HT3382 DVI to VGA adaptor with Apple Mini

I have a slightly older Apple mini and would like to connect it to my TV, which only has a VGA port. Which adapter should I use? The "Apple DVI to VGA adaptor"?

DVI

Similar Messages

Using DVI to VGA adaptor with HDMI to DVI port on Mac Mini Server

Hi - I couldnt find anything on this, so I decided to post a new topic. We just recently purchased a Mac Mini server at work for iOS development. Before we launch in in one of our data centers and start remoting into the system, we need to conduct basic setup on the system.
For this, we pulled out an old stock VGA montior we have around the office, and found an apple DVI to VGA adaptor (http://i51.tinypic.com/2mzb4lc.jpg)
The problem is, the pins dont exactly line up... on the DVI to VGA adaptor there are 2 extra pins above and below the horzontial pin on the left hand side (http://i52.tinypic.com/2mxhg1j.jpg) that do no exist on the Mac Mini HDMI to DVI adaptor (http://i53.tinypic.com/2ywesrp.jpg).
Ive checked other converters and it seems that all of them are setup the same way, with two pins above and below.
Has anyone else had to deal with this issue? I really dont want to go and buy the Mini DisplayPort to VGA adaptor for one-time use.
Thank you!

Welcome to  Discussions!
What you are seeing is the difference between an analog and digital DVI connector, as DVI as a specification can provide both types of signal, depending on implementation. When used in a mode where only one or the other type of signal is provided, the different connectors prevent a mismatch. VGA being analog, the DVI to VGA adapter is using an analog DVI connector. The other connector you are dealing with is a digital only connector. HDMI is digital only, hence the HDMI to DVI adapter being digital only. Thus you can not adapt from the HDMI port to VGA with just passive adapters, you would need a conversion device between. It would be cheaper and more effective to use a Mini DisplayPort to VGA adapter.

No Apple Remote or Apple Mini-DVI to VGA Adaptor included with new MacBooks

Hi!
I just picked up a new (black) MacBook yesterday from the Apple Retail Store in Meadowhall (Sheffield). I was quite surprised to open the box and find that the Apple Remote and Mini-DVI to VGA adaptor cable are now optional items and no longer included in the package. Okay, they're not expensive (an extra £30.00 to add both of them), but I just thought I'd mention it to let potential customers know.
I have to say that I'm very pleased at the speed bump and the 250GB hard drive though (you can never have too much space). Also good to have 2GB RAM out of the box (rather than paying an extra £90.00 for the 2GB model). Excellent!

bford0001 - 15% restocking fee? Did you buy it from an Apple Retail store? I bought a black MacBook from them just under two weeks ago (a 2.2 with 160GB HD and 2GB RAM) and they let me take it back and walk out of the store without charging me anything!
One other thing I have noticed - why has the L2 cache dropped to 3MB from 4MB? I know the processor is more powerful, but doesn't that mean it would just about level out, because of the reduction? I noticed the same for the £1,299.00 MacBook Pro and that on the other two models, it's gone up to 6MB. Anyone know how this would change the performance?

Using second display via eMac's mini-DVI to VGA adaptor

Hi,
I've got a 19inch widescreen display from Acer, model no. AL1916W. I have apple's mini-DVI to VGA adaptor and have connected the second display to the point where it mirrors the screen on my eMac, however I don't want it to do this.
What I had intended is that the second display would act as an extension of my eMacs screen, so I can drag windows across for extra space. Is this possible with the eMac?
Put more specifically, I want to be able to put logic's main (arrange) window on the Acer widescreen, and then have whatever else on the eMacs screen? Is there a workaround to do this?
help much appreciated,
Toby

Hi,
It's funny you should send me that link, I actually found that a couple of hours after posting this and tried it. It worked perfectly, I now have the widescreen running in it's native resolution and working as a separate screen which I can drag stuff in and out of. I came back on here to mark the question as 'answered' but I couldn't find how.
thanks for your help,
Toby

