HT3406 how can i pass "could not active iphone" when I want to use an old iphone 4 as ipod?

I have old iphone 4 like to use as ipod. How can i pass "could not active iphone", I just want to use it as ipod.
thnak you.
Vivo

Using an iPhone without a wireless service plan

Similar Messages

How can I keep bootable partitions from showing when I want to use my usb stick without the option command at boot up?

Im using a usb stick with bootable diagnostic partitions and a extra partition for diags that run in the OS. When i want to use diagnostics from this extra partition on a mac thats already booted, I have to wait for all the bootable partitions to mount as well as the one partition that I need. Is there a way to hide these bootable partitions when using the usb drive as a storage device to run diags in the OS?
Thanks

I think I may have to look into a redirect line in my htaccess file so that direct loads of my mp3's route through my website page.
If you do this you may find iTunes won't read the files, so I should test carefully on one file first if possible.

How can i solve "could not load language and text preference "

how can i solve " could not load language and text preference ".. help everyone...

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up guest users” (without the quotes) in the search box. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
*Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode.
Test while in safe mode. Same problem?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

HT201250 how can i pass information from one mac to another mac by using the time capsule

how can i pass information from one mac to another mac by using the time capsule

If you want to transfer files, settings, etc., you must open Migration Assistant (Applications > Utilities) in the Mac that you want to transfer the files and follow the instructions

What can I do if my iphone4 is not turning on and itunes is saying "Session could not be started" when I want to sync it so I can restore my phone?

What can I do if my iphone4 is not turning on and itunes is saying "Session could not be started" when I want to sync it so I can restore my phone?

Hold down your on/off and home button until you see the Apple logo, but first plug your iPhone into a power outlet to make sure it has enough battery power.

Error: One or more categories of approval could not be loaded when user wants to approve

Two of my PM's are getting the error shown in the title of this post (Error: One or more categories of approval could not be loaded when user wants to approve).    The "Related Topic" issues a work around of using the rules to "automatically approve the
offending items".   This did not work for us.   Has anyone else experienced this issue?
Thanks,
~RK

Hi Marc - Per ytour request:
The PM does the following:
1. Access PWA Home page and review messages
2. Clicks on “You have 1 timesheet from resources pending your approval” message
3. Approval Center Page loaded with “Error: One or more categories of approval could not be loaded” and “There are no new approvals to review at this time. If you have published your plan and
still do not see approvals, have your resources submit updates from “Tasks” of “Timesheet”” messages.
We've made certain the Schedule is published and the timesheet was submitted correctly.
Expected behavior: Timesheet records should be available for review and approval.   Instead, the PM gets the screen below with the error message

I want to use my old iphone for my kids as an ipod. How do I keep from getting text messages on it when it is turned on? If it is on, and my droid razar is on, text messages will go to the iphone. It is either a 4 or 4s ...I don't have Siri, so I think

I want to use my old iphone for my kids as an ipod. How do I keep from getting text messages on it when it is turned on? If it is on, and my droid razar is on, text messages will go to the iphone. It is either a 4 or 4s ...I don't have Siri, so I think it's a 4. Thanks

Another thing to remember is the phone is actually usable for 911 calls and maybe others. Not a real good idea. Especially for a child.
It would depend however on the age of the child.
Good Luck

How can I pass the icloud activation on my iphone 4

I bought an iphone 4 for about 2 years ago......i forgot my apple ID and my password because I didn't use it a lot....now I restored my iphone and it asks for my old apple ID and password ....please tell me how can i pass that ?

You can't get around it. You will have to enter the correct ID and password in order to activate it. If you don't know your ID, you can try to find it as explained here: http://support.apple.com/kb/HT5625. If you don’t know your password you can reset the password as explained here: http://support.apple.com/kb/PH2617.

How can I get a search bar added when trying to archieve emails in my IPhone's email app?

My IPhone email app is connected to my Outlook email system in which I have many archieved folders, when I want to place an email in my archieved folders on my IPhone I have to scroll a long list of archieved folders to find the right one, how can I get a search bar added to find it easier? My colleague' s Samsung has that function already and can't believe that Apple can be behind Samsung on this.

You probably will not be able to get a refund. The iTunes Store makes it pretty clear that gifts are redeemable only in the same country, and the terms of sale say that all sales are final. But you can contact the iTunes Store and ask:
http://www.apple.com/support/itunes/contact.html
For future reference, you will not get responses from Apple to any question you ask in these forums. We're all just fellow users here. And you posted in a forum for questions about the Communities themselves. You usually will get the quickest and most applicable answers if you ask in the forum dedicated to the product or service about which you are asking.
Regards.

HT4137 I purchased the iPhone 5 switched from iPhone 4S, how come if I delete a contact or add on my old iPhone it shows it on my new iPhone? How can I make it stop I'm planning on someone else using my old device

I transferred from an iPhone 4S to an iPhone 5, everything switched but it seems to be synced to my old phone. Info I delete or add a contact or music it will then do the same on my new phone. A family member will be using my old phone , how do I get it to stop syncing what I do?

