2
Reading libACE.so.5.5.1
Reading libpthread.so.0
Reading libpam.so.0
Reading libm.so.6
Reading libc.so.6
Reading libstdc++.so.6
Reading libgcc_s.so.1
Reading libicuuc.so.34
Reading libicui18n.so.34
Reading libstdc++.so.5
Reading libXau.so.6
Reading libXdmcp.so.6
Reading libXmu.so.6
Reading libXp.so.6
Reading libXft.so.2
Reading libjpeg.so.62
Reading libSM.so.6
Reading libICE.so.6
Reading libexpat.so.1
Reading libXfixes.so.3
Reading libXrandr.so.2
Reading libXinerama.so.1
Reading libXcursor.so.1
Reading libXxf86vm.so.1
Reading libaudit.so.0
Reading libicudata.so.34
Reading libnss_files.so.2
Reading libnss_dns.so.2
Reading libresolv.so.2
dbx: warning: Bad transition in runtime linker interface. CONSISTENT->CONSISTENT
Reading libnss_ldap.so.2
Reading libcom_err.so.2

Well, this message is just a warning and should not prevent dbx from working. What exactly happens to dbx? Does it hang? Does it crash? Or it doesn't allow to run the app?
A side note: this message says that runtime linker debugging interface reported "consistent" event w/o any "add" or "delete" events, which is at least redundant and may indicate a bug. It is possible though that the bug is in dbx as well as in ld-linux.so, but its impossible to tell without live test case.

The dropdown list in the address bar does not work when clicked

In the address bar the dropdown list icon does not work when clicked. I have tried resetting everything in safemode and it still doesn't work. When I click on the icon it just highlights the entire address line.

This can be a problem with the file places.sqlite that stores the bookmarks and the history.
* http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
Also check the setting in:<br />
[http://kb.mozillazine.org/Menu_differences Firefox > Preferences] > Privacy > Location Bar: When using the location bar, suggest: History, Bookmarks, History and Bookmarks

Css3 animation does not work when triggerd by backing bean method

Hi,
I use Jdev 11.1.1.4 (but I guess the Jdev/ADF version does not matter in this case) and Firefox 15.0.1.
I tested some parts of article https://blogs.oracle.com/groundside/entry/css_animations_the_panel_flip from Duncan Mills.
The CSS3 animation for styleClass "rotateOut" works fine when I trigger it from mouse hover.
The problem is that the animation does not work when I set the styleclass in a backing bean.
In this case the UI component to rotate (in my case the calender component) changes immediatelly to the transition target without the transition-duration of 2 seconds and therefor there is no animation effect visible for the user.
Here the backing bean code:
    public void doRotate() {
       afCalender.setStyleClass("rotateOut");
       AdfFacesContext.getCurrentInstance().addPartialTarget(getAfCalender());
    }Here the skin:
.rotateOut {
    -moz-transition-property: -moz-transform;
    -moz-transition-delay: 2s;
    -moz-transform: rotateY(45deg);
    -moz-transition-timing-function: ease-in-out;
    -moz-transition-duration: 2s;
.rotateReturn {
    -moz-transition-property: -moz-transform;
    -moz-transform: rotateY(0deg);
    -moz-transition-timing-function: ease-in-out;
    -moz-transition-duration: 2s;
}In Duncan's article java script is used to change the style class.
Does the CSS3 animation only work when java script is used to change the style class or shoud java in a backing bean also work?
Any hints?
regards
Peter

I have tested several other settings but no success.
Any ideas?
regards
Peter

Can two bluetooth headsets access the ipad at the same time, for example, to watch a movie together on an airplane trip? does bluetooth work when the ipad is in airplane mode?

can two bluetooth headsets access the ipad at the same time, for example, to watch a movie together on an airplane trip? does bluetooth work when the ipad is in airplane mode?

This article: http://www.iphonefaq.org/archives/97903 helped to clear up confusion I had re your point
when Airplane mode is on you can turn on either or both wifi and bluetooth
It makes it clear that airplane mode turns off processes involving cellular networks, which doubtless involve rather strong transmissions, while allowing others such as wi-fi and Bluetooth. I'm puzzled though why the iPod rather than the iPhone has the airplaine mode when it has no cellular capacity. Perhaps it's there but doesn't actually do anything other than making it possible to conform to a request to switch into airplane mode, and display an airplane icon to satisfy flight attendants who are checkng up on you!

HT3291 Does this work when listening to radio direct on apple TV? I would like to able to play the radio on apple TV & airport express at the same time.

Similar Messages

Maybe you are looking for