Mini DVI to VGA adaptor

Hi - having a frustrating time trying to buy a mini DVI to VGA adaptor for a macbook with a core 2 duo - none on the apple shop, only ones for intel core duo which does not fit (says review)
I need to to connect a monitor to the MacBook. Help

The Late 2008 model 5,1 Aluminum Unibody and the Late 2009 model 6,1 and Mid 2010 model 7,1 White Unibody have a Mini DisplayPort. The Early 2006 model 1,1 through Early 2008 model 4,1s plus the Early and Mid 2009 model 5,2s have Mini-DVI ports.
Here's the various types of Mini-DVI adapters on Amazon.com http://www.amazon.com/s/ref=nb_sb_noss?url=search-alias%3Daps&field-keywords=min i-dvi&x=9&y=13
Here's the various types of Mini DisplayPort adapters on Amazon.com http://www.amazon.com/s/ref=nb_sb_noss?url=search-alias%3Daps&field-keywords=min i-dvi&x=9&y=13#/ref=nb_sb_ss_sc_2_16?url=search-alias%3Daps&field-keywords=mini+ displayport&sprefix=mini+displayport&rh=i%3Aaps%2Ck%3Amini+displayport
To see which model youhave go to the Apple in the upper left corner and select About This Mac, then click on More Info (and then System Report if you’re running 10.7 Lion).When System Profiler comes up check the Model Identifier and post it back here.

Which mini DVI to VGA adaptor?

I have an 800MHz flat screen with a broken display.
I have an old monitor with a VGA cable, but I can't find the correct cable to connect between the iMac and the VGA plug.
I have a mini dvi to VGA adaptor, but it's not correct in that the mini DVI end is female on both the computer and the adaptor chord I have ):
Can someone point me to the correct adaptor cable?
Thanks,
Luke

Hey Luke,
What you need is the mini VGA to VGA adapter like here:
http://store.apple.com/us/product/M8639G/A?fnode=MTY1NDA3Ng&mco=MzI3MTYx#overvie w
If you buy it at the Apple store make sure they understand that that's the adapter you need and for what machine you need to use it on. Then if they give you the wrong one you can take it back.
On a separate tack I had a problem with the socket on a 800 17" that had come off the logic board. Symptom was no video no picture but worked fine with external adapter (mine had to be jiggled a bit to get it to work). I just sent it to Superior Reball to have it resoldered. Cost $51 plus shipping one way. That would take someone knowledgeable to take the iMac apart.
Richard
Message was edited by: spudnuty

Using a VGA monitor with Mac Pro: DVI to VGA adaptor cord & X1900 card

I will be purchasing the MacPro with the ATI Radeon X1900 XT. However, I want to continue using my dual Viewsonic CRT screens till the end of the year until I make the leap to a new LCD display. I know Apple sells a DVI to VGA connector and in fact I believe it to be included as an accessory.
Here is my question:
The graphics card I am buying (the X1900) is designated as a DUAL LINK DVI. The Apple DVI to VGA adaptor cord has a DVI -I SINGLE LINK male connector. Will this DVI-I single link connector properly mate to the female dual link connector on the X1900 graphics card? If it will, I'm probably in business. If it won't, does anyone have an idea for a workaround?
Many thanks, John
G4 dual 450 Mac OS X (10.3.9)
G4 dual 450 Mac OS X (10.3.9)
G4 dual 450 Mac OS X (10.3.9)

The DVI to VGA adapter works fine with the Radeon X1900XT (and the Geforce 7300GT and the Quadro FX4500).
The DVI to Video adaptor works on the Radeon, but not on the two Nvidia cards.
JH
dual 2G G5 Mac OS X (10.4.4) GeForce 6800 Ultra, 2GB DRAM, 30" display

Mini display port to dvi or vga adaptor?

I currently use a MacBook Pro and want to use the mini display port to my 24 inch Samsung LCD screen. My question is should I use the mini display port to DVI or VGA? My Monitor has both ports on back. I know that DVI is Digital and suppose to be the superior source compared to VGA analog, but I have only used VGA when using my Monitor with my old PC and it seemed fine enough for me.
If, I do go the DVI digital route will it be that much better graphics compared to just using VGA?
Finally, has anyone hooked up a mini display port to either DVI or VGA adaptor into an LCD monitor? What are your thoughts, concerns, advice etc. I realize its a very easy thing to do, but seem tied up between using DVI or VGA port.
Thanks,
DH

Diffferences are not remarkable but DVI is indeed better. I wuold then choose DVI.