If you have everything that you need on your iPhone 5 then do this to the iphone 4.
Go to settings - general - reset - erase all contents and settings - this will wipe your phone clean.
Then you can give it to your family member for use.

How can i find my stolen iphone? Because when i want to use Find my Iphone app,but it writes an eror.

Hi.
First of all,congratulation for your devices and its systems.
I have a question:
I want to know haw i can fine my stolen iphone by find my iphone app.
When i use find my iphone app and i enter my information,an eror is appeared contains your connection faild,please try later.
I see this eror when i have connected.
Thanks for your helping.

Hi Malekgl,
If you have had your iPhone stolen or it has gone missing, you may find the following article helpful:
Apple Support: What to do if your iOS device is lost or stolen
http://support.apple.com/kb/ht5668
Regards,
- Brenden

HT3228 i keep getting these message on my iphone when i wanted to use my email (the connection to the server failed) and this has never happen before now , what can i do email me on anthod33@yahoo.co.uk

how do i resolve these problem, it's difficult to get my mail on my iphone again it keep telling my that THE CONNECTION TO THE SERVER FAILED

Hi StuNYC,
Welcome to Apple Support Communities.
It sounds like you're seeing an alert message when opening Mail on your iOS devices. Do you have multiple email accounts setup on the devices? Take a look at the article below, it provides suggestions that will resolve most issues that cause an alert like that to appear in when starting the Mail app.
iOS: Troubleshooting Mail
http://support.apple.com/kb/ts3899
I hope this helps.
-Jason

How can i pass array as argument in magento api method calling using sudzc API in iphone Native APP

0down votefavorite
I am implementing magento standard api method in native iphone app. I use webservice generated by sudzc. To call method I use:
[service call:self action:@selector(callHandler:) sessionId:@" " resourcePath:@" " args:@""];
When I used methods e.g. cart.info or product.info in which I have to pass one parameter; it gives valid response. But when I used method e.g. cart_product.add in which I have to pass an argument as value of array it gives error
SQLSTATE[42000]: Syntax error or access violation:
1064 You have an error in your SQL syntax;
check the manual that corresponds to your MySQL server version for the right syntax to use near ')' at line 1
I have tested in SOAP UI also. There also it gives me same error. But same method works in PHP file. Even I tried by creating same soap request which I created using JavaScript but still it doesn't work.
Can anyone help me to pass array as a parameter using sudzc api to call magento web services?

There is an error in your SQL.

How can I make Reader the active window when opening documents?

I am having trouble with this because right now documents open in the background and Adobe Reader does not become the active window. This requires an extra click on Adobe to bring the opened document to the foreground.
Nowhere to be found in Preferences.
My system is Linux RedHat 2.16.0
Adobe Reader 9.3.1
Thanks a bunch.

Sir,
Inspect the following methods (all available to, say, a JFrame) - they might help you out:
setVisible
setState (to (de)iconify)
toFront (request to bring to front)
requestFocus

How can i pass sql string in proc as in parameter and use in cursor forloop

Dear Experts ,
Please help me in below code.
create or replace PROCEDURE Sample_Spool_Data (SQLSTRING IN VARCHAR2, FILENAME in VARCHAR2) IS
v_spool_file UTL_FILE.FILE_TYPE ;
SQLSTRING VARCHAR2(1000);
BEGIN
v_spool_file := UTL_FILE.FOPEN('MPLD_DQMT',FILENAME,'w');
UTL_FILE.PUT_LINE(v_spool_file,'Start: '||to_char(sysdate,'dd/mm/yyyy hh:mi s'));
FOR c1_rec in SQLSTRING
LOOP
UTL_FILE.PUT_LINE(v_spool_file,c1_rec.rec);
end loop;
UTL_FILE.PUT_LINE(v_spool_file,'End: '||to_char(sysdate,'dd/mm/yyyy hh:mi s'));
SQL String is having like select col1, col2, col3 from table_name;

