HT3310 how do i get my headphone to work with the iphone?

how do i get my headphone to work with the iphone? Are there some settings
that I need to turn on so I can use my headphone while talking on the phone?

Are you using the earbuds that came with the iPhone? If you are using other earphones, it's possible that they need an adaptor to work with the iPhone's recessed headphone jack.

Similar Messages

How do I get Photos - iPhotos to work with my iPhone

I have a 2 month old Mac Mini, and noticed a system upgrade available 10.10.3 - I always download all that are offered. 10.10.3 loaded, and I proceeded to open iTunes and iPhoto and plug in my iPhone, All went well until I noticed PHOTOS I opened it to see what it was and was asked to selected a library as it seemed the only option on offer I did and found a mass of over 3500 photos in folders that I did not totally recognise, including one of Face photos. It was only then that I noticed a NO ENTRY SIGN on iPhotos. Thanks to some Mac Forum advice I have now been able to install a new iPhotos 9.6.1 to replace this but I now have a big problem that I cannot edit the photos on my iPad or iPhone.
I have 10.10.3 installed with iPhoto-9.6.1 - PHOTOS-1 - iTunes-12.1.2.27 & iOS-8.3 on the iPhone & iPad.
I Plug the iPhone into the Mac, iTunes can see it, click the camera icon I see a list of 30+ folders - 2 are ticked which are MC, it has 19 photos in it and PP, it has 1 photo in it - which is correct for the iPhone.
In PHOTOS when I plug in the iPhone, a new command appears in the top bar ‘IMPORT’ click on that and the iPhone icon shows on the left side with a box to tick - ‘open this device’ - click it and the message is ‘NO PHOTOS’. Under Albums I find the same 30+ listed with MC containing 50 photos & PP with 33.
In iPhoto I plug in the iPhone & it is recognised with a message on the right , LOADING… and there it stays STUCK but not crashed. Down the left side is listed the same 30+ albums, MC with 50 photos & PP with 33.
Question - how do I get Photos/iPhoto/iTunes/to communicate with my iPhone/iPad, to update the photo albums as they did before 10.10.3 & Photos were introduced to my system???? Your help please

Thanks for your help III
BUT: I really don't get it! About ten days ago or so my iPhone 4s was suddenly able to hold on to the AirPort Express network.
But then yesterday all of a sudden the problem was back again!!! I didn't do ANYTHING! It was just back out of nowhere!
Wi-Fi connection on my iPhone came on... and off... and on... and so on, while my MacBook was working perfectly fine with the network!
So I reset the whole thing again on my MacBook with the AirPort utility, I reset the AirPort Express and I reset my iPhone... still not working... Honestly this freaks me out. Especially because it worked for more than a week and as I said I did not change a thing!!!
Does anyone have any ideas how to solve the problem other then reset everything? Or is there an explanation around for this occurence???
Thanks for your Help!

How do I get AirPort Express to work with my iPhone 4s?

Hey there,
I installed AirPort Express yesterday to make a wifi network out of the ethernet access that I have. It worked perfectly fine with my MacBook but my iPhone 4s does not seem to be able to hold on to the network! I can connect to the network and the wifi sign appears on the iPhone screen but after about 10 seconds it disappears again... and then it comes on again... and disappears again...
Does anyone have the same problem? What can I do to resolve this?
Thank you a lot for your answers in advance!

Thanks for your help III
BUT: I really don't get it! About ten days ago or so my iPhone 4s was suddenly able to hold on to the AirPort Express network.
But then yesterday all of a sudden the problem was back again!!! I didn't do ANYTHING! It was just back out of nowhere!
Wi-Fi connection on my iPhone came on... and off... and on... and so on, while my MacBook was working perfectly fine with the network!
So I reset the whole thing again on my MacBook with the AirPort utility, I reset the AirPort Express and I reset my iPhone... still not working... Honestly this freaks me out. Especially because it worked for more than a week and as I said I did not change a thing!!!
Does anyone have any ideas how to solve the problem other then reset everything? Or is there an explanation around for this occurence???
Thanks for your Help!