Mac Mini shows blue or pink tint using DVI to VGA adaptor on 800x600 HDTV

My new Mac Mini won't retain the color settings for this TV/Monitor that is connected via the DVI to VGA adaptor. I've tried to find the display using the Mac utility. I finally got the Mac to create a color profile for the TV by plugging a USB cable from the TV to the Mac, while the VGA cable was also connected. The Mac displayed a new color profile called RCA/ProScan (the TV brand), and the colors looked acceptable. I then saved that color profile. The monitor would then revert to a very blue tint, or a very pink tint without notice. I thought it might have been when I disconnected the USB cable, or when I re-booted the Mac Mini, but I can't detect a cause & effect pattern. I might try to connect the TV using a DVI to S-Video adaptor instead of VGA, but I don't know if it will help. Can someone help? Thanks.

Make sure it isn't a simple cabling problem. Check all the connections and tighten down the thumb screws. The mini is prone to a poor video connection and you need to make sure the video cables are tightly attached.

Is it possible to input itunes into DVI/HDCP input from imac with Apple mini display portS?

Is it possible to input itunes into DVI/HDCP input from imac with Apple mini display port? Or is there another way?

The problem with itunes is needing a computer running it. or continuous internet connection.
A Time Capsule is AC mains powered.. no battery. Although you can certainly buy an older Gen4 TC and modify it ...
https://sites.google.com/site/lapastenague/time-capsule-power-supply-repair-kits
I have run my TC on a 12V SLA battery.. which would neatly meet that part of the functionality you want. But it is heavy and not really the rugged sort of device I think you want.
But I would look at other media players and other ways of storing movies than iTunes.. if you want to carry the whole lot around with you .. A bunch of SD cards even you could plug into the ipad??
External storage for iPad?
A small cheap PC/Mac laptop with a 1TB hard disk in it.. and 11" or 13" screen.. can often be a much better solution than lugging around multiple items so you can fit Apple devices into your life.

RE: Video problems after disconnecting DVI to VGA adaptor...

I was playing a game (C&C Generals) the other day on Vista with an external monitor connected via the DVI to VGA adaptor. During the game, I decided to move my MBP so I disconnected the adaptor. The screen started flickering and I had to reset the MBP. After resetting, I tried to re-launch the game, but an error popped up saying that I don't have DirectX 8.1 or greater (actually, I have DirectX 10) or don't have a supported video card (I have Nvidia 8600 GT). I've tried uninstalling and reinstalling the Bootcamp drivers and resetting my PRAM, to no avail. Any ideas? I tested my MBP on other games (e.g. Company of Heroes) and it works fine -- the only time the video card gives me trouble is when I try to launch C&C Generals!
Thanks for any help!

captainfalero wrote:
I recently upgrade to a macbook pro after my macbook crashed, when I got it home I went to plug in my DVI to VGA cable to find out the port had been changed and i needed to purchase an other one for my new mac. Spent the 20 buck all over again got it home plugged it in and no image on my TV. It seems you need to be a computer scientist to get this to work. Why was this port changed to something that does not work when the previous on worked so perfectly just plug and play????????
Yes blaming your MBP is your first step, but completely illogical. Have you checked the System Preferences>Display? Have you set it up correctly?
Plug and Play, does not mean that an ancient monitor (anything on VGA is several generations ago) will automatically take over your MBP to create the perfect profile. You need to fix things.

Poor colour depth/banding with Apple Mini-DisplayPort-to-VGA adaptor?

