HT3415 Ive formatted my iMac and now the applications disc will not install on my computer

Ive formatted my iMac as I am selling it on and now the applications disc will not install on my computer.

Isaac, Two knowledge base articles that may be of further help are:
Reinstalling Mac OS X 10.6http://support.apple.com/kb/PH6606
and Reinstalling Application Software that came with Mac OS X 10.6
Be sure to read them through if you have any further problems.
Regards,
Ralph

Similar Messages

  • I just ran the 9.1 update for CF and now the adminastrator page will not load

    I just ran the 9.1 update for CF and now the administrator page will not load, the site runs but that is it I know I'm missing something. I have rebooted the server. No change and all the services are running. I am on the server not trying remotely .
    Message was edited by: Norman Rothwell

    Hi Norman,
    Can you please confirm if you ran the Update 9.1 or any patch.
    Regards,
    Priyank

  • I have changed the name and password for my Time Capsule and now the Time Machine will not connect

    Mac Book Pro
    1TB Time Capsule.
    Yesterday I changed the name and password on my time capsule and also the name and password of the wifi network as I was having problems with the speed of the internet when using Safari on any of my devices (1 Macbook pro, 1 macbook air, 27" iMac, iPhone and iPad) all other internet services were working fine (email etc.) This seems to have solved the problem.
    However, since then, my time machine back ups will not reconnect and there is no option for me to reconnect to the existing back up for my macbook pro.
    When I enter the time machine preferences it shows as below that there are no back ups.
    Then, when I go to select a drive to use which should be the MacBook under the Backup disks the only option is for me to Remove Disk...
    So, my question is, how do I reconnect to an existing Time Machine back up for my MacBook pro as I really do not want to erase and start all over again.
    Warning - In my naiveté, I did click on the MacBook in 'Available Disks' but I got the impression that it was about to start a whole new back up and not work with the existing one.
    (And does anybody have an inkling as to why there was a problem with Safari on all my devices? I downloaded Google Chrome and that worked fine).

    Simply reset the Time Machine.
    See A4 here http://pondini.org/TM/Troubleshooting.html
    You can then mount the TC disk in finder after you reboot the computer.
    You should be able to reselect the TC disk and then it will say it is going to start a new backup.
    Ignore this.. when the TM actually loads the TC disk it will discover the existing backup and continue the backup.. but it will give no hint until it actually starts that it won't start a new backup. you just have to believe it won't.. and mostly it works..
    Please also install the widget A1 so you have some idea what TM is doing.

  • We just added Maverick to our Mac and now the magic mouse will not scroll with finger tips!!

    We just upgraded our system to Maverick. Now our majic mouse does not respond to the finger swipe at all.
    Also the volume contro;s stopped working on the wireless keyboard.

    Hi davidgraham193,
    Thanks for visiting Apple Support Communities.
    If your Magic Mouse is not scrolling, first go to the Mouse section of System Preferences and try toggling the "Scroll direction: natural" checkbox to see if it has an effect.
    Scroll direction: natural:
    Select this option to move the contents of a window the same direction as your fingers.
    From:
    OS X Mavericks: Change the way your trackpad works
    http://support.apple.com/kb/PH13804
    If the issue persists, see this link for additional troubleshooting steps:
    Troubleshooting wireless mouse and keyboard issues
    http://support.apple.com/kb/ts3048
    Best,
    Jeremy

  • Downloaded latest version of FF and now the Yahoo toolbar will not display when I enable it to?

    I have checked the settings for displaying the Yahoo toolbar on FF. Has always worked fine until now?

    Finding where to get the new versions of Firefox or the Yahoo toolbar is not the problem, I know where those are since I have uninstalled and downloaded them both 3 times...but last night did find some solution when I logged out of Yahoo to log on with one alternate ID I use, when I did that the toolbar showed up.
    So I logged out ad back in with my primary ID and it still showed up. But I did see if I logged out, closed Firefox, open Firefox again and sign in with my primary ID the tool bar once again doesn't display until I log back out back on again.

  • I entered a mistake in my passcode and now the passcode window will not accept my correct passcode. What can I do?

    since i upgraded to ipad 7 ( i think thats what it was) i have been required to put in a passcode every time I open up. ( This is extremely annoying!!) Now since I entered my passcode ( why does it have to suddenly be called a passcode and not password ... as if its not bad enough to have "passwords", IDs,etc etc!!)  with an incorrect letter included in it the ipad will not accept my correct password. I am unable to access settings of course so I just do not know what to do. Can someone more ipad litereate than I help me.

    iOS: Forgotten passcode or device disabled after entering wrong passcode

  • I tried to set up a remote desktop between my macmini and my work computer.  I hit cancel and now the Remote Desktop will not close.  I cannot shut down my computer either.  How do you close a non-responsive application.  I have tried everything!

    I tried to set up a remote desktop connection between my MacMini and my work computer.  It was not working so I hit cancel, but then the big black screen of death came up and will not go a way.  I cannot close my computer nor quit the remote desktop connection.  How do you close a non-responsive application?  By the way, I am new to Mac and it is not as simple as hitting the Control, Alt, Delete.  Please help.

    virginiafromphoenix wrote:
    .......How do you close a non-responsive application?.......
    Try ( alt + cmd + esc ).  Gives you a menu of running applications, and a chance to "Force Quit".

  • I've moved and now the itunes store will not let me update my account to match the bank records. It gives me the error "Your credit card information does not match your bank records." when in fact it does.