HT204490 How do I get Photos - iPhotos to work with my iPhone

I went to my computer to download some photos on my iPhone and noticed an update available 10.10.3 - I always download all that are offered. 10.10.3 loaded, and I proceeded to open iTines and iPhoto and plug in my iPhone, All went well until I noticed PHOTOS I opened it to see what it was and was asked to selected a library as it seemed the only option on offer I did and found a mass of over 3500 photos in folders that I did not totally recognise, including one of Face photos. It was only THEN that I noticed a NO ENTRY SIGN on iPhotos. Thanks to some Mac Forum advice I have now been able to install a new iPhotos 9.6.1 to replace this but I now have a big problem that I cannot edit the photos on my iPad or iPhone.
I have 10.10.3 installed on a 2 month old Mac Mini, with iPhoto-9.6.1 - PHOTOS-1 - iTunes-12.1.2.27 & iOS-8.3 on the iPhone & iPad.
I Plug the iPhone into the Mac, iTunes can see it, click the camera icon I have a list of 30+ folders - 2 are ticked which are MC, it has 19 photos in it and PP, it has 1 photo in it - which is correct for the iPhone.
In PHOTOS when I plug in the iPhone, a new command appears in the top bar ‘IMPORT’ click on that and the iPhone icon shows on the left side with a box to tick - ‘open this device’ - click it and the message is ‘NO PHOTOS’. Under Albums I find the same 30+ listed with MC containing 50 photos & PP with 33.
In iPhoto I plug in the iPhone & it is recognised with a message on the right , LOADING… and there it stays STUCK but not crashed. Down the left side is listed the same 30+ albums, MC with 50 photos & PP with 33.
Question - how do I now get Photos/iPhoto/iTunes/to communicate with my iPhone/iPad, to update the photo albums as they did before 10.10.3 & PHOTOS, were introduced up the complete system???? Your help please

Thanks for your help III
BUT: I really don't get it! About ten days ago or so my iPhone 4s was suddenly able to hold on to the AirPort Express network.
But then yesterday all of a sudden the problem was back again!!! I didn't do ANYTHING! It was just back out of nowhere!
Wi-Fi connection on my iPhone came on... and off... and on... and so on, while my MacBook was working perfectly fine with the network!
So I reset the whole thing again on my MacBook with the AirPort utility, I reset the AirPort Express and I reset my iPhone... still not working... Honestly this freaks me out. Especially because it worked for more than a week and as I said I did not change a thing!!!
Does anyone have any ideas how to solve the problem other then reset everything? Or is there an explanation around for this occurence???
Thanks for your Help!

How do I get my Imessages to work with another iphone again after it has stopped working?

My iphone use to always send imessages with my boyfriend's iphone now it will only send SMS texts, how do I get it back to sending Imessages with iphone?

You should of course make sure that they're both running the latest version of iOS (at least iOS5 is required) - connect to your computer and update from iTunes, if not.
Matt

How do I get my printer to work with my iPhone/ipad wirelessly

how do I get my printer epson workforce 610 wirless to work from my iphone/ipad? I downloaded the epson printer app.

Maryannebrabander,
Your comment " ... It was printing great until I did this upgrade." brought to mind a thought:
If you're ever in the SIlicon Valley area of California, specifically Mountain View, CA, I strongly recommend a visit to the Computer History Museum there. This page from the Museum website shows a Calcomp plotter advertisement from 1969:
http://www.computerhistory.org/revolution/mainframe-computers/7/161/689
My question to you is should the iPhone be able to print to the Calcomp plotter? If not, exactly how old would you have a printer (or plotter) be before you dropped support for it? If you ever do drop support, then that would occur at some discrete time - one day it would work, then something would be updated and it would no longer work.

How to configure Cisco ASA 5500 to work with the iPhone

We have Cisco ASA 5510 (latest firmware version), and apparently, according to Cisco website it is compatible with new iPhone 3G's IPSec client:
http://www.cisco.com/en/US/docs/security/vpnclient/cisco_vpnclient/iPhone/2.0/connectivity/guide/iphone.html
We've setup our first iPhone properly. It connects fine to the network, shows VPN connection as active. Gets a private IP address. But does not let any traffic go to the internal network. We thought it might be DNS problem, but it cannot connect to Exchange server even when using IP address instead of DNS. No luck either.
After checking ASA logs, we found that iPhone goes through Phase 1 authentication correctly. But then gives some kind of error, mentioning "Attribute 5".
Has anybody been successful configuring ASA5500 series (in particular 5510) to be used with iPhone?
I noticed that many people are having these problems.
Please do not post to this topic if you have ANY OTHER Cisco device.
Cisco specifies that iPhone is compatible only with Cisco ASA 5500 Security Appliances and PIX Firewalls. Neither Cisco IOS VPN routers nor the VPN 3000 Series Concentrators support the iPhone VPN capabilities.
Let's keep this topic only for users of ASA 5500 series and PIX Firewalls.
It would be extremely helpful for a large number of users if somebody posted a list of settings for ASA5500 or PIX firewall that DO work with iPhone 2.0
Thank you!
Oleg R