Looks like you're tring to write a generic way of outputting the results of a query to a file.
You won't do it the way you're trying to, because your dynamic SQL means that you don't know the resultant columns of the query so that you can output them. To do that you need to use the DBMS_SQL package to describe the query and fetch the returned columns by position e.g.
As sys user:
CREATE OR REPLACE DIRECTORY TEST_DIR AS '\tmp\myfiles'
GRANT READ, WRITE ON DIRECTORY TEST_DIR TO myuser
/As myuser:
CREATE OR REPLACE PROCEDURE run_query(p_sql IN VARCHAR2
                                     ,p_dir IN VARCHAR2
                                     ,p_header_file IN VARCHAR2
                                     ,p_data_file IN VARCHAR2 := NULL) IS
v_finaltxt VARCHAR2(4000);
v_v_val     VARCHAR2(4000);
v_n_val     NUMBER;
v_d_val     DATE;
v_ret       NUMBER;
c           NUMBER;
d           NUMBER;
col_cnt     INTEGER;
f           BOOLEAN;
rec_tab     DBMS_SQL.DESC_TAB;
col_num     NUMBER;
v_fh        UTL_FILE.FILE_TYPE;
v_samefile BOOLEAN := (NVL(p_data_file,p_header_file) = p_header_file);
BEGIN
c := DBMS_SQL.OPEN_CURSOR;
DBMS_SQL.PARSE(c, p_sql, DBMS_SQL.NATIVE);
d := DBMS_SQL.EXECUTE(c);
DBMS_SQL.DESCRIBE_COLUMNS(c, col_cnt, rec_tab);
FOR j in 1..col_cnt
LOOP
    CASE rec_tab(j).col_type
      WHEN 1 THEN DBMS_SQL.DEFINE_COLUMN(c,j,v_v_val,2000);
      WHEN 2 THEN DBMS_SQL.DEFINE_COLUMN(c,j,v_n_val);
      WHEN 12 THEN DBMS_SQL.DEFINE_COLUMN(c,j,v_d_val);
    ELSE
      DBMS_SQL.DEFINE_COLUMN(c,j,v_v_val,2000);
    END CASE;
END LOOP;
-- This part outputs the HEADER
v_fh := UTL_FILE.FOPEN(upper(p_dir),p_header_file,'w',32767);
FOR j in 1..col_cnt
LOOP
    v_finaltxt := ltrim(v_finaltxt||','||lower(rec_tab(j).col_name),',');
END LOOP;
-- DBMS_OUTPUT.PUT_LINE(v_finaltxt);
UTL_FILE.PUT_LINE(v_fh, v_finaltxt);
IF NOT v_samefile THEN
    UTL_FILE.FCLOSE(v_fh);
END IF;
-- This part outputs the DATA
IF NOT v_samefile THEN
    v_fh := UTL_FILE.FOPEN(upper(p_dir),p_data_file,'w',32767);
END IF;
LOOP
    v_ret := DBMS_SQL.FETCH_ROWS(c);
    EXIT WHEN v_ret = 0;
    v_finaltxt := NULL;
    FOR j in 1..col_cnt
    LOOP
      CASE rec_tab(j).col_type
        WHEN 1 THEN DBMS_SQL.COLUMN_VALUE(c,j,v_v_val);
                    v_finaltxt := ltrim(v_finaltxt||',"'||v_v_val||'"',',');
        WHEN 2 THEN DBMS_SQL.COLUMN_VALUE(c,j,v_n_val);
                    v_finaltxt := ltrim(v_finaltxt||','||v_n_val,',');
        WHEN 12 THEN DBMS_SQL.COLUMN_VALUE(c,j,v_d_val);
                    v_finaltxt := ltrim(v_finaltxt||','||to_char(v_d_val,'DD/MM/YYYY HH24:MI:SS'),',');
      ELSE
        v_finaltxt := ltrim(v_finaltxt||',"'||v_v_val||'"',',');
      END CASE;
    END LOOP;
-- DBMS_OUTPUT.PUT_LINE(v_finaltxt);
    UTL_FILE.PUT_LINE(v_fh, v_finaltxt);
END LOOP;
UTL_FILE.FCLOSE(v_fh);
DBMS_SQL.CLOSE_CURSOR(c);
END;This allows for the header row and the data to be written to seperate files if required.
e.g.
SQL> exec run_query('select * from emp','TEST_DIR','output.txt');
PL/SQL procedure successfully completed.Output.txt file contains:
empno,ename,job,mgr,hiredate,sal,comm,deptno
7369,"SMITH","CLERK",7902,17/12/1980 00:00:00,800,,20
7499,"ALLEN","SALESMAN",7698,20/02/1981 00:00:00,1600,300,30
7521,"WARD","SALESMAN",7698,22/02/1981 00:00:00,1250,500,30
7566,"JONES","MANAGER",7839,02/04/1981 00:00:00,2975,,20
7654,"MARTIN","SALESMAN",7698,28/09/1981 00:00:00,1250,1400,30
7698,"BLAKE","MANAGER",7839,01/05/1981 00:00:00,2850,,30
7782,"CLARK","MANAGER",7839,09/06/1981 00:00:00,2450,,10
7788,"SCOTT","ANALYST",7566,19/04/1987 00:00:00,3000,,20
7839,"KING","PRESIDENT",,17/11/1981 00:00:00,5000,,10
7844,"TURNER","SALESMAN",7698,08/09/1981 00:00:00,1500,0,30
7876,"ADAMS","CLERK",7788,23/05/1987 00:00:00,1100,,20
7900,"JAMES","CLERK",7698,03/12/1981 00:00:00,950,,30
7902,"FORD","ANALYST",7566,03/12/1981 00:00:00,3000,,20
7934,"MILLER","CLERK",7782,23/01/1982 00:00:00,1300,,10The procedure allows for the header and data to go to seperate files if required. Just specifying the "header" filename will put the header and data in the one file.
Adapt to output different datatypes and styles are required.

HT3406 how can i pass "could not active iphone" when I want to use an old iphone 4 as ipod?

Similar Messages

Maybe you are looking for