    Nothing on Apple's services has worked correctly since they started this iCloud c**p. Did anybody there actually think this through before implementing it? I can't get on iCloud because I only have one email account and it's associated with no less then three Apple IDs (their server hiccups and I get locked out.) Now I can't make purchases in iTunes.

    If you are getting a message stating that you are not verified. Then you might have not received the iTunes Store verification email. You will need to contact iTunes Customer Support. They will be able to verify your store account. Then you will be able to sync your iPod Touch while signed into your store account. Your iPod Touch should allow you to purchase your Apps from that point on.

  • I have downloaded newest version of itunes and now the itunes store will not open the bar gets about half full and doesnt go any further and i get no messages.

    can anyone help with this issue

    Even though you're using a later version of iTunes, I'd first try the following document:
    iTunes 9: "One Moment Please" or "Error (-50)" message when accessing iTunes Store

  • Just formatted my mac but iLife (from original disc) will not install

    hi all!
    I've done a routine format of my Macbook Pro 13" a couple of weeks ago, it all went well but I seem not to be able to install the bundled applications from the orignal, grey cd that came with my mac.
    I insert the cd, start the procedure then just after keying in my admin password the insatllation stops...i.e. it fails to start.
    As new, my machine runs OSX 10.6.6 but I've already upgraded to 6.8 ... I've tried to install iLife before and after upgrading.
    I've been to an Apple Store — since my laptop is less than a year old — but they say warranty doesn't cover software...in any case, I've also tried to install an iPhoto downloaded from the internet, but with the same results, so I'm thinking it might not be a corrupt disc...
    Any idea other than re-formatting the machine?
    thanks!
    dani

    Erase and install 10.6 again, but this time use the Security Option > Zero All Data on the drive, you have bad sectors.
    Reducing bad sectors effect on hard drives
    How to erase and install Snow Leopard 10.6
    If that doesn't work, then your cd is bad. clean it and try again or try extracting iLife using Pacifist. (but you need your bad sector issue resolved)
    Also run through this list and get back with me, I doubt anything else is a problem on a fresh install, but there might be.
    Step by Step to fix your Mac

  • I have recently upgraded my iMac Intel G5 iSight to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old sys parts

    I have recently upgraded my iMac Intel G5 iSight (iMac5,1) to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old system parts. I have zapped PRAM. The blue indicator in system audio panel will appear for a second as I slide the bar for internal mic but then it disappears. Is there a fix?

    The sound seems very faint but can here static on playback.

  • I have just installed a new hard drive in my imac intel 20" (2006) and now the hard drive does not show up in the 'select destinations' folder of the install program.

    I have just installed a new hard drive in my imac intel 20" (2006) and upgraded the memory and now the hard drive does not show up in the 'select destinations' folder of the install program. I can see the hard drive in the disk utilities window however it wont let me do anything.
    It is a seagate 1TB SATA II drive however it is displaying it as a 7.3 TB.
    If anyone has any suggestions I would be happy to hear them.
    I have tried to erase and partition and get the same error message each time, 'Input/Output error'.
    I have tried starting the thing with the install disk which is Mac OS X (Tiger?) which came with the computer. No good.
    Anyone?

    Thats correct. I can see it in the list however when I attempt to erase it or partition it it's like it's not being found or recognised and it throws up the input/output error message. I am pretty sure that the sensor it attached correctly and it is a SATA drive. I can see all the infor regarding the drive when disk utility is open and it all looks good but I cant access it or do anything with it. It's taunting me!
    The install disk is in the drive and the install program runs right up to the point where you have to select the location for the install and there is just nothing in the box where you have to select the hard drive icon.
    I have my suspiscions about the drive but any help would be appreciated.

  • I formatted my macbookpro and followed the usual instructions to re-install but I get a message : Could not find installation information for this machine. This was at the OS X Utilities.My macbook is now blank.

    I formatted my macbookpro and followed the usual instructions to re-install but I get a message : Could not find installation information for this machine. This was at the OS X Utilities.My macbook is now blank.

    Try booting into Internet Recovery mode (booting whilst holding down the command, option and R keys). It will take a while to load as you're booting from Apple's servers across the Internet.
    Once there, use Disk Utility to erase the "Macintosh HD" partition. After the drive is formatted try reinstalling the OS.
    Good luck,
    Clinton

  • HT2674 I have an iMac purchased in May 2011.  OSX Lion 10.7.3.  I deleted backup file from the external hard drive. Now, the trash can will not empty some of the files deleted.  File folder: "Core Services" contains a locked file: "boot.efi".  It will not

    I have an iMac purchased in May 2011.  OSX Lion 10.7.3.  I deleted backup file from the external hard drive which operates from Time Machine.
    Now, the trash can will not empty some of the files deleted from the backup harddrive.
    The trash contains-- File folder: "Core Services" which contains a locked file: "boot.efi". 
    It will not delete.
    How do I get the trash can empty of these files?

    Yes, the Old Master file has a folder for each year where I find all photos from that specific year. I am attaching a screen shot of the file.
    In the meantime i have managed to download all photos (it did not download any video files though in mpg, avi, 3gp, m4v,mp4 and mov format) to a new iphoto library. Unfortunately the photos are quite mixed and often doubled up. I ma considering to purchase iphoto library which checks all duplicates in iphoto. this will save me a lot of time. What do you think?

  • I just switched from Outlook to Mail and now the sent messages are not being displayed.  Help, please.

    I just switched from Outlook to Mail and now the sent messages are not being displayed.  Help, please.

    Back up all data. Rebuild the mailbox.

Maybe you are looking for