We found the solution and a bug in Cisco firmware (seems to be a bug).
First of all, thanks to our Chief Systems Architect Seb, here is a config that worked for us on a Cisco 5520 (latest firmware).
access-list iphone_splitTunnelAcl standard permit <insert ip> <insert mask>
access-list iphone_splitTunnelAcl standard permit <insert ip> <insert mask>
crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec transform-set iphone esp-3des esp-sha-hmac
crypto ipsec transform-set iphone mode transport
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto dynamic-map SYSTEMDEFAULT_CRYPTOMAP 65535 set pfs
crypto dynamic-map SYSTEMDEFAULT_CRYPTOMAP 65535 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5 iphone
crypto map outside_map 10 match address vpn
crypto map outside_map 10 set transform-set ESP-AES-256-SHA
crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEMDEFAULT_CRYPTOMAP
crypto map outside_map interface outside
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
crypto isakmp policy 20
authentication pre-share
encryption aes-256
hash sha
group 5
lifetime 86400
crypto isakmp nat-traversal 20
group-policy iphone internal
group-policy iphone attributes
wins-server value <insert ip> <insert ip>
dns-server value <insert ip> <insert ip>
vpn-tunnel-protocol IPSec
ipsec-udp enable
ipsec-udp-port 10000
split-tunnel-policy tunnelspecified
split-tunnel-network-list value iphone_splitTunnelAcl
default-domain value <insert domain name>
tunnel-group iphone type remote-access
tunnel-group iphone general-attributes
address-pool VPN-Pool
authentication-server-group ActiveDirectory2
default-group-policy iphone
tunnel-group iphone ipsec-attributes
pre-shared-key <insert pre-shared key>
For iPhone you have to be using IPSec tab for configuration.
We tried to set up this config using the wizards, but it would not work.
Later it turned out that wizards by default set this setting:
"crypto isakmp nat-traversal 20"
equal to zero and there is no way to change it from the GUI.
Only after we changed it (increased the value from 0 to 20) through the command line the connection started working perfectly.
Please let me know how it works out for you.
Message was edited by: Rogik
Message was edited by: Rogik

I have an Retina display MacBook Pro with HMDI out port. I also have an HDMI to Component cable with Audio Plugs. How can I get HDMI out to work with this cable when plugged into the Component and Audio ports on my TV?

I have an Retina display MacBook Pro with HMDI out port. I also have an HDMI to Component cable with Audio Plugs. How can I get HDMI out to work with this cable when plugged into the MacBook Pro and connected to the TVs Component and Audio in ports.

Will not work. To my knowledge, dual converting like that isn't supported. The Mac must detect the connected video output device and that sort of info cannot be done across an analog component uni-directional connection.

I have a long-existing iPhone 4s with one apple id and started a job where I received a macbook with another apple id. how do i get my phone to sync with the Mac Pro and secondly how do i get my music on there?

i have a long-existing iPhone 4s with one apple id and started a job where I received a macbook with another apple id. how do i get my phone to sync with the Mac Pro and secondly how do i get my music on there?

No not bothered about sycing apps etc it is all about calendars and maybe notes. IN terms of how its done I just want it the easiest way and preferably so that if an entry is made on one calendar then it populates the other.
Thgius is beacuse I have my work diary on outlok, which I then link with my ical. I want to make sure that information is then shared with her.
Chris

How do I get iTunes 11 to work as the old iTunes did in this respect: after playing a song in one playlist, I click on another playlist, highlight a song, press play, and get the result of that song playing & that playlist continuing?

How do I get iTunes 11 to work as the old iTunes did in this respect: after playing a song in one playlist, I click on another playlist, highlight a song, press play, and get the result of that song playing & that playlist continuing? As it goes now, one clicks on the song in the new playlist where the arrow is and then chooses 'Play Song Next.' So, it plays next, but then the song after that is back in the old playlist. I want to use iTunes smoothly without the extra clicks I've had to do in order to get the playlist to continue. This is music for background while I play the violin at restaurants, and extra clicks and hassle is quite unappreciated, especailly since it worked fine in the previous iTunes.
Thanks.