I'm using the Apple Mini Display Port to VGA adaptor to hook my MBP up to a projector in the theatre where I give lectures.
I am getting colour depth/ banding issues - images seem to be displayed in thousands of colours, rather than millions, creating really bad banding problems.
I know it isn't an issue with the projector - for comparison purposes I tried playing a DVD through a DVD player connected to the projector, and then through the MBP connected to the projector, and the diference in colour depth was really noticeable. In fact it was virtually unwatchable through the MBP.
Is there a preference pane I'm missing somewhere which will increase the colour depth?
Is there a better adaptor than the Apple one that I need to buy?
Or is this a problem inherent in the minidisplay port to VGA conversion process?
Any tips or pointers would be greatly appreciated.

If your monitor has DVI input, get the DVI adapter. DisplayPort is digital, DVI is digital, but VGA is analog - the signal conversion will result in a (slight) drop in quality.

Mac mini with Apple Mini Display to VGA adaptor

Hello,
I have just purchased a new i5 mac mini, and have started to use it with an HDMI TV. This is great, but I really want to go back to using just my VGA monitor, which is an LGFlatron W2243S.
So, today, with the HDMI plugged in, I put a Apple Mini Display Port to VGA adaptor into the back of the mac mini, hooked it up to the monitor and great. The monitor was recognised, and it actually appeared as a second display.
But then, I pulled out the HDMI lead, and that was the start of the trouble. I now cannot get the LG monitor to work - instead it goes into power saving mode. I have proven the VGA cable, and also noted that the display settings do detect the monitor, but it just keeps going into power saving mode.
Reading on the internet I've found talk of the power from the mini display port being a possible problem.
At the moment then, the HDMI is still plugged in. Any advice on any settings I should be using to get the mini display -> VGA adaptor to work with the monitor? It is obviously working in some form (a) because I can't believe apple would continue to sell a dud product and (b) because it did occur briefly as a second monitor.

I've got some more information which I'm hoping might enable someone somewhere to help!!
So, I've just connected up the monitor again, with success. Both the HDMI and VGA monitor as mirrorred displays.
Then, I removed the HDMI connection, and the VGA monitor stayed on. I was also able to change the resolution successfully on the VGA monitor.
Then I restarted the system. The VGA monitor went into standby and wouldn't wake up from power saving mode (therefore was not able to see the password screen).
Plugged the HDMI back in (as well as the VGA) and restarted. Password screen came up on the HDMI screen. OS started up as normal, then the VGA screen came back to life on mirrored display.
So there is some level of success occuring now, except on restart. It seems as once the OS loads, it sends the signal to the VGA to switch on, but not on the password screen. Note that I do not want the HDMI screen connected - just the VGA. It's really a TV and I want to use it elsewhere.
I also downloaded the DP to VGA firmware update, but even with everything plugged in (and ironically with the VGA on and working!) it says that it cannot find a DP to VGA adaptor!!
This all suggests to me that things work, but that there's something I'm not quite doing right somewhere. My PC connects to the VGA monitor fine, and comes on at power up.
Thanks in hope.

Nvidia 7300GT card compatible with Apple's DVI to VGA Adaptor?

To rephrase, is the Mac Pro's stock Nvidia 7300 GT card able to support the Apple DVI to VGA connector which would allow me to connect a Viewsonics CRT? And will that card also allow me to connect a second CRT for dual monitors?
A temporary setup for a few months until I buy new Apple Displays...
Many thanks,
John

The card used with the adapter allows use of standard VGA monitors. There is always the chance that it won't, due to some irregularity, but I doubt it. Many have posted using VGA monitors and having no issues. Apple issues the adapter for your type of scenario.
Michael

Mini-DVI to VGA flicker with Snow Leopard and 2nd monitor

I have a 24" iMac (fall 2007) and recently purchased a 26" Vizio (VMM26F10I) and connected it as a 2bd monitor for my iMac using the Mini-DVI to VGA adapter Apple sells.
The new monitor will flicker now and then and some times will go to no signal. I have to change resolutions to something else and then back to standard setting to get it to come back or unplug adapter and plug back in.
Is there a fix for this?

26" VGA...? Which resolution/frequency? Have you tried a fresh cable with clean connectors, etc....
What did Vizio say when you contacted them with this question about your new purchase?

HT3382 DVI to VGA adaptor with Apple Mini

Similar Messages

Maybe you are looking for