At the top of the playlist where it shows the playlist title and the number of songs, there are two icons. Click the "play" triangle to add the entire playlist to "Up Next", or the "shuffle" symbol to do the same thing but in random order. But the currently playing track will stop playing, and all the songs in "Up Next" will be removed (replaced by the ones from this playlist).
If you hold down the "option" key while clicking those icons, the currently playing song will continue playing, and the new playlist will be added to "Up Next" (above the songs that were already there).

How do I get Front Row to work with Lion?

Hello fellow Mac users,
How do I get Front Row to work with Lion? I have an iMac 27 inch computer and is the sole entertainment provider for my bedroom. I refuse to put a TV in my room and wanted to know how to get Front Row to work again on my mac? It seems that the upgrade to Lion erased the app.
I have quite a few movies and series that I bought off iTunes and is a shame that I can't use a media center app like Front Row on Lion.

I kind of have the opposite problem. I need to know how to turn off my remote on the computer. I am using the remote for my Apple TV and it keeps making the volume on my Computer go up and down (with annoying sounds).
There used to be a way to un-sync the remote with the comp but I cannot remember how and the Apple help is not much help! I have Lion.
Thanks!
Best,
Tony

How do I get my AppleID to work with iCloud?

How do I get my AppleID to work with iCloud? It says that I have a valid ID, but that I can't use it with iCloud...
How do I fix this?
Thanks!!

Firstly, you need to change your details with Apple, Start here, change your country if necessary and go to manage your account.
In order to change your Apple ID or password for your iCloud account on your iOS device, you need to delete the account from your iOS device first, then add it back using your updated details. (Settings > iCloud, scroll down and hit "Delete Account")
Providing you are simply updating your existing details and not changing to another account, when you delete your account, all the data that is synced with iCloud will also be deleted from the device (but not from iCloud), but will be synced back to your device when you login again.
In order to change your Apple ID or password for your iCloud account on your computer, you need to sign out of the account from your computer first, then sign back in using your updated details. (System Preferences > iCloud, click the sign out button)
In order to change your Apple ID or password for your iTunes account on your iOS device, you need to sign out from your iOS device first, then sign back in using your updated details. (Settings > iTunes & App store, scroll down and tap your ID)
If you are using iMessages or FaceTime, you will also need to log out and into your ID there too.

How do i get my sim to work with this phone?

I just bought a used iphone, when i put my sim card in, it says it is lock. I have done this before and been able to use instantly, but this time it wont come on. HOw do i get my sim to work with this phone?

If your iPhone was unlocked and has relocked after an update to iOS, then the iPhone was hacked to unlock it and has now been locked back to the original carrier. You'll need to contact the carrier to whom the iPhone is locked and request unlocking. They may refuse to do so since you're not the person with whom they had the contract.
Regards.

Hardware missing -AGP Graphics card. How can I get my FCE 4 working on the new computer? Cheers

Hi I have just upgraded my computer to Mac OSX 10.6.7 now I cant open my FCE 4. Message reads, Hardware missing -AGP Graphics card. How can I get my FCE 4 working on the new computer? Cheers

Thanks, just so I know we are talking about the same items please let me know - When you say "run Prokit" do you mean downloaded? Which I did. I dont have Prokit 4.0.1 if you are referring to that, do I need this first? Please explain what application name I am looking for if other than Prokit which is sitting in my "download folder" do I need to manually put it into the apps folder? Sorry if the questions are layman but this area is not a very strong point for me. Thanks for your help so far.

Since update of my MAC my Notes no longer appear on my Mac but are still available through iCloud on my iPhone and iPad. How do I get my MAC to sync with the other devices as e'thing else has synced on my MAC through iCloud.

Since update of my Mac Book Pro my previously drafted Notes no longer appear on my Mac but are still available through iCloud on my iPhone and iPad. How do I get my Mac to sync with the other devices as e'thing else has synced on my MAC through iCloud. Also since the update Notes no longer appear as a folder in "Mail" but are now a distinct programme-is there any way of returning Notes to the Mail programme?

Thanks, but I've been on the phone with AppleCare US (where I am and live) and AppleCare UK. They continue bouncing me back and forth without helping resolve the problem.
Perhaps someones knows how to further escalate the issue at Apple?

HT3310 how do i get my headphone to work with the iphone?

Similar Messages

Maybe you are looking for